'Configuration data' tab of an equipment

How to remove 'Configuration data' tab of an equipment master after once it is activated.

Thank you Narasimhan Sir,
Actually this was in the context of exploring the 'Configurable Gen Maint Tasklist'. In the absence of proper knowledge nearby on this subject, I have been experimenting different things in Sand Box and Unit Test Servers. So in this context at some point of time I was trying to remove this activated tab and wanted to know whether it can happen or not. When you've said it can not be, we may leave it here.
My one problem o the same subject i.e., 'Configurable Gen. Maint. Task List' has not yet been answered by any of the fora.
That is:
When I create a maintenance order and importing such Task list into it the system is not proposing the characteristic values which are given in the equipment master data (Classification tab page). It is happening only when I create a Configurable material, activate the tab in equipment master and put this material number over there. But this is a big exercise when it is a matter of thousands of equipments.
The essence is 'I do not want to activate the configuration tab of equipment master, but I want the system should pick-up the characterisitic values from the Equipment calss characterisitcs'
I hope you've followed.
Can you help me.
Thanks once again for responding.

Similar Messages

  • PRT data tab on Equipment

    Hi!
    How do I create the PRT data tab on an equipment after it has been created...??
    Cant find a way in IE02..
    // Andreas

    when you create equipment manually trough IE01 there is a option to mention equipment category through which(view selection is based on equipment category) PRT tab gets activated.
    When you create serial no- system creates equipment in the background (may be of different category depends on your configuration).
    Once equipment is created you can also activate other views like PRT data, sales data, config data through menu in IE02
    Edit > view selection> check PRT data/sales data etc.
    Shakti

  • In MM03, can you configure the display layout of the "document data" tab?

    In MM03 on the document data tab, we would like to shorten the length of the "document" column so that the Status field can be viewed on initial screen without scrolling to the right.  Is it possible to reconfigure this view?

    Hi Heidi,
    to change the layout of the linked documents in transaction MM03 please go to the additional data tab and then please use the small configurations button (small table icon on the right side) and follow the below instructions:
    1.  Configure the table control as you want it.
    2. Click the settings button at the top of the table control.
    3. Enter a name and chhose "Create".
    4. If you want this variant to appear whenever the table control appears, set the "Use as default setting" option.
    5. Choose "Copy" to close the dialog box.
    If you want to change how existing variants are used, or want to reactivate the basic setting, choose the corresponding settings from the list boxes and choose 'Copy' to close the dialog box.
    Best regards,
    Christoph
    P.S.: Please reward points for useful information.

  • Ie01 configuration data

    Hi,
    I want to assign equipment to a variant material. but i can't see the  tab page "configuration data" in equipment creation program (ie01-ie02-ie03). Could you help me how I can find?

    i was creating the eqipment by taking a reference equipment and the configuration material tab was coming default. This time the eqipment number was created by somebody else.
    material and serial numbers has already been mentioned
    For the variant, we have assigned equipments before so there is no problem in materials master for the variant. Serial number profile was mentioned before.
    Plant type and storage locations come automatically as we process the eqipment.
    I could not understand the user status? My problem still continues

  • Warranty Date field in the equipment master data

    Hi everyone!
    I wanted to display the warranty date field in the equipment master data (IE01). I have already made the configuration and added the additional tab and screen thru this path:
    Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > General Data > Set View Profile for Technical Objects
    But still, the tab is not added and the warranty date field is not found in the "Define Field Selection for the Equipment Master Record". please help me with this. We need this data because we are not using serial numbering and warranty master data that's why a way to track the warranty date is thru this adjustment in the equipment master data screen.
    Thank you very much.

    Marlon,
      Make sure that you have assigned this specific profile to the Equipment category of the associated equipment that you are creating under SPRO > PM> Master data> tech object > Equipment > Equip category.
    Regards
    Narasimhan

  • Want to remove Technical data Tab from Work Center

    Hi All,
    I want to remove Technical data Tab from Work Center. I have Removed ''Technical data'' Tab from Plant Maintenance and Customer Service-->Master Data in Plant Maintenance and Customer Service -->Maintenance Plans, Work Centers, Task Lists and PRTs >Work Centers>Configure Screen Sequence for Work Center.
    Still I am able to see Technical Data Tab in IR01, Work center.
    Is there any other config to remove the same?

    This is resolved.
    I have changed the config in following node as 0005 for PM
    SPRO / IMG -> Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Maintenance Plans, Work Centers, Task Lists and PRTs -> Work Centers->General Data->Define Work Center Types and Link to Task List Application

  • Addnl data tab missing in cv01n

    Dear SAP Experts,
    We have created a content server 640 with MAX DB and attached to our ECC6.0 system.
    we have created a repository and we could connect through the csadmin to that repositiry.
    Now when we are trying to upload any document from the cv01n. we are not able to find the tab addnl data in cv01n.
    Please help us how to upload the document in cv01n to store in the created repository.
    Thanks
    Ram Kumar.

