Configuring Application server on windows (CMDTUX_CAT:16855 error)

Hi there,
My environment specs:
OS: Windows 2008
DB: SQL Server 2008 with SP2
Oracle software installed:
1. JRockit JDK R28.1 for Java SE 6 with JRockit Mission Control 4.0.1 for Microsoft Windows
2. Oracle WebLogic Server 11gR1 (10.3.4) Generic and Coherence
3. Tuxedo 10gR3 for MS Windows Server 2008 wMS VS 2008 x86 32-bit (NO RP043 patch installed)
4. PeopleSoft 8.52
5. PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0 Feature Pack
6. Database Configuration wizard completed successfully with following warning. (Setup has detected that the PeopleTools version does not match the version in the installed database. The database may not be created successfully. Please check the log file(s) located under the log directory for details.)
7. I was configuring the Application Server based on the installation guide from Oracle and I ran into this error.
Any help is greatly appreciated.
Below is the log:
PeopleSoft Domain Administration
Domain Name: HR84
1) Boot this domain
2) Domain shutdown menu
3) Domain status menu
4) Configure this domain
5) TUXEDO command line (tmadmin)
6) Edit configuration/log files menu
7) Messaging Server Administration menu
8) Purge Cache
9) Preload Cache
10) Clean IPC resources of this domain
q) Quit
Command to execute (1-10, q) : 1
PeopleSoft Domain Boot Menu
Domain Name: HR84
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 2
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2008, 32-bit, Patch Level (none)Booting admin processes ...
exec BBL -A :
process id=3704 ... Started.
1 process started.
Attaching to active bulletin board.
Attempting to boot ...INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2008, 32-bit, Patch Level (none)
Booting server processes ...
exec PSWATCHSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -ID 45196 -D HR84 -S
PSWATCHSRV :
process id=2596 ... Started.
exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D HR84 -
S PSAPPSRV :
process id=2668 ... Started.
exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D HR84 -
S PSAPPSRV :
process id=2776 ... Started.
exec PSSAMSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSSAMSRV :
process id=3756 ... Started.
exec PSANALYTICSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSANAL
YTICSRV :
process id=1736 ... Started.
exec PSANALYTICSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSANAL
YTICSRV :
process id=2324 ... Started.
exec PSANALYTICSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSANAL
YTICSRV :
process id=1640 ... Started.
exec PSMONITORSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -ID 45196 -D HR84
-S PSMONITORSRV :
process id=4048 ... Started.
8 processes started.
Checking process startup status. This may take up to 120 seconds.
Please wait...
INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2008, 32-bit, Patch Level (none)
Booting server processes ...
**exec PSRENSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSRENSRV :**
**CMDTUX_CAT:1685: ERROR: Application initialization failure**
**tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha**
**ndler**
**tmshutdown -qy**
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the domain log file? (y/n) [n] :y
PSADMIN.3552 (0) [12/06/11 13:20:19](0) Begin boot attempt on domain HR84
PSAPPSRV.2776 (0) [12/06/11 13:20:31](0) PeopleTools Release 8.52 (WinX86) start
ing. Tuxedo server is APPSRV(99)/1
PSAPPSRV.2776 (0) [12/06/11 13:20:31](0) Cache Directory being used: C:\Users\Ad
ministrator\psft\pt\8.52\appserv\HR84\CACHE\PSAPPSRV_1\
PSSAMSRV.3756 (0) [12/06/11 13:20:31](2) Min instance is set to 1. To avoid loss
of service, configure Min instance to atleast 2.
PSSAMSRV.3756 (0) [12/06/11 13:20:31](0) PeopleTools Release 8.52 (WinX86) start
ing. Tuxedo server is APPSRV(99)/100
PSAPPSRV.2668 (0) [12/06/11 13:20:31](0) PeopleTools Release 8.52 (WinX86) start
ing. Tuxedo server is APPSRV(99)/2
PSAPPSRV.2668 (0) [12/06/11 13:20:31](0) Cache Directory being used: C:\Users\Ad
ministrator\psft\pt\8.52\appserv\HR84\CACHE\PSAPPSRV_2\
PSSAMSRV.3756 (0) [12/06/11 13:20:32](0) Cache Directory being used: C:\Users\Ad
ministrator\psft\pt\8.52\appserv\HR84\CACHE\PSSAMSRV_100\
PSAPPSRV.2668 (0) [12/06/11 13:20:32](1) GenMessageBox(0, 0, M): Security Table
Manager (Get): The database is at release 8.50. The PeopleTools being run requi
re databases at release 8.52.
PSAPPSRV.2668 (0) [12/06/11 13:20:32](0) Server failed to start
PSSAMSRV.3756 (0) [12/06/11 13:20:32](1) GenMessageBox(0, 0, M): Security Table
Manager (Get): The database is at release 8.50. The PeopleTools being run requi
re databases at release 8.52.
PSSAMSRV.3756 (0) [12/06/11 13:20:32](0) Server failed to start
PSAPPSRV.2776 (0) [12/06/11 13:20:32](1) GenMessageBox(0, 0, M): Security Table
