Configurator Hangs in Oracle Linux
I'm trying to simply install and configure Essbase Server (11.1.2.2) in a Linux environment.
I thought Oracle Linux was compatible, but I cannot for the life of me get the configurator to do anything in Oracle Linux.
I've tried installing and configuring in version 6.4 and 5.9.
This works fine in RedHat, but I don't have a RedHat subscription to continue using RedHat 5.
What happens to the configurator is it'll get to the point of trying to configure Hyperion Foundation, but nothing happens.
No percentage, no progress bar, no status, nothing, it just hangs. It won't even create the epmsystem directory until I hit cancel.
It also hangs if I try ./configtool.sh -console
Unfortunately no, but I did figure out what was wrong.
Hyperion wasn't resolving the hostname properly.
I discovered this by using the epmsystem-hostname utility in /Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0
It was coming back with an error that it couldn't resolve the InetAddress
So I had to add the server's ip address and name to /etc/hosts, and after doing that, epmsystem-hostname was able to resolve the name and the configurator finally ran properly.
And like I stated above, I could get the configurator to run, but it just wouldn't do any actual configuring on the screen after I selected the items to configure and clicked next.
Similar Messages
-
Basic installation: X11 for Oracle Linux 6.3
Hi All,
I created Oracle VM and installed Linux 6.3 as operation system. First try with X Windows and X11 shows, that I can not start X-Appse.g. xclock --> command not found!
How can I correct install oderwise configure X11 for Oracle Linux 6.3
Regards,
MohI guess Oracle VM VirtualBox and Oracle VM can be misleading. Oracle should better call it Oracle Virtualbox, without VM in the name. Fyi: http://www.oracle.com/us/technologies/virtualization/oraclevm/index.html
Anyway, a default installation of Oracle Linux or RHEL 6 does not install the X Window system and a graphical user desktop. If you want to run X11 applications you have 2 options:
- Use remote access from a system that has X Window server installed
- Install X Window and a window manager on your virtual machine.
If this is a new installation and you use it locally then I suggest to re-install the system and customize the package selection. You should see a prompt "customize now" during the installation where you can select the Desktop packages. -
How to configure Oracle Linux 6.5 to request ip address from dhcp server
I have installed Oracle Linux 6.5 (minimal installation) on a virtual machine created on VMware vSphere 5.5. I have tried to configure dhcp during the installation by editing IPv4 Settings of System eth0 to use Automatic (DHCP) but somehow it does not work.
Then I changed the ifcfg-eth0 to use static ip address and that works.
Here is the content of /etc/sysconfig/network:
NETWORKING=yes
HOSTNAME=TESTOL
Here is the content of /etc/sysconfig/network-scripts/ifcfg-eth0 using static ip address:
DEVICE=eth0
TYPE=Ethernet
UUID=xxxxxxxx.xxxx-xxxx-xxxxxxxxxxxx
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=xx:xx:xx:xx:xx:xx
IPADDR:##.##.###.###
PREFIX=24
GATEWAY=##.##.###.###
DNS1=##.##.###.###
DOMAIN:test.com
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
Based on my understanding, I should able to use dhcp by changing ifcfg-eth0 (I commented the parameters not needed for dhcp by adding #) but I have tried the following ifcfg-eth0 and it does not work:
DEVICE=eth0
TYPE=Ethernet
UUID=xxxxxxxx.xxxx-xxxx-xxxxxxxxxxxx
ONBOOT=yes
NM_CONTROLLED=yes
#BOOTPROTO=no
BOOTPROTO=dhcp
HWADDR=xx:xx:xx:xx:xx:xx
#IPADDR:##.##.###.###
#PREFIX=24
#GATEWAY=##.##.###.###
DNS1=##.##.###.###
#DOMAIN:test.com
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
I have also tried to add GATEWAY=##.##.###.### to /etc/sysconfig/network but that does not help.
I have checked that dhclient package is installed by using rpm -qa dhclient.
I'm new to Linux.
Thanks for any helpIf this is your first experience with Oracle Linux, I recommend you perform a default installation instead of going minimal, which is just going to make things more difficult for no good reason. Enterprise Linux is not MS Windows and the difference between default and minimal installations do not compare.
You also do not want to use the rpm utility to install any software and use yum instead. The yum utility is standard. Rpm does not resolve software dependencies.
Your ifcfg-eth0 script is missing the line that specifies to use DHCP:
BOOTPROTO=dhcp
You can also use the network configuration utility, even in text mode, by typing the following at the command prompt of root:
system-config-network
If the above utility is not installed:
yum install system-config-network-tui
You will have to configure an appropriate yum repository file. The process is explained in the Oracle Linux release notes:
https://oss.oracle.com/el6/docs/RELEASE-NOTES-U5-en.html
See 3.2.3. About Oracle Linux Installation Media
Then insert the DVD or attach the DVD iso image to your virtual machine and mount it as following:
mkdir -p /media/ISOimage
mount /dev/cdrom /media/ISOimage
The path "/media/ISOimage" should be the same as you specified in the yum repository file.
After that you can use the yum utility to list or install software. -
[Oracle Linux 6.3] Impossible to configure ASMlib
Hi,
[root@ahmed-ol6 sf_Softs]# uname -a
Linux ahmed-ol6 2.6.32-279.19.1.el6.i686 #1 SMP Tue Dec 18 15:04:25 PST 2012 i686 i686 i386 GNU/Linux
[root@ahmed-ol6 oracle]# cat /etc/oracle-release
Oracle Linux Server release 6.3
[root@ahmed-ol6 sf_Softs]# cat /proc/partitions
major minor #blocks name
8 0 17337344 sda
8 1 512000 sda1
8 2 16824320 sda2
8 16 1048576 sdb
8 17 1044193 sdb1
8 32 1048576 sdc
8 33 1044193 sdc1
8 48 1048576 sdd
8 49 1044193 sdd1
8 64 1048576 sde
8 65 1044193 sde1
8 80 2097152 sdf
8 81 2096451 sdf1
8 96 2097152 sdg
8 97 2096451 sdg1
253 0 11612160 dm-0
253 1 5210112 dm-1
[root@ahmed-ol6 oracle]# rpm -qa | grep oracleasm
oracleasmlib-2.0.4-1.el6.i686
oracleasm-support-2.1.5-1.el6.i686
[root@ahmed-ol6 sf_Softs]# oracleasm configure -i
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface [oracle]:
Default group to own the driver interface [oinstall]:
Start Oracle ASM library driver on boot (y/n) [y]:
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
[root@ahmed-ol6 sf_Softs]# oracleasm init
Loading module "oracleasm": failed
Unable to load module "oracleasm"
[root@ahmed-ol6 sf_Softs]# service oracleasm restart
Dropping Oracle ASMLib disks: [ OK ]
Shutting down the Oracle ASMLib driver: [ OK ]
Initializing the Oracle ASMLib driver: [FAILED]Can someone help me to understand what's going on here?
I have installed the package found on OTN here:
[http://www.oracle.com/technetwork/server-storage/linux/asmlib/ol6-1709075.html]
I've understood that the OracleASM kernel driver is no longer needed in OL6 because it's included in the kernel.
So what's the problem?
Thanks for helpingDude wrote:
ASMlib is not mandatory, but makes managing ASM devices easier to manage and provides a more efficient I/O path. Some of it is negotiable, however, I think your negative experience with the product in the past is NO good reason to advice how obsolete or useless ASMlib was. Because, sorry, it isn't. Please do the research.
The reason why oracle ASMlib is included and supported only by the Oracle UEK kernel is not to force people to use Oracle Linux, but due to Red Hat. Oracle was obviously forced to support Oracle kernel modules only for their own kernel, for very good reasons. Red Hat officially said "Yes, we undercut Oracle with hidden Linux patches".
http://www.channelregister.co.uk/2011/03/04/red_hat_twarts_oracle_and_novell_with_change_to_source_code_packaging
Edited by: Dude on Jan 23, 2013 5:53 PMSo for those of us that do not use UEK, whether or not to use ASMLib is really not an option. If it is not supported, I would hate to "force" install it and have something go wrong on my production servers. So, whether or not I do the "research", the fact it will not be supported on RHEL6 only enforces my opinion does it not? -
Could not find Wireless network configuration Oracle linux Enterprise
HEllo,
I was able to install oracle linux OS on my laptop and I was able to use internet thru wired network, but I tried to config the wireless network and I could not find any docs or online source to config wireless network on OLE machines.Belwo is the source that i used for installing the linux, he gave only one scrrenshot for network configuration where I see wireless tab also,but nothing is working when i configure wirless
http://www.oracle-base.com/articles/linux/oracle-linux-6-installation.phpiamsid wrote:
HEllo,
I was able to install oracle linux OS on my laptop and I was able to use internet thru wired network, but I tried to config the wireless network and I could not find any docs or online source to config wireless network on OLE machines.Belwo is the source that i used for installing the linux, he gave only one scrrenshot for network configuration where I see wireless tab also,but nothing is working when i configure wirless
http://www.oracle-base.com/articles/linux/oracle-linux-6-installation.php
Wrong forum. Your question has nothing to do with Oracle Database Installation. You might try the [url https://forums.oracle.com/forums/forum.jspa?forumID=822] Oracle Linux forum..
When you post there it will be helpful if you will provide some detail on what you actually did and and the result. So far all you've really said is "Here is a picture of a Ford. Why can't I get my Chevy to run?" -
Oracle Linux 4 hangs after first reboot....@ GRUB Loading stage2
Hi Linux experts,
after I installed Oracle Linux 4(on Vmware), I go through the 4 ISO images(that I had burnt to CDs)...After the 4th CD is done, I have to do the first Linux reboot...Linux hangs on
"GRUB Loading stage2...."
Any idea how to fix this?
Thanks.Hi,
I'm using Chan's article to install Linux on top of Vmware. His article is on http://www.oracle.com/technology/pub/articles/chan-bul-vmware.html#2.
Maybe I missed step 11 of his instructions.....but it says leave the default /dev/sda1...thats what I did. -
/dev/shm on Oracle Linux 6.x to run Oracle 11g R2 - manual configuration?
