XI Debugging tool in the Configuration -Integration Builder

Hello to XI Experts,
I an testing the XI Debugging tool in the Configuration -Integration Builder
Menu Path is : Tool->Test Configuration.
It is simple Idoc to Flat File Mapping and it gets executed .
However when I test it using the Test Configuration I am getting following error below.
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://dellsaperp:8050/sap/xi/simulation?sap-client=100 User: XIDIRUSER
There is no problem with mapping as it is getting executed .I am unable to make the Test Configuration work. Do we need to do any configuration to make this transaction work? Any clue?
Regards,
Prashanta Ghosh

Hi Prashanta -
In TC SICF, make sure the simulation service is activated. Path should be default_host/sap/xi/simulation. If not, right-click on simulation and activate service.
Regards,
Jin

Similar Messages

XI Configuration: Integration Builder..Cannot connect to repository

Dear All,
I am facing a strange problem in our XI7 server SP11. When I click on the Tools-->Configuration Wizard in Integration Builder I am getting a error message "Cannot connect to repository "
"com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository"
Please let me know the cause of the error. I have checked the configurations in Exchange Profile and its fine.
Please advice what should be done to correct the error.
Warm regards
Mazdul

Dear Jai,
One of the blog tells about the front end configurations..but this is not applicable in our case as evryone is facing the same issue.
The other blog mentions about the rfc connections and they are working fine.
Can you advice further ??
Mazdul

How to configure Integration Builder using an Integration Process?

Dear experts,
I have problems configuring the Integration builder using a Integration process.
Scenario = idoc to PI, integration process transforms idoc to file, file to external system.
My integration process starts with an abstract interface (structure of idoc) and ends with an abstract interface (structure of file). But I just can not configure the integration builder correctly...
I did it as follows:
Sender agreement: comm.component = SAP system; interface = Idoc;
receiver determination: comm.component = SAP system; interface = Idoc; configured receiver = my integration process;
interface determination: comm.component = SAP system; interface = Idoc; receiver = target system comm.component;
Receiver agreement: comm.component = SAP system; receiver = target system comm.component; interface = filestructure of target
This does not work unfortunately. How can I pass the Idoc to my abstract interface? And how can I pass the result of my integration process (abstract interface) to the inbound interface? In the interface determination I can not select my Operation Mapping (but that should not be nessesary as I already created an Integration Process)...
Hope anyone can help.
Thanks and regards
William

Just consider your BPM is receiver, and sender:
Src --> BPM (BPM is Receiver)
==========
Sender Agreement (If it is IDOC or HTTP, then you do not have to create)
Commnunication Channel
Receiver Determination
Interface Determination
BPM --> Target (BPM is sender)
============
Receiver Determination
Interface Determination
Communication Channel
Receiver Agreement
If your BPM interact with other systems, you will have more Receiver Determination and Interface determination, possible Receiver agreement
Hope this clear your doubts
Liang

Error while setting up the configuration for XI integration builder

Hi experts,
I am trying to configure the XI integration builder.
I have created an entry in table SPROXSET and created an RFC destination of type G.
After that I am trying to execute the SPROXY, I am getting an error "IFR_HTTP_DEST must not be set in table SPROXSET;"
( IFR_HTTP_DEST is the entry in the table SPROXSET)
Please give me solution to this error....This is very urgent.....
Thanks,
Madhuri.

I am having the same problem:
detail:
I have set the echange parameters
com.sap.aii.server.contextRoot.repository.services=rep
com.sap.aii.server.httpport.repository=50000
com.sap.aii.server.name.repository=xiserver
TA: SLDAPICUST hostname=xiserver
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
returns
im exchange profilealdxi01:50000/rep
=>Check with report SPROX_CHECK_IFR_RESPONSE
givers: Integration Builder data not un
se38 shows a wrong url when debuging
http://xiserver:50000/rep/ifraccess?service=query&type=namespace
any suggesting
sproxy only shows the local entries and not the XI interfaces

Integration Builder configuration.