Manager (Get): The database is at release 8.50. The PeopleTools being run requi
re databases at release 8.52.
PSAPPSRV.2776 (0) [12/06/11 13:20:32](0) Server failed to start
PSRENSRV.3148 [12/06/11 13:22:33](0) PeopleTools Release 8.52 (WinX86) starting.
Tuxedo server is RENGRP(92)/101
PSRENSRV.3148 [12/06/11 13:22:33](3) Switching to new log file C:\Users\Administ
rator\psft\pt\8.52\appserv\HR84\LOGS\PSRENSRV_1206.LOG
PSADMIN.3552 (0) [12/06/11 13:22:40](0) End boot attempt on domain HR84
Do you wish to see the error messages in the Tuxedo log file? (y/n) [n] : y
132019.WIN2K8!PSADMIN.3552: Begin attempt on domain HR84
132023.WIN2K8!tmadmin.2936.3292.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
132025.WIN2K8!tmboot.2480.1216.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132025.WIN2K8!tmboot.2480.1216.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set
to 120 seconds
132025.WIN2K8!tmboot.2480.1216.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL op
tion is selected
132027.WIN2K8!BBL.3704.3912.0: 12-06-2011: Tuxedo Version 10.3.0.0 with VS2008,
32-bit, Patch Level (none)
132027.WIN2K8!BBL.3704.3912.0: LIBTUX_CAT:262: INFO: Standard main starting
132029.WIN2K8!tmboot.3816.1772.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132029.WIN2K8!tmboot.3816.1772.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set
to 120 seconds
132029.WIN2K8!tmboot.3816.1772.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL op
tion is selected
132030.WIN2K8!PSWATCHSRV.2596.1992.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with
VS2008, 32-bit
132030.WIN2K8!PSWATCHSRV.2596.1992.-2: LIBTUX_CAT:262: INFO: Standard main start
ing
132031.WIN2K8!PSAPPSRV.2776.404.0: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132031.WIN2K8!PSAPPSRV.2776.404.0: LIBTUX_CAT:262: INFO: Standard main starting
132031.WIN2K8!PSAPPSRV.2668.764.0: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132031.WIN2K8!PSAPPSRV.2668.764.0: LIBTUX_CAT:262: INFO: Standard main starting
132031.WIN2K8!PSSAMSRV.3756.756.0: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132031.WIN2K8!PSSAMSRV.3756.756.0: LIBTUX_CAT:262: INFO: Standard main starting
132031.WIN2K8!PSANALYTICSRV.2324.2760.0: 12-06-2011: Tuxedo Version 10.3.0.0 wit
h VS2008, 32-bit
132031.WIN2K8!PSANALYTICSRV.2324.2760.0: LIBTUX_CAT:262: INFO: Standard main sta
rting
132031.WIN2K8!PSANALYTICSRV.1640.2796.0: 12-06-2011: Tuxedo Version 10.3.0.0 wit
h VS2008, 32-bit
132031.WIN2K8!PSANALYTICSRV.1640.2796.0: LIBTUX_CAT:262: INFO: Standard main sta
rting
132032.WIN2K8!PSANALYTICSRV.1736.2452.0: 12-06-2011: Tuxedo Version 10.3.0.0 wit
h VS2008, 32-bit
132032.WIN2K8!PSANALYTICSRV.1736.2452.0: LIBTUX_CAT:262: INFO: Standard main sta
rting
132032.WIN2K8!PSMONITORSRV.4048.1804.-2: 12-06-2011: Tuxedo Version 10.3.0.0 wit
h VS2008, 32-bit
132032.WIN2K8!PSMONITORSRV.4048.1804.-2: LIBTUX_CAT:262: INFO: Standard main sta
rting
132032.WIN2K8!PSANALYTICSRV.1736.2452.0: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
132032.WIN2K8!PSANALYTICSRV.1640.2796.0: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
132032.WIN2K8!PSAPPSRV.2668.764.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
132032.WIN2K8!PSSAMSRV.3756.756.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
132032.WIN2K8!PSMONITORSRV.4048.1804.-2: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
132032.WIN2K8!PSAPPSRV.2776.404.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
132032.WIN2K8!PSANALYTICSRV.2324.2760.0: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
132233.WIN2K8!tmboot.3640.2792.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132233.WIN2K8!tmboot.3640.2792.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set
to 120 seconds
132233.WIN2K8!tmboot.3640.2792.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL op
tion is selected
132233.WIN2K8!PSRENSRV.3148.1988.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with VS
2008, 32-bit
132233.WIN2K8!PSRENSRV.3148.1988.-2: LIBTUX_CAT:262: INFO: Standard main startin
g
132233.WIN2K8!PSRENSRV.3148.1988.-2: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
132233.WIN2K8!tmboot.3640.2792.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error en
countered; initiating user error handler
132237.WIN2K8!BBL.3704.3912.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
132240.WIN2K8!PSADMIN.3552: End boot attempt on domain HR84
Press Enter to continue...
PeopleSoft Domain Administration
Domain Name: HR84
1) Boot this domain
2) Domain shutdown menu
3) Domain status menu
4) Configure this domain
5) TUXEDO command line (tmadmin)
6) Edit configuration/log files menu
7) Messaging Server Administration menu
8) Purge Cache
9) Preload Cache
10) Clean IPC resources of this domain
q) Quit
Command to execute (1-10, q) :

