Idoc to flat file using Integration process does not show up at all

Hello All,
I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
However when I send the IDOC from SAP then the Integration Process scenario just does not work.
I Checked SXMB_MONI There is no entry for the Integration Process.I can see entry for other without Integration Process.
SXI_CACHE : I can see my Integration Process active
SWEQADM : I have activated the Event Queue and Background job
SWF_XI_ADM_BPE : ALL BPE is showing green status.
All syntax check on IP are fine.
There is no Basis Help for me so there could be some additional basis steps which need to be configured. Has anyone faced such an issue with Integration Process?
Regards
Prashanta

Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
1. let us split the scenario into two.
a. Sender to BPM ( Integration Process).
b. BPM to Receiver.
2. First let us configure the first Sender to BPM.
a. Sender Agreement( Not required ).
b. Receiver Agreement( NOT Required).
c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(Integration Process).
d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
3. Now let us configure the Second BPM to Receiver.
a. Sender Agreement( NOT Required)
b. Receiver Agreement( Sender Service(Integration process), Receiver Abstarct Interface,Receiver service, Inbound Interface).
c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
d. Interface Determination( Inbound Interface, Message Mapping(NOT Required)).
So Finally we have One Receiver Agreement, Two Receiver Determinations, Two Interface Determinations.
Please let me know if you have any more queries.
Regards
Gopi

Similar Messages

Integration Process does not start

Hi guru's
My scenario is this. From ECC we send Idocs to PI. We have an integration process to receive the idocs because only max 9999 are passed in the port.
We run just around 11000 CREMAS idocs now.
The problem is that the integration process does not start on our QA environment while it does start on DEV environment.
I've run many checks on both environments and they all look the same.
To name a few:
* Cache are all green and up-to-date.
* I checked the WF models which are behind the Integration Process and they are the same.
* Event correlation is correct in both environments
* When i test the idocs are correctly sent from ECC to PI.
However on DEV I see in transaction SXMB_MONI_BPE i see that the integration process is triggered and started. It waits 10 minutes and collects any messages that come in, and then bundles these and sends them on to the receiver.
On QA i do not see the Integration Process being started. Only records i see in SXMB_MONI_BPE are three work items, 2 completed, 1 ready, all 3 are called waiting for event.
I'm probably missing some configuration somewhere but what could it be?
Regards
Robert

Hi Eng Swee,
Thx. I checked it already and it works fine.
Meanwhile i did do some changes and some retests and now i saw somewhere that all my tests were creating more steps in an already started integration process, that was still waiting.
I now cleared some old workitems and started afresh.
What i see now is:
1) the BPM process start correctly
2) it receives 1 or 2 or 3 or n messages
3) it then waits for the deadline to finish, i.e. it should run for 10 minutes and then proceed to the next step which is sending the collected idocs to receiver.
On DEV the deadline works fine. On QA it doesn't.
IN SWU3 i have done the customizing and it shows green, so that part is OK.
Still the deadline is passed and it doesn't have the desired effect on mu BPM process (workflow).
Are there any other checks i can do to see if the deadline mechanism is properly working?
Is there a maybe a manual step i can do to trigger the deadline? Then at least i get some information on where the real problem is.
(Sorry for earlier confusion but i hadnt realized that there was still a process running)
Regards
Robert

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain!

Css-file on Romote Site does not show changes

hello
I use Dreamweaver CS4 on Win7 64bit system.
I have a new website in construction and today the developer made changes to the Style.css file. Made the changes on an other computer and not in Dreamweaver.
Now, when I open the Style.css file from the Remote Site, it does not show the changes that were made. However when I delete the Style.css file in my Local Files directory and copy the Style.css file from the Remote Site to the Local Files and open it from the Local Files in Dreamweaver, it shows the new file with the changes that were made. But the Remote file keeps showing the old data.
I took several steps to try to eliminate this problem. Closing Dreamweaver and deleting the Configuration folders in Users>[NameUser]>AppData>Roaming>Adobe>Dreamweaver CS4> Both in en_US and nl_NL, although the latter did not contain any files.
This did not work. Deleted the Style.css file on my Remote Site and uploaded it again from my Local Files. Nope. Still shows rthe css-file with the old data.
Anybody any idea where Dreamweaver gets these old data from and how to make it work differently?
greetings, Lex van de Oudeweetering