Hello
We are building a server to run Oracle 11g R2 database (11.2.0.3 x64) on Oracle Linux 6.2 with UEK R2.
Our preference is to use AMM to have Oracle 11g R2 manage memory. We may impose some minium SGA and PGA memory allocations but basically aim to use MEMORY_TARGET to manage overall memory.
By default Linux makes the size of /dev/shm ~50% of server physical RAM, as far as I can tell.
Here is the /etc/fstab entry created by the installation:
tmpfs /dev/shm tmpfs defaults 0 0
Given this Linux server will only run Oracle 11g R2 database and some monitoring software, almost application code will run on the server. The application code will run on the separate application server and is Java based.
Can I change the */etc/fstab* entry for /dev/shm to manually increase the size to take up ~80-90% of the server physical RAM ? Is it a good idea?
The server is 64-bit, the RAM = 64 GB, so I am thinking to manually make /dev/shm to be = ~55GB, leaving ~8GB for other purposes.
Right now it's about 32GB (50%?) if I leave the /dev/shm 'defaults' on.
many thanksthanks,
I have read the doc (what little there is on this topic).
I have asked on the database forum......
just FYI - below is the proof:
SQL> show parameter mem
NAME TYPE VALUE
hi_shared_memory_address integer 0
memory_max_target big integer 4G
memory_target big integer 0
shared_memory_address integer 0
SQL> show parameter ga
NAME TYPE VALUE
lock_sga boolean FALSE
pga_aggregate_target big integer 1600M
pre_page_sga boolean FALSE
sga_max_size big integer 3G
sga_target big integer 1600M
still does not work.
And I cant change memory_max_target = 0 because I get error on startup:
SQL> alter system set memory_max_target=0 scope=spfile;
System altered.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-00843: Parameter not taking MEMORY_MAX_TARGET into account
ORA-00849: SGA_TARGET 3221225472 cannot be set to more than MEMORY_MAX_TARGET 0.
BUT if memory_max_target is > 0 then alert log says hugepages can not be used
it feels like catch-22.....
thanks
Edited by: yurib on Jun 1, 2012 4:53 PM -
Gnome automount and media.repo under Oracle Linux 6.3
Hello,
I experiencing a strange behavior testing the following under Oracle Linux 6.3 (x86-64-bit) UEK2 with all latest updates. I selected the Gnome desktop packages using the "customize now" ratio button when installing the OS
* Log in to a graphical shell such as GNOME
* Insert addition media disk into the computer
* Observe the media is mounted by the session
* Wait a couple of seconds
* Observe the /etc/yum.repos.d/packagekit-media.repo now exists
The above is explained in more details at http://people.redhat.com/rhughes/media-repo.txt
I don't know what the "addition media disk" is, but inserted the Oracle Linux 6.3 x86_64 binary distribution DVD, which also has media.repo file in the root directory. And btw, I'm using VirtualBox and the DVD is an .iso disk image.
I'm experiencing the following:
Gnome automount works and automatically opens the DVD when inserted.
It does not create the /etc/yum.repos.d/packagekit-media.repo file.
It actually does create the named repo file, but only after one waits about 15 minutes. Perhaps this has anything to do with gpk-update-icon, but when run manually it hangs.
With the packagekit-media.repo file finally created. The gpk-application however complains: "The group list was invalid".
I know how to create a yum configuration file pointing to a local repository, which is also coverd in the Oracle Linux 6.3 distribution readme. I just wonder about the problem. Th automatic business with the media.repo file seems broken and useless. I did one more test using the original RHEL kernel which, as expected, did not make a difference.
Does anyone know more about it?
Thanks!I cannot create an SR, but I did some more tests creating my own DVD, playing with the info in the media.repo file. It seems matching the mediaid and .discinfo information alone doesn't fix it.
Actually some of the stuff is explained in the link I already used: http://people.redhat.com/rhughes/media-repo.txt. The problem seems that it doesn't work as advertised.
It takes exactly 15 min. before the system (gnome) automatically copies the media.repo file from DVD to /etc/packagekit-media.repo. If the file already exists it gets overwritten.
I think it might be a good idea to make an entry in the media.repo file on the DVD, such as:
baseurl=file:///media/<disklabel>
skip_if_unavailable=True
Then when inserting the DVD under gnome it would not be necessary to create a yum repository configuration file to use the DVD. The 15 min. delay will have to be fixed, which is only supposed to take a couple of seconds.
Edited by: Dude on Aug 27, 2012 5:51 PM -
Hello!
I will kindly ask for your honest opinions as I want to study for an Oracle Linux exam and I need to get the below indicated topics covered, but unfortunately I could not find a book to cover them all (as I did for Oracle 11g).
Please help me locate a book, two or how many are necessary to help me study for the exam and cover the following topics:
Thank you all!
Installing Enterprise Linux
Install Enterprise Linux on any supported architecture.
Create partitions, software RAID and LVM storage configurations.
Select Packages for Installation.
PC Hardware & Linux
Get detailed information about all PCI & USB devices that are connected to a Linux system
Identify, load, unload and configure kernel modules
Tune the running kernel using the /proc/ filesystem
Post-Install System Configuration
Set and maintain the system clock with date, hwclock and NTP
Install, update and remove RPM packages with the rpm & yum commands
Configure printers with CUPS
Create and use Kickstart files for automated, hands-off installations
Boot Process & SysV Init
Configure the GRUB boot loader
Manage SysV Init scripts, including customizing files under the /etc/sysconfig/ directory to tune SysV Init scripts
Configure and use SysV runlevels
Shutdown & reboot Linux systems
User/Group Administration and NFS
Describe and apply the User Private Group scheme
Create, delete and configure user and system accounts
Create, delete and configure groups
Customize the PAM configuration
Configure and control access to su and sudo
Configure Linux systems to use centralized authentication and user information stores for system logins
Implement a file server to share files with NFS v3 & v4
Configure the automounter (autofs) allowing un-privileged users to mount filesystems on-demand
Filesystem Administration
Work with device nodes and udev
Partition hard drives after installation
Create and tune filesystems
Mount filesystem, including persistent configuration in the /etc/fstab file
Create, manage and tune swap devices
Configure, manage, assign and maintain quotas on filesystems
Create, use and remove File Access Control Lists (FACLs)
LVM & Raid
Configure Logical Volume Manager volume groups and logical volumes
Create and use software RAID devices
Grow and shrink logical volumes and the filesystems on them
Use LVM snapshots to create consistent, reliable backups
Task Automation & Process Accounting
Use the at & batch facilities to run one-time tasks
Manage cron jobs for recurring tasks, both system-wide and per-user
Configure syslog for central system logging
View, manage and kill running processes
Monitor system and application logs on a daily basis with logwatch
Configure process accounting and examine the resulting logs
Limiting and measuring resource usage (ulimit, pam, sar, vmstat, iostat)
Client Networking
Configure TCP/IP networking on Linux systems
Configure static routing on a Linux system
Aggregate multiple network links into a single interface via the bonding driver's Etherchannel and 802.3ad support
Configure a Linux system to participate in multiple VLANs on a managed switch via 802.1q frame tagging
Configure and maintain a DHCP server
Using networking diagnostics tool (ping,arp,ethtool)
Enterprise Linux Fundamentals
What is Linux?
Identify the origins of UNIX and how Linux is related to UNIX
Describe the major goals of the Free Software Foundation and the GNU project
List key elements of a Linux distribution and name several distributions
List several standards that apply to Linux
Describe the basic mechanisms that make UNIX so powerful
Multi User Concepts
Describe the differences between the administrative (root) user and normal user accounts and explain when each should be used
Log into the system
Switch between accounts using the 'su' command
Use basic commands to gather information about the system
Use system help facilities to learn about commands and their options.
The Linux File System
List the standard system directories and explain what type of files are contained in each
Navigate the file system
Explain standard POSIX file permissions including special permissions such as the SUID, SGID and Sticky bits on both files and directories
Change permissions of files
Explain how file ownership (user: group) relates to file permissions
Change ownership of files
Describe how the User Private Group (UPG) scheme works and the problem it solves
Manipulating Files
Be able to create, delete, copy, move and rename files and directories
Describe the various types of files that can be stored on UNIX and Linux file systems
Explain hard links and symbolic links, their pros & cons and when & where they can or can not be used
Identify the type of content of any file
View the contents of both text-based and binary files
Search the file system for files and directories with specific properties
Text Processing
Search inside of files for specified information
Perform file editing, sorting, cutting & merging text files from the command linee
Shell Basics
Understand the varied roles the command shell plays in everyday UNIX/Linux usage
Pipe several commands together to perform more complex and useful processing
Use file redirection on the command line
Create and use shell and environment variables to configure and control the operation of the system, the command shell and programs
Use and escape special characters when they are used on the command line
Regular Expressions Construct regular expressions for matching text patterns
Archiving and Compression
Use tar & cpio to create archives and extract files from them
Compress and decompress files using the UNIX compress, GNU gzip, bzip2 and zip formats
Text Editing
Use simple text editors like pico and nano
Perform basic and intermediate text editing functions efficiently with vi & Vim
Perform basic and intermediate text editing functions with GNU Emacs
Command Shells
List the history and relationships of the various popular shell implementations available on UNIX and Linux systems
Identify and switch between the various shell implementations
Customize the command prompt on Bourne and BASH shells
Use command line history, command completion, aliases and command line editing
Customize command shell operation system wide and for individual users
Introduction to Shell Scripting
Process arguments passed into a shell script
Get input from the user of a shell script
Generate formatted output from a shell script
Perform tasks conditionally using if, case and while loops in a shell script
Perform repeated actions over a set of values with for loops on the command line and within shell scripts
Do math in a shell script
Process Management and Job Control
Describe the differences between process and threads
Find and control running programs with ps, top, kill, and nice
Use the jobs, fg and bg commands to view and access several tasks at once on a single shell
Use the screen command to run several programs and disconnect from running programs on remote systems
Messaging
Send local messages with the write and wall commands
Use talk and ytalk to chat with other users
Send and read email with the mail and pine commands
The Secure Shell
Configure the ssh client and sshd server programs securely
Establish secure, remote connections to other systems
Use SSH's key-based authentication
Managing Software
Find and download software via FTP & HTTP with text & graphical client programs like wget, lftp, links, Konqueror and Mozilla Firefox
Install binary programs in RPM packages
List software already installed on the system with RPM
Compile and install software from source releases
Compile and install software from a source RPM (SRPM or .src.rpm) package
Printing
Use CUPS to connect to available local and network printers
Use various commands to process and convert files in preparation for printing
Send jobs to a printer
Monitor and remove print jobs
Mounting FileSystems and Managing Removable Media
Use the mount command
Access NFS and SMB filesystems over the network
Use autofs for on-demand mounting of filesystems without root privileges
X Window System
Start the graphical environment manually
Select different desktop environments
Launch graphical applications
Use Linux as an X terminal
Customize the graphical environment and auto-start applications at login and X startup
Securely tunnel remote graphical applications through SSHHello!