When i checked the event log i see the following errors:
Pid 3108: server failed to startup because SgnDBSignon() failed.
Pid 2224: server failed to startup because SgnDBSignon() failed.
Pid 3716: server failed to startup because SgnDBSignon() failed.
Below is my domain configs
Quick-configure menu -- domain: HR84
Features Settings
========== ==========
1) Pub/Sub Servers : No 16) DBNAME :[HC]
2) Quick Server : No 17) DBTYPE :[MICROSFT]
3) Query Servers : No 18) UserId :[PS]
4) Jolt : Yes 19) UserPswd :[PS]
5) Jolt Relay : No 20) DomainID :[HR84]
6) WSL : Yes 21) AddToPATH :[C:\Program Files\Microsoft SQL S
erver\100\Tools\Binn]
7) PC Debugger : No 22) ConnectID :[PSCID]
8) Event Notification: Yes 23) ConnectPswd:[P@ssw0rd]
9) MCF Servers : No 24) ServerName :[WIN2K8]
10) Perf Collator : No 25) WSL Port :[7000]
11) Analytic Servers : Yes 26) JSL Port :[9000]
12) Domains Gateway : No 27) JRAD Port :[9100]
Actions
=========
13) Load config as shown
14) Custom configuration
15) Edit environment settings
h) Help for this menu
q) Return to previous menu
HINT: Enter 15 to edit DBNAME, then 13 to load
Enter selection (1-27, h, or q):
Edited by: 897150 on Dec 6, 2011 11:30 AM
Edited by: 897150 on Dec 6, 2011 11:31 AM

Similar Messages

  • Error when configuring Siebel Server in Windows server 2003

    Hi
    I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
    2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
    GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     000000024f58096c:0     2012-03-08 01:13:33     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃

    Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
    Hope it helps,
    Wilson

  • Jdeveloper 11.1.1.6.2 is "NOT" allowing to configure application server

    when configuring application server on local Jdev (11.1.1.6.2) > Build JDEVADF_11.1.1.6.2_GENERIC_120329.1447.6268 on Windows 7
    i get below error
    ===================================================
    Dec 29, 2012 12:52:35 AM oracle.security.jps.internal.common.util.XmlSchemaValidationUtil$StrictErrorHandler warning
    WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: line 3 column 96.
    Problem invoking WLST - Traceback (innermost last):
    File "C:\oracle\Jdev111162\JDEV_INSTALL\jdeveloper\fadev\bin\FADevExtendDefaultDomain.py", line 583, in ?
    File "C:\oracle\Jdev111162\JDEV_INSTALL\jdeveloper\fadev\bin\FADevExtendDefaultDomain.py", line 253, in extendDomain
    File "C:\Users\krathanr.ST-IDC\AppData\Local\Temp\WLSTOfflineIni7049264434314395379.py", line 89, in addTemplate
         at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
         at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
         at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:420)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: unable to parse "template-info.xml" from template jar "C:\oracle\JDEV11~1\JDEV_I~1\jdeveloper\common\templates\applications\oracle.bicomposer.slib_template_11.1.1.jar
    ===================================================
    Please help.
    Thanks
    KrishnaKumar

    Does this happen the first time you start the wls?
    Or have you first started the wls and then tried to extent it?
    Timo

  • Install PeopleTools 8.53 with Linux Issue: Configure Application Server using psadmin

