Void a printed check run

Please tell me what transaction code to use so I can void an entire printed Accounts Payable Check Run.
Points will be awarded .
Thanks!
Kathy

Thats the reason I suggetsed to use FCH9. There is no transcation code that exists for deletion of range of checks.
In future if you encounter the same, then I suggest you to use LSMW to delete without going one by one. This as a work around you can use.
FCH3 is not for your requiremnt. This is used when in the cheque lot if you have some unused checks which were torn or damaged then you use this tcode.
By using FCHD you have deleted the check information for the payment run but the vendor or customer acount line items were cleared.
Try FCH7

Similar Messages

Conditions for voiding the printed check

Hi,
I need some information regarding the standard check prin program RFFOUS_C. Please let me know all the conditions for which the program voids the checks.
Regards,
Jaydip

Hi Jaydip,
Print program will void the check numbers that are damaged or unused due to various reasons. You need to input the check numbers that are to be voided to the payment run program or directly to RFFOUS_C program.
Pls go thru following link for more clarification:
http://help.sap.com/saphelp_46c/helpdata/en/01/a9d11a455711d182b40000e829fbfe/frameset.htm

VOID PRINTED CHECK

Dear All,
can any one give me the procedure for void the printed check.
If I get the answer ASAP I would be appreciate.
Thanks in advance
Regards
srinivas

Hi Srinivas,
For That you have to do reset the cleared document data in FBRA and there you void the check or individualy void the check in FCH9.
May be this information is useful to you
Regards
Surya

F110: What is best method in voiding an EFT payment after check run?

What is the best method in voiding or reversing an EFT payment after a check run (F110)?
Thanks!

have you figureed it out?
if I didn't remember wrong, we first find the clearing document number in proposal log, and used FBRA to reset the clearing items, then reverse the document
I am also interested in setting a dummy check number for EFT, anyone can throw some ideas here?
thanks
Keqin

F110 printing checks at payment run stage

Hi All,
while hitting payment run button(F110), system is scheduling background job which is including all 3 steps:
SAPF110S
SAPFPAYM_SCHEDULE
RFFOUS_C
thus as soon as user hit pmnt run SAP is printing check also. thus printout tab is not useful. this has happened today for the first time intermittently.
earlier SAP used to create new job as soon as user click on printout which includes 2 steps:
SAPFPAYM_SCHEDULE
RFFOUS_C
i am sure this has no relation with the parameters maintained by user.
please help.
Regards,
Abhi

Hi! Even I am working in ECC 5.0 and I want to print checks from the payment program with a SAP SCRIPT Form, but the issue is that we hav the standard print program for printing the form and this form is being used by some other custom program....I want to customize the standard print program in the transaction F110 so that It successfully calls that form which is now called by some other program. I've the option of customizing the standard print program as per the program which is calling that Form but I'm not able to understand the flow of either of the print programs. Can anybody guide me here on how to understand the flow of the print and go for the customizing of the standard print program for the payment process?
Also, the current print program and Form which is being used by some other custom print program is already customized in the transaction FBZP.
Thanks in advance
Shamim

Checking default printer before running a report

Hi guys,
I'm trying to run a report directly from a form on the Web. However, at form runtime, the only thing known is DESTYPE ('PRINTER') but DESNAME is not. What I would like the form to do first is to check the user's local machine's default printer before running the report, and maybe show a message like: 'Oops, wait a minute dude! Your default printer is 'X', please change your default printer to 'Y' before proceeding.' Or something to that effect. After the change, of course, 'Y' (the name of the printer) gets passed on to DESNAME, and the report printing proceeds from thereon. Well, I think you get the point. Any cool ideas?
null

I can't tell the exact solution.
But just check the Oracle Reports Remote Printing Utility(ORARRP).
U can download this from oracle website.
Using this u can generate o/p to a file and then a double click on that file will display a popup with all the printers accessible for that m/c.
Thx,
Rgs,
Raj

I am running Quickbooks Online and need a pdf viewer plug in for Firefox 5 in order to print checks. Is it available and if so where?

