Conf. Wizard - step 4

Hello
I've already configured each platform elements in step 3 but I'm not able to move to step 4 - a message always tells me to
Please click the "Previous Step" button to go back to Step 3 to connect cloud infrastructure.
I've logged out, closed the browser and oppened it again. Tried it with IE 8, Chrome and Firefox 3.6.
Not sure what I still have to do in step 3. The only error messages I see in orchestrator are failures in the process of finding vCenter resources (datastores, portgroups, etc - only finding resource pools works) but the process finishes without errors.
Do I have to wait for something? I see all 4 platform elements in the service items page.
Regards

My mistake. As the user I'm using to configure the portal already comes from AD, I've missed adding that user to the Site Administration group. After doing it, that user was able to start step 4.

Similar Messages

Cisco IAC 3.1 - problems running Conf Wizard

Hi all
Following the configuration guide for Cisco IAC 3.1, I have all steps required for executing the configuration wizard in place but, for some reason, it fails to discover the infrastructure items through the wizard. I could discover and register the infrastructure items through the Manage Cloud Infrastructure portlet.
During the discovery process, I should expect communications between CP and CO, right? I see no new process starting at PO during the discovery process.
Any hints on what might be happening ?
Thanks in advance

Yes. The documentation actually indicates that PowerCli is a requirement. It is installed along with all the other requirements.
I believe this conf wizard issue comes from the SE 3.0.1 release. It was know that one had to log out, close the browser and then log back in so that the next wizard step could be performed. Terrible for a UI experience but hope it will be fixed soon.
Thanks for your support.

Payment Wizard - step 6of 9 - recommendation report PLD has no vendor code

Dear all,
Our customer is on SAP2007A SP00 PL41, US localization, SQL2005, no 3rd party add-on
They are using Payment Wizard. On create new >> step 6 of 9, recommendation report, when they tried to print the report, we cannot see vendor code and vendor name. They are blank. We are using the system PLD.
If we just go through the exsiting recommandation, we can have vendor code and vendor name on the report. This only happened when we create new payment.
I can reproduce this in SAP2007 SP01 PL08, CA localization. Is it a bug or a system behavior? Thanks.
Regards,
Yuka

Hi,
Please check the issue in the Demo database on the Latest patch.
I think the customer is doing the Print Preview when the Payment wizard is being run.
Check for the saved recommended run , whether you can get the Print/print preview or not.
Kind Regards,
Jitin
SAP Business One Forum Team

No synchronous Request/Reply option in B2B config wizard step 5 of 7 ?

I have a customer running SOA Suite 11.1.1.5 who has created a BPEL process
and added a B2B partner link to the reference swim lane.
They want to send a 270 document to a partner and receive a 271 on the same HTTP Channel as a Sync Req/Reply
When the customer runs the B2B wizard, it successfully connects to their WLS Server and at
Step 5 of 7 in the wizard they see radio buttons for
o Send
o Receive
They do not have radio buttons further down for
o Synchronous Request/Response
o Outbound
o Inbound
Does anyone have any ideas why not?
I have a sample running on my local server which is also 11.1.1.5 and
the Synchronous Request/Response radio buttons do appear.
thanks
Bob

Bob,
I don't think PS4 (11.1.1.5) has this option available -
http://docs.oracle.com/cd/E21764_01/integration.1111/e10229/intro_ui.htm#CHDEGEEB
Please re-check your local setup version.
Regards,
Anuj

File Adapter Wizard Step 4

I'd like to write out a message variable to a file. When I use the file adapter, the wizard asks for a schema in step 4. There is no xsd schema defined for the message.
I tried using the "Schema is Opaque" checkbox to create the partnerlink but then I get a type mismatch between the message I want to write out and the opaque "Write_msg" of the adapter.
What should I do to write out a message using the file adapter when there is no xsd? How do I get past step 4 in the wizard? Is there an example somewhere?
Thanks,
Bret

