Configuration Solution Manager - Travel Management for Route Cause Analisys
Hi,
Can you describe how to configure Solution Manager to monitor (RCA-E2E) our Travel System (SAP Enterprise Portal + SAP HR)?
Best regards,
Diego.
Hi,
RCA configuration remain same for all the module/component
All the steps are there in RCA Configuration thread
SPRO>SAP SOlutionManager Implementation Guide> SAP Solution Manager>Basic settings> Root Cause analysis
here you can find all the information regarding setup, please follow one after the other.
Regards,
Shyam.
Similar Messages
-
Business content for Investment Management & Travel management
Hi All,
I am trying to install Business content for Investment Management & Travel management, I found the content in 3.x flow with Infosource. once I raised with SAP they also reply with 3.5 flow. I am doubt full to build with 3.5 flow because 3.5 flow SAP support date over on 31.03.2013. SO how they will support. Please put some light if some one have any idea.
Cheers
AnilHello Anil,
this community deals with the SAP product 'SAP Landscape Transformation'. Can you pls. indicate in which SAP component you have the issue? I guess that the current community might not be the right one.
Best, Heike -
How to Configure Solution Manager 3.2 for Support Desk
Please give me information for configure solution manager 3.2 for support desk. What r the steps to configure ?.
satinder lambaHi,
Check these
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
/people/kamran.ellahi2/blog/2006/01/13/setting-up-sap-service-desk-123-and-go
https://websmp201.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
This will allow you to succeed in configuring your Service Desk.
Feel free to revert back.
--Ragu -
Configure Solution Manager for MS Word 2002
Hi experts,
I am currently facing a problem when I want to create a business blueprint from the SOLAR01.
The MS Word document for the blueprint is created fine, but when I try to execute the macro it stops with error "library not found".
The reason is that "Microsoft Excel 12.0 Object Library" is not present on my PC. That is because I am using MS Office 2002 (where only version 10.0 of this library exist).
As far as I know the 12.0 Object library is part of MS Office 2007. I therefore presume that the Solution Manager is configured to create word documents for office 2007. So is there any possibility to configure it for office 2002?
Thanks a lot for all answers.
Best regards,
TorbenHi,
what is your solman system version?
please refer this [Note 1442338 - Business Blueprint Document: collection of fixes|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1442338]
jansi -
Solution Manager System Monitoring for non SAP system
Dear Support,
I have configured the CCMS Agent (SAPCCMSR) for non-SAP system (Windows 2008R2).
The system information (e.g. CPU, Memory, Disks etc) has already showed in RZ20 of Central Monitoring system (e.g. Solution Manager).
How can I do to configure to display these information in the Alert Inbox tab on System Monitoring Workcenter?
Best regards,
Fan HungHi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way? -
Configuring Solution Manager: Alternative Role to SAP_ALL
This is a general question regarding configuring Solution Manager and note 834534. I am configuring Solution Manager 7.0 at a client site. The main components that I am configuring are on the Monitoring and Operations side; for example, System Monitoring, Service Desk, Issue Management, and Change Management for Maintenance Optimizer. CHaRM will follow later on. Additionally, the client would like to use the project side of Solution Manager.
When I took training for Solution Manager from SAP, the SAP instructor advised the class to have SAP_ALL when configuring Solution Manager The problem I am having is that the client will not issue me SAP_ALL in the Solution Manager instance, regardless of the recommendation in note 834534. I can understand the client's reluctance to issue SAP_ALL, even though Solution Manager is not a financial system in of itself, however, I have found that I am constantly having to ask for authorizations as I step through the wizards and the Scenario-specific settings. When I run into issues which require further investigation by running transactions to check certain settings that are not specifically tiedd to a wizard or scenario-specific setting transaction, I run into further delays as I ask for additional authorizations to troubleshoot issues.
We have implemented the roles and assigned them to my ID in Solution Manager as outlined by the SAP Solution Manager Security Guide to the fullest extent possible; and I have been issued "Basis Roles" that the client issues to their Basis team. Regardless of these actions, I still run into authorization issues.
My question is, apart from the SAP Solution Manager Security Guides recommendations (which does not mention SAP_ALL), is there a role being developed, or has been developed that can be assigned to the Solution Manager configurator in lieu of SAP_ALL (as per note 834534)? I would think that this issue has been raised before, particularly since many companies have implemented SOX controls and are skittish about issuing SAP_ALL.
Your feedback is most appreciated.Thanks for the reply, Nesimi.
While I appreciate that you do not use SAP_ALL, is that the case when you are configuring a brand new, clean system? Are you using the Configuration Wizards with out SAP_ALL? I ask this because when I ran the first configuration wizard, one of the steps is to create a "configuration user", which creates a user with SAP_ALL. However, I cannot use that wizard generated user ID because it has the role SAP_ALL.