After writing a check in QBOL it shows it in a pdf viewer within my browser. After upgrading to FIREFOX 5 I can not print checks correctly as the earlier pdf viewer plug in is nit compatible with Firefox 5

Try the version posted here:
Blaq Blog - Firefox 4 Mac PDF Solution:
* http://www.blaqapp.com/blog/110329-Firefox-4-Mac-PDF-Solution
You need this extension to overcome the compatibility problem.
*Add-on Compatibility Reporter: https://addons.mozilla.org/firefox/addon/add-on-compatibility-reporter/

No values in the LOV when trying to print checks

I am trying to print checks from Payables with XML Publisher, I have been able to get a concurrent job that shows the XML being generated and it is correct for the template/data definition I want to print on. when I run the XML Publish reports job and get the properties window to select the request ID and template It gives me a no values in this LOV error, I can go back to the requests and see the output,
I have the Format Payments Concurent request program set up as Output = XML, STyle = Portrate - Laser Checks, Printer = HP_4300, and there is checks in Save, Print, Style Required
The log from the request is this:
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXPBFEL module: Format Payments (Evergreen, Laser)
Current system time is 03-NOV-2005 13:41:50
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='20051103USD_1'
Execution options
p_printer_code_mask="101,102,111,112,121,122,141,201,202,211,212,221,222,241" p_sig2_amount="1000" p_sig3_amount="" p_sig1_vendnum="" p_sig2_vendnum="" p_sig3_vendnum="" p_continuous_stationery="N"
XML_REPORTS_XENVIRONMENT is :
/u01/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /u01/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 12671
Xlib: connection to "oracle2:0.0" refused by server
Xlib: No protocol specified
REP-3000: Internal error starting Oracle Toolkit.
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
MSG-00004: After Get_Base_Curr_Data
MSG-00125: Laser check printing escape sequences have been activated.
MSG-00800: Getting Payment Batch details....
MSG-00007: After Custom_Init
MSG-00008: After populate_mls_lexicals
MSG-00044: ********** VOID **********
MSG-00020: After SRWEXIT
MSG-01002: Updating payment batch status....
MSG-01003: Deleting AP_CHECKRUN_CONC_PROCESSES record....
Report Builder: Release 6.0.8.25.0 - Production on Thu Nov 3 13:41:51 2005
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 419245
Number of copies : 0
Printer : HP_4300
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 03-NOV-2005 13:41:52
---------------------------------------------------------------------------

I know this is a little late. I recently had the same issue. The LOV showed the values properly in our Vision instance, but it didnt work in our Test instance. Oracle support wasnt able to pinpoint it. I discovered that the problem was with a particular System profile option (CONC_REPORT_ACCESS_LEVEL). It was set to null. It should either be set to "User" or "Responsibility". This particular value is used in the "WHERE" clause for the SQL statement used to fetch data for the LOV. You can check these settings using the Sys Admin responsibility.
Now, if I can just get my XML report (AP Checks) to run in a single step, instead of two separate steps... :)
I hope this helps. Regards, Mark.

Check Run Issue

Hi Guru's,
HI Guru's,
I have a an issue with the check run. Created a check run yesterday and went through all the steps...
- Parameters have been entered
- Payment proposal created
- Payment run has been carried out
- Posting orders 77, generated, 77 completed.
*- Printing Data and log have been deleted *
I can not remember what I click on and it caused this.
Please can someone help and tell me know how can I either re-run this check run I mean the physical checks or how can I go about this and delete this run and re-run from Scratch.
Best Regards,
Yasmeen

You could try going to tcode SE38 and then execute RFFOUS_C program from there.
Select your check variant, enter the same program run date and ID that produced your 77 checks.
Look over your print controls to make sure hte correct printer is populated.
Scroll down to the very bottom of the screen and check "Void and reprint checks from payment run already printed."
Enter the Check Numbers that was produced before.
Enter a Void Reason Code.
Hope that helps.
Cindy

Error in Print checks in F110

Hi ,
I am facing errors in the checks number sequence in F110.
For example, payment run today was supposed to pay 6 vendors (starting with 7xxxx)
Proposal run was all correct but when the printing started, 57 printed checks came out with values paid on July 12 with vendors starting with (1xxxx). We were expecting only 6 checks.
The check number ranges in FCHI updated 6 numbers, however, it printed 57 in the total and now we can not void the remaining 51 because SAP does not recognize.
Any ideas what might have happened in SAP ?
Regards,
Rogerio