Dear All,
 I am new to XI as Basis Administrator. I need to configure Integration Builder for developers. All I have access is to SLD http://<hostname>/sld and SAP GUI.
 All I know is I need to install JRE with version > 1.4.* and configure web proxy to access XI server.
 My question is what will developers expect me to configure, and what will developer be doing with integration builder ? (tasks in broad terms)
 Do I need to perfrom any tasks on Visual administrator to make some settings ? what are minimum authorizations should I give to developer ?
 Any reasonable advice will be helpful get start configuring integration builder.
Thanks,
N

Hi,
>>My question is what will developers expect me to configure, and what will developer be doing with integration builder ? (tasks in broad terms)
XI Developers needs Rights for
1 Usually the technical system configuration is carried out by basis or admin team
2 Integration builder - creating all design objects, configuration objects
3. You have to provide access for the developer to monitor in RWB
> Do I need to perfrom any tasks on Visual administrator to make some settings ? what are minimum authorizations should I give to developer ?
check this links of XI Authorizations
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Dialog Users role in XI:
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
Service User Role in XI:
http://help.sap.com/saphelp_nw04/helpdata/en/9f/d12940cbf2195de10000000a1550b0/content.htm
Messaging Component & Role:
http://help.sap.com/saphelp_nw04/helpdata/en/d4/d12940cbf2195de10000000a1550b0/content.htm
regards
Ramesh P

Data not Updated Automatically in SLD to XI Integration Builder

I am trying to create a new software component in the SLD for use with our XI machine. However, when I do this, the component does not appear in the XI Integration Builder.
I have looked at the Automatically Updated Data page of the central SLD, and noticed that our XI J2EE system has not Auto-Updated with the SLD for quite some time, if ever.
Can somebody please give me some pointers how to sheck/configure this? Also, is there a way to update the information between the SLD and the XI system manually?
Kind Regards,
Tony.

I think the problem is the system cannot actually see the SLD for some reason.
If I try to access the SLD using the DNS name, I am unable to do so:
http://dnsname:52300/sld/index.html
However, if I use the IP address direct, I can do so:
http://192.xxx.xxx.xxx:52300/sld/index.html
I notice that when I try to access the SLD from the XI start page, the link is using the http://dnsname:52300/sld/index.html form, which isn't working.
Also, when I try to Import Software Component Versions from the Integration Builder menu, I get the error:
com.sap.aii.ibrep.client.swc.ExtSwcAccessException: Unable to read software component versions from System Landscape Directory "dnsname:52300"
So I'm thinking this may be some kind of DNS error, but I don't know how to resolve it.
Any clues?

ABAP Proxy Error - Integration Builder address not maintained

I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
On configuring the relevant connections, I run SPROXY and get the following error:
Integration Builder address is not maintained in the Exchange profile (Connections)
I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
On running the reports
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_HTTP_COMMUNICATION
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_CONNECTION
My question is:
What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
and SAPSLDAPI_<sys id of XI server>
Should the XI Integration Builder address be maintained in R/3?
If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?

Just recheck the steps with this and come up with doubts then
How do you activate ABAP Proxies?
Regards,
Prateek

Debugging tools in SAP Enterprise portal

Hi All.
I need to find the debugging tools which can be used on the enterprise portal..
I had heard about Log watch tool.. How to use this tool?
Is it software do i need to deploy that dc or how to move further?
What is the best debugging tool for the portal? what are the other options
Thanks
Shravan

Hi,
Log Watch is basically a tool which helps you to analyze the trace or logs generated for running an application. You can use the tool by running the application com.sap.tcepcommon~logWatch , but you must have the administrator role assigned to your user id. There are also three tool which helps while troubleshooting any problem in Portal. They are Navigation Reporter, Navigation Debugger, Diagnostic Tool.
Please have a look into the below URL about the tools and details of debugging in Portal.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6035b020-73e3-2910-5496-82d900355947?quicklink=index&overridelayout=true
Thanks
Shankha

SPORXY Integration Builder data not understood

Hello everybody,
I want to connect a 6.20 System to our XI 7.0 (SP13). The Integration Engine in the 6.20 is maintained correctly (Application System, Destination works), the sldcheck works fine.
I use the table SPROXSET instead of the exchangeprofile. The profile is empty, the SPROXSET has an valid entry (IFR_ADDRESS: http://systemDNSName:57000/rep).
The SPROX_CHECK_HTTP_COMMUNICATION says: HTTP communication functioning
But the test =>Check with report SPROX_CHECK_IFR_RESPONSE and ==>Check with report SPROX_CHECK_IFR_CONNECTION both show the failure: Integration Builder data not understood
Normally I connect 6.40 Systems to the XI, they work without a problem. Is there something special with 6.20 Systems?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 1, 2008 10:04 AM