Google's wsdl is available for download to the local file system. It's not available dynamically via an API, at least not that I've been able to find. Perhaps because they require you to sign a license agreement checkbox and access via an API would not satisfy their legal department? I guess we need a new WS* specification: WS-Legal or WS-Licensing.
I did create my partner link just as you described. My local file is called GoogleSearch.wsdl and the partner link wizard creates a file called GoogleSearchRef.wsdl. But there is no xsd created.
Maybe the only workaround is to chop the message definition out of the wsdl file and manually create an xsd. But that would be a severe support workload, since Google's wsdl may change from time to time and a new xsd would then have to be generated. Perhaps the process of generating an xsd from a wsdl could be automated. What do you think?
Message was edited by:
Bret

Payment wizard - Step 4

Hi experts. I need a little explanation about the payment wizard tool step 4 of 9.
When i run the wizard to generate incoming payment, after selectin payment type > incoming and payment means > bill of exchange in step 2 of 9, all bp in step 3 of 9, in step 4 of 9 i can select a duedate range and / or number range.
Well... I suppose that the number range is the number of the invoice..
But if i set the number range from invoice number 10 to invoice number 100, wizard load all invoice..Not only the invoice between the range i set.
So... can you explain me how does the number range work in wizard payment?
Thank in advance.

Hi Gordon.. Thank's for your reply..
Sorry, but i can not understand what you menas for "The system will probably compare them by text value instead of number".
My numeration series setting for the invoice are from 11150000 to 11159999. Now the first free number is 1150308.
I would like to run payment wizard from number 11150300 11150307...
But if i set this range number in step 4 of 9 and i go on on wizard, i've all the open invoice selected.. Not only the invoice between 11150300 and 11150307
Thank's

Wizard Step question

Hi,
I am having a wizard in the pop-up, which on first call starts by default with Step 1 and all other subsequent calls start with Step 2. What do I need to do that it always starts with Step 1 and not Step 2?
The default layer setting of the wizard is set to Step 1.
Best regards,
Dharmi

Hi Shai,
I tried what you mentionen, and I get the following error:
The initial exception that caused the request to fail, was: 
 
<div style="font-size:8pt;color:#FF0000">
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Viewmanager for window Generic is already used and must not be used twice at the same time.
</div>
 
 at com.sap.tc.webdynpro.progmodel.window.ViewManager.allocate(ViewManager.java:97) 
 at com.sap.tc.webdynpro.progmodel.window.InterfaceView.manageEmbeddedViewManager(InterfaceView.java:145) 
 at com.sap.tc.webdynpro.progmodel.window.InterfaceView.initController(InterfaceView.java:56) 
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:209) 
 at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:352) 
 ... 57 more 
 
See <a href="#exceptionchain">full exception chain</a> for details.
 
 
Here by the [Screenshot of action - open window|http://img212.imageshack.us/img212/5756/engineactionnv3.jpg] and [Transition|http://img382.imageshack.us/img382/5361/engineaction1el1.jpg]
Best regards,
Dharmi

4.2.0 version Authoring wizard Step 4 Nullpointer

OHJ4.2.0 version.
Authoring Wizard started. from bin directory
Click to Step 4 of 10.
Add a View.
In the DataLocation, press Browse. now Press Cancel on the FileSelector dialog.
Since the file is Null, it results in nullpointer.
C:\Program Files\ohelp\bin>"C:\Program Files\ohelp\_jvm\bin\java.exe" -classpath
"C:\Program Files\ohelp\help4-wizard.jar;C:\Program Files\ohelp\help4-indexer.j
ar;C:\Program Files\ohelp\help4.jar;C:\Program Files\ohelp\ohj-jewt.jar;C:\Progr
am Files\ohelp\;C:\Program Files\ohelp\oracle_ice5.jar;C:\Program Files\ohelp\wi
zard-ewt.jar" oracle.help.wizard.HelpSetWizard
java.lang.NullPointerException
at java.io.File.<init>(Unknown Source)
at oracle.help.wizard.FilePromptContainer.actionPerformed(Unknown Source
at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
at oracle.ewt.lwAWT.LWButton.processActionEvent(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.button.PushButton.activate(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.proces[i]Long postings are being truncated to ~1 kB at this time.

