Configuring an Integration Process

Hi All,
Are there any good articles or weblogs explaining how to configure an integration process in the integration directory? I have an integration process which implements a sync-async bridge.
Thanks,
Sandeep

Hi Sandeep,
check this links, it should help you.
This would help you with confgiguring BPM,
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
This gives you info on SYNC-ASYNC Bridge, /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
cheers,
venk!

Similar Messages

Dynamic configuration in integration process using abap mapping

Hi everybody,
i have the following scenario:
file adapter -> integration process -> file adapter
The integration process uses an ABAP mapping and sets the filename in dynamic configuration as follows:
*-- Set Parameter
 clear ls_dyn_record.
 ls_dyn_record-name = gc_dyn_config_name.
 ls_dyn_record-namespace = gc_dyn_config_ns.
 ls_dyn_record-value = <new_file_name>
*-- Write configuration
 ir_dyn_config->add_record( ls_dyn_record ).
But now the new filename is not reflected in the file adapter (receiver). In the integration monitor (SXMB_MONI) i still find the old filename.
Whats wrong?
Elko

The ABAP mapping is more complex, setting filename in Dyn. Conf. is just one step in mapping.
If I check the Workflow protocol of the Integration Process, I find the following in the Trace of the ABAP-Mapping:
The filename has been set to 3233340.SWNF00HW.P10I. The Suffix P10I has been added in the ABAP mapping.
When I check the subsequent message in SXMB_MONI I find:
The added suffix is missing in the filename !!
Elko

Configuration Example Integration Process

Hello,
does anybody know where to find any documentations concerning the configuration (not design!) of processes where a Integration Process is involved. In other words: how do abstract and in-/outbound interfaces work togehter and in wich sequence are they called, and so on.
Regards
Gunnar

lets take an example;
File A -> BPM -> File B (BPM will have transformation of file A to file B)
the MI involved will be;
For File A - 1 o/b and 1 abs. interface
For File B - 1 abs & 1 i/b interface
In this case in configuration;
1 Sender agreement - File A & o/b interface
1 Receiver agreement - BPM, FILE B and i/b interface
1 Recv. Agreement - File A, o/b interface to BPM and its corresponding interface determination
1 Recv. Agreement - BPM, I/b interface, to target sys of File B and its corresponding interface det.
Is this wht you were looking for ? Do get back in case u need more clarification.

Send IDoc to R3 in Integration Process

Hello everyone,
I want to send some idocs to R3 system's vender from XI Integration Process, but i do not how how to configure in the adapter-specific identifiers. If i set the Idoc Adapter Logical System, the idoc went to the logical system, if i did not set the logic system, it raise an error "Unable to convert sender service BS_SAP_R3 to an ALE logical system". So how can i configure the Integration Process in Integration Directory to send idocs to R3 system's vender?
Regards,
Nick

Hi Nick,
Look at these threads please..
Configuring to receive a iDoc in R/3 sent by XI
How To use External Message To Send IDOC From XI To R/3
Hope these help you!
cheers,
Prashanth

Adapter Specific Paramters for Integration Process in Configuration

I want to send the data from flat file to idoc through BPM
While doing configuration do I need to explicitly give Adapter specific parameters(Logical System Name) for BPM(Integration Process) or not?
Is it mandatory to give Adapter Specific Parameters for this scenario?
FILE-->BPM--->IDOC(R/3)
Thanks & Regards
Katta Mohan Reddy

Hi,
why would you require Adapter specific parameters (I assume you mean Adapter specific Attributes) - Logical System should be there through the routing (Receiver Determination). What exactly do you want to accomplish by that?
regards,
Peter

