Configuration in Integration Builder

Hi!
When I have got configuration of connection XI to MSSQL and RFC connection XI - ERP on XI Development system I have to do this all configuration once again on XI QUA and XI Production system or is any other way to transport this configuration to the other systems?
thx for answere

Hi,
Usually For dev,quality and production system the servers will be different.
So you will have to do UID,Password,And ip address configuartion in your jdbc communication channel for each of the servers.
Rest of the configuration as well as repository objects you can transport.
I feel i got the question wrong.
If it is about 3 different installation for servers yes than also you will have to do configuartion for 3 different server reason dev xi will connect to dev erp
quality XI to quality ERP and same way for production.
Thanks,
Tuhin
Message was edited by:
Tuhin Kumar Oza

Similar Messages

How to do configuration in Integration Builder for Idoc to PI to EDI system?

Hi Experts.
I am working on one interface which is SAP IDOC (DESADV.DELVRY03) >> to>> PI >> to>> EDI system.
I am done with all ESR objects,
Can anyone help me about how to and what configuration required to be done in Integration Builder?
And after configuration how should I test/check my interface?
Please give your suggestions.
Any suggestion will be rewarded.
Thanks in advance.
Regards,
Dipen.

Hi Dipen,
Configuration:
SAP ECC
You have to configure the Output types in NACE and Partner Profile in WE20 properly.
SAP PI
In PI, You have to configure the port in IDX1 and load the meta-data in IDX2.
Testing:
While on saving the Delivery document, IDoc would be triggered and it would be routed to PI based on the port that you have configured in the partner profile.
You can check the status of the IDoc in WE02/WE05. Check the tRFC queue in SM58 whether the IDoc is struck in ECC due to any communication issues.
In PI, you can check whether the IDoc is received or not in the transaction IDX5. If you double-click on the message, it would be routed to the message monitoring.
The status of the message in the receiver side can be checked in the communication channel monitoring.
You can let me know if you need any more info.
Thanks,
Kanda

How to configure the Integration Builder connection Parameters

Hi,
If I leave the integration builder for a while, then I explore objects, the pop up message is:
"Connection to server lost You can log on again once the server is available again Do you want to log on again?"
I input password, some times regain the connection, most time not, then if not, I have to restart integration builder. I would like to know where I can adjust parameters to allow connection kept longer.
Thanks
Liang

Hi, Swarup:
Thanks for your reply.
The reality here is that we could not get solid support from BSAIS team, we came to many situations that we have to search around and tell them how to do the job like this (They are all afraid of Java Stack
I will keep search, if you have detailed information how to and where to configure those parameters, please let me know.
Regards!
Liang

How to configure Integration Builder using an Integration Process?

Dear experts,
I have problems configuring the Integration builder using a Integration process.
Scenario = idoc to PI, integration process transforms idoc to file, file to external system.
My integration process starts with an abstract interface (structure of idoc) and ends with an abstract interface (structure of file). But I just can not configure the integration builder correctly...
I did it as follows:
Sender agreement: comm.component = SAP system; interface = Idoc;
receiver determination: comm.component = SAP system; interface = Idoc; configured receiver = my integration process;
interface determination: comm.component = SAP system; interface = Idoc; receiver = target system comm.component;
Receiver agreement: comm.component = SAP system; receiver = target system comm.component; interface = filestructure of target
This does not work unfortunately. How can I pass the Idoc to my abstract interface? And how can I pass the result of my integration process (abstract interface) to the inbound interface? In the interface determination I can not select my Operation Mapping (but that should not be nessesary as I already created an Integration Process)...
Hope anyone can help.
Thanks and regards
William

Just consider your BPM is receiver, and sender:
Src --> BPM (BPM is Receiver)
==========
Sender Agreement (If it is IDOC or HTTP, then you do not have to create)
Commnunication Channel
Receiver Determination
Interface Determination
BPM --> Target (BPM is sender)
============
Receiver Determination
Interface Determination
Communication Channel
Receiver Agreement
If your BPM interact with other systems, you will have more Receiver Determination and Interface determination, possible Receiver agreement
Hope this clear your doubts
Liang

Re: Business sytem availability in Integration builder

Dear Techies,
Iam trying out one preliminary test scenario to map between two flat files.
I had defined only business system sender at starting phase and after building the mapping scenario I again gone back to the SLD and created the business system receiver. But while iam trying to generate configuration part in Integration Builder Iam unable to find the receiver business system which I had created after mapping scenario.
How to find the business system in configuration of integration builder.
Thanks in Advance.
Regards,
Kiran

