How to configure Solution manager 7.0

< MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi All Gurus,
I need your help...
Our customer is having ECC 6.0 with Oracle 10g and solution manager 7.0 installed but not configured. Now I need to install patches   in ECC 6.0 Server which need to be approved through Solution manager.
I have a task to configure Solution Manager 7.0 in their Landscape, but not sure about the steps to be followed in what sequence.
This is first I am going to configure solution manager 7.0, i need your help for this if you can define steps to be followed.
I got the installation and configuration guide, but I feel its not clear about the actual steps and their sequence.
If some one has his own guide please provide me if possible at [email protected]
Thanks in advance
Regards
Vinay Paul
Edited by: Vinay Paul on Jul 23, 2008 9:06 AM

Hi Anil,
Thanks for prompt response
I have ready downloaded the guide (solman_40_sr4_win_ora.pdf) but
I can't find the sequence of steps and moreover its not very much clear to me.
If you have any idea about the configuration part can you help me out...
Regards
Vinay Paul

Similar Messages

  • How to configure solution manager service desk knowledge base for customer?

    Hi Expert,
    How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
    Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
    Please advice,
    Thanks
    regards,
    ng chong chuan

    >
    Chong Chuan Ng wrote:
    > How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
    >
    > Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
    Hi,
    It's a good idea, but currently it's not yet supported.
    In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
    With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
    Best regards,
    Ruediger

  • How to Configure Solution Manager 3.2 for Support Desk

    Please give me information for configure solution manager 3.2 for support desk. What r the steps to configure ?.
    satinder lamba

    Hi,
    Check these
    /people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
    /people/kamran.ellahi2/blog/2006/01/13/setting-up-sap-service-desk-123-and-go
    https://websmp201.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
    This will allow you to succeed in configuring your Service Desk.
    Feel free to revert back.
    --Ragu

  • How to Configure Solution Manager for 1.Download SuppPacks 2. Monitoring 3

    We recently upgraded to ECC 6.0 and installed Solution Man., very vanilla.  Basically just to get the Key to do the upgrade with.
    I would really appreciate it if someone could share any documentation that would provide guidance on how to now further configure SolMan for the following
    1.  Monitor our Landscape which comprises of ABAP ECC (java is installed though not actively using), and SAP BI 7.0
    Sandbox, Dev, QAS and Prdn  for BOTH ECC & BI
    2. Download Support Patches from SAP Marketplace (currently we have had to donwload the long way with download manager creating a message to get them apporoved whew... this is work..)
    3. Add messages to SAP Market Place (thru SolMan)
    4 Possibly monitor security and manage userids etc (if possible)
    And if there is functionality that will make the BASIS experience better I would definitely appreciate it.  We don't need the help desk as we already have it ,but, we may take advantage of Project documentation
    I would really really appreciate it if someone could advise
    Kind Regards & Thank You
    Maria

    Hi Maria,
    With solution manager you can definitely do a world of things, below is a list inclusive of the features you wanted:
    1. Dowload SP-Stacks, etc - you will have to configure Maintenance Optimizer for this (MOPZ).
    2. Monitoring - you can monitor your ABAP and JAVA stacks using the monitoring features of CCMS which is embedded in Solution Manager, please have a look at the monitoring setup guide (for NW04S) in the Service Marketplace. Basically, it uses agents such as SAPCCMSR for JAVA Stacks and SAPCCM4X for ABAP stacks.
    3. You can also configure availability monitoring using th same guide as above - this uses the CCMSPING tool.
    4. You can monitor your business processes using the BPM/BPMon features of solution manager - you will also get this guide in http://service.sap.com/solutionmanager.
    5. You can scheule your earlywatch alerts (EWAs) in solution manager system - have a look at the following link for this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
    6. You can also have DBACOCKPIT on your Solution Manager system and have it tomonitor backups, etc on your satellite systems. For thsi have a look at SAP notes 1028624, 1025707 and 1027146 (and the DBACOKPIT guide in SAP Note 1028624).
    Hope this is helpful. Kindly award points if useful.
    Thanks, Dibya

  • Configuration Solution Manager - Travel Management for Route Cause Analisys

    Hi,
    Can you describe how to configure Solution Manager to monitor (RCA-E2E) our Travel System (SAP Enterprise Portal + SAP HR)?
    Best regards,
    Diego.

    Hi,
    RCA configuration remain same for all the module/component
    All the steps are there in RCA Configuration thread
    SPRO>SAP SOlutionManager Implementation Guide> SAP Solution Manager>Basic settings> Root Cause analysis
    here you can find all the information regarding setup, please follow one after the other.
    Regards,
    Shyam.

  • How to Link Solution manager with ECC?