The Add-On is isntalled.
I found out something else. When I try the Connection Test No.3 - SPROX_CHECK_IFR_RESPONSE (in the SPROXY), the IE opens the following Url:
http://myHost:57000/rep/ifraccess?service=query&type=namespace
and I get a HTTP 404 Error. What is the correct Adress here?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 4, 2008 4:49 PM

Integration Builder under Linux

Hi all,
during preparation for a migration project to Linux were experimenting using the SAP Integration Builder Repository and Directory of a XI 2.0 on a Linux client. We got it start proper but the context menu is not working. So we are not able to use functions like export or activating changes. The right mouse button is working in other programs but not here. We thought it could be a problem of the used Java versions. So far we tried 2 combinations of Java Web Start and Java 2 Runtime Environment:
Java Web Start 1.4.2_04
Java 2 Runtime Environment: version 1.3.1_12 of Sun Microsystems Inc.
Java Web Start 1.0.1_02
Java 2 Runtime Environment: version 1.3.1_12 of Sun Microsystems Inc.
Is anyone out there using the Integration Builder on a Linux client?
Thanks in advance
Andreas Paape

Hi Andreas,
We may be in the future. I will check and get back to you on Monday.
Kind regards
Colin

Configuration Template Builder gives error when selecting domain

Hello,
     I'm trying to use the Configuration Template Builder on Solaris to
create a template. I'm starting the builder like this:
java -client -jar /bea/weblogic81/common/lib/config.jar -target=template
When it asks what domain I want to create a template for, I select one
of my domains, then click on the Next button. After a second or two I
get the following stacktrace in the console. I then get similar errors
later in the process.
java.io.IOException: Unable to resolve input source.
java.lang.NullPointerException
at
com.bea.plateng.domain.jdbc.JDBCAspectHelper.getGenericJDBCDriverInfo(JDBCAspectHelper.java:860)
at
com.bea.plateng.domain.jdbc.JDBCAspectHelper.getGenericJDBCDriverInfo(JDBCAspectHelper.java:385)
at
com.bea.plateng.domain.assignment.JDBCPoolJMSJDBCStoreAssignment.createSourceTree(JDBCPoolJMSJDBCStoreAssignment.java:59)
at
com.bea.plateng.domain.assignment.AssignmentTree.buildModel(AssignmentTree.java:335)
at
com.bea.plateng.domain.assignment.AssignmentTreeDefinition.createAssignment(AssignmentTreeDefinition.java:302)
at
com.bea.plateng.domain.DomainTemplate.getAssignment(DomainTemplate.java:923)
at
com.bea.plateng.domain.event.assignment.JMSServerServerAssignmentListener.getJDBCConnectionPool(JMSServerServerAssignmentListener.java:107)
at
com.bea.plateng.domain.event.assignment.JMSServerServerAssignmentListener.doAssign(JMSServerServerAssignmentListener.java:50)
at
com.bea.plateng.domain.event.assignment.AssignmentTreeListener.vetoableChange(AssignmentTreeListener.java:77)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:188)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:155)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:138)
at
com.bea.plateng.common.comdev.TreeDataModel.setAttribute(TreeDataModel.java:191)
at
com.bea.plateng.domain.assignment.AssignmentTree$SetInitialSelectionVisitor.visitTree(AssignmentTree.java:1020)
at
com.bea.plateng.common.comdev.TreeVisitor.visit(TreeVisitor.java:24)
at
com.bea.plateng.common.comdev.PreOrder.preVisit(PreOrder.java:34)
at
com.bea.plateng.common.comdev.TreeHelper.depthFirstTraversal(TreeHelper.java:42)
at
com.bea.plateng.common.comdev.TreeHelper.depthFirstTraversal(TreeHelper.java:47)
at
com.bea.plateng.common.comdev.GeneralTree.accept(GeneralTree.java:220)
at
com.bea.plateng.domain.assignment.AssignmentTree.buildModel(AssignmentTree.java:359)
at
com.bea.plateng.domain.assignment.AssignmentTreeDefinition.createAssignment(AssignmentTreeDefinition.java:302)
at
com.bea.plateng.domain.DomainTemplate.getAssignment(DomainTemplate.java:923)
at
com.bea.plateng.domain.DomainChecker.syncAssignments(DomainChecker.java:223)
at
com.bea.plateng.domain.TemplateBuilder.buildDomainTemplate(TemplateBuilder.java:1177)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.buildTemplate(TemplateLoaderTask.java:243)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.execute(TemplateLoaderTask.java:160)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.run(TemplateLoaderTask.java:133)
at java.lang.Thread.run(Thread.java:534)

