Configuration of multimapping scenario without a bpm

Hi all,
I am trying simple multimapping without a bpm for jdbc to jdbc scenario
I have created
a single business service which has one sender interface and two receiver interfaces.
Two communication channels, one for sender jdbc and another for receiver jdbc.
One Sender agreement.
Two receiver aggreement with the same communication channel.
Receiver determination.
Interface determination of enhance type.
Hav i missed anything? I am getting a error while testing the configuration in Interface determination and Mapping step.

Hello
      I suspect there could me an error at Message Interface or Message mapping.
     What is the error syntex you encountered. As a process you have done well with
            1) communication channel
            2) Sender agreement & Two receiver aggreement
    Let me know. What are the action item at Intregatrion scenario.
         It was nice answering your question. Feel free to reach SDN if you have any questions. What are the action item at Intregatrion scenario.
Thanks in advance for your co-operation
Ashok Babu
Enterprise Business process Architect
SAP XI Senior Consultant

Similar Messages

Problem with File RFC File scenario without using BPM

Hi all,
I am trying a File RFC File scenario without using BPM with the help of the following thread:
File - RFC - File without a BPM - Possible from SP 19.
The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getting wierd results i.e., when I observe in SXI_MONITOR, the message is showing as processed successfully, but when I watch the message status in communication channel monitoring, I am getting the following error:
"Attempt to process file failed with com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEV120;TS=Test_Service;AN=MI_Invoice;ANS=urn:sap.com:test;"
I am not able to understand what the problem is. By the way, one more thing, is, I have kept the File processing mode as "Delete" in the sender file adapter. But the file is not getting deleted. I think the reason could be because of the above error.
Can any body help me out in getting my problem resolved?
Thanks,
Adithya K

CPA Cache Refresh from the Adapter Engine To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following
URL: http://<host>:<port>/CPACache/refresh?mode=delta|full
The Monitoring url is like this: http://<host>:<port>/CPACache
Thanks & Regards,
Farooq.

Configuring sync lookup scenario without receiver

Hi experts,
I want to do the following scenario and I'm not sure, if this is possible:
I have a sync SOAP call to SAP PI. The request message is mapped to the response message of the sync call. Inside the message mapping, I'm executing a JDBC Lookup, which retrieves all necessary data and puts it into the response structure.
The response should be posted back to the caller. My difficulties are in configuring such a scenario, because there is no actual receiver.
Is there a way to do this in SAP PI? I can't use sync JDBC receiver channel, due to necessary JOIN statements in SELECT (I would have to use XML SQL and JOINS are not possible with that as far as I know).
Best Regards
Sven

>I can't use sync JDBC receiver channel, due to necessary JOIN statements in SELECT (I would have to use XML SQL and JOINS are not possible with that as far as I know).
It is possible to use SELECT QUERY in the receiver channel. You can do JDBC lookup during sync message mapping.
Example:
<StatementName>
<anyName action=u201D SQL_QUERYu201D>
<access>Place your sql string here</access>
<key>
<placeholder1>value1</placeholder1>
<placeholder2>value2<placeholder2>
</key>
</anyName >
</StatementName>
refer this
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Note: You have to create a separate JDBC reciever comm channel for your jdbc lookup. Hope you know that.

Problem in file to rfc scenario without using BPM concept

hi ,
I have configured the file to rfc scenatio and in that i have created a synchronous message interface .i have even aaded modules to my sender adapter .
I have one sender aggrement , 2 receiver aggrement , 1 interface determination , and 1 receiver determination .
the problem that i am facing is that i am able to perform the operations on r3 side succesfully but i am not getting the response back in xi .
can any one pls help me in getting out of this problem .
with regards
Bhawarlal Choudhary

Hi Amit ,
My scenario is for creating the notification ( in plant maintenance) . every time i transmit a file a new notification nos is generated and even i am able to see it in SAP . in RWB when i check my communication channel i am not getting any response . The synchronous process seems to be working fine according to me do i need to even create a FRC communiation channel for sender as i have not done that .
with regards
Bhawarlal Choudhary

How to send 100 records from an IDOC to File Scenario without using BPM?

Hi All,
I have a requirement that i need to send 100 records from sap to file by using the scenario IDOC to File. Can you suggest how can i achieve this?
Regards,
Ramvilas.

Hi,
Create a H type RFC destination.Tagert host and port give Xi system host and port.Path give the
/sap/xi/adapter_plain?namespace=<NameSpcae>&interface=<Interface> &service=<SenderBusinessSystem>&qos=EO or EOIO.
Go to we21 find xmlhttp port.give the port name and assign RFC.Give the port in we20 your idoc and change to collective.
In Xi export the IDOC and change the occurance to 0-unbounded and import it.
Regards,
Prakasu.M

Multiple IDOC to Multiple IDOC scenario without BPM steps????

