Configuring Parallel Concurrent Processing with ssh
Happy New Year,
Metalink Note 185489.1 describes setting up PCP so that the applmgr account on each node can rsh into the other apps tier nodes, but has anyone been successful in setting it up with ssh? I see that the last time this document was updated was in 2004, quite some time ago.
Sincerely,
Ted Persky
Sun Microsystems, Inc.
I have configured PCP in 11.5.10.2 having two application server with OS RHEL 4.0 as follows:
a. On node app1 check whether the apps_sid listener is up and if it is down bring it up.
b. Log in to the applications by system administrator responsibility and do the following steps:
1. Check whether both the nodes are registered by navigating to Install > Nodes and verify.
2. Navigate to Concurrent > Manager > Define and query for Internal Manager.
3. In the secondary node box enter the name of <node2> and save the changes.
4. Do the same for some other concurrent managers except Standard.
5. For some concurrent managers do the reverse i.e. enter aap2 as the primary node and app1 as secondary node.
6. Query whether service managers of the name Service Manager (<node2>) and Internal Monitor (<node2>) exists along with its <node1> counterparts.
7. For Service Managers and Internal Monitors of both app1 and app2 define a ‘Standard’ workshift (IMP- The workshifts are not defined by default for IMON/SM since the IMON is a feature exclusively for PCP).
8. Define a new concurrent manager of name Standard Manager2 with definitions same as that of a Standard Manager except that in the specialization rules form include a program, say, Active Users.
9. Exclude the Active User program from the specialization rules of the Standard Manager.
10. Stop and start the concurrent managers by executing the script adcmctl.sh.
11. Check whether the FNDSM and FNDIMON processes have started on both the nodes. It should be, otherwise it is indicative of miss-configuration.
12. Navigate to Concurrent > Manager > Administer form select the Standard Manager 2 and activate it.
13. After it has activated check from the back-end of the second node whether the desired FNDLIBR processes have been started. It should be, otherwise it is indicative of miss-configuration.
Regards,
Nitesh.
Similar Messages
-
Problems while enabling Failover with Parallel Concurrent Processing (PCP)
Hi,
I followed the following Note , to configure PCP :
From Note 743716.1 - How to Setup and Test Failover of PCP on Non-RAC Environments
Concurrent Managers configured :
ERPCON1
ERPCON2
On those 2 Nodes :
- APPLDCP is 'ON'
- s_cp_reviver is 'enabled' (See Note 466752.1 - What is FNDREVIVER and How Is It Set?)
-> Concurrent Managers have been started with REVIVER_PROCESS="enabled"
The following Patches have been applied :
- One-off Patch 6495206
- Patch 9074947
- One-off Patch 7295684 (See Note 727127.1)
Manager Setup :
Assuming the 2 CP nodes defined on the environment are Primary ERPCON1(CP,Admin)
and Secondary ERPCON2(CP)
the below table gives a snapshot of few of the Manager definitions used for the failover testing.
Manager Name : Internal Manager (ICM)
Primary Node : ERPCON1
Secondary Node : ERPCON2
Manager Name : Internal Monitor_ERPCON1
Primary Node : ERPCON1
Secondary Node : ERPCON2
Manager Name : Internal Monitor_ERPCON2
Primary Node : ERPCON2
Secondary Node : ERPCON1
Manager Name : Standard Manager
Primary Node : ERPCON1
Secondary Node : ERPCON2
Manager Name : Conflict Resolution Manager(CRM)
Primary Node : ERPCON1
Secondary Node : ERPCON2
Manager Name : Scheduler/Prereleaser Manager)
Primary Node : ERPCON1
Secondary Node : ERPCON2
Failover Tests :
- Shutdown Concurrent Managers , Listener on ERPCON1
-> No Failover on ERPCON2 !!!
No Concurrent Managers are starting on ERPCON2
Regards,
HarryHi Harry;
Is there any error message on CM logs? Please also see below note:
How to Activate Parallel Concurrent Processing - More Facts [ID 602899.1]
Regard
Helios -
Parallel concurrent processing
Hi All,
I need some information about parallel concurrent processing.
Anybody please help me and share your information and also give some links, documents and metalink note id regarding this.
Regards,
Ganesh
Trainee DBAI need some information about parallel concurrent processing.
Anybody please help me and share your information and also give some links, documents and metalink note id regarding this.We had this discussion many times in the forum before; please see old threads for details.
PCP
https://forums.oracle.com/forums/search.jspa?threadID=&q=PCP&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Parallel Concurrent Processing
https://forums.oracle.com/forums/search.jspa?threadID=&q=Parallel+AND+Concurrent+AND+Processing&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Oracle 12.1.3 Parallel Concurrent Processing Failover
I have installed / configured PCP on 12.1.3 Ebiz
When I stop the processes on the PRIMARY NODE, the processes on the secondary node stop also
I want the SECOND NODE to automatically take up the processing the the PRIMARY NODE was carrying out
Any ideas what I am doing wrong?