I should point out why this is a problem for me. The config.xml of the
domain I'm tring to make a template for puts relative pathnames for the
location of some of the components. For example, JMS Event Generators
are put in the config.xml with a path of "."
If I run the Config Template Builder from the only directory from which
it works (the directory with the config.jar file, which is common/lib),
then these relative paths will not work. I get the error shown below
when trying to create the template jar:
Preparing...
Compressing Configuration Template Contents...
Configuration Template Creation Failed!
Configuration Template Location: /bea/user_templates/demoServer1.conf.jar
Reason: Unable to locate file: ./WLIJmsEG_ResponseGenerator.jar
Exception:
com.bea.plateng.domain.GenerationException: Unable to locate file:
./WLIJmsEG_ResponseGenerator.jar
     at
com.bea.plateng.domain.TemplateGenerator.generate(TemplateGenerator.java:173)
     at
com.bea.plateng.wizard.domain.gui.tasks.DomainCreationTask$1.run(DomainCreationTask.java:222)
So, I wanted to try and run the Template Builder from the domain's
directory, but then I get the error shown below.
Any help is appreciated.
Steven Ostrowski wrote:
Note: I only get this error when running the Template Builder in a
directory other than the /common/lib directory.
If I run this command in any other directory, I get this error. If I run
the command in the common/lib directory, I do not get the error.
Steven Ostrowski wrote:
Hello,
I'm trying to use the Configuration Template Builder on Solaris to
create a template. I'm starting the builder like this:
java -client -jar /bea/weblogic81/common/lib/config.jar -target=template
When it asks what domain I want to create a template for, I select one
of my domains, then click on the Next button. After a second or two I
get the following stacktrace in the console. I then get similar errors
later in the process.
java.io.IOException: Unable to resolve input source.
java.lang.NullPointerException
at
com.bea.plateng.domain.jdbc.JDBCAspectHelper.getGenericJDBCDriverInfo(JDBCAspectHelper.java:860)
at
com.bea.plateng.domain.jdbc.JDBCAspectHelper.getGenericJDBCDriverInfo(JDBCAspectHelper.java:385)
at
com.bea.plateng.domain.assignment.JDBCPoolJMSJDBCStoreAssignment.createSourceTree(JDBCPoolJMSJDBCStoreAssignment.java:59)
at
com.bea.plateng.domain.assignment.AssignmentTree.buildModel(AssignmentTree.java:335)
at
com.bea.plateng.domain.assignment.AssignmentTreeDefinition.createAssignment(AssignmentTreeDefinition.java:302)
at
com.bea.plateng.domain.DomainTemplate.getAssignment(DomainTemplate.java:923)
at
com.bea.plateng.domain.event.assignment.JMSServerServerAssignmentListener.getJDBCConnectionPool(JMSServerServerAssignmentListener.java:107)
at
com.bea.plateng.domain.event.assignment.JMSServerServerAssignmentListener.doAssign(JMSServerServerAssignmentListener.java:50)
at
com.bea.plateng.domain.event.assignment.AssignmentTreeListener.vetoableChange(AssignmentTreeListener.java:77)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:188)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:155)
at
com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:138)
at
com.bea.plateng.common.comdev.TreeDataModel.setAttribute(TreeDataModel.java:191)
at
com.bea.plateng.domain.assignment.AssignmentTree$SetInitialSelectionVisitor.visitTree(AssignmentTree.java:1020)
at
com.bea.plateng.common.comdev.TreeVisitor.visit(TreeVisitor.java:24)
at
com.bea.plateng.common.comdev.PreOrder.preVisit(PreOrder.java:34)
at
com.bea.plateng.common.comdev.TreeHelper.depthFirstTraversal(TreeHelper.java:42)
at
com.bea.plateng.common.comdev.TreeHelper.depthFirstTraversal(TreeHelper.java:47)
at
com.bea.plateng.common.comdev.GeneralTree.accept(GeneralTree.java:220)
at
com.bea.plateng.domain.assignment.AssignmentTree.buildModel(AssignmentTree.java:359)
at
com.bea.plateng.domain.assignment.AssignmentTreeDefinition.createAssignment(AssignmentTreeDefinition.java:302)
at
com.bea.plateng.domain.DomainTemplate.getAssignment(DomainTemplate.java:923)
at
com.bea.plateng.domain.DomainChecker.syncAssignments(DomainChecker.java:223)
at
com.bea.plateng.domain.TemplateBuilder.buildDomainTemplate(TemplateBuilder.java:1177)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.buildTemplate(TemplateLoaderTask.java:243)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.execute(TemplateLoaderTask.java:160)
at
com.bea.plateng.wizard.domain.tasks.TemplateLoaderTask.run(TemplateLoaderTask.java:133)
at java.lang.Thread.run(Thread.java:534)