I will kindly ask for your honest opinions as I want to study for an Oracle Linux exam and I need to get the below indicated topics covered, but unfortunately I could not find a book to cover them all (as I did for Oracle 11g).
Please help me locate a book, two or how many are necessary to help me study for the exam and cover the following topics:
Thank you all!
Installing Enterprise Linux
Install Enterprise Linux on any supported architecture.
Create partitions, software RAID and LVM storage configurations.
Select Packages for Installation.
PC Hardware & Linux
Get detailed information about all PCI & USB devices that are connected to a Linux system
Identify, load, unload and configure kernel modules
Tune the running kernel using the /proc/ filesystem
Post-Install System Configuration
Set and maintain the system clock with date, hwclock and NTP
Install, update and remove RPM packages with the rpm & yum commands
Configure printers with CUPS
Create and use Kickstart files for automated, hands-off installations
Boot Process & SysV Init
Configure the GRUB boot loader
Manage SysV Init scripts, including customizing files under the /etc/sysconfig/ directory to tune SysV Init scripts
Configure and use SysV runlevels
Shutdown & reboot Linux systems
User/Group Administration and NFS
Describe and apply the User Private Group scheme
Create, delete and configure user and system accounts
Create, delete and configure groups
Customize the PAM configuration
Configure and control access to su and sudo
Configure Linux systems to use centralized authentication and user information stores for system logins
Implement a file server to share files with NFS v3 & v4
Configure the automounter (autofs) allowing un-privileged users to mount filesystems on-demand
Filesystem Administration
Work with device nodes and udev
Partition hard drives after installation
Create and tune filesystems
Mount filesystem, including persistent configuration in the /etc/fstab file
Create, manage and tune swap devices
Configure, manage, assign and maintain quotas on filesystems
Create, use and remove File Access Control Lists (FACLs)
LVM & Raid
Configure Logical Volume Manager volume groups and logical volumes
Create and use software RAID devices
Grow and shrink logical volumes and the filesystems on them
Use LVM snapshots to create consistent, reliable backups
Task Automation & Process Accounting
Use the at & batch facilities to run one-time tasks
Manage cron jobs for recurring tasks, both system-wide and per-user
Configure syslog for central system logging
View, manage and kill running processes
Monitor system and application logs on a daily basis with logwatch
Configure process accounting and examine the resulting logs
Limiting and measuring resource usage (ulimit, pam, sar, vmstat, iostat)
Client Networking
Configure TCP/IP networking on Linux systems
Configure static routing on a Linux system
Aggregate multiple network links into a single interface via the bonding driver's Etherchannel and 802.3ad support
Configure a Linux system to participate in multiple VLANs on a managed switch via 802.1q frame tagging
Configure and maintain a DHCP server
Using networking diagnostics tool (ping,arp,ethtool)
Enterprise Linux Fundamentals
What is Linux?
Identify the origins of UNIX and how Linux is related to UNIX
Describe the major goals of the Free Software Foundation and the GNU project
List key elements of a Linux distribution and name several distributions
List several standards that apply to Linux
Describe the basic mechanisms that make UNIX so powerful
Multi User Concepts
Describe the differences between the administrative (root) user and normal user accounts and explain when each should be used
Log into the system
Switch between accounts using the 'su' command
Use basic commands to gather information about the system
Use system help facilities to learn about commands and their options.
The Linux File System
List the standard system directories and explain what type of files are contained in each
Navigate the file system
Explain standard POSIX file permissions including special permissions such as the SUID, SGID and Sticky bits on both files and directories
Change permissions of files
Explain how file ownership (user: group) relates to file permissions
Change ownership of files
Describe how the User Private Group (UPG) scheme works and the problem it solves
Manipulating Files
Be able to create, delete, copy, move and rename files and directories
Describe the various types of files that can be stored on UNIX and Linux file systems
Explain hard links and symbolic links, their pros & cons and when & where they can or can not be used
Identify the type of content of any file
View the contents of both text-based and binary files
Search the file system for files and directories with specific properties
Text Processing
Search inside of files for specified information
Perform file editing, sorting, cutting & merging text files from the command linee
Shell Basics
Understand the varied roles the command shell plays in everyday UNIX/Linux usage
Pipe several commands together to perform more complex and useful processing
Use file redirection on the command line
Create and use shell and environment variables to configure and control the operation of the system, the command shell and programs
Use and escape special characters when they are used on the command line
Regular Expressions
Construct regular expressions for matching text patterns
Archiving and Compression
Use tar & cpio to create archives and extract files from them
Compress and decompress files using the UNIX compress, GNU gzip, bzip2 and zip formats
Text Editing
Use simple text editors like pico and nano
Perform basic and intermediate text editing functions efficiently with vi & Vim
Perform basic and intermediate text editing functions with GNU Emacs
Command Shells
List the history and relationships of the various popular shell implementations available on UNIX and Linux systems
Identify and switch between the various shell implementations
Customize the command prompt on Bourne and BASH shells
Use command line history, command completion, aliases and command line editing
Customize command shell operation system wide and for individual users
Introduction to Shell Scripting
Process arguments passed into a shell script
Get input from the user of a shell script
Generate formatted output from a shell script
Perform tasks conditionally using if, case and while loops in a shell script
Perform repeated actions over a set of values with for loops on the command line and within shell scripts
Do math in a shell script
Process Management and Job Control
Describe the differences between process and threads
Find and control running programs with ps, top, kill, and nice
Use the jobs, fg and bg commands to view and access several tasks at once on a single shell
Use the screen command to run several programs and disconnect from running programs on remote systems
Messaging
Send local messages with the write and wall commands
Use talk and ytalk to chat with other users
Send and read email with the mail and pine commands
The Secure Shell
Configure the ssh client and sshd server programs securely
Establish secure, remote connections to other systems
Use SSH's key-based authentication
Managing Software
Find and download software via FTP & HTTP with text & graphical client programs like wget, lftp, links, Konqueror and Mozilla Firefox
Install binary programs in RPM packages
List software already installed on the system with RPM
Compile and install software from source releases
Compile and install software from a source RPM (SRPM or .src.rpm) package
Printing
Use CUPS to connect to available local and network printers
Use various commands to process and convert files in preparation for printing
Send jobs to a printer
Monitor and remove print jobs
Mounting FileSystems and Managing Removable Media
Use the mount command
Access NFS and SMB filesystems over the network
Use autofs for on-demand mounting of filesystems without root privileges
X Window System
Start the graphical environment manually
Select different desktop environments
Launch graphical applications
Use Linux as an X terminal
Customize the graphical environment and auto-start applications at login and X startup
Securely tunnel remote graphical applications through SSH
How about posting this question in the Certification Forum
Since Oracle Linux is based on Red Hat Enterprise Linux, you can use and search "RHEL books". There should some. -
Oracle Linux 6.2 with RAC 11g cluster install fails on root.sh ioctl
I have 2 HP Servers I'm trying to install a cluster to.
I've tried Oracle Linux 6.2 and 6.3 with the same error on both nodes when running the root.sh script.
I have tried the permissions, run-levels, etc that I have found in the forum and nothing has worked except the deconfigure works great. /u01/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig -force
root.sh Errors:
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start at /u01/app/11.2.0/grid/crs/install/rootcrs.pl line 443.
I can't see whats wrong, I did use ASM to configure iSCSI disks from a storage device which appeared to work correctly:
# oracleasm listdisks
VOL1
VOL2
VOL3
VOL5
# ls /dev/oracleasm/disks/
VOL1 VOL2 VOL3 VOL5
When I created the disks with ASM I used multipath successfuly:
# oracleasm createdisk VOL1 /dev/mapper/23535333762373932
The other node can see the disks just fine with oracleasm listdisks
I chose 3 disks for the OCR - VOL1-3
There was one forum work around to edit the $GRID_HOME/crs/install/s_crsconfig_lib.pm which I did no Oracle Linux 6.3 to no avail. I also tried using NFS mounted volumes for the OCR drives but got the same error.
Using the install: linux.x64_11gR2_gridoracleasm (aka asmlib) may not be supported on RHEL(OEL) 6.x. You do NOT need asmlib and it's days are numbered.
upon review of this document, even though it was for 10g, it still appears to be relevant
"10g: Using Openfiler iSCSI with an Oracle RAC database on Linux [ID 371434.1]"
and
udev utility can be used for disk mounting consistency between the nodes. It is the preferred tool. Note:371814.1 explains how to use the udev option.
and
Can't install GI 11gr2 (11.2.0.3) root.sh fail
Edited by: onedbguru on Dec 13, 2012 3:40 PM -
Hello!
I have Primary, two Physical Standby and one Logical Standby Servers.
$ uname -a
Linux host 2.6.39-200.32.1.el6uek.x86_64 #1 SMP Wed Sep 26 23:11:38 PDT 2012 x86_64 x86_64 x86_64 GNU/Linux
$ cat /etc/issue
Oracle Linux Server release 6.3
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> select * from dba_registry;
COMP_ID COMP_NAME VERSION STATUS MODIFIED NAMESPACE CONTROL SCHEMA PROCEDURE STARTUP PARENT_ID OTHER_SCHEMAS
CATALOG Oracle Database Catalog Views 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS SYS DBMS_REGISTRY_SYS.VALIDATE_CATALOG
CATPROC Oracle Database Packages and Types 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS SYS DBMS_REGISTRY_SYS.VALIDATE_CATPROC APPQOSSYS,DBSNMP,DIP,ORACLE_OCM,OUTLN,SYSTEM
OWM Oracle Workspace Manager 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS WMSYS VALIDATE_OWM
XDB Oracle XML Database 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS XDB DBMS_REGXDB.VALIDATEXDB
DGMGRL> connect sys/password
Connected.