Hi
Could you please give me the solution for this ???
I want steps for sending all IDOCs at a time- ---"Multiple IDOC to Multiple IDOC scenario without using BPM".???
thanks
3nadh

Hello,
Refer the below, for certain details!
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi ALE configuration for pushing idocs from SAP to XI
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change XI: IDOC bundling - the "trick" with the occurance change
Regards,
Jilan

Two mappings in one scenario without bpm

Hi,
I am using two different mappings.
Output of one mapping is acting as an input for other mapping i.e source message for second mapping.
Is it possible to do this scenario without using bpm?

hi,
have a look how it works from my weblog:
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
you can use any mapping but you need to
be aware how to input and output structures look like:
https://weblogs.sdn.sap.com/weblogs/images/34500/1_xslt_pierwszy.JPG
BTW
target structure is only checked if you use
graphical mapping
if you use abap or java mappings your target structure
will not be checked (if it's valid) as it is with
graphical mapping
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Choosing Receiver Interface (IDoc or RFC) without using BPM

Hi,
We have a scenario wherein the receiver interface (either IDoc or RFC) must be dynamically determined at runtime based on the source message. I've tried using Multi-Mapping but this did not work since IDoc and RFC interfaces are not on the same Adapter Engine.
How do I configure this scenario without using BPM?
Thanks,
Francis

Hi,
>That was my first solution but it did not work since it seems that conditions only work for determining the Operation Mapping to use for the same Receiver interfaces.
not true - not only Operation Mapping but also receiver agreement
so the receiver's channel
>I was misled into thinking that we could use it to dynamically determine the receiver interface.
but you can do it over there
intrface determination can be used for pseudo receiver determination too
so you can have one interface that either goes to one
channel or the other (within the same receiver)
Regards,
Michal Krawczyk

Async- Sync without using BPM

Hi experts,
could you please suggest if is it possible to implement asyn sync scenario without
using BPM. If answer is yes then how to go about it
My Scenario is : File ->RFC ->File
thanks in advance
francis

Hi-
This thread from Bhavesh is very useful
File - RFC - File without a BPM - Possible from SP 19.

SAP XI Acknowledgements in asynchronous communication without using BPM.

Hello experts,
My scenario is File (Legacy system) -> XI->IDOC & I need to send the acknowledgement back to legacy system. How SAP XI acknowledgements work in asynchronous scenarios without a BPM process. I know it has to do something with ALEAUDIT. It would be great if someone describes how exactly it works?
Regards,
Nidhi

Hi Nidhi,
execute report IDX_ALEREQUEST on your PI system.
- put for sender port the IDX1 port to your SAP system,
- put the client of the SAP system
- put the value of the SAP field "receiver partner number" (look at WE02)
- put the value of the SAP field "receiver partner type"
- put optional partner role
The ALEAUD what the SAP ERP sends back (to be scheduled) will be handled at PI as seperate message. So you can do what ever you want with it, for example route it to an FTP server and map the values as you wish to have them.
Regards,
Udo

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

Correlation issue in JMS adapter - SYNC/ASYNC scenario without BPM

Hi,
I am working on a SYNC/ASYNC scenario with JMS adapter without using BPM. My scenario is SOAP<>PI>JMS. I configured the interface as below:
1. SOAP Sender channel
2. JMS Receiver Channel writing to Queue A.
 Module used: a. RequestOneWayBean
 b. WaitResponseBean
 Correlation Settings:
 a. Set JMS Correlation ID to "XI Message ID"
 b. Store JMS CorrelationID of request (Checked)
 c. Set JMS Property to "JMS Correlation Id"
 d. Value = "XI MEssage ID"
3. JMS Sender channel reading from queue B ( I am exporting the message from queue A and importing into queue B)
 Module used: a. NotifyResponseBean
 Correlation Settings:
 a. Set XI MEssage Id to "GUID"
 b. Set XI Conversation ID to "Stored JMS COrrelationID of Request"
I can see the cid in the message from queue A. But I observed thhat the header format of the message in Queue A is "MQSTR".
ISSUE:
1. While writing the message to queue A, below adapter log details(part b) concerned me:
 a. Message '8747a7c2-2b06-11df-8055-005056a70ed6' successfully processed by channel
 b. Could not create acknowledgements for message '8747a7c2-2b06-11df-8055-005056a70ed6'
I am not sure why I am receiving the message that " could not create acknowledgements"
2. While reading the message from the sender channel,I consistently get the error message as below:
 a. XI message ID corresponding to JMS message with ID 'ID:414d51205341504449442e514d202020c67b954b20005602'
 will be created as a new GUID with value '21bca916-424f-41f6-3347-c71090392b58'
 b. Error while processing message '21bca916-424f-41f6-3347-c71090392b58'; detailed error description:
 com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
 found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
Below are the blogs which I have already gone through:
1. JMS Synchronous Scenario without BPM - Correlation Settings and Transactional JMS Session
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b028f6f6-7da5-2a10-19bd-cf322cf5ae7b
2. Note: 1086303
3. Sync / Async Bridge without BPM
In the note, they mentioned something about header being "MQRFH2". BUt in our case, the header is "MSSTR". Not sure whether it makes any difference.
Please help.
Edited by: GP on Mar 9, 2010 4:24 AM