    Folks,
    Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Database 11gR1. OS is Oracle Linux 5. I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully into Oracle Linux 5. I have set up PeopleTools 8.53 Database Instance into Oracle Database Server successfully. Data Mover and Application Designer login into the Database Instance successfully. Web Server has been configured successfully.
    Now, I confront the issue regarding configuring Application Server as below:
    In Windows, I run /PT8.53/appserv/psadmin.exe to create a domain for the PeopleTools Database Instance successfully. But in Linux, the file /PT8.53/appserv/psadmin is light blue color and not executable, I try to run it in the following way:
    [user@userlinux appserv]$ ./psadmin
    Its output: ./psadmin: error while loading shared libraries: libtrio64.so: cannot open shared object file: No such file or directory
    My question is:
    Can any folk tell me how to configure Application Server using psadmin in Linux for PeopleTools Internet Architecture ? How to solve the above issue ?
    Thanks.

    Folks,
    Hello. Thanks a lot for replying. I run psadmin in the way below:
    [user@userlinux PT8.53]$ . ./psconfig.sh
    [user@userlinux appserv]$ export TUXDIR=/home/user/Oracle/Middleware/tuxedo11gR1
    [user@userlinux appserv]$ export LD_LIBRARY_PATH=$TUXDIR/lib:$LD_LIBRARY_PATH
    [user@userlinux appserv]$ export PATH=$TUXDIR/bin:$PATH
    [user@userlinux appserv]$ ./psadmin
    For Application Designer login, I use UserId PSADMIN and password PSADMIN, it works successfully.
    For Data Mover Bootstrap Mode login, I use UserId MYNAME and password MYNAME, it works successfully.
    When configure Application Server, I use UserID PSADMIN and password PSADMIN. But when boot the domain, the current server log file "APPSRV_0919.LOG" indicates that "Database Signon: Could not sign on to database PT853 with user PSADMIN."
    Then I use UserId MYNAME and password MYNAME to configure the Application server again. I boot this domain again. Strangely, the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN."
    I purge the cache and clean IPC resources of this domain, and boot this domain again but get the same error message as above.
    The content of current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG is below:
    PSADMIN.5732 (0) [2013-09-19T11:01:10.841](0) Begin boot attempt on domain PT853
    PSAPPSRV.9537 (0) [2013-09-19T11:01:30.338](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
    PSAPPSRV.9537 (0) [2013-09-19T11:01:30.484](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
    PSAPPSRV.9537 (0) [2013-09-19T11:01:30.539](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
    PSAPPSRV.9537 (0) [2013-09-19T11:01:30.548](0) Database Options: override_connection_reset: 0
    PSAPPSRV.9537 (0) [2013-09-19T11:01:30.550](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
    PSAPPSRV.9537 (0) [2013-09-19T11:01:30.551](0) Server failed to start
    PSADMIN.5732 (0) [2013-09-19T11:01:38.906](0) End boot attempt on domain PT853
    PSADMIN.10674 (0) [2013-09-19T11:02:20.766](0) Begin boot attempt on domain PT853
    PSAPPSRV.11239 (0) [2013-09-19T11:02:34.736](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
    PSAPPSRV.11239 (0) [2013-09-19T11:02:34.823](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
    PSAPPSRV.11239 (0) [2013-09-19T11:02:34.848](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
    PSAPPSRV.11239 (0) [2013-09-19T11:02:34.854](0) Database Options: override_connection_reset: 0
    PSAPPSRV.11239 (0) [2013-09-19T11:02:34.855](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
    PSAPPSRV.11239 (0) [2013-09-19T11:02:34.856](0) Server failed to start
    PSADMIN.10674 (0) [2013-09-19T11:02:41.270](0) End boot attempt on domain PT853
    PSADMIN.5107 (0) [2013-09-19T11:56:37.435](0) Begin boot attempt on domain PT853
    PSAPPSRV.5182 (0) [2013-09-19T11:56:57.842](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
    PSAPPSRV.5182 (0) [2013-09-19T11:56:58.068](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
    PSAPPSRV.5182 (0) [2013-09-19T11:56:58.134](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
    PSAPPSRV.5182 (0) [2013-09-19T11:56:58.142](0) Database Options: override_connection_reset: 0
    PSAPPSRV.5182 (0) [2013-09-19T11:56:58.144](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
    PSAPPSRV.5182 (0) [2013-09-19T11:56:58.145](0) Server failed to start
    PSADMIN.5107 (0) [2013-09-19T11:57:05.737](0) End boot attempt on domain PT853
    PSADMIN.4966 (0) [2013-09-19T18:55:48.131](0) Begin boot attempt on domain PT853
    PSAPPSRV.5009 (0) [2013-09-19T18:56:08.869](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
    PSAPPSRV.5009 (0) [2013-09-19T18:56:09.071](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
    PSAPPSRV.5009 (0) [2013-09-19T18:56:09.130](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
    PSAPPSRV.5009 (0) [2013-09-19T18:56:09.138](0) Database Options: override_connection_reset: 0
    PSAPPSRV.5009 (0) [2013-09-19T18:56:09.140](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
    PSAPPSRV.5009 (0) [2013-09-19T18:56:09.141](0) Server failed to start
    PSADMIN.4966 (0) [2013-09-19T18:56:16.253](0) End boot attempt on domain PT853
    PSADMIN.4966 (0) [2013-09-19T19:40:11.049](0) Begin boot attempt on domain PT853
    PSAPPSRV.6475 (0) [2013-09-19T19:40:26.633](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
    PSAPPSRV.6475 (0) [2013-09-19T19:40:26.731](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
    PSAPPSRV.6475 (0) [2013-09-19T19:40:26.776](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
    "~/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG" 64L, 7012C
    My question are:
    1) I have changed UserId from PSADMIN to MYNAME and password from PSADMIN to MYNAME in Application Server configuration, why the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN." ?
    2) I purge the cache and clean IPC resources of this domain and reboot this doamin, why the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN." ?
    3) How to solve the above issues ?
    Thanks.