Integration process in configuration is in Error

Hi all,
 I am doing an SOAP to RFC scenario using BPM on PI7.1 . When I am importing the BPM into Configuration it is not showing me interfaces in the sender and receiver interfaces of Integration process. In transaction SXI_CACHE I am not able to see my integration process in Cache I checked Cache Status in integration directory there in ChangeListView tab everything is green but in Problem and ObjectView tabs my integration process is in error. Error's short description displays there is Serialization error.
Detailed error shown
Thrown:
com.sap.aii.ibdir.server.serialization.cpa.ProcessRefreshException: Serialization error
 at com.sap.aii.ibdir.server.serialization.cpa.HmiProcessCacheRefreshClient.call(HmiProcessCacheRefreshClient.java:85)
 at com.sap.aii.ibdir.server.serialization.cpa.InternalSerializationServiceService.serializeForCache(InternalSerializationServiceService.java:281)
 at com.sap.aii.ibdir.server.abapcache.content.CacheCPA.addContent(CacheCPA.java:594)
 at com.sap.aii.ibdir.server.abapcache.content.CacheCPA.addContent(CacheCPA.java:208)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:599)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:487)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:222)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:149)
 at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.setXmlDataAndBufferSize(CacheRefreshSession.java:123)
 at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.<init>(CacheRefreshSession.java:40)
 at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.getInstance(CacheRefreshSession.java:54)
 at com.sap.aii.ibdir.web.abapcache.CacheRefreshServlet.doGet(CacheRefreshServlet.java:47)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
 at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:163)
 at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:82)
 at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124)
 at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:74)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:425)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
 at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
 at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
 at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
 at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
 at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
 at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: com.sap.aii.utilxi.hmi.api.HmiMethodFault: Serialization error
 at com.sap.aii.utilxi.hmi.api.HmiMethodFault.parseGdi(HmiMethodFault.java:156)
 at com.sap.aii.utilxi.hmi.core.msg.HmiResponse.setState(HmiResponse.java:181)
 at com.sap.aii.utilxi.hmi.core.msg.HmiResponse.parseGdi(HmiResponse.java:132)
 at com.sap.aii.utilxi.hmi.api.HmiHttpJDKClient.sendRequestAndReceiveResponse(HmiHttpJDKClient.java:256)
 at com.sap.aii.utilxi.hmi.api.HmiClientAdapter.invokeMethod(HmiClientAdapter.java:92)
 at com.sap.aii.ibdir.server.serialization.cpa.HmiProcessCacheRefreshClient.call(HmiProcessCacheRefreshClient.java:67)
 ... 43 more
Thrown:
com.sap.aii.utilxi.hmi.api.HmiMethodFault: Serialization error
 at com.sap.aii.utilxi.hmi.api.HmiMethodFault.parseGdi(HmiMethodFault.java:156)
 at com.sap.aii.utilxi.hmi.core.msg.HmiResponse.setState(HmiResponse.java:181)
 at com.sap.aii.utilxi.hmi.core.msg.HmiResponse.parseGdi(HmiResponse.java:132)
 at com.sap.aii.utilxi.hmi.api.HmiHttpJDKClient.sendRequestAndReceiveResponse(HmiHttpJDKClient.java:256)
 at com.sap.aii.utilxi.hmi.api.HmiClientAdapter.invokeMethod(HmiClientAdapter.java:92)
 at com.sap.aii.ibdir.server.serialization.cpa.HmiProcessCacheRefreshClient.call(HmiProcessCacheRefreshClient.java:67)
 at com.sap.aii.ibdir.server.serialization.cpa.InternalSerializationServiceService.serializeForCache(InternalSerializationServiceService.java:281)
 at com.sap.aii.ibdir.server.abapcache.content.CacheCPA.addContent(CacheCPA.java:594)
 at com.sap.aii.ibdir.server.abapcache.content.CacheCPA.addContent(CacheCPA.java:208)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:599)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:487)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:222)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:149)
 at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.setXmlDataAndBufferSize(CacheRefreshSession.java:123)
 at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.<init>(CacheRefreshSession.java:40)
 at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.getInstance(CacheRefreshSession.java:54)
 at com.sap.aii.ibdir.web.abapcache.CacheRefreshServlet.doGet(CacheRefreshServlet.java:47)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
 at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:163)
 at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:82)
 at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124)
 at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:74)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:425)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
 at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
 at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
 at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
 at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
 at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
 at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
 at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
 at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Please give me a valid solution that can help me to overcome this error.
Thanks in advance
Regards,
Sami