Dear Hareen,
Thanks alot for your reply.
After cleaning the cache also iam unable to find the reciver businees system which i had defined in SLD while assigning the business system in integration builder
Thanks in advance.
Regards,
Kiran

XI Debugging tool in the Configuration -Integration Builder

Hello to XI Experts,
I an testing the XI Debugging tool in the Configuration -Integration Builder
Menu Path is : Tool->Test Configuration.
It is simple Idoc to Flat File Mapping and it gets executed .
However when I test it using the Test Configuration I am getting following error below.
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://dellsaperp:8050/sap/xi/simulation?sap-client=100 User: XIDIRUSER
There is no problem with mapping as it is getting executed .I am unable to make the Test Configuration work. Do we need to do any configuration to make this transaction work? Any clue?
Regards,
Prashanta Ghosh

Hi Prashanta -
In TC SICF, make sure the simulation service is activated. Path should be default_host/sap/xi/simulation. If not, right-click on simulation and activate service.
Regards,
Jin

Error while setting up the configuration for XI integration builder

Hi experts,
I am trying to configure the XI integration builder.
I have created an entry in table SPROXSET and created an RFC destination of type G.
After that I am trying to execute the SPROXY, I am getting an error "IFR_HTTP_DEST must not be set in table SPROXSET;"
( IFR_HTTP_DEST is the entry in the table SPROXSET)
Please give me solution to this error....This is very urgent.....
Thanks,
Madhuri.

I am having the same problem:
detail:
I have set the echange parameters
com.sap.aii.server.contextRoot.repository.services=rep
com.sap.aii.server.httpport.repository=50000
com.sap.aii.server.name.repository=xiserver
TA: SLDAPICUST hostname=xiserver
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
returns
im exchange profilealdxi01:50000/rep
=>Check with report SPROX_CHECK_IFR_RESPONSE
givers: Integration Builder data not un
se38 shows a wrong url when debuging
http://xiserver:50000/rep/ifraccess?service=query&type=namespace
any suggesting
sproxy only shows the local entries and not the XI interfaces

Integration Builder: Configuration Integration Directory not start.

Hello,
After we patch PI from sp14 to sp 23 while we starting the Integration Directory, it result in the error "Unable to launch the application"while verifying the application:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://<hostname>:port/dir/directory/aii_ibdir_sbeans.jar.
we have jre 1.6.0_24.
I get this error:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://pint1.dlg.dk:50000/dir/directory/aii_ibdir_sbeans.jar
 at com.sun.deploy.cache.CacheEntry.writeManifest(Unknown Source)
 at com.sun.deploy.cache.CacheEntry.access$2000(Unknown Source)
 at com.sun.deploy.cache.CacheEntry$9.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sun.deploy.cache.CacheEntry.writeFileToDisk(Unknown Source)
 at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
Regards

Hi,
When I start Internet Explorer with this url http://port:50000/rep/start/Main.jsp
I get this massage: on Additional Information
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Timestamp: Mon, 28 Mar 2011 09:20:36 UTC
Message: 'parent.InnerFr' is null or not an object
Line: 61
Char: 15
Code: 0
URI: http://port:50000/rep/start/XI.js
Can it be reason I can not start * Integration Builder: Configuration Integration Directory*. And get this massages:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://port:50000/dir/directory/aii_ibdir_sbeans.jar
Any Help
Regards

Integration Builder configuration.

Dear All,
 I am new to XI as Basis Administrator. I need to configure Integration Builder for developers. All I have access is to SLD http://<hostname>/sld and SAP GUI.
 All I know is I need to install JRE with version > 1.4.* and configure web proxy to access XI server.
 My question is what will developers expect me to configure, and what will developer be doing with integration builder ? (tasks in broad terms)
 Do I need to perfrom any tasks on Visual administrator to make some settings ? what are minimum authorizations should I give to developer ?
 Any reasonable advice will be helpful get start configuring integration builder.
Thanks,
N

Hi,
>>My question is what will developers expect me to configure, and what will developer be doing with integration builder ? (tasks in broad terms)
XI Developers needs Rights for
1 Usually the technical system configuration is carried out by basis or admin team
2 Integration builder - creating all design objects, configuration objects
3. You have to provide access for the developer to monitor in RWB
> Do I need to perfrom any tasks on Visual administrator to make some settings ? what are minimum authorizations should I give to developer ?
check this links of XI Authorizations
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Dialog Users role in XI:
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
Service User Role in XI:
http://help.sap.com/saphelp_nw04/helpdata/en/9f/d12940cbf2195de10000000a1550b0/content.htm
Messaging Component & Role:
http://help.sap.com/saphelp_nw04/helpdata/en/d4/d12940cbf2195de10000000a1550b0/content.htm
regards
Ramesh P