DGMGRL> show configuration verbose;
Configuration - work_DataGuardConfig
Protection Mode: MaxAvailability
Databases:
primary - Primary database
physical1 - Physical standby database
physical1 - Physical standby database
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '30'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
$ rpm -qa
kernel-2.6.32-279.5.2.el6.x86_64
system-config-firewall-tui-1.2.27-5.el6.noarch
poppler-data-0.4.0-1.el6.noarch
mesa-dri-drivers-7.11-5.el6.x86_64
ghostscript-fonts-5.50-23.1.el6.noarch
libxml2-python-2.7.6-8.0.1.el6_3.3.x86_64
PyGreSQL-3.8.1-2.el6.x86_64
perl-Time-HiRes-1.9721-127.el6.x86_64
glibc-2.12-1.80.el6_3.5.i686
kernel-2.6.32-279.9.1.el6.x86_64
biosdevname-0.3.11-1.el6.x86_64
device-mapper-1.02.74-10.el6.x86_64
strace-4.5.19-1.11.el6_3.2.x86_64
aic94xx-firmware-30-2.el6.noarch
cpuspeed-1.5-15.el6.x86_64
matahari-network-0.6.0-14.el6.x86_64
rhino-1.7-0.7.r2.2.el6.noarch
elinks-0.12-0.20.pre5.el6.x86_64
libICE-1.0.6-1.el6.x86_64
lvm2-libs-2.02.95-10.el6.x86_64
perl-Crypt-SSLeay-0.57-16.el6.x86_64
libtar-1.2.11-17.el6.x86_64
perl-XML-Twig-3.34-1.el6.noarch
libidn-1.18-2.el6.x86_64
libreport-plugin-logger-2.0.9-5.0.1.el6.x86_64
crda-1.1.1_2010.11.22-1.el6.x86_64
lua-5.1.4-4.1.el6.x86_64
gnutls-2.8.5-4.el6_2.2.x86_64
yp-tools-2.9-12.el6.x86_64
attr-2.4.44-7.el6.x86_64
libtirpc-0.2.1-5.el6.x86_64
file-5.04-13.el6.x86_64
pax-3.4-10.1.el6.x86_64
zip-3.0-1.el6.x86_64
dash-0.5.5.1-3.1.el6.x86_64
latrace-0.5.9-2.el6.x86_64
kexec-tools-2.0.3-3.0.1.el6.x86_64
libasyncns-0.8-1.1.el6.x86_64
libertas-usb8388-firmware-5.110.22.p23-3.1.el6.noarch
nss-softokn-3.12.9-11.el6.x86_64
dbus-python-0.83.0-6.1.el6.x86_64
ql2200-firmware-2.02.08-3.1.el6.noarch
avahi-libs-0.6.25-11.el6.x86_64
nfs-utils-lib-1.1.5-4.el6.x86_64
redhat-indexhtml-6-1.0.2.el6.noarch
boost-regex-1.41.0-11.0.1.el6_1.2.x86_64
rpm-python-4.8.0-27.el6.x86_64
slang-2.2.1-1.el6.x86_64
perl-core-5.10.1-127.el6.x86_64
libselinux-2.0.94-5.3.el6.x86_64
iptables-ipv6-1.4.7-5.1.el6_2.x86_64
audit-libs-2.2-2.el6.x86_64
tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64
keyutils-libs-1.4-4.el6.x86_64
crash-6.0.4-2.el6.x86_64
python-setuptools-0.6.10-3.el6.noarch
perl-libs-5.10.1-127.el6.x86_64
lsof-4.82-4.el6.x86_64
perl-Module-Load-Conditional-0.30-127.el6.x86_64
libusb1-1.0.9-0.5.rc1.el6.x86_64
libunistring-0.9.3-5.el6.x86_64
rsync-3.0.6-9.el6.x86_64
libXi-1.3-3.el6.x86_64
perl-IO-Zlib-1.09-127.el6.x86_64
perl-HTML-Tagset-3.20-4.el6.noarch
libXt-1.0.7-1.el6.x86_64
perl-devel-5.10.1-127.el6.x86_64
boost-wave-1.41.0-11.0.1.el6_1.2.x86_64
scli-1.7.3-50.x86_64
libthai-0.1.12-3.el6.x86_64
perl-Compress-Raw-Bzip2-2.020-127.el6.x86_64
mpfr-2.4.1-6.el6.x86_64
foomatic-db-ppds-4.0-7.20091126.el6.noarch
eggdbus-0.6-3.el6.x86_64
libXxf86misc-1.0.2-1.el6.x86_64
libvisual-0.4.0-9.1.el6.x86_64
mysql-libs-5.1.61-4.el6.x86_64
libnih-1.0.1-7.el6.x86_64
oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
hal-0.5.14-11.el6.x86_64
libgcrypt-1.4.5-9.el6_2.2.x86_64
boost-test-1.41.0-11.0.1.el6_1.2.x86_64
glibc-common-2.12-1.80.el6_3.5.x86_64
mysql-5.1.61-4.el6.x86_64
ncurses-5.7-3.20090208.el6.x86_64
python-qpid-0.14-11.el6_3.noarch
qpid-qmf-0.14-14.0.1.el6_3.x86_64
matahari-lib-0.6.0-14.el6.x86_64
oracle-logos-60.0.11-9.el6.noarch
perl-Module-Build-0.3500-127.el6.x86_64
libhugetlbfs-utils-2.12-2.el6.x86_64
fontpackages-filesystem-1.41-1.1.el6.noarch
perl-Parse-CPAN-Meta-1.40-127.el6.x86_64
openswan-2.6.32-19.el6_3.x86_64
ncurses-libs-5.7-3.20090208.el6.x86_64
e2fsprogs-libs-1.41.12-12.el6.x86_64
dracut-004-284.0.1.el6_3.1.noarch
ConsoleKit-libs-0.4.1-3.el6.x86_64
udev-147-2.42.el6.x86_64
bind-utils-9.8.2-0.10.rc1.el6_3.4.x86_64
iwl5150-firmware-8.24.2.2-1.el6.noarch
unixODBC-devel-2.2.14-11.el6.x86_64
quota-3.17-16.el6.x86_64
xdg-utils-1.0.2-17.20091016cvs.el6.noarch
matahari-broker-0.6.0-14.el6.x86_64
mingetty-1.08-5.el6.x86_64
samba-common-3.5.10-125.el6.x86_64
usermode-1.102-3.el6.x86_64
abrt-addon-ccpp-2.0.8-6.0.1.el6.x86_64
perl-XML-Dumper-0.81-6.el6.noarch
libdhash-0.4.2-9.el6.x86_64
crontabs-1.10-33.el6.noarch
libevent-1.4.13-4.el6.x86_64
mtr-0.75-5.el6.x86_64
atk-1.28.0-2.el6.x86_64
sgpio-1.2.0.10-5.el6.x86_64
rdate-1.4-16.el6.x86_64
boost-system-1.41.0-11.0.1.el6_1.2.x86_64
latencytop-common-0.5-9.el6.x86_64
libsemanage-2.0.43-4.1.el6.x86_64
libtopology-0.3-7.el6.x86_64
libtheora-1.1.0-2.el6.x86_64
atmel-firmware-1.3-7.el6.noarch
cryptsetup-luks-1.2.0-7.el6.x86_64
python-dmidecode-3.10.13-1.el6.x86_64
ipw2200-firmware-3.1-4.el6.noarch
m4-1.4.13-5.el6.x86_64
bfa-firmware-3.0.2.2-1.el6.noarch
python-iwlib-0.1-1.2.el6.x86_64
libedit-2.11-4.20080712cvs.1.el6.x86_64
smartmontools-5.42-2.el6.x86_64
numpy-1.4.1-9.el6.x86_64
libcom_err-1.41.12-12.el6.x86_64
nmap-5.51-2.0.1.el6.x86_64
python-paramiko-1.7.5-2.1.el6.noarch
grep-2.6.3-3.el6.x86_64
tcsh-6.17-19.el6_2.x86_64
db4-4.7.25-17.el6.x86_64
db4-utils-4.7.25-17.el6.x86_64
perl-Params-Check-0.26-127.el6.x86_64
make-3.81-20.el6.x86_64
expat-2.0.1-11.el6_2.x86_64
SDL-1.2.14-3.el6.x86_64
libXext-1.1-3.el6.x86_64
freetype-2.3.11-6.el6_2.9.x86_64
xorg-x11-drv-ati-firmware-6.14.2-9.el6.noarch
libXft-2.1.13-4.1.el6.x86_64
perl-Term-UI-0.20-127.el6.x86_64
perl-XML-Parser-2.36-7.el6.x86_64
libXxf86vm-1.1.0-1.el6.x86_64
perl-Archive-Extract-0.38-127.el6.x86_64
xz-lzma-compat-4.999.9-0.3.beta.20091007git.el6.x86_64
device-mapper-multipath-libs-0.4.9-56.el6_3.1.x86_64
libss-1.41.12-12.el6.x86_64
cloog-ppl-0.15.7-1.2.el6.x86_64
libfprint-0.1.0-19.pre2.el6.x86_64
module-init-tools-3.9-20.0.1.el6.x86_64
desktop-file-utils-0.15-9.el6.x86_64
xorg-x11-utils-7.4-8.el6.x86_64
kbd-1.15-11.el6.x86_64
augeas-libs-0.9.0-4.el6.x86_64
time-1.7-37.1.el6.x86_64
logwatch-7.3.6-49.el6.noarch
plymouth-0.8.3-24.0.1.el6.x86_64
btparser-0.16-3.el6.x86_64
libhugetlbfs-2.12-2.el6.x86_64
python-2.6.6-29.el6_3.3.x86_64
ipa-python-2.2.0-16.el6.x86_64
dbus-1.2.24-7.0.1.el6_3.x86_64
nss-3.13.5-1.0.1.el6_3.x86_64
glibc-headers-2.12-1.80.el6_3.5.x86_64
kernel-uek-2.6.39-200.29.3.el6uek.x86_64