Hello Ken
I did not say my page is troubled. The trouble is that the style.css file opened from the Remote Site in Dreamweaver shows the wrong data, but in effect has the right data, because when copied to the Local Files and opened from there it shows the right data.
The link to the page/site in construction is http://www.lex-illustrator.nl/lexillus
And I have made screenshots of the opend css files and assembled them beside each other.
On the left opened from the Local Files and on the right side the same css file opened from the Remote site.
The orange dots indicate where they differ, the green ones the items that were changed today. So it's not a problem of only today.
http://www.lex-illustrator.nl/2xcss.gif
And I have to say I had issues before with updating files to the Remote server and how Dreamweaver shows them. Much of the times I have to delete the Remote file first to get it dispayed right if I check if it has worked by trying to open it from the Remote server.
So it's not only limited to this site under construction. It looks like a Dreamweaver thing to me.
Greetings, Lex

Data in Health first got doubled and then does not show anything at all

Hello together,
i'm experiencing issues with the health app.
Until yesterday all the data, like distance, steps, weight, was perfectly right collected and shown within health.
Yesterday i went for a run and installed Runtastic and 'Runtastic Me' afterwards. First of all i checked, that both new apps were not allowed to write distance or steps, but to read them.
Nevertheless the distance of my run got doubled in health. Since today health does not show any data at all, but Withings (which i had installed before and worked fine) an Runtastic Me show the data right. In health i cannot select Iphone 6 as data source, which i was able to do before.
How can i fix this?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") 
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Integration Process does not appear in ID or Runtime Cache

I created an Integration process and it has not appeared as an available service in the Integration Directory when createing a receiver determination. It also does not appear in the runtime cache.
Last week I created a different IP and that exists in both places. Between that time and now we migrated the SLD from one machine to another; I don't know if this will have an affect, but all messages interfaces created today appear in the Integration Directory, so there is a communication path at least.
Can anybody advise how to proceed?

Hi
You should import the IP from IR to ID.
In ID Goto Objects tab, here expand Service without party, you got the IP, from here you right click mouse>new>give some name and import your created IP in the IR.
Then you get the IP in the ID.

BPM Process does not show newly added task

I added a new task to my current BPM Process which has several tasks already built into it and they work when deployed. When I execute the workflow and get to that step, I get the following message: Details not available for this task. I am using jDeveloper 11.1.1.5. I created my page with ADF. I can see the pages for all the rest of the tasks in my process but not this newly added step. I have checked the source for this task against other tasks in the process and it looks the same. Does anyone have an idea what I might need to change or add in order to make this work?
Edited by: user10279592 on Jan 13, 2012 7:20 AM

If you're getting the Server 500 error and it is not an initiator task, what are you seeing at the bottom of your log file?
If you're getting the Server 500 error and it's an initiator task, then there is a trick to figuring out the real problem (close the dialog -> refresh the worklist -> select the work item at the bottom of the list). The initiator activity makes it necessary to do this additional step to see what the issue is.
Hope this helps,
Dan

Browsing for file in icon mode does not show all files and folders.

When in Illustrator and I select open, the preview pane does not arrange the files to fit the window size. This does not happen in list mode but in icon mode. I can't see all the files and folders because they are outside of the window and I can't scroll to the right to see them.

Yosemite, right?
Don't use anything other than list view. It's all buggy.

Files copied as .lnk files to usb and does not show up in Windows

When I copy files from the MBP to a USB disk, instead of copying the files as is, the Mac converts the files into a .LNK file, which then shows up as "shortcuts" rather than the copied file in Windows. Why is this?

same here.. it happened after installing Lion and updating iTunes
My nano does not appear on iTunes or desktop, however it charges.
iPod nano 2nd Gen
Mac OS X Lion 10.7
iTunes 10.4
please don't tell me that Apple added my lovely nano to Black list !!

Blue Ray disk created using premiere 10 does not show menus

I have a video project with a main menu and 5 scene menus. I burn the project (using premiere Elements 10) to a Blue-ray disc using preset H.264 1920x1080i PAL Dolby with quality option set to "Fit Contents to available space" . The software happily creates the disc with 17.6GB of data (main stream, 00000.m2ts is 18,413,568 KB (17.5GB) and 6 small streams for main & scene menus.
However, when this disc is reinserted into the drive, it does not automatically start with the main menu.
If I burn the same project to a DVD with PAL_Widescreen_DolbyDVD preset with quality option set to "Fit Contents to available space", it creates the DVD which, when reinserted into the drive, starts automatically with the main menu.
The environment is Wndows 7 64bit with SONY BD RW BWU-500S ATA Device .
What do I need to do to get the Blue Ray disc to start with the main menu?
Killy