Rogerio
Please analyse the checks that have been printed vis-a-vis what had to be printed. There could be many things that are wrong here. Like my friends have said, the number of invoices could have been 57!! According to you, 6 checks need to be printed. This is based on the numbr of vendors...Now are the number of invoices 6? Also like my friend has said review the configuration in FBZP. You should also check the Vendor master data where in the automatic payment transaction, there is a check box for Individual Pmnt. When this is ticked, the payments are not grouped together.
Please review these and let us know so that there could be a solution for you.
Karthik

Check run in F110

Hello Friends,
A check run was done using F110 which worked fine. When the checks were printing the paper jamed and in the middle of the run. So half of the checks were printed fine. How do I void the bad checks and reprint what was left using the same check numbers. The rest of the batch was printed on white paper not the checks so I would like to use those checks instead of wasting them. Please guide me on how I can fix this problem. Thank you inadvance for your help.
Monika

Hi Monika,
Please check your vendor Accounts it s cleared? its clear
you go to T code FCHN here available Doc No and Check number also. based on document no and check no you can print manually remind checks T code FBZ5
Regards,
K.Satish

Void multiple PY checks not through off cycle work bench

Hello,
We had a scenario where we had to void nearly 60 regular PY checks in our previous period. The postings to FI did not happen yet. We went to off cycle work bench and voided 60 checks one after the other.
Is there any quicker way to void multiple PY checks (If we know the check number to void). What if we run into a scenario where we need to void few hundreds.
Any advice is greatly appreciated.

Hi Priya,
I feel you have got answer of this query.... as it was processed through another thread. I will request you to close this thread as for a question 2 threads are there. And if moderator will see it then they may block the thread.
- Praveen

How to print Checks in certain order than by Vendor Numbers?

We need to print certain batch of checks in different order than SAP standard(Vendor Number), is there anyway to make SAP to print them in different order?
Thanks in advance for the assistance.
Points will be awarded.

hi Frank,
Banking>Outgoing Payments>Checks for Payment . From that window you can access the print layout for checks and customise it to suit your requirements.
or,
If you are using SBO 2005, I would recommend going to Banking > Document Printing... See help details as pasted below.
Prerequisites
The following definitions are set:
· The required parameters in Administration > System Initialization > Print Preferences >Per Document tab >Checks for Payment option
· The print-related parameters for each house bank account in Administration > Setup >Banking >House Bank Accounts.
Procedure
1. Choose Banking >Document Printing.
The Document Printing Selection Criteria window appears.
2. In the Document Type field, select Checks for Payment. Enter all other parameters and choose OK.
The Print Checks for Payment window appears.
3. All checks are selected by default. Deselect checks that you do not want to print.
4. Ensure that the Next Check No. is correct. Change it if necessary.
5. Load the printer with the correct check pages or blank paper. Then choose Print.
The Check Number Confirmation window appears.
6. Collect the printed checks from the printer and compare them to the checks displayed in the window.
7. If the numbers assigned by SAP Business One do not match the printed checks, you can change them. Correct the number of the first check and press TAB. The following check numbers are updated accordingly.
Only checks with successive numbers issued by the same account will be updated accordingly. For example, if you change the check number from 999 to 2000, check numbers 1000, 1001, 1002 and so on will be updated to 2001, 2002 and 2003.
If the check numbers are not successive, you must correct each one of them manually.
8. By default, the status of all checks in the window is confirmed. Change the status if necessary.
9. Choose Update or OK.
Result
The numbers assigned to confirmed checks are marked as used.
The Next Check No. field in the House Bank Accounts Setup window is updated.
Check numbers used for overflow printing are marked as voided.
Checks with the Unconfirmed status are marked as printed, but the numbers assigned to them are not marked as used.
hope this helps u.
cheers,
Hema.