Hi,
detailed error description:
com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
This error would generally arose when there are multiple messages, got stuck in the outbound queue. Try to stop both the sender and receiver JMS comunication channels and clear both the inbound and outbound queues.
Once all the messages in the queue are cleraed, try posting the message again.
Regards,
Swetha.

Synch-asynch scenario without bpm's?

Synch-asynch scenario without bpmu2019s can any one help me how to configure this scenario without bpms?

hi ferocious,
That is possible with standard functions and standard module beans.
Possiable1:
From pi 7.1 v , sap provided standard functions like RFC and jdbc of the conversion function group.
Possiable2:
sap provided Standard module beans those are RequestResopnceBean and OnewayResponceBean.
thanks,
bhavanisankar.

Message Split -- File to Idoc Scenario - ( Without BPM )

I have multiple records coming to XI in a File and I have to create Multiple Idocs to R/3.
Due to Complexity of mapping I'm splitting Maaping step into 2 message Mappings.
A-->B
B-->C
In the 2nd Mapping step I'm doing message Split meaning for each Source record I'm creating multiple Idocs ( To be precise each record on the source becomes 4 idocs in the Target.
2nd Mapping step is as follows
Source 1..1
Sourcerecord 0.. Unbounded
 field1 0..1
 field2 0..1
 filed3 0..1
Target
Message 1
 Idoc 1.. Unbounded
 Idoc Structure..
Message 2
 Idoc 1.. Unbounded
Message 3
 Idoc 1.. Unbounded
Message 4
 Idoc 1.. Unbounded
So based on some criteria each record of Source will be mapped to 4 Messages ( 1 each under each Message )
Is it possible to do this without BPM?. Iam sending all these Idocs to same R/3 System.
Thanks for any help..RK

Hi,
See the blog
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Basicly we have 2 ways of handling such scenarios:
- we can use a block step and send multiple IDOCs from our BPM
- we can also do a little trick and send multiple IDOCs from the XI without a BPM
The first approach is a standard XI approach. It involves the use of a BPM
so the speed of this transfer many not be very good in case you'd like to send
hundreds or thousands of IDOCs in just one call.
The second approach uses a little trick that was mentioned several times
on the XI Froum by a number of XI developers but is still not very clear to the XI newbies.
It allows us to send multiple IDOCs without the use of a BPM. Most probably this will be your choice
if you'd like to use such 1:N (IDOCs) scenarios effectively.
Please see the bwlow threads also..
IDOC Splitting
File To IDOC Thru XI
Multi-Mappings in BPM (XI 3.0)
Please let me know , your prob..is solcev or not..
Regards
Chilla..

SOAP to IDoc scenario without BPM

Hi,
I have 2 scenario's
1) IDoc-SOAP - -response -- IDoc scenario -- (have found some links to do it without BPM)
2) SOAP -- RFC request -- RFC response -- e-mail (no links found)
how can i achive both these scenario's without BPM. Currently i have these 2 scenarios in our 7.1 version with BPM. but our requirement is to migrate this scenario into 7.4 without BPM(No PO).
please help us to achive this scenario without BPM.
Your help is highly appreciated.
thanks,
Praveen

Hi Kiran,
Could you please let us know the exact requirement. How do you want to send the response back to IDOC?
ASync - Sync Bridge with IDOC sender is not possible in PI 7.0.
If It is something like IDOC --> SOAP --> IDOC , And If the SOAP request is small then you can use SOAP Lookup in IDOC to IDOC Scenario.
In The mapping You can do a lookup and get the response from SOAP(Webservice) and map that to your Target IDOC.
This is one possible way for you without BPM in PI7.0.
Please let me know if you need more details about this.
Thanks
Jyothi A

Configuration of multimapping scenario without a bpm

Similar Messages

Maybe you are looking for