libuser-0.56.13-5.el6.x86_64
foomatic-db-filesystem-4.0-7.20091126.el6.noarch
qpid-tools-0.14-6.el6_3.noarch
perl-ExtUtils-Embed-1.28-127.el6.x86_64
perl-DBD-MySQL-4.013-3.el6.x86_64
iso-codes-3.16-2.el6.noarch
postgresql-server-8.4.13-1.el6_3.x86_64
mesa-libGLU-7.11-5.el6.x86_64
dstat-0.7.0-1.el6.noarch
poppler-utils-0.12.4-3.el6_0.1.x86_64
libX11-common-1.3-2.el6.noarch
fipscheck-lib-1.2.0-7.el6.x86_64
java-1.6.0-openjdk-1.6.0.0-1.49.1.11.4.el6_3.x86_64
pam_krb5-2.3.11-9.el6.x86_64
libcap-2.16-5.5.el6.x86_64
kernel-uek-2.6.39-200.31.1.el6uek.x86_64
polkit-0.96-2.el6_0.1.x86_64
kernel-uek-firmware-2.6.39-200.32.1.el6uek.noarch
setuptool-1.19.9-3.el6.x86_64
popt-1.13-7.el6.x86_64
kernel-uek-2.6.39-200.32.1.el6uek.x86_64
kernel-devel-2.6.32-279.9.1.el6.x86_64
b43-openfwwf-5.2-4.el6.noarch
libacl-2.2.49-6.el6.x86_64
telnet-0.17-47.el6_3.1.x86_64
iwl1000-firmware-39.31.5.1-1.el6.noarch
yum-plugin-security-1.1.30-14.0.1.el6.noarch
readahead-1.5.6-1.el6.x86_64
libldb-0.9.10-23.el6.x86_64
libsepol-2.0.41-4.el6.x86_64
hicolor-icon-theme-0.11-1.1.el6.noarch
shadow-utils-4.1.4.2-13.el6.x86_64
prelink-0.4.6-3.el6.x86_64
ethtool-2.6.33-0.3.el6.x86_64
elfutils-libelf-0.152-1.el6.x86_64
postgresql-odbc-08.04.0200-1.el6.x86_64
iputils-20071127-16.el6.x86_64
sqlite-3.6.20-1.el6.x86_64
mysql-connector-odbc-5.1.5r1144-7.el6.x86_64
findutils-4.4.2-6.el6.x86_64
libcap-ng-0.6.4-3.el6_0.1.x86_64
cyrus-sasl-2.1.23-13.el6.x86_64
ntpdate-4.2.4p8-2.el6.x86_64
nc-1.84-22.el6.x86_64
cronie-anacron-1.4.4-7.el6.x86_64
plymouth-core-libs-0.8.3-24.0.1.el6.x86_64
setserial-2.17-25.el6.x86_64
rfkill-0.3-4.el6.x86_64
lcms-libs-1.19-1.el6.x86_64
ql2100-firmware-1.19.38-3.1.el6.noarch
cyrus-sasl-gssapi-2.1.23-13.el6.x86_64
newt-python-0.52.11-3.el6.x86_64
rt61pci-firmware-1.2-7.el6.noarch
python-iniparse-0.3.1-2.1.el6.noarch
acl-2.2.49-6.el6.x86_64
ipw2100-firmware-1.3-11.el6.noarch
blktrace-1.0.1-6.el6.x86_64
diffutils-2.8.1-28.el6.x86_64
man-pages-3.22-17.el6.noarch
system-config-firewall-base-1.2.27-5.el6.noarch
boost-date-time-1.41.0-11.0.1.el6_1.2.x86_64
yum-metadata-parser-1.1.2-16.el6.x86_64
rpm-libs-4.8.0-27.el6.x86_64
python-nss-0.11-3.el6.x86_64
unixODBC-2.2.14-11.el6.x86_64
libgcc-4.4.6-4.el6.x86_64
gdbm-1.8.0-36.el6.x86_64
libstdc++-4.4.6-4.el6.x86_64
python-dateutil-1.4.1-6.el6.noarch
pcre-7.8-4.el6.x86_64
python-pycurl-7.19.0-8.el6.x86_64
xmlrpc-c-1.16.24-1209.1840.el6.x86_64
python-gudev-147.1-4.el6_0.1.x86_64
libblkid-2.17.2-12.7.el6.x86_64
perl-version-0.77-127.el6.x86_64
perl-Locale-Maketext-Simple-0.18-127.el6.x86_64
perl-IO-Compress-Base-2.020-127.el6.x86_64
abrt-libs-2.0.8-6.0.1.el6.x86_64
perl-Compress-Raw-Zlib-2.020-127.el6.x86_64
libXau-1.0.5-1.el6.x86_64
perl-DBIx-Simple-1.32-3.el6.noarch
binutils-2.20.51.0.2-5.34.el6.x86_64
libXrender-0.9.5-1.el6.x86_64
perl-IO-Compress-Zlib-2.020-127.el6.x86_64
libXcursor-1.1.10-2.el6.x86_64
perl-Log-Message-Simple-0.04-127.el6.x86_64
libXinerama-1.1-1.el6.x86_64
perl-libwww-perl-5.833-2.el6.noarch
libstdc++-devel-4.4.6-4.el6.x86_64
perl-Test-Harness-3.17-127.el6.x86_64
xorg-x11-font-utils-7.2-11.el6.x86_64
libstdc++-4.4.6-4.el6.i686
perl-IPC-Cmd-0.56-127.el6.x86_64
libXv-1.0.5-1.el6.x86_64
elfutils-0.152-1.el6.x86_64
ncurses-static-5.7-3.20090208.el6.x86_64
perl-Module-Loaded-0.02-127.el6.x86_64
gstreamer-tools-0.10.29-1.0.1.el6.x86_64
device-mapper-multipath-0.4.9-56.el6_3.1.x86_64
keyutils-1.4-4.el6.x86_64
iw-0.9.17-4.el6.x86_64
xorg-x11-xauth-1.0.2-7.1.el6.x86_64
coreutils-8.4-19.el6.x86_64
foomatic-4.0.4-1.el6_1.1.x86_64
gcc-4.4.6-4.el6.x86_64
MAKEDEV-3.24-6.el6.x86_64
libdmx-1.1.0-1.el6.x86_64
authconfig-6.1.12-10.el6.x86_64
ksh-20100621-16.el6.x86_64
tar-1.23-7.el6.x86_64
pm-utils-1.2.5-9.el6.x86_64
ed-1.1-3.3.el6.x86_64
iptables-1.4.7-5.1.el6_2.x86_64
hunspell-1.2.8-16.el6.x86_64
nmon-14g-1.el6.rf.x86_64
jasper-libs-1.900.1-15.el6_1.1.x86_64
initscripts-9.03.31-2.0.1.el6_3.1.x86_64
rhn-client-tools-1.0.0-87.0.2.el6.noarch
qpid-cpp-client-0.14-22.0.1.el6_3.x86_64
libipa_hbac-python-1.8.0-32.el6.x86_64
redhat-lsb-graphics-4.0-3.0.1.el6.x86_64
less-436-10.el6.x86_64
postgresql-8.4.13-1.el6_3.x86_64
cracklib-dicts-2.8.16-4.el6.x86_64
logrotate-3.7.8-15.el6.x86_64
fontconfig-2.8.0-3.el6.x86_64
qpid-cpp-server-0.14-22.0.1.el6_3.x86_64
openldap-2.4.23-26.el6_3.2.x86_64
kernel-uek-firmware-2.6.39-200.29.3.el6uek.noarch
perl-CPANPLUS-0.88-127.el6.x86_64
upstart-0.6.5-12.el6.x86_64
saslwrapper-0.14-1.el6.x86_64
net-tools-1.60-110.el6_2.x86_64
device-mapper-event-libs-1.02.74-10.el6.x86_64
openssh-5.3p1-81.el6.x86_64
matahari-consoles-0.6.0-14.el6.x86_64
matahari-python-0.6.0-14.el6.x86_64
dmraid-events-1.0.0.rc16-11.el6.x86_64
tuned-0.2.19-7.el6.noarch
certmonger-0.56-1.el6.x86_64
libreport-plugin-reportuploader-2.0.9-5.0.1.el6.x86_64
abrt-addon-python-2.0.8-6.0.1.el6.x86_64
libreport-plugin-kerneloops-2.0.9-5.0.1.el6.x86_64
libpath_utils-0.2.1-9.el6.x86_64
gtk2-2.18.9-10.el6.x86_64
vim-common-7.2.411-1.8.el6.x86_64
setup-2.8.14-16.el6.noarch
latencytop-0.5-9.el6.x86_64
autofs-5.0.5-54.el6.x86_64
ipa-client-2.2.0-16.el6.x86_64
abrt-cli-2.0.8-6.0.1.el6.x86_64
lvm2-2.02.95-10.el6.x86_64
openssh-clients-5.3p1-81.el6.x86_64
microcode_ctl-1.17-11.el6.x86_64
libcgroup-0.37-4.el6.x86_64
e2fsprogs-1.41.12-12.el6.x86_64
python-psycopg2-2.0.14-1.el6_2.1.x86_64
rhn-setup-1.0.0-87.0.2.el6.noarch
sos-2.2-29.0.1.el6.noarch
psacct-6.3.2-63.el6_3.3.x86_64
cifs-utils-4.8.1-10.el6.x86_64
perl-CGI-3.51-127.el6.x86_64
libicu-4.2.1-9.1.el6_2.x86_64
mcelog-1.0pre3_20110718-0.14.el6.x86_64
ltrace-0.5-23.45svn.el6.x86_64
efibootmgr-0.5.4-10.el6.x86_64
libvorbis-1.2.3-4.el6_2.1.x86_64
ql2500-firmware-5.06.05-1.el6.noarch
curl-7.19.7-26.el6_2.4.x86_64
selinux-policy-targeted-3.7.19-155.0.1.el6_3.4.noarch
jpackage-utils-1.7.5-3.12.el6.noarch
perl-IO-Compress-Bzip2-2.020-127.el6.x86_64
filesystem-2.4.30-3.el6.x86_64
qpid-cpp-server-ssl-0.14-22.0.1.el6_3.x86_64
pciutils-3.1.4-11.el6.x86_64
xml-common-0.6.3-32.el6.noarch
ghostscript-8.70-14.el6_3.1.x86_64