Killy
Thanks for the reply.
Any day now I am intending to update the following blog post dealing with the type of computer Blu-ray playback situation that you are facing, but I have not gotten to it yet.
Please review the blog post. It will give an idea of some of the issues involved.
ATR Premiere Elements Troubleshooting: PE: Blu-ray Computer Playback and More
Please look at the Media Player Classic HC x64.
The VCL player description is for 2.0.8, 32 bit, the latest non beta version at the time (August 2013). But the principles should hold up in later versions of the VCL Player.
I should have updates on my 2013 observations soon.
ATR

CR2011 Dynamic Parameter does not show list at all

I am upgrading some Crystal Reports from CR 8.5 to 2011. Some would be better served by using a dynamic parameter to allow the user to select the data for the parameter from the database information. I have created a dynamic parameter on the Customer ID and set the description to be the customer name. I have set it to handle multiple values.
When I preview the report in the Crystal designer, I get a text box to type in but not a drop down. To be clear, I am not talking about the LOV 1000 limit here. There are only 50 customers in the sample file I am working with. I tried turning the static parameter into a dynamic one, I deleted the original parameter and created a new one.
In case it matters, the parameter is only used as part of the selection formula and if I enter a proper customer id, it will retrieve the data. This report has about 7 tables (no stored procedures or views) and a subreport of two tables that is linked to the main report on the customer id. The parameter is only used on the main report for record selection. The SQL statement in the main report and subreport did need to be reset when I first opened the report in CR2011 but I did that on both. I have verified the database and the option to verify on first refresh is checked. The original parameter did have an imported list of about 3000 customer names. I tried exporting the CR template to a new file and while the file size changed, the behaviour did not.
When I create a brand new report on two of the tables, including the same customer table, and create the parameter the same way, it shows me the list properly in a dropdown at the prompt stage.
I am not sure where to go here or what else to try. If anyone has any suggestions, I appreciate the help. TIA, rasinc

Thank for the reply Dell,
I see the logic in adding the extra table and keeping it unlinked and I do know the crazy data that can come up if I use it linked to other tables or use the fields in other parts of the programming.
However, I've now tried it several times, creating the parameter on just the name alone, with the ID alone, etc. and I still only get a text box to type into.
I have made sure the original selection criteria
{customer.Id} = {?Customer}
if from the original table, not the new one, which I assume you expected me to do.
So I decided to run the same report through CR XIR2. When I update the Set Datasource Location, I am now getting the message
"Invalid Argument provided.
Details: The alias requested 'company', contains a combination of characters which is not considered to be valid"
Company is a table containing information about the main company, not the customers. The same message pops up for another table as well.
Then I get a message that says:
"Prompting failed with the following error message: 'List of Values failure: fail to get values. [Cause of error: The table company does not exist in the document.]'
Error source: prompt.dll Error code: 0x8004380D"
This appears to be a database access issue but I know the firewalls are not a problem because I can create a new report and get the LOV properly with the same database and same desktop computer. I can take that report created in CR2011 and use it in CRXI also and get the proper LOV. Is it possible I am dealing with template corruption because there were so many items imported into the static list before?

TS1369 I have an ipod classic about 4/5 years old. I lost the XP hard drive with my original itunes on, so I have a new W8 HD with a newly downloaded itunes. However, my ipod does not show up at all, nor is it shown on my laptop. Nothing. Cable/USD fi

I have an ipod classic (4/5 yrs old) ,which I syced with itunes on an XP laptop, since destroyed. I have a W8 laptop with a newly downloaded itunes, but, it will not show any trace of my ipod when connected, nor does the laptop. The cable and usb port are both tested and fine. Any ideas.

Hello Ditchblow,
Congratulations on your new laptop! I found an article with steps to address the issue you described:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Deleted files on FiWi-disk does not show in Recycle bin

I'm using FireWire disk for storage and stuff. I just discovered that if I move files to Trash, they don't get there.
I'd like them to - how do I fix that?

what exactly happens when you trash something from that drive? do you get a popup saying that it will be deleted immediately?

File sharing in apps does not show

When connecting my Ipod Touch 2nd Gen in Itunes10/Windows, I cannot share files with my apps (fast reader, e.book). The window for file sharing simply is not there!

It should be device > apps tab > scroll down > file sharing area. What do you see below the app organization area when you scroll down?
tt2

Maps does not show up at all in Notification Center why

Hello, I am trying to get Maps to show up in notification center so i can enable notifications for them. I do not see it anywhere on my wifes phone but I see it on my phone.

The way to fix the issue is to log out of iCloud on your main computer and sign back in. Then go to the new maps app on the desktop and send yourself directions to your iOS device. When you do this, this will activate that notification option you do not see in your notification center on your iOS device. This is what happened for me. I figured it out by doing this myself. For some reason doing this activates maps to show up in notification center.

Idoc to flat file using Integration process does not show up at all

Similar Messages

Maybe you are looking for