  • How to create clustering on oracle application server on windows

    hi,
    i want to know how can i create clustering on oracle application server on windows machine.
    regards

    I think that you need to configure Web cache for this as a frontend, and two or more servers behind it.
    Try to read :
    Metalink DOC ID 312834.1
    http://www.oracle.com/technetwork/developer-tools/forms/documentation/advancedformsconf-128186.pdf
    Edited by: Marcos_Pawloski on 15/12/2010 00:02

  • Application Server on Windows for Production Database on iSeries

    Hi,
    We have installed Application server on Windows AMD64 for our Production server on iSeries running ECC5.0.
    When the application server is started it blocks all the users from logging in. SQL 913 errors are encountered. Though, the CPU usage rate falls down considerably on the Central Instance, it throws dumps like DBIF_RTAB_SQL_ERROR, RUNT_ILLEGAL_SWITCH, RAISE_EXCEPTION etc.
    For  RUNT_ILLEGAL_SWITCH dump, short text is:
    Internal error: Unexpected status in ABAP/4 runtime environment.
    Kindly help on this.
    Regards,
    Sai R.

    Hi Sai
    Make sure you have installed iSeries Access for windows client on the Windows AMD64 box
    plus you have the latest xda interface as mentioned in the infoAPAR...
    The current 64-bit XDA version is: 11.64.0.4  for V5R4...
    http://www-912.ibm.com/n_dir/nas4apar.NSF/1be1a5b61b213a6c86256c23007048f4/f3f937c16e67d42a862571070042042b?OpenDocument&Highlight=0,ii14126
    Also try shutting down both the CI plus the App and then try deleting the SQL packages , then restarting SAP...
    Hope that helps...else send detailed logs of the wp...
    Thanks
    Abhi

  • Oracle 9i R1 application server With Windows 2003 server

    Hi all,
    I am Getting error (Web Forms can install only Windows NT/2000) When installing Oracle 9i R1 application server in Windows 2003 SP1.
    is any specific setting or workarounds available to install in Windows 2003 Server?.
    Abk

    setup.exe -ignore sysprereqs this may work because it will detect that you dont have the appropiated OS, but it will ignore under your responsability and keep installing.
    Also you may try to modify the oraparam.ini in the install folder, and add some lines for the Windows version that you have, but this is more difficult, because you should use the exact name of the Version in order to pass this check.
    Regards.
    Edited by: Roberto Barrera on Jan 22, 2009 10:02 AM

  • Error while configuring application server in Jdev 11g

    Hi all,
    I am trying make connection to application server in Jdev 11g.
    While testing the connection i am facing the below error.
    Testing JSR-160 Runtime ... failed.
    Cannot establish connection.
    Testing JSR-160 DomainRuntime ... skipped.
    Testing JSR-88 ... skipped.
    Testing JSR-88-LOCAL ... skipped.
    Testing JNDI ... skipped.
    Testing JSR-160 Edit ... skipped.
    Testing HTTP ... failed.
    Unable to open conection: Connection timed out: connect
    Testing Server MBeans Model ... skipped.
    Testing HTTP Authentication ... failed.
    Unable to open conection: Connection timed out: connect
    0 of 9 tests successful.
    The Port which i am using is 45701. Any pointers on this?