XI Configuration: Integration Builder..Cannot connect to repository

Dear All,
I am facing a strange problem in our XI7 server SP11. When I click on the Tools-->Configuration Wizard in Integration Builder I am getting a error message "Cannot connect to repository "
"com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository"
Please let me know the cause of the error. I have checked the configurations in Exchange Profile and its fine.
Please advice what should be done to correct the error.
Warm regards
Mazdul

Dear Jai,
One of the blog tells about the front end configurations..but this is not applicable in our case as evryone is facing the same issue.
The other blog mentions about the rfc connections and they are working fine.
Can you advice further ??
Mazdul

Could not start Configuration wizard in Integration Builder - Configuration

Hi SDN,
I am New to XI,
I have gone through 4 scenarios of XI in a system where Xi is up and running sucessfully.
Now one of my colleague Installed ECC5 with XI in our local server.
I need to do a File 2 File Scenario, for which I could create Product, component, Technical System and Business System in SLD.
I could Create a Name space, Message types and Interfaces in Integration Builder - Design
But When I open Configuration Wizard, Internal Communication in Integration Builder- configuration, it is giving a exception : java.lang.NullPointerException.
Can any one help me in resolving this.
Thanks in advance,
Regards,
Sai.k.k
Message was edited by:
Konchada Sai Krishna

Hi,
In Exchange profile chack the SLD , http port for Integration Bulder properties.like IR,ID , i hope it will try to check for the SLD info , if it is the first time of XI using , you need to check in Exhcnge profile .
if it is not the first time then refresh the SLD cache..
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
for cache refresh
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla

PI - Integration Builder - configure hostname (link)

Hi,
our integration builder linkname (example design or SLD) shows the wrong hostname.
Where i have to configure the name for this links and for the java webstart application.
Thx,
Gordon

Under Connections:
com.sap.aii.connect.cr.name
com.sap.aii.connect.directory.name
com.sap.aii.connect.integrationserver.name
com.sap.aii.connect.landscape.name
com.sap.aii.connect.repository.name
com.sap.aii.connect.rwb.name
If you alsa changed the http port, you will have to change the corresponding http ports for these connections.
For example:
com.sap.aii.connect.cr.name
com.sap.aii.connect.cr.httpport
Carlos

Force Integration Builder (Design and Configuration) language to be English

Hi Experts!
Does anyone know how to force the Integration Builder (Design and Configuration) language to be English? Since SSO is configured the logon screen do not appear and users can not choose the language they want. The problem is that the default language is German instead of English.
Thanks in advance.
Roger Allué i Vall

Hi,
I've changed these parameters in the ExchangeProfile:
com.sap.aii.directory.serviceuser.language
com.sap.aii.integrationserver.serviceuser.language
com.sap.aii.ib.client.login.languages
com.sap.aii.ib.client.content.languages
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.rwb.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.docu.languages
com.sap.aii.repository.serviceuser.language
Now all they have the value EN. I also restarted the applications (Server --> Services --> Deploy) :
sap.com/com.sap.aii.af.app
sap.com/com.sap.aii.af.cpa.app
However, nothing changed. Maybe I have to restart all the J2EE Engine?
Thanks in advance.
Roger Allué i Vall

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

Dear Friends / Experts,
I had spend many days and explored all Weblog and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
Our Environment - PI 7.0 SP 16
Created a new role in the Integration Builder Design
u2013Add Object Types of any Software Component and Namespace
- Enable usage of Integration Builder roles in Exchange Profile
Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
Assign users to the newly created Integration Builder roles
u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
u2013Assign users to these roles
u2013Assign the Integration Builder roles to the above groups in Web AS Java
u2013Assign unrestricted roles to Super Users
Please help - How to validate whether Data Dependent Authorizations are Activated?
I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
Thanks a lot
Satish

Hello,
so to give you status of our issue.
We were able to export missing business component .
But we also exported some interfaces after that and we had some return code 8, due to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
Also recommending to read that, which is pretty good.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
Thanks all,
S.N

Configuration in Integration Builder

Similar Messages

Maybe you are looking for