AP Check printing setups for printing checks on your own

HI
I am wondering if there a good document which deals with AP check printing with MICR and signature on your own check stock
thanks

Recently we started to deal with AP check printing in our organizatin. It was a daunting task with the information and resources scattered all over and missing critical pieces of information to make sense out of the whole process flow. We attempted to go through the AP check printing internally and succeded.
I decided to post the information for the benefit of people about the our experience
Check Printing Basics and Beyond for Printing Checks on Your Own
by
Sarma Chilukuri
This article deals with what is needed to get your own checks printed. It is a first attempt to uncover all the hidden rules that one should be aware to get your own checks printed. The first section deals with the basic AP check printing setup, while the 2nd half explores some of the flow of events that make it possible to print the check.
Part I â Basic Setup
AP Setup for check printing
There are multiple steps in the AP check printing. First set of steps deal with the AP side setups. The second step is to get the System side setups. The system side setup deals with printer setup and program options setups. The last step would be to make the print format files configured with the vendor provided escape sequences in the laser print format file.
Step 1: login as Payable Manager
Step 2: Bank Setup: Navigate to Setup: Payments > Banks
1.     Make sure the Bank # etc are present
2.     Tab to âBank Accountsâ, and make sure your account # has been setup
3.     On the Bank Accounts screen, tab to the âPayables Documentsâ and verify that Payment format (E.g., COK Laser Format) has been entered. This âPayment format links to next section where we associate it to the right payment program.
Fig 1. AP Payment Bank Setup Screen
Step 3: Program Setup (Setup: Payments > Programs)
As we know there are only 5 formats 3 of which are âEver Green Laserâ (APXPBFE G|L|F) which are explained in the AP Users Guide. For your own form printing, you have to associate the format to APXPFEL (laser format) program. Also, the APXPBFEL or APXPBFEF call the APXPBFEG, which is the base program that pulls the data from oracle base tables. APXPBFEL is the one which allows us to print the checks with MICR and signature on a plain paper not on a pre printed stationery.
Fig. 2 AP Payment Format Setup Screen
Printer Styles, Drivers setup
The above process summarizes the AP Setup. As a DBA, the printer setup needs to be validated. The base install provides the right setup to some extent. But the differences in printers and print queues may add some complexity to the final configuration. The following section discusses the set up the base install provides and changes as needed.
Step 1. Login as system Administrator
Step 2: Style (Install : Printer > Style)
Look for the âPORTRAITHPLJ4LASCHECKâ. This one is associated with the SRW Driver Called, âAPLASPâ (AP Laser printer format).
Step 3: Driver (Install : Printer > Driver).
     1. The âPORTRAITHPLJ4LASCHECKâ is associated with a âUser Driverâ of PORTRAIT for HPLJ4 and and a SRW driver of âAPLASPâ
     2. Also notice that there is an Initialization string at the bottom of it. This initialization string gets called as pre-report trigger for the APXPBFEG program (APXPBFEG.rdf) file. It sets the kind of format it should be. Please see the Appendix A for details on these printer pcl code translations. The Initialization string was as follows:
Initialization: /eE/e&l0o2a7C/e(s0P/e(8U
Step 4: Printer type (Install : Printer > Register)
Each printer type is associated with a set of styles. Make sure the printer that was selected has the above style and its associated driver listed against that.
Fig. 3 System Administrator Printer Seups
Step 5: Program Setup (Concurrent > Program > Define)
