Configuration of standard smartforms

How to configure output type for an smartform with its print program , what is the form rountine to be defined in the ouput type.
Guidelines Please.
Thank u .
karthik s.

The most obvious problem from your posted details is:
left DNS blank.
You can't do this. You HAVE to have working DNS somewhere.
For the initial setup this could be a DNS server managed by your ISP. If you're configuring internal DNS then it could be your internal DNS server (or even 127.0.0.1), but not until that server is up and running.
I used the MAC address for the machine in the Basestation to route to this mac address and reserve .2
I don't understand this statement. MAC addresses don't (or, at least, shouldn't) come into the picture at all.
System prefs> Network settings- DNS I've tried with 192.168.0.1, I've tried with 127.0.0.1 and with 127.0.0.1, 192.168.0.1
nothing works. I've even tried with 192.168.0.2
192.168.0.1 won't work - that is your base station and your base station is not a DNS server.
127.0.0.1 won't work until you configure and start up the DNS server in Mac OS X Server.
192.168.0.2 won't work either - for the same reason as 127.0.0.1. It will work once you configure the DNS server on this machine.
So it sounds to me like your first order of business is to setup the DNS server. During the installation process you were asked which services to run. Make sure you enabled DNS then use Server Admin to configure your DNS zone.

Similar Messages

How to configure a standard SmartForm to be sent by e-mail in PDF format

How to configure a standard SmartForm to be sent by e-mail in PDF format
We need to use standard SAP configuration to send e-mails (output type Medium = 5 External Send).
Currently we were able to send the forms on OTF format, not PDF.
Does anyone know how to automatically make the conversion from OTC to PDF without having to code anything on ABAP?

Hello Luiz,
actually there are only a few steps to do:
Just call transaction SCOT and doubleclick your SMTP node. Click on the "set"-Button behind the supported address type "internet". Choose "PDF" as output format for SAPforms.
By the way. You can also generate a PDF-File from a Spool with report RSTXPDFT4.
I hope this will help you.
Bye
Frank

To replace standard smartform by a custom form, to be used in PRINT PREVIEW

Hi,
I have a requirement in CRM 2007 webUI. If we try to create a sales order, then we have a toolbar option button with title "PRINT PREVIEW". It uses the custom smart form "CRM_ORDER_CONFIRMATION_01.
I have to replace this standard form by a Z custom form. This form has soem additional data required for business needs.
Field technical details of the button is :
1. Component Name- BT115H_SLSO
2. View - SOHOverview
3. Context Node - THTMLB
4. Attribute- BUTTON_8
5. Role key - BP_POW_USR
6. Comp. Usage - CUBT Sales Order
7. Object Type - BT115_SLSO
Please reply as soon as possible.

To figure this out you need to do the following:
First determine the action profile for the transaction in question in the IMG.
CRM->Transactions->Basic Settings->Define Transaction Types
Display the detials of the transaction and you will see the action profile. Next copy that action profile by using transaction SPPFCADM. Then in the action defintion for the print action, replace the standard smartform definition with your z-form.
Finally go back into the transaction definition and assign the z-profile to your transaction type. Please note you should only do this with "z-transactions".
I'm not going to go into further detail as this is basic CRM configuration and is valid for all releases. Please look at the best practices guides, or do a search in the CRM General and Framework forum for further information on how to do the configuration steps.
Take care,
Stephen

How to modify a standard smartform

steps to modify a standard smartform.How can i find the standard smartforms.

Hi,
We need to copy the Standard smart form and its' driver program in 'Z' types repectively.
But inorder to trigger our Zmsartform for a given applicaiton or Tcode then we need to configure it in the NACE.
Thanks & Regards,
Chandralekha.

Standard SMARTFORMS - SAP ECC 6.0

Hi All,
We are implementing SAP ECC 6.0 version.
We would like to use the standard smartforms provided by SAP. But I am unable to find most of the smartforms (thro' Tcode: SMARTFORMS, F4 help).
Do we have to run some patches to import standard SAP smartforms? Please provide your inputs. Thanks.
Regards,
Sathyajith ([email protected])

Hi,
Please check this link for preconfigured smartforms.
http://service.sap.com/installations
In menu choose "Entry by Application Group" -> "SAP Best Practices" -> "Best Practices for mySAP All-in-One" -> "PRECONFIGURED SMART FORMS"
Also you can ask BASIS team to down load pre-configured smartforms and then copy the standard to yours. This link may help you.
http://help.sap.com/bestpractices/industry/wholesale/v146c/Wholesale_US/html/PreconfSmartForms.htm
Regards,
Ferry Lianto

Customizing standard smartforms

Hi...
How to customize standard smartforms...?
for ex..
for invoice, the smartform is.. LB_BIL_INVOICE and the print program is RLB_INVOICE ...in abap editor i opended this.....
how to see the output..how to customize it...
plz guide me..