urw-fonts-2.4-10.el6.noarch
iotop-0.3.2-3.el6.noarch
mailcap-2.1.31-2.el6.noarch
libxslt-1.1.26-2.0.2.el6_3.1.x86_64
wget-1.12-1.4.el6.x86_64
nss-softokn-freebl-3.12.9-11.el6.x86_64
openjpeg-libs-1.3-9.el6_3.x86_64
fipscheck-1.2.0-7.el6.x86_64
libattr-2.4.44-7.el6.x86_64
kernel-uek-firmware-2.6.39-200.31.1.el6uek.noarch
info-4.13a-8.el6.x86_64
bind-libs-9.8.2-0.10.rc1.el6_3.4.x86_64
ConsoleKit-0.4.1-3.el6.x86_64
systemtap-runtime-1.7-5.0.1.el6_3.1.x86_64
iwl6000g2b-firmware-17.168.5.2-1.el6.noarch
kernel-uek-headers-2.6.32-300.32.3.el6uek.x86_64
iwl6050-firmware-41.28.5.1-2.el6.noarch
perf-2.6.32-279.9.1.el6.x86_64
gnupg2-2.0.14-4.el6.x86_64
iwl6000-firmware-9.221.4.1-1.el6.noarch
yum-utils-1.1.30-14.0.1.el6.noarch
bzip2-libs-1.0.5-7.el6_0.x86_64
nss_compat_ossl-0.9.6-1.el6.x86_64
gamin-0.1.10-9.el6.x86_64
jline-0.9.94-0.8.el6.noarch
virt-what-1.11-1.1.el6.x86_64
dbus-glib-0.86-5.el6.x86_64
libSM-1.1.0-7.1.el6.x86_64
sigar-1.6.5-0.4.git58097d9.el6.x86_64
pam_passwdqc-1.0.5-6.el6.x86_64
hunspell-en-0.20090216-7.1.el6.noarch
libogg-1.1.4-2.1.el6.x86_64
postfix-2.6.6-2.2.el6_1.x86_64
libgpg-error-1.7-4.el6.x86_64
libtdb-1.2.1-3.el6.x86_64
ntp-4.2.4p8-2.el6.x86_64
mlocate-0.22.2-3.el6.x86_64
cronie-1.4.4-7.el6.x86_64
cyrus-sasl-plain-2.1.23-13.el6.x86_64
pkgconfig-0.23-9.1.el6.x86_64
oddjob-0.30-5.el6.x86_64
libtevent-0.9.8-8.el6.x86_64
hdparm-9.16-3.4.el6.x86_64
traceroute-2.0.14-2.el6.x86_64
gpm-libs-1.20.6-12.el6.x86_64
dosfstools-3.0.9-4.el6.x86_64
eject-2.1.5-17.el6.x86_64
sysvinit-tools-2.87-4.dsf.el6.x86_64
iwl5000-firmware-8.83.5.1_1-1.el6_1.1.noarch
elfutils-libs-0.152-1.el6.x86_64
iwl4965-firmware-228.61.2.24-2.1.el6.noarch
pyOpenSSL-0.10-2.el6.x86_64
rt73usb-firmware-1.8-7.el6.noarch
boost-thread-1.41.0-11.0.1.el6_1.2.x86_64
python-ldap-2.3.10-1.el6.x86_64
gpg-pubkey-ec551f03-4c2d256a
libfontenc-1.0.5-2.el6.x86_64
pygpgme-0.1-18.20090824bzr68.el6.x86_64
libtool-ltdl-2.2.6-15.5.el6.x86_64
python-lxml-2.2.3-1.1.el6.x86_64
mc-4.7.0.2-3.el6.x86_64
newt-0.52.11-3.el6.x86_64
glib2-2.22.5-7.el6.x86_64
nss-util-3.13.5-1.el6_3.x86_64
pytz-2010h-2.el6.noarch
python-urlgrabber-3.9.1-8.el6.noarch
readline-6.0-4.el6.x86_64
perl-Module-Pluggable-3.90-127.el6.x86_64
boost-python-1.41.0-11.0.1.el6_1.2.x86_64
perl-5.10.1-127.el6.x86_64
libpng-1.2.49-1.el6_2.x86_64
perl-URI-1.40-2.el6.noarch
perl-Log-Message-0.02-127.el6.x86_64
perl-Package-Constants-0.02-127.el6.x86_64
libxcb-1.5-1.el6.x86_64
cpio-2.10-10.el6.x86_64
cairo-1.8.8-3.1.el6.x86_64
libipa_hbac-1.8.0-32.el6.x86_64
libXtst-1.0.99.2-3.el6.x86_64
perl-Archive-Tar-1.58-127.el6.x86_64
perl-HTML-Parser-3.64-2.el6.x86_64
libXdamage-1.1.2-1.el6.x86_64
perl-Module-CoreList-2.18-127.el6.x86_64
libgcc-4.4.6-4.el6.i686
libXfont-1.4.1-2.el6_1.x86_64
libXcomposite-0.4.1-2.el6.x86_64
perl-ExtUtils-ParseXS-2.2003.0-127.el6.x86_64
giflib-4.1.6-3.1.el6.x86_64
perl-ExtUtils-CBuilder-0.27-127.el6.x86_64
ncurses-term-5.7-3.20090208.el6.x86_64
tmpwatch-2.9.16-4.el6.x86_64
grubby-7.0.15-3.0.1.el6.x86_64
oracleasm-support-2.1.5-1.el6.x86_64
coreutils-libs-8.4-19.el6.x86_64
cpp-4.4.6-4.el6.x86_64
hal-libs-0.5.14-11.el6.x86_64
redhat-lsb-printing-4.0-3.0.1.el6.x86_64
gcc-c++-4.4.6-4.el6.x86_64
libutempter-1.1.5-4.1.el6.x86_64
liboil-0.3.16-4.1.el6.x86_64
hwdata-0.233-7.8.el6.noarch
libaio-devel-0.3.107-10.el6.x86_64
boost-iostreams-1.41.0-11.0.1.el6_1.2.x86_64
libssh2-1.2.2-11.el6_3.x86_64
compat-libcap1-1.10-1.x86_64
hal-info-20090716-3.1.el6.noarch
vim-minimal-7.2.411-1.8.el6.x86_64
perl-YAML-Syck-1.07-4.el6.x86_64
libcollection-0.6.0-9.el6.x86_64
glibc-2.12-1.80.el6_3.5.x86_64
boost-serialization-1.41.0-11.0.1.el6_1.2.x86_64
oraclelinux-release-6Server-3.0.2.x86_64
openssl-1.0.0-25.el6_3.1.x86_64
dejavu-sans-fonts-2.30-2.el6.noarch
qt-sqlite-4.6.2-24.el6.x86_64
libxml2-2.7.6-8.0.1.el6_3.3.x86_64
groff-1.18.1.4-21.el6.x86_64
ql23xx-firmware-3.03.27-3.1.el6.noarch
cups-libs-1.4.2-48.el6_3.1.x86_64
cracklib-2.8.16-4.el6.x86_64
pcmciautils-015-4.2.el6.x86_64
man-1.6f-30.el6.x86_64
qpid-cpp-client-ssl-0.14-22.0.1.el6_3.x86_64
nss-tools-3.13.5-1.0.1.el6_3.x86_64
alsa-lib-1.0.22-3.el6.x86_64
hwloc-1.1-0.1.el6.x86_64
perl-Test-Simple-0.92-127.el6.x86_64
phonon-backend-gstreamer-4.6.2-24.el6.x86_64
perl-Time-Piece-1.15-127.el6.x86_64
fprintd-0.1-20.git04fd09cfa.el6.x86_64
python-saslwrapper-0.14-1.el6.x86_64
device-mapper-event-1.02.74-10.el6.x86_64
matahari-agent-lib-0.6.0-14.el6.x86_64
matahari-sysconfig-0.6.0-14.el6.x86_64
matahari-rpc-0.6.0-14.el6.x86_64
dmraid-1.0.0.rc16-11.el6.x86_64
matahari-host-0.6.0-14.el6.x86_64
portreserve-0.0.4-9.el6.x86_64
libreport-2.0.9-5.0.1.el6.x86_64
libreport-plugin-mailx-2.0.9-5.0.1.el6.x86_64
abrt-addon-kerneloops-2.0.8-6.0.1.el6.x86_64
libtasn1-2.3-3.el6_2.1.x86_64
libref_array-0.1.1-9.el6.x86_64
file-libs-5.04-13.el6.x86_64
c-ares-1.7.0-6.el6.x86_64
rpcbind-0.2.0-9.el6.x86_64
busybox-1.15.1-15.el6.x86_64
dhclient-4.1.1-31.P1.0.1.el6_3.1.x86_64
vim-enhanced-7.2.411-1.8.el6.x86_64
samba-client-3.5.10-125.el6.x86_64
openssh-server-5.3p1-81.el6.x86_64
rsyslog-5.8.10-2.el6.x86_64
rng-tools-2-13.el6_2.x86_64
fprintd-pam-0.1-20.git04fd09cfa.el6.x86_64
sudo-1.7.4p5-13.el6_3.x86_64
rhn-check-1.0.0-87.0.2.el6.noarch
m2crypto-0.20.2-9.el6.x86_64
gdb-7.2-56.el6.x86_64
audit-2.2-2.el6.x86_64
oprofile-0.9.7-1.el6.x86_64
valgrind-3.6.0-5.el6.x86_64
irqbalance-0.55-35.0.1.el6_3.x86_64
alsa-utils-1.0.22-3.el6.x86_64
dmidecode-2.11-2.el6_1.x86_64
libgomp-4.4.6-4.el6.x86_64
oraclelinux-release-notes-6Server-7.x86_64
xmlrpc-c-client-1.16.24-1209.1840.el6.x86_64
selinux-policy-3.7.19-155.0.1.el6_3.4.noarch
cas-0.15-1.el6.1.noarch
ca-certificates-2010.63-3.el6_1.5.noarch
perl-CPAN-1.9402-127.el6.x86_64
libsndfile-1.0.20-5.el6.x86_64
cups-1.4.2-48.el6_3.1.x86_64
MySQL-python-1.2.3-0.3.c1.1.el6.x86_64
dejavu-fonts-common-2.30-2.el6.noarch
qt-x11-4.6.2-24.el6.x86_64
krb5-workstation-1.9-33.el6_3.3.x86_64
pulseaudio-libs-0.9.21-14.el6_3.x86_64
dracut-kernel-004-284.0.1.el6_3.1.noarch
util-linux-ng-2.17.2-12.7.el6.x86_64