This step holds the key for check printing. It is necessary to define whether you need the check on top followed by the Stub or the other way around. The way it is controlled is based on the APXPBFEG.rdf, the report definition file and the APLASP.prt (Printer Style associate with the Portrait laser check format SRW driver). The APLASP.prt file ($FND_TOP/reports) has two identical setups called the 100 series and the 200 series. Those identical sets of setups define where the MICR and signature print on the check. The following table lists the some of the codes in the 100 series. Please refer to Doc ID #146452.1 for complete details.
Fig. 4 System Administrator Concurrent Program Definitions
CODE #     Code Definition
100     Electronic check activation string
101     1st Check #
102     2nd Check #
104     Deactivate check number mode string
111     Activate MICR line
112     MICR Deactivation / reset the printer head position
121     1st Signature
122     2nd Signature
141     Address font activation string
199     Return to default state string
Table 1. APLASP.prt -- MICR Activation Codes
The above code block repeats itself the same way in the 200 series. The decision to activate one way or the other controls the Check printing.
Step 2: Setting up the Option block
In the concurrent program definition for the APXPBFEL, there is an Options block in the middle. You need to list the codes that you want to activate. Please refer to Doc ID # 186640.1 for some explanation on these.
E.g.,
p_printer_code_mask="201,211,221,241" p_sig2_amount="" p_sig3_amount="" p_sig1_vendnum="" p_sig2_vendnum="" p_sig3_vendnum="" p_country_to_ignore="US" p_continuous_stationery="N"
Step 3: Output format is Text
Text format is sufficient, as the printer will pick up these escape sequences anyway.
Fig. 5 System Administrator Concurrent Program APXPBFEL Options Definition
UIPRINT.TXT, UIFONTS.ALI
One needs to be aware of a few more pieces in this puzzle. The UIPRINT.TXT identifies to the Oracle Applications the print queues that were setup. This file is needed to set your PCL / Post Script printer definitions. I did not have to really tinker with these files other than identifying the PCL and Post Script Qâs that were setup on the UNIX box.
Part II: Integrating all the pieces
The above setups are all documented in various articles. We need to understand a few more steps to see how all these pieces come together.
What you need to know about APXPBFEG.rdf
APXPBFEG (.rdf) is the report file which when called pulls the data from Oracle. If you open the APXPBFEG.rdf in the Oracle reports, there is initialization to the report called, SRW.Init. This will bring in the initialization string associated with the PORTRAITHPLJ4LASCHECK driver definition file. Also, please be very careful with this report format file. When you open it, there is small tiny empty block. in the first block which calls the printer initialization code 100/200 under the Format Mask (from APLASP.prt). If this portion gets changed or messed up, one can end up with some unexpected results. Each of those blocks like MICR, CHECK etcâ¦ have associated format triggers and printer codes.
Please make sure that the printer mask is properly handled. I noticed that the 200 series MICR (211) and Signature (221) printer masks were tied to 111 and 121 respectively. These should have been 211 and 221. The other place you need to be careful was the printer code before and after is proper.
For E.g.,
For the MICR, the âprinter code before and after columns â should be 111 and 112 (or 211 / 212) respectively while Format Trigger should reference to 111 (211).
Fig. 6 APXPBFEG rdf file printer mask and Format Triggers
The escape sequences in the APLASP.prt file for these codes will play the crucial role in getting our format around the report output that gets generated from the APXPBFEG program. Please refer to the explanation of these escape sequence codes in the APPENDIX A.
At this point when you run the program, you will see that the formatted output report file will have all the initialization strings and the output associated with that. You can compare the fields and verify the results. Let us closely examine the parts of the 111 and 121 where the micr and signature prints. The key to this to code the escape sequences the right way to get the associate MICR and signature print out correctly.