Thanks for the bug report, I logged it in our bug database.
Jeffrey Stephenson
Oracle Corporation

"System.FormatException: The string was not recognized as a valid DateTime" when running SharePoint Configuration Wizard step 9

Dears,
We have a problem upgrading sharepoint
From: SharePoint 2007 SP2 12.0.0.6535 - April 10 cumulative Update
To: SharePoint 2007 SP2 12.0.6557.5000 - April 11 cumulative Update
We start installing WSS CU in our standalone environment
Then we start running the SharePoint Configuration Wizard and it is failed in step 9 with the following error in "PSCDiagnostics" log:
File reader could not understand line 15679. Line was: 06/26/2011 10:11:35 1 INF Entering function PsconfigLinkLabel.LinkLabelClickedEventHandler. Error was: System.FormatException:
The string was not recognized as a valid DateTime. There is a unknown word starting
at index 24.
at System.DateTimeParse.Parse(String s, DateTimeFormatInfo dtfi, DateTimeStyles styles)
at UlsGump.Column.TimeColumn.ParseTime(StringFacade timeString)
at UlsGump.UlsEntry.SetEntryFromThread(StringFacade[] threadFacades, StringCacheFile stringCacheFile, Int64 messageLocation)
at UlsGump.UlsEntry.ReadFromUlsBuffer(Char[] buffer, Int32 bufferStart, Int32 bufferCount, StringCacheFile stringCacheFile, Int64 fileStart)
at UlsGump.FilePump.ReadJob()
Please help and advise to solve this error in order to get upgrading sharepoint succeed
Regards, Anas N. Alhussein | Sharepoint Senior Developer

Hi,
From your narration, you can clear the configuration cache, then re-run the SharePoint Configuration Wizard, check the effect.
Cleared the cache of config database by following below steps.
1. Stopped the Windows SharePoint Services Timer service.
2. Started on the SharePoint Server where Central Administration Site is hosted. Browse to
C:\Documents and Settings\All Users\Application Data\Microsoft\SharePoint\Config\
3. Deleted all the xml files. (But do not delete the cache.ini file.)
4. Then Edited the cache.ini and replaced the current value with "1".
5. Restarted the Windows SharePoint Services Timer service on the Central Admin server .
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Regards, Rock Wang Microsoft Online Community Support

Blank screen in intrastat wizard step 5 document overview

Hi,
i have a problem at a customer
filled in all item am bp settings for intrastat en see the correct items with commodity codes and bp with correct details in intrastat wizard. But in the step 5 of the wizard where it should show me the purchase documents i get an blank screen and no data is in the lines???
What is wrong
Mark

Bob,
I don't think PS4 (11.1.1.5) has this option available -
http://docs.oracle.com/cd/E21764_01/integration.1111/e10229/intro_ui.htm#CHDEGEEB
Please re-check your local setup version.
Regards,
Anuj