tzdata-java-2012f-1.el6.noarch
iwl100-firmware-39.31.5.1-1.el6.noarch
kpartx-0.4.9-56.el6_3.1.x86_64
mailx-12.4-6.el6.x86_64
yum-3.2.29-40.0.1.el6.noarch
acpid-1.0.10-2.1.el6.x86_64
cyrus-sasl-lib-2.1.23-13.el6.x86_64
hesiod-3.1.0-19.el6.x86_64
usbutils-003-4.el6.x86_64
tcp_wrappers-libs-7.6-57.el6.x86_64
mdadm-3.2.3-9.el6.x86_64
xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64
abrt-2.0.8-6.0.1.el6.x86_64
libnl-1.1-14.el6.x86_64
abrt-tui-2.0.8-6.0.1.el6.x86_64
unzip-6.0-1.el6.x86_64
pciutils-libs-3.1.4-11.el6.x86_64
libini_config-0.6.1-9.el6.x86_64
powertop-1.11-6.el6.x86_64
psmisc-22.6-15.el6_0.1.x86_64
sssd-1.8.0-32.el6.x86_64
pixman-0.18.4-1.el6_0.1.x86_64
bridge-utils-1.2-9.el6.x86_64
boost-filesystem-1.41.0-11.0.1.el6_1.2.x86_64
dhcp-common-4.1.1-31.P1.0.1.el6_3.1.x86_64
ustr-1.0.4-9.1.el6.x86_64
xz-4.999.9-0.3.beta.20091007git.el6.x86_64
nfs-utils-1.2.3-26.el6.x86_64
zd1211-firmware-1.4-4.el6.noarch
checkpolicy-2.0.22-1.el6.x86_64
matahari-0.6.0-14.el6.x86_64
rhnlib-2.5.22-12.0.2.el6.noarch
rootfiles-8.1-6.1.el6.noarch
libusb-0.1.12-23.el6.x86_64
parted-2.1-18.el6.x86_64
gettext-0.17-16.el6.x86_64
pth-2.0.7-9.3.el6.x86_64
system-config-network-tui-1.6.0.el6.2-1.0.3.el6.noarch
python-netaddr-0.7.5-4.el6.noarch
bash-4.1.2-9.el6_2.x86_64
man-pages-overrides-6.3.3-1.el6.noarch
nspr-4.9.1-2.el6_3.x86_64
grub-0.97-77.0.1.el6.x86_64
python-crypto-2.0.1-22.el6.x86_64
sed-4.2.1-10.el6.x86_64
sysstat-9.0.4-20.el6.x86_64
rhnsd-4.9.3-2.0.1.el6.x86_64
perl-Pod-Escapes-1.04-127.el6.x86_64
numactl-2.0.7-3.el6.x86_64
boost-1.41.0-11.0.1.el6_1.2.x86_64
libudev-147-2.42.el6.x86_64
crash-trace-command-1.0-4.el6.x86_64
libX11-1.3-2.el6.x86_64
matahari-core-0.6.0-14.el6.x86_64
ql2400-firmware-5.06.05-1.el6.noarch
libXrandr-1.3.0-4.el6.x86_64
perl-Object-Accessor-0.34-127.el6.x86_64
perl-libxml-perl-0.08-10.el6.noarch
nss-softokn-freebl-3.12.9-11.el6.i686
pycairo-1.8.6-2.1.el6.x86_64
perl-File-Fetch-0.26-127.el6.x86_64
ncurses-libs-5.7-3.20090208.el6.i686
gmp-4.3.1-7.el6_2.2.x86_64
flac-1.2.1-6.1.el6.x86_64
ppl-0.10.2-11.el6.x86_64
python-matplotlib-0.99.1.2-1.el6.x86_64
qt-4.6.2-24.el6.x86_64
patch-2.6-6.el6.x86_64
libXxf86dga-1.1.1-1.el6.x86_64
kbd-misc-1.15-11.el6.noarch
procps-3.2.8-23.el6.x86_64
perl-Date-Manip-6.24-1.el6.noarch
libdrm-2.4.25-2.el6.x86_64
libgfortran-4.4.6-4.el6.x86_64
python-libs-2.6.6-29.el6_3.3.x86_64
python-krbV-1.0.90-3.el6.x86_64
gzip-1.3.12-18.el6.x86_64
dbus-libs-1.2.24-7.0.1.el6_3.x86_64
nss-sysinit-3.13.5-1.0.1.el6_3.x86_64
samba-winbind-clients-3.5.10-125.el6.x86_64
glibc-devel-2.12-1.80.el6_3.5.x86_64
plymouth-scripts-0.8.3-24.0.1.el6.x86_64
basesystem-10.0-4.0.1.el6.noarch
mesa-libGL-7.11-5.el6.x86_64
postgresql-docs-8.4.13-1.el6_3.x86_64
poppler-0.12.4-3.el6_0.1.x86_64
ncurses-base-5.7-3.20090208.el6.x86_64
perl-parent-0.221-127.el6.x86_64
kernel-devel-2.6.32-279.5.2.el6.x86_64
oddjob-mkhomedir-0.30-5.el6.x86_64
zlib-1.2.3-27.el6.x86_64
libselinux-utils-2.0.94-5.3.el6.x86_64
kernel-firmware-2.6.32-279.9.1.el6.noarch
device-mapper-libs-1.02.74-10.el6.x86_64
tzdata-2012f-1.el6.noarch
iwl6000g2a-firmware-17.168.5.3-1.el6.noarch
libjpeg-6b-46.el6.x86_64
policycoreutils-2.0.83-19.24.0.1.el6.x86_64
yum-rhn-plugin-0.9.1-43.0.1.el6.noarch
gpgme-1.1.8-3.el6.x86_64
matahari-service-0.6.0-14.el6.x86_64
libaio-0.3.107-10.el6.x86_64
pinfo-0.6.9-12.el6.x86_64
libtalloc-2.0.1-1.1.el6.x86_64
cryptsetup-luks-libs-1.2.0-7.el6.x86_64
boost-program-options-1.41.0-11.0.1.el6_1.2.x86_64
libreport-python-2.0.9-5.0.1.el6.x86_64
perl-XML-Grove-0.46alpha-40.el6.noarch
which-2.19-6.el6.x86_64
libreport-cli-2.0.9-5.0.1.el6.x86_64
wireless-tools-29-5.1.1.el6.x86_64
bzip2-1.0.5-7.el6_0.x86_64
ypbind-1.20.4-29.el6.x86_64
nano-2.0.9-7.el6.x86_64
libgssglue-0.1-11.el6.x86_64
vconfig-1.9-8.1.el6.x86_64
kernel-2.6.32-279.5.1.el6.x86_64
b43-fwcutter-012-2.2.el6.x86_64
libmng-1.0.10-4.1.el6.x86_64
libffi-3.0.5-3.2.el6.x86_64
ivtv-firmware-20080701-20.2.noarch
python-ethtool-0.6-1.el6.x86_64
iwl3945-firmware-15.32.2.9-4.el6.noarch
bc-1.06.95-1.el6.x86_64
words-3.0-17.el6.noarch
mysql-server-5.1.61-4.el6.x86_64
python-kerberos-1.1-6.2.el6.x86_64
rpm-4.8.0-27.el6.x86_64
libpcap-1.0.0-6.20091201git117cb5.el6.x86_64
passwd-0.77-4.el6_2.2.x86_64
chkconfig-1.3.49.3-2.el6.x86_64
cvs-1.11.23-11.el6_2.1.x86_64
libuuid-2.17.2-12.7.el6.x86_64
perl-DBI-1.609-4.el6.x86_64
at-3.1.10-43.el6_2.1.x86_64
pygobject2-2.20.0-5.el6.x86_64
gawk-3.1.7-9.el6.x86_64
libgudev1-147-2.42.el6.x86_64
python-nose-0.10.4-3.1.el6.noarch
perl-Pod-Simple-3.13-127.el6.x86_64
ntsysv-1.3.49.3-2.el6.x86_64
perl-Module-Load-0.16-127.el6.x86_64
trace-cmd-1.0.5-7.el6.x86_64
theora-tools-1.1.0-2.el6.x86_64
libtiff-3.9.4-6.el6_3.x86_64
perl-DBD-SQLite-1.27-3.el6.x86_64
nfs4-acl-tools-0.3.3-6.el6.x86_64
libXfixes-4.0.4-1.el6.x86_64
perl-Compress-Zlib-2.020-127.el6.x86_64
kernel-devel-2.6.32-279.5.1.el6.x86_64
qt3-3.3.8b-30.el6.x86_64
perl-ExtUtils-MakeMaker-6.55-127.el6.x86_64
boost-graph-1.41.0-11.0.1.el6_1.2.x86_64
ncurses-devel-5.7-3.20090208.el6.x86_64
pango-1.28.1-3.el6_0.5.x86_64
perl-Digest-SHA-5.47-127.el6.x86_64
gstreamer-0.10.29-1.0.1.el6.x86_64
libXmu-1.0.5-1.el6.x86_64
foomatic-db-4.0-7.20091126.el6.noarch
pam-1.1.1-10.el6_2.1.x86_64
tcp_wrappers-7.6-57.el6.x86_64
compat-libstdc++-33-3.2.3-69.el6.x86_64
gstreamer-plugins-base-0.10.29-1.el6.x86_64
pinentry-0.7.6-6.el6.x86_64
elfutils-libelf-devel-0.152-1.el6.x86_64
iproute-2.6.32-20.el6.x86_64
boost-signals-1.41.0-11.0.1.el6_1.2.x86_64
krb5-libs-1.9-33.el6_3.3.x86_64
atlas-3.8.4-2.el6.x86_64
cdparanoia-libs-10.2-5.1.el6.x86_64
postgresql-libs-8.4.13-1.el6_3.x86_64
redhat-lsb-4.0-3.0.1.el6.x86_64
sssd-client-1.8.0-32.el6.x86_64
python-qpid-qmf-0.14-14.0.1.el6_3.x86_64
seekwatcher-0.12-5.el6.noarch
libcurl-7.19.7-26.el6_2.4.x86_64
I want to upgrade my OS from official repository on Primary and Standby Servers. And I have a question:
Will I have a problem with my RDBMS after upgrade OS (e.g. statuses in dba_registry will become INVALID)?It's Ok.