    Hi Ram,
    As said by other experts, the originals (Attachments) can be uploaded in a DIR using either 'Originals' section or through 'Originals' tab. If these section/tab is not visible, then check the configuration of a document type (tcode-DC10) for suppressed fields((Screenshot attached).
    Document type configuration screenshot:
    And to answer your second question, 'Additional data' tab appears in DIR only if it is configured in the document type(shown in the above screenshot) or if you are manually linking the class to a DIR using classification button(Appear above the document number).
    In configuration, only one class can be linked and if multiple classes are to be linked then manual method can be used.
    Coming to your third question - Storage of your attachment in content repository,
    After uploading your document using 'open original', right-click on the original and choose 'Check-in' to select the 'storage category' created under the content repository.
    Hope this helps.
    Regards,
    Ravi

  • NWA is not opening in PI 7.1 from Configuration & Monitoring tab

    Hi All,
    When i try opening NWA from Configuration & Monitoring tab, it is not giving me proper results as i do from /nwa in generic scenario. I'm getting message as "No data available to the system selector".
    I'm using PI 7.1.
    Do i need to configure anything?

    Prateek,
    As per your information, i have started applying note # 1160261 & while it's application, stuck up for 2nd step-"Note 1226536 - WSIL service gives wrong endpointURL", basically here i would like to know, should i be first doing Template installation step -" Configure NWA for Double Stack System"?
    Please any one of you have applied all the steps in Configuration wizard with respect to NWA & NWAPI, then please help me with any of it's documents.

  • Grouping field value in the additional data tab is saved with capital lette

    Hi,
    Whenever I change the value in the 'Grouping field' in the additional data tab, it gets saved with all letter caps.
    For e.g, if i enter 'Manager'.. it gets saved as 'MANAGER'.
    what could be the reason for this? Is there any configuration for this?
    Regards,
    Simmi

    Hi Simmi,
    For Grouping and Search Field, this seems to be the standard system behaviour in cProjects and as per my knowledge there are no settings for the same.
    Probably you can raise an OSS message regarding the same.
    Regards,
    Vivek Pandey

  • Special stock indicator in the OD (goods movement  data tab)

    Hello SAP Experts,
    I would like to ask on how the special stock type indicator field (LIPS-SOBKZ) in the outbound deliveries, under the goods movement data tab, can be populated? For example, with stock type indicator E.
    Are there any configs or master data settings that allow the population of the stock type in the ODs? I'm just wondering why we have some ODs (replenishment deliveries) that are having the special stock indicator E, but sometimes, this field is empty. I would like to know what are the factors that allow the special stock type indicator field to be populated.
    Thanks in advance!

    On the SD side, the special stock indicator on a delivery line item is copied from the sales order line item.
    And the special stock indicator on the sales order line item is determined from the item category.
    If you are referring to the MM side of things, (and based on your description of the use of the 'replenishment deliveries you might be), then there probably are corresponding configuration on the MM side of things.
    Matthew
    +1 (707) 276-6473

  • Long text for a field in Additional Data tab of DMS

    i have a field in additional data tab called Name , how can a long text be assigned to that field

    Hello Mr. Vijay,
    Classification Configuration master data which we need in Additional Data tab. Presently In our SAP system we have limitation for just 30 character for each characteristic if i correct just confirm me please
    Regards
    Arun kaul

  • Transaction Data Tab

    Dear All,
    When user creates ticket all the user status displayed in ticket under Transaction data tab-->Action Tab.
    But in my case for some user all the configured statuses are not getting displayed.
    What could be the reason? User has got enough authorization too. Is any additional autho is required?
    Regards,
    Nikhil

    Dear Friend,
    I think you are confused, in transaction data tab
    Actions tab-will show the scheduling actions and action which are carried out with the status of their execution.
    Status tab shows all the status values you have configured.
    This tab basically shows the current status of the ticket.
    Please reward points.

  • How to create Customer data TAB in PO -ME23N

    Can anyone tell me how to add 'Customer data' TAB in the PO heade TABSTRIP. I have to add it in the header besides 'Status' TAB.
    I know an enhancement 'MM06E005' which is used for this purpose.
    Thanks
    SMS