Hi Sami,
just go to IR........open your BPM............from the menu, choose check option........see if you get any errors for your bpm process..........if there are any error, then edit your bpm and do the changes and save and activate it........if there is no error then also just edit your BPM description and save and activate it again......now in SXI_CACHE you should see your integration process.........if still SXI_CACHE does not show your BPM process then do a complete cache refresh....then rerun SXI_CACHE and now you should see your BPM process.....then in ID just import your BPM process and do the required configuration..........
Regards,
Rajeev Gupta

How to configure Integration Directory for Integration process async sync

Hi Experts,
I am confused about doing configuration in Integration Directory i.e receiver determination,interface determination and receiver agreement and sender agreement for my integration process as it involve synchronous send at target side.
In my Scenario , we get Purchase order request(asynchronously) from SRM system in proxy xml format which we have to map to Cxml format send it to third party system(say system 2) as http request.Then we will recieve a response from system2 in Cxml format through HTTP.Now,we have to map this response as to SRM system via proxy code for successful and error case .If error occured we also have to mail to the respective department about the error occured via mail adapter.Proxy to XI is a asynchronous communication and XI to System2 is a synchronous communication .Then again XI to SRM is a asynchronous communication via proxy.I have request and response External defination for Cxml i.e HTTP side.
I have done following integration process in ESR
Start- Receive(1)---Transformation(2)-send(3)-Fork(4)--
stop
...................................................................................................... .....[----Branch 1 [-Transformation(5)-Send(6)-
.......................[-----Branch 2 -
SWITCH STEP to check error code[
............................................................................................................[.otherwise branch of switch
Fork(4)----[
.......................[----Branch 1-Transformation (9)-send(10)-
Here,
Recieve(1) -- is used for recieve request from SRM.Mode is asynchronous
Transforamtion(2)-- is used for operation mapping between request of SRM to HTTP request.
send(3) --is used to sending request synchronous to HTTP,mode is synchronous,used synchronous abstract interface,abstract reqhttp and abstract resphttp
switch-switch Branch1 is used for checking error response to be true---
Transformation(5)--- is used to map HTTP response to Mail response structure
Send(6)----
is used to send mail content to Mail adapter
Transformation(9)---- is used to map HTTP response to Proxy response
Send(10) --- used to send mapped proxy response to SRM as to update status by calling calling Function module using proxy code.
Thanks
Deepak

Deepak,
In BPM data does not flow in Backword direction!
take any step in your BPM the message it is goiong to receive will be what a step just before it is giving to BPM.
Now in your case
IR Part:
You have to call Third part Synchronously and the input to it will be what Proxy has given to you.
Create an Abstract Synchronous(in case of abstract you need not bother it is Inbound or Outbound) in which(I mean the Message Interface) The Output message will be what you have Received from Proxy and the input message will be what you are going to receive from the Third party as a Response. Now you would have Inbound Synchronous Interface created for calling Third party.
Have a Interface Mapping between the Abstract Synchronous and Inbound Synchronous Message Interface.
ID Part:
For synchronous Step: BPM will; be sender with Message Interface Abstarct Synchronous
Third Party will be receiver With Inbound Interface(Synchronous). Use the INterface Mapping between Abstract Synchronous and Inbound Synchronous that You have created in IR.
Have a Receiver Agreement for the Thirs part.
No Sender agreement required in case of BPM as a Sender.
Thanks,
Sunil Singh

Configuration for Message Exchange in integration process

Hi,
I'm a beginner in SAP XI (7.0) and trying to develop an integration process for a purchase order.
There will be sent a message via Http to a receiver with Ftp.
So for the integration process are two communication channels necessary which will be defined in the integration directory:
One for the Sender: Http.
One for the receiver: Ftp.
Within the integration process are some sender and receiver steps with Bapi's.
My questions are:
- how and where could these sendings to a Bapi (send step) and from a Bapi (receive step) be configured?
- is it possible at all to configure a communication channel for these sending and receiving steps within a integration process?
Thanks for your help!
Zoran