Now I have:
$ cat /etc/issue
Oracle Linux Server release 6.4
No any problem. -
Hi,
Webtier Utilities 11.1.1.2 failed to install on Oracle Linux OEL 5.7 x86_64 (Linux vilje05 2.6.18-274.3.1.0.1.el5 #1 SMP Wed Sep 7 06:02:50 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux):
[oracle@vilje05 ~]$ cd install/Disk1/
[oracle@vilje05 Disk1]$ ./runInstaller -silent -response /home2/oracle/my_response.txt -invPtrLoc /home2/oracle/orainv.loc
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 5192 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2000 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-10-19_03-27-57PM. Please wait ...[oracle@vilje05 Disk1]$ Lo
g: /home2/oracle/oraInventory/logs/install2011-10-19_03-27-57PM.log
Copyright (c) 1999, 2009, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Expected result: One of enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10
Actual Result: enterprise-5
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-14.el5-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-i386. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-51.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-51.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-65-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-65-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-65-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-65-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-65-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-51.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-51.el5-i386. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-51.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-51.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-51.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-51.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-11.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Packages Check: Success.
Checking for VERSION=2.6.18; found VERSION=2.6.18-274.3.1.0.1.el5. Passed
Checking for hardnofiles=4096; found hardnofiles=16384. Passed
Checking for softnofiles=4096; found softnofiles=16384. Passed
Check complete. The overall result of this check is: Passed
Kernel Check: Success.
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-65
Check complete. The overall result of this check is: Passed
GLIBC Check: Success.
Expected result: 1024MB
Actual Result: 11732MB
Check complete. The overall result of this check is: Passed
TotalMemory Check: Success.
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Check Env Variable Check: Success.
Verifying data......
Copying Files...
-----------20%----------40%----------60%----------80%--------100%
Applying Oneoff Patch...
[CONFIG] Launching Config Actions....
Started Configuration:Web Tier Configuration
[CONFIG]:Create and Start AS Instance (instance1)
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Creating Oracle Instance directories...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Recording OPMN ports reservations...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Bootstrapping OPMN configuration files...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Instantiating opmnctl for direct usage...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Skipping instance registration
[CONFIG] SUCCESS:Create and Start AS Instance (instance1)
[CONFIG]:Create and Start OHS Component (ohs1)
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Provisioning OHS files for ohs1
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Copying OHS files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Customizing httpd.conf
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Skipping ohs1 component registration.
[CONFIG] FAILED:Create and Start OHS Component (ohs1)
Question Received:Failed to Start OHS Component
[CONFIG] [Web Tier Configuration]:Failed to Start OHS Component
[CONFIG] FAILED:Create and Start OHS Component (ohs1)
Configuration:Web Tier Configuration failed
Error while running Configuration.
The installation of Oracle AS Common Toplevel Component, Oracle WebTier and Utilities CD failed.
[oracle@vilje05 Disk1]$
[oracle@vilje05 ~]$ opmnctl stopall
XML parser init: error 54.
opmnctl stopall: error parsing /home2/oracle/bea_default/Oracle_WT1/instances/instance1/config/OPMN/opmn/opmn.xml
===
$ cat my_response.txt
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
#Set this to true if installation and configuration need to be done, all other required variables need to be provided. Variable "INSTALL AND CONFIGURE LATER TYPE" must be set to false if this is set to true as the variables are mutually exclusive
INSTALL AND CONFIGURE TYPE=true
#Set this to true if only Software only installation need to be done. If this is set to true then variable "INSTALL AND CONFIGURE TYPE" must be set to false, since the variables are mutually exclusive.
INSTALL AND CONFIGURE LATER TYPE=false
#Provide the Oracle Home location. The location has to be the immediate child under the specified Middleware Home location. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. The total length has to be less than or equal to 128 characters. The location has to be an empty directory or a valid SOA Oracle Home.
ORACLE_HOME=/home2/oracle/bea_default/Oracle_WT1
#Provide existing Middleware Home location.
MIDDLEWARE_HOME=/home2/oracle/bea_default
#The name of the Oracle Instance. Instance name must begin with an alphabetic character, may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters and are 4 to 30 characters long.
INSTANCE_HOME=/home2/oracle/bea_default/Oracle_WT1/instances/instance1
#Provide the Oracle Instance location. The Oracle Instance directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. The total length has to be less than or equal to 128 characters. The location has to be an empty or non existing directory.
INSTANCE_NAME=instance1
#If set to true, installer will auto assign ports
AUTOMATIC_PORT_DETECT=true
#This is required if "AUTOMATIC_PORT_DETECT" variable is set to false, absolute path of a staticports file location need to be provided with values for ports.\nThe template for staticports.ini can be found from Disk1/staget/Response directory of the shiphome.
STATICPORT INI FILE LOCATION=
#Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name.
MYORACLESUPPORT_USERNAME=
#Provide the My Oracle Support Password
MYORACLESUPPORT_PASSWORD=<SECURE VALUE>
#Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration
DECLINE_SECURITY_UPDATES=true
#Set this to true if My Oracle Support Password is specified
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#Provide the Proxy Host
PROXY_HOST=
#Provide the Proxy Port
PROXY_PORT=
#Provide the Proxy Username
PROXY_USER=
#Provide the Proxy Password
PROXY_PWD=<SECURE VALUE>
[SYSTEM]
#Set true to configure Oracle HTTP Server, else skip Oracle HTTP Server configuration
CONFIGURE_OHS=true
#Set true to configure Oracle Web Cache, else skip Oracle Web Cache configuration
CONFIGURE_WEBCACHE=false
#The Oracle HTTP Server (OHS) component name (required only if CONFIGURE_OHS is set to true). OHS component name must begin with an alphabetic character, may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters and are 4 to 30 characters long.
OHS_COMPONENT_NAME=ohs1
[APPLICATIONS]
[RELATIONSHIPS]
#If set to true, the instance and components will be registered with an existing weblogic server
ASSOCIATE_WEBTIER_WITH_DOMAIN=false
==
as you see all checks passed OK, but the whole install failed. What could be wrong? And what is XML parser init: error 54?
Edited by: 892273 on Oct 19, 2011 8:12 AMWhere's the WebLogic Server home???
Else you should attach this to an existing WebLogic domain
kind regards
Michel
Edited by: Michel Schildmeijer on 20-okt-2011 15:57 -
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers. -
I am trying to install weblogic server 10.3.6 on Oracle linux 5.8 (64-bit) platform. While creating domain , it does not take any input in password & conform password fields on "configure administrator username and password page". The field remains blank. I am stuck at this point and not able to create domain. The same issue is with weblogic 10.3.5 server. The java i used is jdk1.7 update 3 and jdk 1.6 update 27. In Both the cases i am not to create domain.
Can anyone of you tell me if weblogic 10.3.6 is supported on Oracle linux 5.8 platform. If it is supported any idea how to resolve this issue?
Thanks in advance,
PadmaYes. Please refer
System Requirements and Supported Platforms for Oracle WebLogic Server 10.3 ( xls)
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html -
Installing RAC on Oracle Linux 6.3 using VMWare ESX
Hi
I have configured a pair of Linux servers following a guide on Oracle-base.
Both servers have their own OS disks and they have four virtual disks that are shared between the two vm's (configured as sharable in VMWare using a separate SCSI controller to the OS disks etc.
The /u01/app/11.2.0.3/grid/root.sh script is failing at what appears to be the part where the daemons are added to the inittab the error i get is :
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start at /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl line 443.
I have found a few notes of the Internet suggesting disabling IPv6 (It's already disabled)
Restarting syslog
and removing some file in varoius tmp dirs (there were none)
But i'm getting the feeling the issue is with the shared disk config.
Can anyone point me to log files etc so i can troubleshoot this further?I guys I have run into same problem. Is there a solution for this or not.
OS: OEL 6.3 x86_64
ASM 2.0
Grid Infra: 11.2.0.1
root.sh script fails saying:
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/oracle/product/11.2.0/grid/crs/install/roothas.pl line 296.
Maybe you are looking for
-
I downloaded the latest version of itunes and it crashed my computer
I have a Dell Inspiron 530 with Windows 7 professional, my computer was working just fine. I tried to update my iTunes to version 12.1.1, everything was fine until it prompted me to restart my computer. When my computer rebooted, it only boots to the
-
How can I reinsert the deleted audio from clips in my sequence?
How can I reinsert the deleted audio from clips in my sequence?
-
How to insert multiple rows in oracle forms when using TEMPLATE FORM
I got a case study on PO creation nd in that I have to insert multiple rows in form especally when PO creation screen is there. I tried by different syntaxes but its not working.I need correct syntax to insert the multiple rows in to the table in ora
-
Pdf's: Blurry when compressed
When I make a pdf (usually using Preview), it makes a large file size. (For example, if it's 5 document pages, it might be 3MB; if it's 5 photos, it might be 20MB.) When I use the Quartz Filter to compress the pdf, the result is too blurry to read th
-
Hello, I want to create my own keyboard layout. I know how to do this with xmodmap and doing it through XKB doesn't seem hard either, but I'm looking for something a tad more advanced. I want to create extra modes (like caps-lock) and submaps, which