Configuration of form and prog name for  Invoice(MM)

Hello,
Can someone tell me the output type and configuration area/transaction from where i can change the form and the program name for the invoice(MM)
Thanks,
Shehryar

Hi,
Goto NACE tcode & select "MR" ( Invoice verification ) & press "Output Types"--> select the desired output type say "REKL" & double click on processing routines. Here we can see the Forms & program name's for different medium of output.
Regards,
Krishnamurthy.SC

Similar Messages

  • Define Logical Systems and Template Names for BW Reports

    Hi experts
    I would like to know if someone used the mentioned functionality 'Define Logical Systems and Template Names for BW Reports, I would like to know too IF I create a Z REPORT for example in webdynpro and insert it in this configuration it will work and where it will appear in sourcing cockpit?
    sds.
    Javier

    Hello Muthu,
    BW reports will be shown in SRM Box if the corresponding BW roles for SRM are integrated with SRM roles.
    You might to activate the corresponding datasource of this in SRM.
    And since you have to connect the source system to BW, I think you have to define SRM system as logical system in BW.
    Regards,
    Pavan

  • What is the table name and field name for Street 2, street3 in Vendor mast.

    Hi,
    I have a BDC code for Vendor master. I just need to insert the fields street 2, street3, stree4 and street5 in the code. Can I insert it in the code directly without re-recording? If yes then what would be the table and field names for the fields mentioned above.
    Thanks & Regards,
    Sriram

    Hi Sriram,
       Its a Configuration Setting to bring the Check box ask your SD consultant, else directly insert this try, change your internal table filed here,
      PERFORM bdc_dynpro USING 'SAPMF02K'    '0100'.
      PERFORM: bdc_field USING 'RF02K-BUKRS' indata-bukrs,
               bdc_field USING 'RF02K-EKORG' indata-ekorg,
               bdc_field USING 'RF02K-KTOKK' indata-ktokk,
               bdc_field USING 'USE_ZAV'     'X',------------------------>this part is check box
               bdc_field USING 'BDC_OKCODE'  '/00'.
    for street just try this without re-recording,
    PERFORM bdc_field  USING 'ADDR1_DATA-NAME1'       indata-name1.
      PERFORM bdc_field  USING 'ADDR1_DATA-NAME2'       indata-name2.
      PERFORM bdc_field  USING 'ADDR1_DATA-SORT1'       indata-sortl.
      PERFORM bdc_field  USING 'ADDR1_DATA-STREET'      indata-stras.
      PERFORM bdc_field  USING 'ADDR1_DATA-POST_CODE1'  indata-pstlz.
      PERFORM bdc_field  USING 'ADDR1_DATA-CITY1'       indata-ort01.
      PERFORM bdc_field  USING 'ADDR1_DATA-COUNTRY'     indata-land1.
      PERFORM bdc_field  USING 'ADDR1_DATA-REGION'      V_regio.
      PERFORM bdc_field  USING 'ADDR1_DATA-PO_BOX'      indata-pfach.
      PERFORM bdc_field  USING 'ADDR1_DATA-STR_SUPPL2'  indata-suppl2.
      PERFORM bdc_field  USING 'ADDR1_DATA-TAXJURCODE'  indata-txjcd.

  • Table name for Invoice created with PO ref

    hi,
    I required Table name for Invoice created with PO ref.
    Regards,
    Ali

    HI,
    Check the table RSEG: Document Item: Incoming Invoice
    Look for the fields BELNR and EBELN
    Regards
    KK

  • Table name and field name for accounting and material document in MM

    Hi
    Table name and field name for accounting and material document in MM
    how can we diffreentiate the accounting document in MIGO and MIRO ?

    Hi,
    For Goods reciept documents you can search from the tables  MKPF-Header: Material Document and MSEG-Document Segment: Material,
    and for Invoice documents you can search in  tables   BKPF-Accounting Document Header and BSEG-Accounting Document Segment.
    For differentiating the Accounting documents in MIRO and MIGO based on posting key and document types for GRN -document key is -WE and for MIRO document is -RE.......
    Hope this may help you.....................

  • How to change IP, Hostname and domain name for Oracle Application R12

    Hi,
    I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
    Our production and test server environment is:
    Linux Enterprise AS 2.6.9
    Application module: E-Business Suite Treasury only
    Your advice will be much appreciated.
    Regards,
    Kenneth
    Edited by: 850209 on Apr 7, 2011 5:37 PM

    850209 wrote:
    Hi,
    There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
    Thanks.
    Regard,
    Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
    If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

  • Field  and Table name for purchaser

    I want to know the field and table name for purchaser id and purchaser name.
    Plz help me.