How to configure the Integration Builder connection Parameters

Hi,
If I leave the integration builder for a while, then I explore objects, the pop up message is:
"Connection to server lost You can log on again once the server is available again Do you want to log on again?"
I input password, some times regain the connection, most time not, then if not, I have to restart integration builder. I would like to know where I can adjust parameters to allow connection kept longer.
Thanks
Liang

Hi, Swarup:
Thanks for your reply.
The reality here is that we could not get solid support from BSAIS team, we came to many situations that we have to search around and tell them how to do the job like this (They are all afraid of Java Stack
I will keep search, if you have detailed information how to and where to configure those parameters, please let me know.
Regards!
Liang

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

The launching time of integration builder is extremely longer

Dear XI experts
I will tell you our story.
When I execute Demo examples (Chapter 5.1.3 Executing and Testing XI 3.0 Demo Examples Configuration)
We got the error STRING_BAD_REF dump when starting BSP application, I found out the solution : SAP Note Number : 869197
We did upgrade to a 6.40 kernel patch level 48 as mentioned in the SAP note.
After that, whenever I launch (start) the integration builder, it takes for ages.
Between [login screen]
http://static.flickr.com/56/117541396_db88ce7101_o.jpg
And [integration builder launching screen]
http://static.flickr.com/35/117541397_4bc79529e8_o.jpg
Ironically the websites related to Java engine pop up as usual, such as SLD, Java start page and so on. Also after few minutes I can get the integration builder in front of my eyes. However, whenever I try to create objects or call some information from the server it also takes time.
Which part do I need to look at in details?
Thank you for your reading.
I will appreciate your any comment.
Regards,
David

I collect some posts related to my problem ( i think ).
Slow response time
Problems in RWB XI 3.0
XI Running Very Slow
XI Running Very Slow
Performance Tuning
Re: Performance Tuning
Problems after Update to SP13
Problems after Update to SP13
Server Performance Declines
Server Performance Declines
Performance Analysis with Single Message
http://help.sap.com/saphelp_erp2005/helpdata/en/42/e7bb8f7c9d3ee0e10000000a1553f6/content.htm
Problems in RWB XI 3.0
Mapping tool very slow after upgrade to SP15

Problem in accessing integration builder tool of XI

Hi
i am having problem in accessing integration builder tool of XI system , when i enter the user credentials it is getting hanged
can any body please help me with this
thanks and regards
Pendyala

Hi,
check whether your xi server is working fine or is it down. If you are not able to open the integration builder, what is the exact error message you are getting.
How are you trying to open your IB.
Are you able to login to SAPGUI for the XI client.
If so try to provide the tcode sxmb_ifr and check whether you are able to open the IB.
Reward points
Regards,
Nithiyanandam

XI Debugging tool in the Configuration -Integration Builder

Similar Messages

Maybe you are looking for