    Hi
    You can find the SSL port of the Admin Server using the Admin Console (eg, http://localhost:7001/console).
    Environment -> Servers
    Click AdminServer(admin)
    SSL Listen Port: 7002 (default).
    You should check the "SSL Listen Port Enabled" check box to connect to this admin server with ssl port.
    For your informationWhen you configure the Application Server Connection from the JDeveloper, you need to check the 'Always use SSL' check box and enter the SSL port. You can create the Application Server Connection for your sSSL port from the JDeveloper.

  • Place file in central instance(AIX/UNIX) from Application server in Windows

    Hi guys,
    We have the central instance running in AIX and app servers in AIX/UNIX as well. now we want to replace the app server by windows server.
    so central instance remain as AIX/unix server and app server becomes Windows NT.
    then how can i place a file in my central instance while using this Windows based app server... because open dataset with forward slash (/usr/sap/) will be not be interpretated by windows,
    so i used logical file name.. and kept both windows and unix path..
    unix path as /usr/sap/tmp/<File_Name>
    and windows path as
    servername\usr\sap\tmp\ and even tried with
    usr\sap\tmp\
    nothing worked.. when i used open dataset fetching the path from logical path, it ways unable to open the file..

    Hi,
    you can't directly open file on central instance if you are not connected to it. You have access only to files which are on application server which you are connected to. If you want to have a folder which will be accessible from all application servers then you need to map folder on application server to folder on central instance.
    To solve the issue with different paths for different operating systems you can use transaction FILE. Here you can define a logical filename where you can configure different paths for different syntax groups such as UNIX or WINDOWS NT. You can use FM FILE_GET_NAME to get valid path for application server.
    Cheers

  • Application Server on Windows 2003 - 32bit / 64bit queries

    Hi
    We have a 10g forms application that we wish to deploy on 64bit AMD opteron architecture machines.
    We need to deploy on Windows 2003 Server.
    From Metalink, I understand that Infrastructure Installation is not supported on the 64bit version of Windows, which means deploying on 32bit Windows 2003 installed on the Opteron.
    This leads me to two questions:
    1) Has anyone experienced any significant platform specific issues with running Application Server on 32bit Windows 2003 on a 64 bit Opteron platform (over and above 32bit OS on a 32bit platform)?
    2) 32bit processes are limited to a maximum of 4Gb address space. I understand that the Forms Server on Windows uses a single process with multiple threads to service forms sessions. Does this mean that an individual forms server may only service clients up to a 4Gb (or lower?) memory limit regardless of the Physical memory installed on the box? Or is it possible to configure multiple forms processes within a single Forms server to make use of more physical memory?
    Thanks
    Steve

    Hi,
    I have to install OAS 10g R2 (infrastructure, midtier) on my local machine
    no database needed, which steps to follow to ensure that my installation was a success
    i was asked to do this in 3 days
    Thanks,
    Begoña.

  • Where do configure Application server Home.

    Hi All,
    I am getting below exception while deploying rar file
    <18-Jun-2009 9:21:43 o'clock AM EDT> <Warning> <Connector> <BEA-190032> << jca/SnmpConnectionFactory > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: Application Server Home: null is not properly configured! ">
    <18-Jun-2009 9:21:43 o'clock AM EDT> <Warning> <Connector> *<BEA-190024> << jca/SnmpConnectionFactory > Error making initial connections for pool. Reason: javax.resource.ResourceException: Application Server Home: null is not properly configured!>*
    <18-Jun-2009 9:21:43 o'clock AM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ConnectorApplicationOverviewPage&ConnectorApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DsnmpAdapter%2CType%3DAppDeployment%22%29.>
    So, please let me know how/Where do we can configuration the Application Server Home.
    Thanks in advance.
    Suresh

    Not sure that I fully understand how you want to send mail, but if you are looking to have portlets, servlets, jsp's, etc... send mail, then you should look at the javax.mail APIs. If you are on a using a unix/linux type server, and you want mail regarding low level OS stuff, then you should look at sendmail or whatever your local mail package is.