Hai,
You have to copy these standard objects to Z* objects and you should modify them.
Example: Copy LB_BIL_INVOICE to ZLB_BIL_INVOICE and change as of requirement.
To see the output:
tcode: VF03
Type your Invoice number
Choose Billing document->Issue Output To->Screen.
Output Type: RD00.
Execute.
Note: For this your invoice number should be customized with this output type.
Configuring output type to your invoice number.
Goto VF02.
Type your invoice number and Enter
Choose Goto -> Header -> Output
Give RD00 in Output type, Print output in Medium, En in Language and press Enter
Give your printer name in Logical destinition and Your Smartform name in Form.
Back
Save
If you want to create a new Output type for your Smartform.
Go to NACE tcode.
Choose V3 Billing and click on Output Types button
Go to Change Mode
Click on New entries
and create your Output type.
To give parameters for this you can check output type RD00.

Standard Smartform for label printing for packages - pls advice

Hi All,
I need help in changing a print program ie Standard Smartform for label printing for packages ?
Standard Driver program: SDPACKDR
Please provide me with the detailed steps for editing the Std Smartform according to any requirement.
Points will be rewarded promptly.
Thanks.

hi,
1. The smartform name is SD_PACK_ETIK.
2.Just copy the standard program into Zprogram and make chanes and assign in NACE with the form.
3.But,in smartform lable printing is not possible.
4.you can print barcodes.
Regards,
Kumar(Reward if helpful).

Standard Smartform printing purchase requisition through - ME51N / ME52N

Hi Experts,
we are trying to build functionality to print Purchase requisition through transaction ME51N / ME52N / ME53N. we have created a print button on Customer data screen for that. Now we are looking for any standard smartform or script which can be used for printing Purchase requisition.
Please provide me some pointers for the same.
There is print button avalable at item level of purchase requisition. but it will not print header records. i am not able to find this form in system also. how can i find this form?
thanks

>
rajpal sehrawat wrote:
> Hi,
>
>
> Header records means we might provide some header level information like PR number , short text and logo. Currently we are able to print only line items present in the ALV grid.
>
>
> we are looking for some similar form which can be enhanced.
>
>
> thanks
actually the PR number is a line item field - it comes out of table EBAN. You would have to store the logo someplace else, since it does not belong to the PR (EBAN) -> neither header nor item, but is 'simply' graphics stored elsewhere in the database.
I wouldn't know of any form in MM-PUR which you could easily adapt to printing PRs (and have never before heard of the need to print them) - so you will have to do a custom abap. Since there is no possibility to maintain NACE for PRs (it's simply not available) - I wouldn't know where you could use a smartform/sapscript ... that custom abap is all you can do ...

How to find out the standard smartforms?

how to find out the standard smartforms?

Hi Sunil
You just go to transaction SE80(Object Navigator)
and in that enter Package BC470
which contains the standard Programs on Smart forms ,
I think there you can find some Smart forms in those programs.
I hope it will help you.
If it helps reward with points.
Regards Rk

Do we have vendor bank details in MEDRUCK or any standard smartform

HI,
Do we have Vendor bank details getting printed on standard script(Medruck) and any other standard smartforms.
how can we test Purchase Order output.
Regards,
Nagaraju

Hi,
In FBZP, while defining the payment method for the country, you have an option - Required master record specification. In this you need to select Bank details. This will make sure that when you assign this payment method in the vendor master, it validates if the bank details in the masters are maintained and also include it in the payment data set.
Please check and confirm.
Thanks and Regards,
Anit

To find name for standard smartform of purchase order in Tcode me21n.......