Grid Installer Wizard step 9 of 10 - execute script root.sh problem

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6)
and according to the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
The Virtual Disk for each VM is 20 GB whose raw device is /dev/sda (partition /dev/sda1 is the same size).
In order to install Grid Infrastructure, I add 5 Hard Disks into the first VM rac1 and 10GB for each Hard Disk.
Then create 5 ASM disks respectively as a Disk Group. Let me describe them as follows:
OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
Corresponding raw devices: /dev/sdb (sdc sdd sde sdf)
Corresponding partition: /dev/sdb1 (sdc1 sdd1 sde1 sdf1)
Corresponding ASM disk: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
When I run Grid installer step 5 of 8, I select all of 5 ASMDISK as ASM disk group in the Wizard.
The clusterware files are supposed to be stored in the ASM disk group.
The 2 VMs rac1 and rac2 should use the same ASM disk group.
By here, I don't do anything regarding ASM disk group in the second VM rac2.
When run the Grid Installer step 9 of 10, execute script root.sh in the 2 VMs rac1 and rac2. The script root.sh runs in the first VM rac1 successfully. But when the script root.sh runs in the second VM rac2, the error message comes up as following:
ORA-15018: disk group cannot be created.
ORA-15031: disk specification 'ORCL:ASMDISK5' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK4' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK3' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK2' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK1' matches no disks.
Configuration of ASM failed.
Did not successfully configure and start ASM.
Initial cluster configuration failed.
From the above error message, it seems that we need to connect the second VM rac2 with the ASM disk group created in rac1 so that 2 VMs use the same set of the ASM disks.
But I don't see anything about doing ASM disk group in the second VM rac2 in the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html.
My question is:
Do any folk understand how to solve ASM disks issue in the second VM rac2 when run the script root.sh in rac2 on step 9 of 10 in Installer Wizard ?
Thanks.

Hi,
One of mandatory requirement for RAC is shared storage. Check if you have shared storage across all nodes.
Run oracleasm listdisk on node2 to see if it can see the same disks on node 1. Otherwise you didn't follow that tutorial correctly
Cheers

CIAC 3.1 -- conf wizard won't go further after adding POD

Hi,
I'm on phase where I created a new POD, but after that config wizard won't recognize that there's a POD already and won't go further.
Any ideas why's that ? What it tries to check on that stage ?
Thanks.

Do you receive the success message circled in the screenshot below?
Do you see any entries in the "POD" service item table in Service Item Manager?

JDev 3.2 Deployment wizard failed to show public static methods in step #3.

JDeveloper 3.2 and 3.1 Deployment Wizard ( step #3) does not show any public static methods being deployed as Java stored procedures. The "settings" button is disabled.
Is this a demo version of the tool ?

It's probably easier to add them all and remove the ones you don't want. Admittedly this is a bit cumbersome, because the 3.2 navigator doesn't allow multiple selection..
(one area that's much better in 9i :) )
Brian

How to disable a Next button for a particular step wihtin a ASP Web Wizard

Hi,
I am new to .Net and trying to use ASP wizard on my page. Within the ASP wizard steps I wanted to customise a particular Wizard setp: I have a wizard with follwing steps
Wizard:
Step 1
Step 2
Step 3
Step 4
If user is on step 3, he/she can add details and it should contains two buttons:
1. A standard Button to "Add another record" which will allow users to stay on the same step (step 3) and allow them to add another record
2 Previous button need to be renamed as "Done" once clicked it need to go back to STep 2
I want the Next button to be disabled for wizard step 3 becuase my requirement need to fill the details on step 3 and goback to Step 2 once user clicks "Done"
I tried using <StepNavigationTemplate> in aspx (or) e.cancel = true in code behind but that affects all the steps.
Can anyone suggest if I can customise a particular wizard step to disable the next button to suite my requirement?
Thanks

Hi Avanthiavudari,
Please post ASP.NET questions in
ASP.NET forums. More web developers there will give you professional help there.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Managed system configuration, step:Check Prerequisites

hi firends,
We've updated our SLM system up to SP13 and import finished success.
When we starts managed system conf from menu SOLMAN_SETUP - Managed System Configuration - Configure System - Check Prerequisites, execution return error that system prerequisites are not fullfilled.
But from menu Status all SP's are correct
Additionally screenshot added to attachment
please help me to resolve this problem.
P.S. all other steps in Managed system conf wizard finished Success.
Thanks in advance
Shahin

Hi Matthias,
Please review SAP Note 1571442 as it might be helpful in resolving this error message.

Conf. Wizard - step 4

Similar Messages

Maybe you are looking for