    Hi Friends,
    i am new to solution manager. can any one help me how to link solution manager with other SAP servers like ECC, CRM, SRM? if anybody has paterial for the configuration can u send me, i will be very much thankful for that? my mail id is [email protected], [email protected]
    thank you,
    devendran.

    hi Nick thanx for you reply. i was trying your way and the pop-up  asking the System name, Product, Product version and the installation number. (is it the right screen which i am opening? if it is not then help me out).
    my doubt is what to give in the system name. i had given ECC500 and it is not taking. is there any specific charater to enter i this field? if it is there then where we are maintaining it?
    in the product field i entered SAP R/3 Enterprise and Product Version SAP R/3 Enterprise 47x200 from F4 option.
    the next doubt is what is the Installation number and what to give in that.
    Regards,
    Devendran

  • How to make Solution Manager 7.0??

    Hi Experts,
    I am totally new to Solution Manager.I have installed it & when it I am checking
    System->status->component version--->Solution Manager 4.0
    ST Stack is - 15.
    How to make Solution Manager 7.0?Which Support pack level I need to apply to make it Solution Manager 7.0?
    For EWA,MOPZ Configuration what should be the minimum stack level of ST??

    Hello N.Das
    Solman 7.0 IS Solman 4.0 . I mean only the name has been changed so it goes with version of Netweaver; nothing more than that. So you have Solman 7.0. right now !
    concerning the minimum SP Level for functionalities EWA and MOPZ. There is no correct answer. In your current Level you already have both; but ( and that is especially the case for MOPZ) new features have been added since ST15.
    Current latest Solman version is EHP1 ST23.
    Depending on what functionalities you re interested in MOPZ you will be able to choose the minimum level required.
    If i were you I would go for the last one, especially because it contains new bug fixes and valuable enhancement for MOPZ
    On this link you can check what is in what version of Solman: https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000089906&
    Regards,
    Khalil

  • How to Configure Transport MAnagement system in CHARM

    Hi
    How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
    Can any one tell me the detailed process? If you have any Configuration document please share it to me
    Points will awarded for helpful answer
    Thanks
    Bhaskar

    In a two system landscape is it necessary to make development the domain controller always?
    No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
    This is not recommended.
    Regards,
    Ashutosh

  • Configuring Solution Manager: Alternative Role to SAP_ALL

    This is a general question regarding configuring Solution Manager and note 834534.  I am configuring Solution Manager 7.0 at a client site.  The main components that I am configuring are on the Monitoring and Operations side; for example, System Monitoring,  Service Desk, Issue Management, and Change Management for Maintenance Optimizer.  CHaRM will follow later on.  Additionally, the client would like to use the project side of Solution Manager.
    When I took training for Solution Manager from SAP, the SAP instructor advised the class to have SAP_ALL when configuring Solution Manager  The problem I am having is that the client will not issue me SAP_ALL in the Solution Manager instance, regardless of the recommendation in note 834534.  I can understand the client's reluctance to issue SAP_ALL, even though Solution Manager is not a financial system in of itself, however, I have found that I am constantly having to ask for authorizations as I step through the wizards and the Scenario-specific settings.  When I run into issues which require further investigation by running transactions to check certain settings that are not specifically tiedd to a wizard or scenario-specific setting transaction, I run into further delays as I ask for additional authorizations to troubleshoot issues.
    We have implemented the roles and assigned them to my ID in Solution Manager as outlined by the SAP Solution Manager Security Guide to the fullest extent possible; and I have been issued "Basis Roles" that the client issues to their Basis team.  Regardless of these actions, I still run into authorization issues.
    My question is, apart from the SAP Solution Manager Security Guides recommendations (which does not mention SAP_ALL), is there a role being developed, or has been developed that can be assigned to the Solution Manager configurator in lieu of SAP_ALL (as per note 834534)?  I would think that this issue has been raised before, particularly since many companies have implemented SOX controls and are skittish about issuing SAP_ALL.
    Your feedback is most appreciated.