In general, I am operating on 3 sources of information that says I need SAP_ALL to configure the system (not necessarily to operate it):
1. An SAP Instructor for the Solution Manager Operations and Monitoring Class
2. The IMG Activity "Create Configuration User" documenation in SPRO
3. Note 834534
I will review the english version of the link http://help.sap.com/saphelp_smehp1/helpdata/de/40/8ac473d40943ddb23def12bdb33437/frameset.htm that you have thoughtfully provided.
With respect to note 123640, I am not sure if that solves my problem or answers the fundemental question that I have in that given the 3 sources I quoted above. It seems to me that SAP's approach in indicating clearly that they prefer that the configuration user should have SAP_ALL is flawed given today's corporate governence policies. Clearly this recommendation is only for the initial configuration, and SAP_ALL can be taken away and replaced by the roles and recommendations in the SolMan security guide; to maintain Solution Manager. But when it comes down to the question "what do you need to configure Solution Manager, because we won't give you SAP_ALL", I am hard pressed to give an answer despite literally spending hundreds of hours researching "documenation" which does not give clear cut answers. I think SAP needs to address this issue instead of taking the easy way out and saying you need "SAP_ALL" as illustrated in the 3 sources of readily available information cited above. -
Travel Management Employee Grouping for Domestic Travel per diems
Dear All,
I have a scenario in Travel management
Scenario
Client has Domestic Travel, only in India under India they have Class A cities, Class B Cities and Class C, For Class A different Per diems rate with respect to the Employees Grade Eg i have created the EG for Travel Expense type like 1 Manager 2 for Senior MGR and so on For Manager for Class A cities will have different Per diems Class B Cities will have Diff Per diems and so on
I have Created Z1 as the Trip Country
under Z1 ClassA
Z1 Class B
Z1 Class C like this and under Define Accomodation per diems for my trip provison variant under that for my trip country z1 and trip region Class A for employee grade wise i have given the Max amount and finally this trip country Z1 i have assigned it to the Domestic Schema but i cannot assign the Trip region there since i have Class Aand B and C My question is will it work for all my Class A and B and C cites too when i am doing PR05 system shlould restrict if any employee is claiming more than his eligliblity Please let me Know wheather my setting is enough for this or not if not let me know the best solution
Regards,
Raghu Kumar RHi Raghu Kumar,
First of all, if you have set warning message then system will not stop you and will give only warning message...
if you want to stop up to the max limit then you have to set the option Error message for exceeding maximum rate instead of warning message.
Secondly if even system is not giving you any warning message then check you influence control parameters (V_T702N_I)... (check it in detail)
Then again check your V_T706B2...
Also check the entries in travel expense sheet pr05, trip country and region shall also be entered in travel expense sheet...
Please let me if you still have problem...
Regards,
Muhammad Umer -
How to configure Solution manager 7.0
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi All Gurus,
I need your help...
Our customer is having ECC 6.0 with Oracle 10g and solution manager 7.0 installed but not configured. Now I need to install patches in ECC 6.0 Server which need to be approved through Solution manager.
I have a task to configure Solution Manager 7.0 in their Landscape, but not sure about the steps to be followed in what sequence.
This is first I am going to configure solution manager 7.0, i need your help for this if you can define steps to be followed.
I got the installation and configuration guide, but I feel its not clear about the actual steps and their sequence.
If some one has his own guide please provide me if possible at [email protected]
Thanks in advance
Regards
Vinay Paul
Edited by: Vinay Paul on Jul 23, 2008 9:06 AMHi Anil,
Thanks for prompt response
I have ready downloaded the guide (solman_40_sr4_win_ora.pdf) but
I can't find the sequence of steps and moreover its not very much clear to me.
If you have any idea about the configuration part can you help me out...
Regards
Vinay Paul -
404 Resource Not Found In UWL for Display Request in Travel Management
Hi Team,
Issue regarding Uwl in Travel Management.In Mss inbox when approver clicks on display form for travel request its throwing error like 404 resource not found.
i have check all uwl iview properties like list actions to be excluded and Xml code etc.
Regards,
Venkat.Hi Venkat
I hope you are well and many thanks for using the discussion forums .
In relation to the scenario that you have described you mentioned that:
Once a user (via the MSS Inbox) clicks on the display form for travel request you are encountering a 404 resource not found error.
Ok so the first means of analysis is to ensure the UWL Destination Service Configuration is setup and maintained accordingly. Kindly review and consult the documentation below carefully.
SAP Note: 1133821 - UWL Destination Service configuration
After ensuring the destination(s) are setup accordingly and if the issue persists kindly restart the UWL service and clear the UWL cache to see if that resolves the issue.
In the destination configuration kindly ensure there are no discrepancies or misconfigurations.
Now have you navigated to your current connector setup and viewed the status columns to see if there are any exceptions appearing?
Lastly kindly check if the URL being called (at the request page) is correct.
Kindly update me as per your findings.