Please do not offer rewards
Hi Abapers,
 I had doubt, regarding how to find the name of standard smartform available for purchase order in tcode - ME21N.
 After executing ME21N, n print preview i get a form without logo. So i want to customize the form according to my clients requirement.For this i want to know the Smartform name, so tat i can copy to 'Z.....' and make the customization.
 Can anybody assist me overcome this problem of how to find out the name of smartform without knwing functionmodule name also....
 <<Text removed>>
Advanced Thanks..............
Edited by: Matt on Mar 25, 2009 10:26 AM

DESIGN ONE SMARTFORM AS PERUR NEED.
DRIVER PROGRAM FOR THISIS
*& ZSAPFM06P
&---- Print of a PO by SMART FORMS *
*& Purchase order printing program
&---- FORM ENTRY
SmartForm from customizing table TNAPR
determine smartform function module for invoice
 variant = ' '
 direct_call = ' '
control-no_open = 'X'.
control-no_close = 'X'.
call smartform invoice
 archive_index = toa_dara
 archive_parameters = arc_params
 mail_appl_obj =
 mail_recipient = ls_recipient
 mail_sender = ls_sender
 output_options = ls_composer_param
 is_bil_invoice = ls_bil_invoice
 is_repeat = repeat
 importing job_output_info = ls_job_info
 document_output_info =
 job_output_options =
error handling
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
analyse internal error table of Smart Forms
add your handling
REPORT ZSAPFM06P.
TABLES: TNAPR,
 nast.
DATA: lf_fm_name TYPE rs38l_fnam,
 lf_formname TYPE tdsfname,
 control type ssfctrlop,
 errtab type tsferror.
FORM entry_neu using ent_retco ent_screen.
lf_formname = tnapr-sform.
 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING formname = lf_formname
 IMPORTING fm_name = lf_fm_name
 EXCEPTIONS no_form = 1
 no_function_module = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
control-no_dialog = 'X'.
control-preview = 'X'.
control-langu = sy-langu.
 CALL FUNCTION lf_fm_name
 EXPORTING
 control_parameters = control
 user_settings = 'X'
 is_nast = nast
 EXCEPTIONS formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
if sy-subrc <> 0.
 ent_retco = 0.
else.
 ent_retco = 0.
endif.
call function 'SSF_READ_ERRORS'
 importing
 errortab = errtab.
if not errtab is initial.
endif.
ENDFORM.
DEFINE UR PROGRAM NAME AND SMARTFORM NAME IN NACE.

Standard SMARTFORM for Check Printing/ Payment Advice

Hi All,
I have one important question...
Standard Script Check Print Program = RFFOUS_C
Standart Script Layout Name = F110_PRENUM_CHCK
& F110_D_AVIS
We have to modify it as per client requirment.
But I want to know the Standard SMARTFORM & Standard Smartform driver Program for CHECH printing & payment advice ?????????????
Is there no Smartform for check printing or if exist then please guide me?????????????????

hi umesh,
1)anyone can help me,while extending idoc,i added one segment to idoc by extending debmas.that segment has two fields.while populating data to idoc,i am getting problem like VSV0001.exit is not allowing me to write the code.
plz anyone can help me on this issue.if you did't understand this problem plz tell me how to extend the idoc.more concentration on while populating the data in to idoc.like which function module i have to use.in customer master idoc.debmas.i am new to this environment.plz help me.like complet work till completion of task.
2)and my next assignment is in smartforms.plz let me know .i was created the screen.according to that screen.i have to make print program.plz tell me how to give the text elements.
like we have given in scripts, page window and then F9 to give the text elements.and make the program.like that any one can tell me clearly.how to make the complete smartforms programs.
plz this requirement is very very urgent,plz could you send it for my [email protected]
advance thanks for your help.
thansk&regards,
radhiks.

I need the names of standard smartform for FI module.

i need the names of standard smartform for FI module or if possible if one can provide the smart form for FI - CML & FI - CFM module (new module introduced).

Hi,
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Regards,
Bhaskar

Change in standard smartform

hi all,
i want to change display the long text instead of the short text in a standard-smartform.is it possible?
is there any other way to attend to it?
regards,
johnson

hi,
use the function module READ_TEXT.
then u can display the long text.
reward me if helpful.
gupta

Copy of standard smartform

hi,
how to copy a standard smartform.

Hi,
Go to NACE transaction select Application Catogery for which you want to copy either from Billing or PO -> Select the Output type Button>Select the output type u want to copy and click on Processing Routines Folder .
Copy the smat form Name Go to smart form and copy to zform .
regards,
karthik

Configuration of standard smartforms

Similar Messages

Maybe you are looking for