Fig. 7 APXPBFEG rdf file MICR printer mask and Format Triggers
Code 111 and Code 112 from the APLASP.prt file.
I broke the line into pieces to illustrate the exact escape sequence code.
Code "211"
Part 1: esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
Part 2: esc "(8M" esc "(s0p8.00h8.0v0s0b80T" --- This will be provided by the ROM
Cartridge provider
Part 3: esc "&k15H" esc "*p3215Y" esc "&a13.8C"
code "212"
Part 1 : esc "&f1x3x8X"
Part 2 : esc "&f1S"
Let us go over these 2 sets of codes carefully.
Escape Code     Meaning     Comment
esc "&f0S"      Push Cursor Position
esc "&f0y0X"     Define Macro ID 0 and Start Macro Definition
esc "&l0E"      Define Top Margin at 0 Lines
esc "&a0L"      Define Left Margin at Column 0
esc "(8M"     8M Symbol SetNote : As per pcl codes this happens to be Font Primary JIS Math 8 symbol     MICR Part 1 : Provided by the Vendor from where you the ROM cartridge
esc "(s0p8.00h8.40s0b0T"     {Fixed Pitch}{pitch 8.00 cpi}{Font Style 8.40}{Medium Weight}{Typeface 0}     MICR Part 2 : Provided by the Vendor
esc "&k15H" esc "*p907Y"     Set HMI = 15/120" Vert position = 907 Dots
esc "&a13.8C"     Move to Column 13.8
     CODE 112
esc "&f1x3x8X"     {End Macro Definition}{Call Macro}{Delete Macro ID}
esc "&f1S"     {Pop Cursor Position}     At this point, the MICR gets printed
Table 2. Escape Sequences in APLAP.prt file Explanation
Fig. 8 APXPBFEG rdf file Signature printer mask and Format Triggers
The signature piece (221) has also similar meaning.
Escape Code     Meaning     Comment
esc "&f0S"     Push Cursor Position
esc "*t300R"     300 DPI Graphics resolution
esc "*p1500X"     Horiz position = 1500 Dots
esc "*p650Y"     Vert position = 470 Dots
esc "(4B" esc "(s1p53v0s0b102T"esc "&f0S!"     Symbol SetProportionalPoint Size 53UprightMedium WeightTypeface 102Push Cursor Position!     Vendor gave the us esc "(4B"esc"(s1p53v0s0b102T!"Note: the ! when the it pushes the ! and that is where it prints the signature piece. The first part forms the symbol set , say (4B and the later part forms the signature font and ! is the piece. I took the ! from the above and let it stay with the 3rd part of it so that signature does not print twice.
esc "&f1S"      Pop Cursor Position
esc "*p+121Y"     Move down 121 Dots
esc "&f1S"     Pop Cursor Position
Table 3. Escape Sequences for Signature in APLAP.prt file and Explanation
Summary
One can print their own checks using the above steps. This can work as a cost effective solution for small organizations where the budgetary constraints are tighter. We are successful in getting the AP Checks printed using the above method.
References
Metalink Doc ID # 186640.1, Different Payment Formats â¦
Metalink Doc ID # 60936.1, Step by Step Guide to Setup a Printer in Oracle Applications
Metalink Doc ID # 250543.1, How to Create An Initialization String for a Payable Check Format
Metalink Doc ID # 48680.1, Accounts Payable FAQ â Payment Batch, Check
Metalink Doc ID # 1074792.6, Exclamation Point (!) Prints On Check When Using APXPBFEL And Cartridge
Metalink Doc ID # 158486.1, APXPBFEL Evergreen (Long Laser)
Metalink Doc ID # 146452.1, Listing of p_printer_code_mask Default Values for APXPBFEL
Chapter 2, Oracle Payables user guide
Appendix A
APLASP.prt printer codes explanation
code "200" esc "&l0o2a6d66p8.000c2e1x0l63f1H" esc "&k12.00H" esc "(8U"
esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&a1l0R" control(M) esc"&f3005y4X"
{Portrait}
{Letter}
{6 LPI}
{Define Page Length to 66 Lines}
{Set VMI = 8.000/48"}
{Define Top Margin at 2 Lines}
{Select 1 Copies}
{Disable Perf Skip}
{Define Text Length as 63 Lines}
{Feed from Tray 1 (upper)}
0.1 esc "&k12.00H"
{Set HMI = 12.00/120"}
0.2 esc "(8U"
{Roman-8 Symbol Set}
0.3 esc "(s0p10.00h12.00v0s0b3T"
{Fixed Pitch}
{pitch 10.00 cpi}
{Point Size 12.00}
{Upright}
{Medium Weight}
{Typeface 3}
0.4 esc "&k11.75H"
{Set HMI = 11.75/120"}
0.5 esc "&a1l0R"
{Define Left Margin at Column 1}