Hi Zoran
While using BPM as well you will need to have communication channels.
BPM - > BAPI request.
BAPI response -> BPM
both sender and receiver channels are required for you.
1.Demand for a material is send via HTTP to XI
2.XI does a material availability check to the SAP system
3.A material reservation has to be done if there are any materials available in the stock (inventory) to the SAP system
4.If there is no material available a purchase order to a supplier (no SAP) has to be done via FTP
5.Parallel to the purchase order a purchase order confirmation is send to the the SAP system.
6.The supplier sends a purchase order confirmation to XI
7.The XI sends a purchase order confirmation to the SAP system
If i understood your requirement correctly and you want to use BPM. You need to do following in BPM
Receivestep1(receive HTTP post) -> transform1(mapping to BAPI request) ->send step1(Send BAPI request to SAP) -> Receivestep2 (Receive BAPI response from SAP) -> Transform2 (Map BAPI response to File)-> send2(File post to non SAP supplier)-> Receive3(receive purchase order confirmation)-> transform3(map to SAP purchase order confirmation)-> send3(Purchase order confirmation to sap)
You need no of channels
1.Receive 1 - (HTTP)
2.Send1/Receive2 - (RFC)
3.Send2 - (FTP)
4. Receive3( HTTP or FTP)
5. For purchase order confirmation.
Thanks
Gaurav

How to configure Integration Builder using an Integration Process?

Dear experts,
I have problems configuring the Integration builder using a Integration process.
Scenario = idoc to PI, integration process transforms idoc to file, file to external system.
My integration process starts with an abstract interface (structure of idoc) and ends with an abstract interface (structure of file). But I just can not configure the integration builder correctly...
I did it as follows:
Sender agreement: comm.component = SAP system; interface = Idoc;
receiver determination: comm.component = SAP system; interface = Idoc; configured receiver = my integration process;
interface determination: comm.component = SAP system; interface = Idoc; receiver = target system comm.component;
Receiver agreement: comm.component = SAP system; receiver = target system comm.component; interface = filestructure of target
This does not work unfortunately. How can I pass the Idoc to my abstract interface? And how can I pass the result of my integration process (abstract interface) to the inbound interface? In the interface determination I can not select my Operation Mapping (but that should not be nessesary as I already created an Integration Process)...
Hope anyone can help.
Thanks and regards
William

Just consider your BPM is receiver, and sender:
Src --> BPM (BPM is Receiver)
==========
Sender Agreement (If it is IDOC or HTTP, then you do not have to create)
Commnunication Channel
Receiver Determination
Interface Determination
BPM --> Target (BPM is sender)
============
Receiver Determination
Interface Determination
Communication Channel
Receiver Agreement
If your BPM interact with other systems, you will have more Receiver Determination and Interface determination, possible Receiver agreement
Hope this clear your doubts
Liang

Multiple Queue Assignment for Integration Process - PI 7.11

Hi,
I am trying to configure multiple Queues for an Integration Process.
The Integration Process is straight forward, except for a Asynchronous Request Response pattern with correlation. (A asynch send step - immediately followed by a asynchronous receive step with Correlation)
I have done the following
1) In IR set the Queue as Multiple - Content Specific
2) In SWF_INB_CONF transaction reconfigured Multiple Queues - Content Specific without buffering
But when I trigger the message, the message is not at all triggering/entering the Integration Process. The error message is BPE Internal Failure.
But if I reconfigure the IP as One Configurable Queue & "Without Buffering", it is working. But we want multiple queues assigned to this Process.
Thanks in advance.
Regards,
Sudharshan N A

Bjoern, there are blogs/wikis available which should be searched before a question is asked on forum. The information you need is quite basic one and I will therefore lock this thread.
Regards,
Prateek

Integration process in File to BPM Scenario

hi,
gud morning. i got a problem while designing a BPM. in designing the integration process in IR, i am not able to get both the abstract interfaces to select from, while defining the container. plz post a solution for this. thank u.