Kind Regards & All The Best
Troy Cronin - Enterprise Portal Support Engineer -
" Treasury" & "Travel Management" Configuration Material
Dear Sir/Madam,
Can Anybody Plz send me the Configuration Material For " Treasury" & "Travel Management"
Regards
KisChow
[email protected]Hi,
This the standard SAP documentation.
http://help.sap.com/saphelp_46c/helpdata/en/35/6f2a62268b2239e10000009b38f984/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/73/6bf037f1d6b302e10000009b38f889/frameset.htm
Svetlin -
Travel management - problem with post a trip for an employee in India
Hi,
I am configure travel management for a customer, in there SAP system. I have already made the configuration for countries like Sweden, Finland, Italy, Germany etc, but when I should do it for India I can not save a trip in PR05. I have copied the configuration (schema) from Sweden to India (India has no schema in standard) and that is no problem, but when I should enter a trip and save in PR05 I have the following problem:
1. It seems like I am in US because travelling country is per default USA (it should be India when I have linked the employee to the company code for India in transaction code PO13 and PA40). I can change the country to IN (India).
2. When I enter an expense type and amount, the system have a tax code for USA per default (I have configured that this expense type should choose a tax code in India but the system choose one for USA). I can change it to an Indian tax code.
3. The system also ask for a tax jurisdiction code on the row for expense type. Here I can choose 9999 as a dummy. But I have no idea why I have to specify that. I think that is typical for USA?
4. When I have changed the country to IN, the tax code to an indian tax code and specified the jurisdiction tax code to 9999 and then save I have got the following error message:
" Customization for 1600 j_1iindcus missing in table
Message no. 8I303" and when I have googled on that error message I found that I should go to:
IMG-Logistics General-Tax on Goods movement -India-Basic Settings-Maintain COmpany code settings
but that is according to logistics and everything else in the system as purchase etc is working fine with no problem with tax jurisdiction code so I don´t guess that I should change anything there if I destroy anything else.
5. If I change the country to IN and not register any trip expense but instead register trip segment, that the employee should have compensation for travelling with its own car and then save I have got the message that I have not maintained the currency USD/rupie which is a sign of that the systém beleives that we are in USA.
Please help. I have no idea how to come around this.
Best regards LisaHi again,
In transaction code FITVFELD I have IN as default country but if I change that country to another I still have US as trip country in PR05. In that transaction code (FITVFELD) I have domestic trip, international etc (like configuration in Sweden), but when I initialize a new trip for India I can not change trip type, if there is a domestic or international. When I do the same for Sweden I can choose so I wonder if the system get the information from USA from anywhere else.
I have also read about jurisdiction code and that is special for USA and Canada and then not for India?
Regards Lisa -
Travel Management configuration
Dear Friends,
I am new to travel Management. i want to do configure travel management. Please help me on this.
Please send some thread related to travel con fig it would be very great help for me.
Thanks in advance for your help.
MVRDear MVR,
Please follow the link below... This will lead you to the best practice documentation for travel management....
http://help.sap.com/bp_bl604/BBLibrary/HTML/191_EN_IN.htm
This will give you a basic understanding on travel management config...
Regards,
Raj -
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
-
How to configure Oracle BPEL Process Manager for JBoss 4.2.1
can any body help me to configure Oracle BPEL Process Manager for JBoss 4.2.1
Look here:
http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10538/toc.htm
Marc
http://orasoa.blogspot.com -
Hi Team,
We have Configuration manager 2012 SP1 and we have requirement to migrate winXP\Win7\Win8\Win8 systems to Windows 8.1 update 1. We are looking for supporting replace, refresh and baremetal OS deployments. Can anyone give some pointers for things we need
to take care while planning approach for migrations. OS image for windows 8.1 update 1 are created through MDT 2013 and we are planning to use Config manager 2012 SP1 for deploying these images with above scenarios.
Regards,More info:
Operating System Deployment in Configuration Manager
http://technet.microsoft.com/en-us/library/gg682018.aspx
OSD in System Center 2012 Configuration Manager
http://www.microsoft.com/en-us/download/details.aspx?id=42959
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
My iPhone 4s shuts down at least once a day, usually after I used it or when I'm not using it at all. It will not turn back on unless I reset it (by pressing home/power buttons) and when it turns back on, it runs like nothing happened. I have tried e
-
Hi there, My wife just finished uni and has no need for her laptop any longer. I have an iMac that she has created a user account on and now uses this more than her macbook pro. We want to give her macbook away so someone can use it however im not su
-
"Date Created" incorrect in Finder after copying image files from CF reader
Whenever I download image files (by drag and drop copying) from a CF card reader, the 'Date Created' info incorrectly defaults to 'Dec 31, 1903' in the List view of the Finder window. 'Date Created' shows up blank in the File Info window, too. Correc
-
hiiiiii m facing a big problem,wen i open my camera application blank screen appears i can't capture or shoot video coz i see othing on screen,i have switch off my mobile then it works normally untill again i reopen my camera application!!!! wot shou
-
Dynamic select with select-opitons
Hi all, i have a selction screen with a Select-options : S_monat for bkpf-monat. Depending on what the user has entered in that selection i need to select the field WOG001 to WOG016 from table COSP. for example if user has entered Period '01' to Peri