    Thanks for the reply, Nesimi.
    While I appreciate that you do not use SAP_ALL, is that the case when you are configuring a brand new, clean system?  Are you using the Configuration Wizards with out SAP_ALL? I ask this because when I ran the first configuration wizard, one of the steps is to create a "configuration user", which creates a user with SAP_ALL. However, I cannot use that wizard generated user ID because it has the role SAP_ALL.
    In general, I am operating on 3 sources of information that says I need SAP_ALL to configure the system (not necessarily to operate it):
    1.  An SAP Instructor for the Solution Manager Operations and Monitoring Class
    2.  The IMG Activity "Create Configuration User" documenation in SPRO
    3.  Note 834534
    I will review the english version of the link http://help.sap.com/saphelp_smehp1/helpdata/de/40/8ac473d40943ddb23def12bdb33437/frameset.htm that you have thoughtfully provided. 
    With respect to note 123640, I am not sure if that solves my problem or answers the fundemental question that I have in that given the 3 sources I quoted above.  It seems to me that SAP's approach in indicating clearly that they prefer that the configuration user should have SAP_ALL is flawed given today's corporate governence policies.  Clearly this recommendation is only for the initial configuration, and SAP_ALL can be taken away and replaced by the roles and recommendations in the SolMan security guide; to maintain Solution Manager.  But when it comes down to the question "what do you need to configure Solution Manager, because we won't give you SAP_ALL", I am hard pressed to give an answer despite literally spending hundreds of hours researching "documenation" which does not give clear cut answers.  I think SAP needs to address this issue instead of taking the easy way out and saying you need "SAP_ALL" as illustrated in the 3 sources of readily available information cited above.

  • How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

    i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

    Please follow below technet article :
    http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
    Installing and Configuring Workflow Manager 1.0 (Step by Step)
    Note: The steps in this article apply to SharePoint Server 2013.
    The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • How to configure Enterprise Manager in Active Data Guard?

    Hi,
    I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
    I have installed oracle11g Active Data Guard using Single alone Database.
    Both RAc and Active Data Guard works fine.
    I have not configure Data Guard Broker.
    Question: How to configure Enterprise Manager in Active Data Guard?
    Thanks
    Solaiman

    http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

  • How to Configuration PDC Management in SAP

    Dear Gurus
    Please guide me how to configuration PDC management in SAP FI.
    Regards
    Tapan Maity

    Hello Tapan,
    Your requirement is not clear. Is PDC mean Plant Data Collection?
    If yes, then PFB the required link for that.
    Supply Chain Management - Plant Data Collection SAP R/3 Shop Floor Control (PP-PDC)
    SAP ECC - Plant Data Collection - Time, Attendance and Employee Expenditures (HR-PDC)
    I hope it helps else revert us with your query.
    Thanks & Regards,
    Lakshmi S

  • How to integrate Solution Manager system to Enterprise Portal

    Hi all,
    HOW TO INTEGRATE SOLUTION MANAGER SYSTEM TO ENTERPRISE PORTAL SYSTEM

    Hi,
    First establish SSO between portal and solution manager.
    make the iview from com.sap.portal.epsolman.EPSolman
    check the link for help
    ep and solution manager support desk
    Thanks
    Santosh

  • How to configure Enterprise Manager both node (2 node) RAC?

    Hi,
    I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
    I have installed oracle11g Active Data Guard using Single alone Database.
    Both RAc and Active Data Guard works fine.
    I have not configure Data Guard Broker.
    I have configure Enterprise Manager during RAC database installation.
    When I start Enterprise Manager from node1 its address to node1
    but when I start Enterprise Manager from node2 it also addressed to node1.
    When both node is up and running, I can connect from Enterprise Manager.
    When node2 is down but node1 is up then also I can connect from Enterprise Manager
    but when node1 is down and node2 is up I can't connect from Enterprise Manager.
    Question: How to configure Enterprise Manager so that I can connect through it whenever any single node is running?
    Thanks
    Solaiman

    http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

  • Problem in CHaRM Configuration - Solution Manager 4.0 SP16

    Hi All,
    We are in the process of configuring CHaRM in Solution Manager 4.0 with SP16. We have created the project and the activated CHaRM for that project and created the task list as well.
    We are able to create the Change Request transaction and also approve the transaction successfully.
    ISSUE
    The popup of selecting a maintenance cycle while approving the Change Request is not appearing.
    When we go to the document flow and select the next document it says
    No maintenance cycle is open for the current system
    Message no. SOCM_ACTION_LOG011
    Maintenance Cycle is very much active when we check from transaction /tmwflow/cmsconf --> Environment --> Scheduling --> Display maintenance cycles.
    We are not able to see any maintenance cycle from transaction code crm_dno_monitor
    Any help would be highly appreciated.
    Thanks and Regards
    Siddarth

    I have a question regarding the organization of Solutions in Solution Manager.
    First, I have 3 solution manager boxes
    1 Sandbox
    2 Dev
    3 Prod
    In sandbox, I have a sandbox 'solution' that contains all sandboxes
    In dev, I have no 'solution'
    In production, I have all dev through production boxes lumped into one 'solution'.
    I was thinking that maybe I should break up the solution in Production to have only prod boxes, and then build one in dev that contains dev and qa boxes. 
    My question is that when I configure CHARM to manager transports, will that work to separate DEV/QA from Prod OR will I need all the dev, qa, prod boxes in one 'solution' since that is how transports flow??

Maybe you are looking for