Hi,
In this blog, I have used Business Service created in the integration directory.. This is an abstract . So I need to specify , the Sender and Receiver Interfaces explicitly in the business service. and it doesnot have any entry in the SLD.
But if you create the Business System in the SLD and if you import that into the Integration Directory-->Assign this into your configurations scenario, then this step is not required.
Regd. Importing Integration Process- BPM is kind of Abstract Service.. i.e BPM is acting as a Receiver Service and Sender service both..
i,e Source to BPM ( here BPM is a Receiver)
BPM to Target( here BPM is a Sender Service)
Hope this clarifies..
Regards,
Moorthy

Integration Process Receiver Determination Step

Hi experts,
May I know whether the "Receiver Determination Step" (in Integration Process) that collects the list of receivers configured, can be used only to find list of asynchronous receivers?
Can't we use this "Receiver Determination Step" in synchronous scenario? If yes, may i know how to?
Thank you!
Best Regards,
Saravanan

Thank you Gaurav!
I can understand we can use multi-casting.
To clearly put my scenario, I have to use synchronous send (so cannot split send and receive step, and so no need of correlation) in my BPM, which have to synchronously send (and so it receives within same step) message to multiple receivers. This is the reason I am trying to use receiver determination step first and in a loop trying to synchronously send message to each receiver and receiving response.
Now my problem is in the receiver determination step, it is not identifying any of the receivers configured in the integration directory. The receiver determination list returns empty.
So, I want to know whether this receiver determination step is only for async receivers or synchronous receivers also.
Best Regards,
Saravanan N

Missing sender information in message from Integration Process

Hi All,
I am testing a scenario uses Integration Process. This Integration process sends out a async message but this message has empty sender tag in header , Because of this routing rules and agreements defined for this are not triggered and message goes into error state.
There is sender interface Information in message header but not integration process information. I am working on SAP NetWeaver PI 7.1 system. This is working from other synchronous interface in same process.
Routing rule and receiver agreement has sender as mandatory field, so can not define generic set without sender component.
I went through SAP Note 807640 But there is no information about such error.
Am I missing something in configuration? Please let me know how can i configure Routing Rule and Interface Determination for this scenario.

Thanks for replying to the post.
Integration process is used as a async-sync bridge. Following are high level steps.
1. Receive async FI message from sender
2. Map message to BAPI SAP FI document
3. call Sync BAPI.
4. Map the response of BAPI.
5. Post it back to sender in async mode.
I am having problem in step 5 where message is coming out of BPE without its own name (i.e sender name). Thus it does not triggers Routing rules and fails.

Idoc to flat file using Integration process does not show up at all

Hello All,
I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
However when I send the IDOC from SAP then the Integration Process scenario just does not work.
I Checked SXMB_MONI There is no entry for the Integration Process.I can see entry for other without Integration Process.
SXI_CACHE : I can see my Integration Process active
SWEQADM : I have activated the Event Queue and Background job
SWF_XI_ADM_BPE : ALL BPE is showing green status.
All syntax check on IP are fine.
There is no Basis Help for me so there could be some additional basis steps which need to be configured. Has anyone faced such an issue with Integration Process?
Regards
Prashanta

Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
1. let us split the scenario into two.
a. Sender to BPM ( Integration Process).
b. BPM to Receiver.
2. First let us configure the first Sender to BPM.
a. Sender Agreement( Not required ).
b. Receiver Agreement( NOT Required).
c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(Integration Process).
d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
3. Now let us configure the Second BPM to Receiver.
a. Sender Agreement( NOT Required)
b. Receiver Agreement( Sender Service(Integration process), Receiver Abstarct Interface,Receiver service, Inbound Interface).
c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
d. Interface Determination( Inbound Interface, Message Mapping(NOT Required)).
So Finally we have One Receiver Agreement, Two Receiver Determinations, Two Interface Determinations.
Please let me know if you have any more queries.
Regards
Gopi

Spliting a Message to reuse an Integration Process made for a single one.