  • HFM server configuration - Application Server Clusters Issue

    Hi,
    When I am tryin to get into the second tab (Application Server Clusters)of the HFM configuration utility(server and webconfigurtion):
    I am getting the below ERROR
    +" There must be a valid Database Connection in order to set Application Sever Clustering. Please check and apply a working UDL file."+
    Database and server I am using:_
    I have Oracle database: Oracle Enterprise Manager Version 9.2.1.0
    on Windown 2003 SP1 server
    I created a UDL file and also tested it. The test connection was successful. I am using the provider for udl: "Microsoft OLE DB Provider for Oracle)
    +PS: I am through with the first tab "Application Server"..+
    Belolw is the log.. may be this will be useful.
    Error*11*Administrator*11/09/2009 10:47:08*CHsxHFMConnection.cpp*Line 909*<?xml version="1.0"?>
    <EStr><Ref>{DFCB5E4F-0940-4993-84A1-1F7568F670CB}</Ref><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147220956</Num><Type>1</Type><DTime>11/9/2009 10:47:08 AM</DTime><Svr>HFMSERVER</Svr><File>CHsxHFMConnection.cpp</File><Line>909</Line><Ver>9.3.1.0.1502</Ver></ESec></EStr>
    Error*11*Administrator*11/09/2009 10:47:08*HfmADOConnection.cpp*Line 262*<?xml version="1.0"?>
    <EStr><Ref>{1290DF08-9EC5-45B5-B846-38EA0D58E2CE}</Ref><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147220956</Num><Type>1</Type><DTime>11/9/2009 10:47:08 AM</DTime><Svr>HFMSERVER</Svr><File>HfmADOConnection.cpp</File><Line>262</Line><Ver>9.3.1.0.1502</Ver><DStr>&lt;?xml version="1.0"?&gt;
    &lt;EStr&gt;&lt;Ref&gt;{DFCB5E4F-0940-4993-84A1-1F7568F670CB}&lt;/Ref&gt;&lt;User/&gt;&lt;DBUpdate&gt;1&lt;/DBUpdate&gt;&lt;ESec&gt;&lt;Num&gt;-2147220956&lt;/Num&gt;&lt;Type&gt;1&lt;/Type&gt;&lt;DTime&gt;11/9/2009 10:47:08 AM&lt;/DTime&gt;&lt;Svr&gt;HFMSERVER&lt;/Svr&gt;&lt;File&gt;CHsxHFMConnection.cpp&lt;/File&gt;&lt;Line&gt;909&lt;/Line&gt;&lt;Ver&gt;9.3.1.0.1502&lt;/Ver&gt;&lt;/ESec&gt;&lt;/EStr&gt;
    </DStr><PSec><Param>C:\Hyperion\FinancialManagement\Server Working Folder\hfmlink.udl</Param></PSec></ESec></EStr>
    Error*11*Administrator*11/09/2009 10:47:08*CHsxSQLHelper.cpp*Line 102*<?xml version="1.0"?>
    <EStr><Ref>{1290DF08-9EC5-45B5-B846-38EA0D58E2CE}</Ref><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147220956</Num><Type>1</Type><DTime>11/9/2009 10:47:08 AM</DTime><Svr>HFMSERVER</Svr><File>HfmADOConnection.cpp</File><Line>262</Line><Ver>9.3.1.0.1502</Ver><DStr>&lt;?xml version="1.0"?&gt;
    &lt;EStr&gt;&lt;Ref&gt;{DFCB5E4F-0940-4993-84A1-1F7568F670CB}&lt;/Ref&gt;&lt;User/&gt;&lt;DBUpdate&gt;1&lt;/DBUpdate&gt;&lt;ESec&gt;&lt;Num&gt;-2147220956&lt;/Num&gt;&lt;Type&gt;1&lt;/Type&gt;&lt;DTime&gt;11/9/2009 10:47:08 AM&lt;/DTime&gt;&lt;Svr&gt;HFMSERVER&lt;/Svr&gt;&lt;File&gt;CHsxHFMConnection.cpp&lt;/File&gt;&lt;Line&gt;909&lt;/Line&gt;&lt;Ver&gt;9.3.1.0.1502&lt;/Ver&gt;&lt;/ESec&gt;&lt;/EStr&gt;
    </DStr><PSec><Param>C:\Hyperion\FinancialManagement\Server Working Folder\hfmlink.udl</Param></PSec></ESec><ESec><Num>-2147220956</Num><Type>0</Type><DTime>11/9/2009 10:47:08 AM</DTime><Svr>HFMSERVER</Svr><File>CHsxSQLHelper.cpp</File><Line>102</Line><Ver>9.3.1.0.1502</Ver></ESec></EStr>
    Error*11*Administrator*11/09/2009 10:47:08*CHsxSystemConfig.cpp*Line 2508*<?xml version="1.0"?>
    <EStr><Ref>{1290DF08-9EC5-45B5-B846-38EA0D58E2CE}</Ref><User/><DBUpdate>1</DBUpdate><ESec><Num>-2147220956</Num><Type>1</Type><DTime>11/9/2009 10:47:08 AM</DTime><Svr>HFMSERVER</Svr><File>HfmADOConnection.cpp</File><Line>262</Line><Ver>9.3.1.0.1502</Ver><DStr>&lt;?xml version="1.0"?&gt;
    &lt;EStr&gt;&lt;Ref&gt;{DFCB5E4F-0940-4993-84A1-1F7568F670CB}&lt;/Ref&gt;&lt;User/&gt;&lt;DBUpdate&gt;1&lt;/DBUpdate&gt;&lt;ESec&gt;&lt;Num&gt;-2147220956&lt;/Num&gt;&lt;Type&gt;1&lt;/Type&gt;&lt;DTime&gt;11/9/2009 10:47:08 AM&lt;/DTime&gt;&lt;Svr&gt;HFMSERVER&lt;/Svr&gt;&lt;File&gt;CHsxHFMConnection.cpp&lt;/File&gt;&lt;Line&gt;909&lt;/Line&gt;&lt;Ver&gt;9.3.1.0.1502&lt;/Ver&gt;&lt;/ESec&gt;&lt;/EStr&gt;
    </DStr><PSec><Param>C:\Hyperion\FinancialManagement\Server Working Folder\hfmlink.udl</Param></PSec></ESec><ESec><Num>-2147220956</Num><Type>0</Type><DTime>11/9/2009 10:47:08 AM</DTime><Svr>HFMSERVER</Svr><File>CHsxSQLHelper.cpp</File><Line>102</Line><Ver>9.3.1.0.1502</Ver></ESec><ESec><Num>-2147220956</Num><Type>0</Type><DTime>11/9/2009 10:47:08 AM</DTime><Svr>HFMSERVER</Svr><File>CHsxSystemConfig.cpp</File><Line>2508</Line><Ver>9.3.1.0.1502</Ver></ESec></EStr>
    Can someone help me on this?