{Move to Row 0}
control(M)
0.6 esc"&f3005y4X"
{Define Macro ID 3005}
{Enable Overlay}
code "201" esc "&f0S" esc "&a1.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
{Push Cursor Position} esc "&f0S"
1.1 esc "&a1.25r70C"
{Move to Row 1.25}
{Move to Column 70}
1.2 esc "(8U"
{Roman-8 Symbol Set}
1.3 esc "(s1p14v0s3b4148T"
{Proportional}
{Point Size 14}
{Upright}
{Bold}
{Typeface 4148}
code "202" esc "&f0S" esc "&a20.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
{Push Cursor Position}
2.1 esc "&a20.25r70C"
{Move to Row 20.25}
{Move to Column 70}
2.2 esc "(8U"
{Roman-8 Symbol Set}
2.3 esc "(s1p14v0s3b4148T"
{Proportional}
{Point Size 14}
{Upright}
{Bold}
{Typeface 4148}
code "211" esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
esc "(0Q" esc "(s0p8.00h8.40s0b0T" esc "&k15H" esc "*p907Y" esc "&a13.8C"
{Push Cursor Position}
11.1 esc "&f0y0X"
{Define Macro ID 0}
{Start Macro Definition}
11.2 esc "&l0E"
{Define Top Margin at 0 Lines}
11.3 esc "&a0L"
{Define Left Margin at Column 0}
11.4 esc "(0Q"
{0Q Symbol Set}
11.5 esc "(s0p8.00h8.40s0b0T"
{Fixed Pitch}
{pitch 8.00 cpi}
{Font Style 8.40}
{Medium Weight}
{Typeface 0}
11.6 esc "&k15H" esc "*p907Y"
{Set HMI = 15/120"}
{Vert position = 907 Dots}
11.7 esc "&a13.8C"
{Move to Column 13.8}
code "212" esc "&f1x3x8X" esc "&f1S"
{End Macro Definition}
{Call Macro}
{Delete Macro ID}
12.1 esc "&f1S"
{Pop Cursor Position}
code "221" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p470Y"
esc "(30C" esc "(4B" esc "(s1p53v0s0b102T!"
esc "&f0S!" esc "&f1S" esc "*p+121Y" esc "&f1S"
esc "&f0S"
{Push Cursor Position}
21.1 esc "*t300R"
{300 DPI Graphics resolution}
21.2 esc "*p1500X"
{Horiz position = 1500 Dots}
21.3 esc "*p470Y"
{Vert position = 470 Dots}
21.4 esc "(30C"
{30C Symbol Set}
21.5 esc "(4B"
{4B Symbol Set}
21.6 esc "(s1p53v0s0b102T!"
{Proportional}
{Point Size 53}
{Upright}
{Medium Weight}
{Typeface 102}
21.7 esc "&f0S!"
{Push Cursor Position}
21.8 esc "&f1S"
{Pop Cursor Position}
21.9 esc "*p+141Y"
{Move down 121 Dots}
21.10 esc "&f1S"
{Pop Cursor Position}
code "222" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p650Y"
esc "(30A" esc "(s0p.426h35.25v0s0b128T" esc "&f0S!"
esc "&f1S" esc "*p+141Y" esc "&f1S"
{Push Cursor Position}
22.1 esc "*t300R"
{300 DPI Graphics resolution}
22.2 esc "*p1500X"
{Horiz position = 1500 Dots}
22.3 esc "*p650Y"
{Vert position = 650 Dots}
22.4 esc "(30A
{30A Symbol Set}
22.5 esc "(s0p.426h35.25v0s0b128T"
{Fixed Pitch}
{pitch .426 cpi}
{Point Size 35.25}
{Upright}
{Medium Weight}
{Typeface 128}
22.6 esc "&f0S!"
{Push Cursor Position}
22.7 esc "&f1S"
{Pop Cursor Position}
22.8 esc "*p+141Y"
{Move down 141 Dots}
22.9 esc "&f1S"
{Pop Cursor Position}
code "241" esc "&a-100V" esc "&l5.8C" esc "(8U" esc "(s0p12.00h10.00v0s3b3T" esc "&k11.75H"
41.0 esc "&a-100V"
{Move up 100 Decipoints}
41.1 esc "&l5.8C"
{Set VMI = 5.8/48"}
41.2 esc "(8U"
{Roman-8 Symbol Set}
41.3 esc "(s0p12.00h10.00v0s3b3T"
{Fixed Pitch}
{pitch 12.00 cpi}
{Point Size 10.00}
{Upright}
{Bold}
{Typeface 3}
41.4 esc "&k11.75H"
{Set HMI = 11.75/120"}
code "299" esc "(8U" esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&l6D"
{Roman-8 Symbol Set}
99.1 esc "(s0p10.00h12.00v0s0b3T"
{Fixed Pitch}
{pitch 10.00 cpi}
{Point Size 12.00}
{Upright}
{Medium Weight}
{Typeface 3}
99.2 esc "&k11.75H"
{Set HMI = 11.75/120"}
99.3 esc "&l6D"
{6 LPI}

Check run does not create check register

Hi,
X report that is expected to be generated as a result of the check run being performed is the "Payment Summary" report. Currently, this is not automatically printing. To print same, the command "SP01" must be accessed, subsequent to the check run being performed.
And, also, as before, with the check registers printed from this command, the printing has been on only 1 side of the paper.
In the variant, "print payment summary" is checked and "print immediatly" is also checked.
Can anyone help me in this
thanks

Hi,
Please check if correct SAP configured Printer name is given in the variant.
Regards
Anuradha

Void a printed check run

Similar Messages

Maybe you are looking for