Hi,
I have a Integration Process that works well for a XML message of the type:
<EMESSAGE>
<PERSON>
 <TAG_1>
 <TAG_2>
</PERSON>
</EMESSAGE>
My BPM process the data for the Person correctly.
Now I want to be able to tried more than one person per input message, some thing like:
<EMESSAGE>
<PERSON>
 <TAG_1>
 <TAG_2>
</PERSON>
<PERSON>
 <TAG_1>
 <TAG_2>
</PERSON>
<PERSON>
 <TAG_1>
 <TAG_2>
</PERSON>
</EMESSAGE>
I build a 1:n Interface Mapping that creates me the following structure:
<Messages>
<Message1>
<EMESSAGE>
<PERSON>
 <TAG_1>
 <TAG_2>
</PERSON>
</EMESSAGE>
</Message1>
<Message2>
<EMESSAGE>
<PERSON>
 <TAG_1>
 <TAG_2>
</PERSON>
</EMESSAGE>
</Message2>
<Message3>
<EMESSAGE>
<PERSON>
 <TAG_1>
 <TAG_2>
</PERSON>
</EMESSAGE>
</Message3>
</Messages>
But when I use a ForEach Block in my new BPM, it doesn't work if there is more then 1 person in the input. The error message I got is:
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping-Namespace:http://domain.com/xi/domain_4</Trace>
<Trace level="1" type="T">Mapping-Name:IM_CPM_AbsSync_to_N_CPM_AbsSync</Trace>
<Trace level="1" type="T">Mapping-SWCV:3E235261F43111DDB40AC952C0A80C15</Trace>
<Trace level="1" type="T">Mapping-Step:1</Trace>
<Trace level="1" type="T">Mapping-Type:XSLT</Trace>
<Trace level="1" type="T">Mapping-Program:CPM_to_N_ContextPersonMessage</Trace>
<Trace level="3" type="T">Mapping has one input message.</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating XSLT mapping CPM_to_N_ContextPersonMessage.</Trace>
<Trace level="3" type="T">Load 3e235261-f431-11dd-b40a-c952c0a80c15, http://domain.com/xi/domain_4, -1, CPM_to_N_ContextPersonMessage.xsl.</Trace>
<Trace level="3" type="T">Search CPM_to_N_ContextPersonMessage.xsl (http://domain.com/xi/domain_4, -1) in swcv 3e235261-f431-11dd-b40a-c952c0a80c15.</Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet CPM_to_N_ContextPersonMessage.xsl.</Trace>
<Trace level="2" type="T">Returned form XSLT processor.</Trace>
<Trace level="3" type="T">XSLT transformation: CPM_to_N_ContextPersonMessage.xsl completed with 0 warning(s).</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="1" type="T">Content Type application/xml</Trace>
<Trace level="1" type="T">No interface specified for parameter 2</Trace>
</MappingTrace>
Does someone have any idea or a suggestion on how to reuse my BPM that works for a single person?
Thanks in advance for your suggestions.
greg

ok no success for the moment, so I will try to describe my BPM more precisely:
The DT I use can contain up to 1'000 PERSON record inside a unique EMESAGE reccord (the root element)
My containers: (all are of type Abstract Interface of my DT)
Input (Process)
requestList(Process) Multiline
request(block)
response(block)
Receive Request Step
Message: input
Start Process: Yes
Mode : Async.
Split (Transformation) Step
IM: My Interface that does the 1Message with N PERSON records to N Messsages with 1 PERSON record
Create new transaction: Yes
Source: input
Target: requestList
Block Step
Mode: ForEach
Block Start: New transaction
Block End: New transaction
Multiline_Element: RequestList
CurrentLine: request
No end condition
Inside the block
My Sync Send call to a BAPI
Source: request
Target: response
A final Async Send step
Message: response.
The workflow stop at the Transform step, as if hte fact that many messages come in result could not be handled back. Here are the details for the Interface mapping used in the transformation step:
Source: MyDataTypeAbstractAsynchroneInterface
Occurrence: 1
Destination:
Occurrences: 0:unbounded
Mapping program: the following XSLT:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
 <xsl:template match="EPERSON">
 <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <xsl:for-each select="CONTEXTPERSON">
 <xsl:element name="ns0:Message{position()}">
 <EPERSON xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ContextPersonMessage">
 <xsl:element name="CONTEXTPERSON">
 <xsl:attribute name="personid"><xsl:value-of select="@personid"/></xsl:attribute>
 </xsl:element>
 
 </EPERSON>
 </xsl:element>
 </xsl:for-each>
 </ns0:Messages>
 </xsl:template>
</xsl:stylesheet>
Still any suggestions ?
The trace of the error is the same as before, so I won't copy paste it again.

Configuring an Integration Process

Similar Messages

Maybe you are looking for