    This issue has been resolved.
    I was using the wrong proveder in the UDL file.
    The correct provider to be used is " Oracle Provider for OLE DB" - when we are running on Oracle database.
    Cheers..

  • Oracle Application Server 10.2 installation problem: Error in invoking targ

    Hi,
    I am installing Oracle Application server 10.2 in IBM AIX 6.1 and I encounter this error during the installation..
    Error in invoking target "install" of makefile
    I am in the linking part
    kindly help me out.
    thanks...

    This could be if you miss a library or package, did you follow any note to perform the installation?
    Have you read the notes in metalink about 6.1?
    There is some information about oracle Aplicaitons 12, even is not the same, the packages and filesets used to be the same. try to look for them.
    Greetings.

  • Anybody installed Oracle 10g application server on windows 2008 (64 bit) se

    Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.
    which version of OAS we should use?l. we are using dell server .
    regds
    santosh
    Edited by: user5429538 on Feb 24, 2010 2:59 AM

    Hi Santosh,
    Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.I dont think any version of Oracle Application Server is certified for windows 2008 yes.
    But, u can Install Oracle Application Server 10g Release 2 (10.1.2.0.2) on windows 2003 (64 bit) server
    Please refer below links for download and to check certification:
    http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
    http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
    http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html
    Hope helps
    Regards,
    X A H E E R

  • No Response From Application Server-how to overcome this error message

    I am Using Oracle 10g Application server. if we run a report from our front end - jsp , if the transaction takes more than 10 minutes then 'No Response From Application Server ' error message is coming in browser. How to over come this. whether i have to set any transaction time in application server. If anybody knows this kindly give reply immediatly.

    Can you provide additional background information? Is this a in-house application serviced through an OC4J container or a Report from the Middle Tier install?
    Is this request being front-ended by an OHS server? Are there firewalls involved?
    Regards.

Maybe you are looking for

  • Why No Support For HP hd7500s Personal Media Drive?

    I have a Personal Media Drive hd7500s (750 gb), installed in the equipment bay,  that my HP Pavillion has stopped recognizing.  There is power to the drive as indicated by the lights on the front.  General Troubleshooting info at this site suggests I

  • New-object itextsharp causes an error

    Hi, i am trying to use powershell to read a pdf document with the following code [System.Reflection.Assembly]::LoadFrom(".\itextsharp.dll") $reader = New-Object iTextSharp.text.pdf.PdfReader -ArgumentList ".\201408_issue.pdf" for ($page = 1; $page -l

  • Using Photoshop CS 6 and Premiere Elements 11

    I have Premiere Elements 11 and Photoshop CS 6.  I have using the Classroom in a Book to learn how to work Premiere Elements.  In chapter 12 you are supposed to use both Elements programs.  Is there any way to use CS 6 with Premiere Elements.  I don'

  • Yahoo mail

    Yahoo mail won't open it comes up with a message when I sign in saying go to settings - safari - private browsing and turn it off. I can't find private browsing to turn it off and should I turn it off.

  • Hundreds if not thousands of FOLIOS in one App

    Hello - we have purchased Adobe DPS Enterprise Edition and are developing a custom storefront for our App. The purpose of the App is going to be an artbook bookstore. My question is, we were told by our sales reps that beginning with v22, we would be