    Dear
    Purchaser name are define in Header level data in Purchase Order EKKO & Purchase ID define as a Purchasing Group
    Purchser Name EKKO-ERNAM
    Purchase I D  EKKO-EKGRP
    Regards
    Aamir

  • Want field and table name for RESERVED coloum in MMBE

    Hi ,
            There is a RESERVED coloum in MMBE and     I want this   * RESERVED* coloum  in  MB52   .
           I got to know that Field related to this  RESERVED coloum is BDMNG coming from table RESB .
           To confirm the field and table I checked the value in BDMNG by putting join on MARA and RESB where MATNR = BAUGR.
            But I got  value in BDMNG is 50 and in MMBE it is .228 for that material.
               Please tell me field and table name for RESERVED coloum. and hoe to join MARA and RESB  to get exact result.
    Thanks and Regards,
    Ranu

    Hi,
    Mara-matnr is not equal to Resb-matnr and it shows no record if i do like this.
    But Mara-matnr is equal to Resb-baugr, and it gives me 1 record .But porblem is that i dint get BDMNG field matching with mmbe RESEVERD coloum.

  • What are the userid,password, and host name for oracle 9i?

    HI Guys.
    I am a research student at the University and the I recently downloaded Oracle 9i for my research. But the problems is also with seting it up. Please could you show me the userid, password, and host name for oracle 9i.
    Thanks in advance for your cooperations.
    Malinga R
    [email protected]

    I believe that starting with 9.2, you have to specify different passwords when you install (can't be the default).
    Justin

  • Whats the fieldname and table name for purchase order delivery date

    hi all,
        whats the fieldname and table name for purchase order delivery date
      thanks and regrads

    EKET-EINDT is the delivery date according to the schedule lines.
    for example the line item has 100 qty.
    it is sent in three schedules (40, 40, 20).
    Then EKET will have 3 records for one PO Line item.
    The final delievry data is the EKET-EINDT for the 3rd schedule line item.
    Regards,
    Ravi

  • Script and program name for MM:OUTWARD CHELLAN

    Hi all ,
    can any one give me the script name and program name  for MM:OUTWARD CHELLAN.
    Regards,
    Arun.j

    Hi
    There are Std Scripts for PO,RFQ,CONTRACT, GRN , GI Note etc in MM
    What is this Outward challan? what is its' equivalent SAP business document?
    Check in The Tcode NACE for the relavent one, for the Output applications like MR,MD,EF,ME etc
    Reward points for useful Answers
    Regards
    Anji

  • How to change the name / IP address and domain name for BOE Server

    Hello,
    We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
    I need your help
    thank you

    If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
    Regards,
    Tim

  • Table names and field names for the PO item details

    Hi,
    I want table names and field name for the below fields.
    I have PO number i want to get below fields for PO.
    <b>Confirmed Ship Date (or actual ship date if already shipped) – PGI Date
    Quantity of Product to be shipped (base unit of measure) Sales Order Qty
    Shipped Quantity of Product (normally zero)
    Shipped From Plant Name</b>
    Excellent reward is compulsary.
    reagrds,
    vijay

    Hi,
    Please find below the some of tables and fields for the PO. But from your query hope you are refering some other PO.
    Table : EKPO
    Fields
    KTMNG - Target Qty
    MENGE - Open Qty
    WEPOS - Goods Receipt
    LEWED - Latest GR date
    Table : EORD
    Fields
    RESWK - Procurement plant
    FRESW - Fixed Issuing plant
    LIFNR - Vendor
    FLIFN - Fixed vendor
    Regards,
    BK

  • Assign Form and Output Program for Purchase Order

    Hi,
    in SPRO, Assign Form and Output Program for Purchase Order I see the following data:
    -  IMG Activity  Assign Form and Output Program for Purchase Order
        -  View Maintenance: Data                                                                               
    -  VV_TNAPR_EF                                                                               
    -  TNAPR                                                                               
    -  007ZNEU2EF
    What is 007ZNEU2EF ? 
    Yours faithfully

    I dont have enough knowledge on this one. However i will try to clarify this
    007 i think its a version
    ZNEU2 its a Process type
    EF Purchase order

  • Table name and field name for requirements.

    Using tcode: MD04 for a material; click on switch to Period Totals
    I do know table name and field name for Plnd ind. reqmts (PBED-PLNMG)
    But I don't know table name and field name for Requirements; it gives the structure tabe
    and name only.  What table name and field name that hold the qty for Requirements column?
    Many thanks in advanced,
    Nghiem

    2 months ago, you asked a very similar question... and Markus gave you a good answer. His 2-months old answer still applies here.
    I recommend that you read it a again at Table name for backorder qty on sales order.
    When you have read his answer, please close both threads.

Maybe you are looking for