    Hi
    see this sample doc and do it accordingly
    by creating a project in CMOD and assigning the Enhancment MM06E005  and writing the code in the respective screen
    How to implement screen exit for a SAP standard transaction
    Introduction
    SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
    To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
    To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
    An append structure in the database table with the new fields.
    A subscreen area into the standard screen – where the programmer can attach his subscreen of his own program with the new fields.
    A function group under which the new subscreen has to be created with the new fields.
    Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen – so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
    Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
    Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
    Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
    Pre-Requisites
    The developer to work on screen exit should have essential knowledge on the following:
    DDIC concepts, including the knowledge of append structure.
    Concept of SAP Enhancements and implementing them using Projects.
    Concept of function exits.
    Knowledge on Module Pool – including subscreens, Tabstrip controls etc.
    Steps
    Guidelines
    So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
    Find out the Required Enhancements
    Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton ‘SAP Applications’. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest – for e.g., Purchasing, Asset Accounting, etc.
    Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
    Utilize the Enhancement in a Project
    After you have found one, do as directed in the documentation. Generally, the steps are as follows:
    Create a project using CMOD including your enhancement.
    Create the append structure with new fields.
    Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
    Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
    Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
    Activate the project.
    Test to ensure that required functionality are met.
    Case Study 1
    Add three new custom fields for Asset master and maintain information for them
    Requirement
    Three fields in the legacy system have to be maintained in Asset master. These fields are:
    Original Asset number – 20 characters
    Location 2 – 15 Characters.
    Model no – 20 characters
    Location 2 should start with ‘L’.
    Pre-Analysis
    Finding out the Enhancement
    As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
    Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
    Studying the Function Exits
    The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
    EXIT_SAPLAIST_002
    Function module Level Documentation
    This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
    Import Parameters
    Understanding
    This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
    EXIT_SAPLAIST_003
    Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
    Understanding
    This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
    Studying the Documentation of the Enhancement
    The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
    Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
    Deciding the Final course of Action
    After making all the investigations, the final course of action was determined.
    SrlNo Step Justification
    A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
    Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
    A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be ‘CUST’ (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
    In the PAI of the subscreen, validation for Location to start with ‘L’ will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_002’, the following code will be written:-
    ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_003’, the following code will be written:-
    E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
    Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done – otherwise, the new custom subscreen will not be displayed in the Asset master screens.
    Development
    Creating a Project to include the enhancement
    Go to transaction CMOD and create a project.
    Enter a description for the project. Then, click on the pushbutton ‘Enhancement Assignments’ in the Application Toolbar.
    Enter the name of the enhancement and Save.
    Go to ‘Components’.
    Creating Custom Include for ANLU
    The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
    Create the include structure with three new fields, as required. Then, save and activate it.
    Develop the subscreen and the program
    Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
    Create it as subscreen.
    Then, go to the Layout of the screen and create three new fields from Database table ANLU.
    Drag the fields in the screen body and place them.
    Then, save and activate the screen and come back to screen flow editor.
    Create the PAI module to add validation for field “Location 2”, as required .
    Activate the whole function group and come out.
    Write code in the Function Exits to synchronize the programs
    Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
    Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
    Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
    Then, activate everything – the whole project and come out.
    Complete the configuration to link the subscreen
    The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
    Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
    Here, the requirement is to create these three custom fields in the tab page ‘General’ of asset master screen ( AS01/AS02/AS03/AS91).
    Determine the Layout
    To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class ‘1000’ and click on folder ‘General Assignment of Layout’.
    Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout ‘SAP’ cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
    Create new tab layout
    Go to transaction AOLA. Copy the tab layout ‘SAP’ to create another layout, say, YSUB.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder ‘Tab page titles’.
    You want to put your custom fields in the tab page “General”. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page “General” are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with “U” padded with the custom subscreen prepared by you.
    Then, save and come out.
    Assign the new Layout to Asset Class
    Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
    Save and come out.
    Test the Exit
    Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them…save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
    Original Source: ittoolbox.com
    Regards
    Anji

  • Authorization Group in CV01n Document Data tab

    Hi SAP Gurus,
    I went on to Configure the Authorization groups at  spro / Document Management / Approval Tab,
    but the same is not appearing in CV01N create document, Basic data tab. Screen......
    can any one explain how to configure this Authorization Group and make use of this Authorization Group
    i tried in PFCG, at object C_DRAW_BGR, also but the authorization groups i have created is not displayed at all.
    what is the Configuration missing and to work with Authorization groups.
    please Advice
    Points Awaiting
    Thanks and Regards
    Kumar

    Dear Punam,
    Thanks for ur reply. i have created the authorization groups in SPRO at the approval Tab,
    and also can see the Field Authorization Group in CV01N basic data Field but
    By pressing F4 or searching i could not find my Auth groups created there,
    Nor i could find them at PFCG, at  C_DRAW_BGR objects, at BEGRU
    where has my created Auth group gone,
    please explain how to work with Auth groups. where and all it has to be assigned and linked.
    How to use Authorization Groups for Digital signatures and restrict users For accessing Documents And Original files specifically.
    Thanks and regards
    Kumar

  • Additional Data tab missing from PO items

    Hi Experts,
    The Additional Data tab for items is missing when I try creating a PO.
    I have compared the screen layout, with the system where it is working fine, and found no difference in the configuration.
    Please suggest, how can I enable the "Additional Data" tab in PO for items.
    With Warm Regards,
    Sayan

    Hi Preeti/ Dev,
    Please refer to the below screen-shot.
    Here you will find the Additional Data tab in the Items section.
    The Additional Data tab in the header section is appearing fin

Maybe you are looking for