I have Primary / Secondary node defined at the Conc Manger level
I have it set for the Conflict Resolution manager also (how ever I only have CRM set for Primary node... do I need to set this for the secondary node also?)
My aim eventually is to LOAD BALANCE between the two nodes and then have the failover automatic
Anyone out there seen any blatant errors with what I have described?
Thanks969654 wrote:
I have installed / configured PCP on 12.1.3 Ebiz
When I stop the processes on the PRIMARY NODE, the processes on the secondary node stop also
I want the SECOND NODE to automatically take up the processing the the PRIMARY NODE was carrying out
Any ideas what I am doing wrong?This is an expected behavior when you stop the CM normally.
I have Primary / Secondary node defined at the Conc Manger level
I have it set for the Conflict Resolution manager also (how ever I only have CRM set for Primary node... do I need to set this for the secondary node also?)
My aim eventually is to LOAD BALANCE between the two nodes and then have the failover automatic
Anyone out there seen any blatant errors with what I have described?Please see old thread for the PCP failover docs you need to refer to -- https://forums.oracle.com/forums/search.jspa?threadID=&q=PCP+AND+Failover&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
COncurrent process fails with warning for OPP
Concurrent process generates xml output (version 5.6.2) .
When it tries to publish it , the log suggests checking out the OPP log.
The OPP log has a series of java entries for the request, including one of the type
Caused by: oracle.xdo.parser.v2.XPathException: Expected 'QNAME' instead of ''.
header of the OPP log says
Resolution History
18-OCT-06 20:36:05 GMT
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Informational Only:Warning Presented to Customer ###
You chose 'Other technical issues with this product' from the Type of Problem
list. This is a generic Service Request form which will require additional time
to be routed appropriately. You may be able to expedite the resolution of your
Service Request by doing the following: 1. Use your browser’s back button to
return to the Create a SR – Brief Description page. 2. Select an option from
the Type of Problem list that more closely describes the problem.
### Requested files:ACT(Note 183274.1),RDA (Note 175853.1). Files to be loaded.
None
### Detailed Problem Statement ###
Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
Attached are OPP Manager log file, Screen shot of 'Preview' output jjst before
submitting request. Also log file of failed concurrent request which contains
standard error " See OPP Service log file for more".
### Steps to Reproduce Problem ###
Registered a concurrent process with XML template , and running the process
from Receivables Manager responsibility.
Ran concurrent process for 1) Standard RAXINV report , with output method as
'XML'. 2) Customised RAXINV report, with output method as 'XML'
### Instance Name(s) and Type of System(s) Where Error Occurs ###
Lunix, 11.5.10 on 10g
### Recent Changes to this Environment ###
None
### Workarounds Used ###
None
### How is this Issue Impacting Your Business ###
Business is readying for CRP3, so would like to have reports ready by then.
Contact me via : MetaLink
18-OCT-06 20:48:07 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XML_Pub1.bmp
18-OCT-06 20:49:14 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XMLPublisher_java.t
xt
18-OCT-06 21:17:26 GMT
Hi Bashobi,
Thank you for using MetaLink. We are currently reviewing/researching the situation and will update the SR as soon as we have relevant information
Best Regards,
Bill
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
18-OCT-06 21:18:04 GMT
Email Update button has been pressed: Sending email to [email protected].
18-OCT-06 21:21:45 GMT
ISSUE CLARIFICATION
====================
On 11.5.10.2 in Production:
Find concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
EXPECTED BEHAVIOR
Expect the processes run successfully
STEPS
The issue can be reproduced at will with the following steps:
1. Registered a concurrent process with XML template .
2. Run the process from Receivables Manager responsibility.
3. Ran concurrent process for
1) Standard RAXINV report , with output method as 'XML'
2) Customised RAXINV report, with output method as 'XML'
BUSINESS IMPACT
The issue has the following business impact:
Business is readying for CRP3, so would like to have reports ready by then.
ACTION PLAN
============
Hi Bashobi,
1. Can you reproduce the issue from sysadmin responsibility with Active users report? if yes
please upload OPP log file after reproduce it and upload the request log file.
Thanks.
18-OCT-06 23:09:02 GMT
New info : [email protected] : Did the same as suggested, Request
completes successfully.
But what is the relation between Active Users report and a report sent via XML
Publisher?
19-OCT-06 15:54:26 GMT
ACTION PLAN
============
Hi Bashobi,
1. When you reproduce the issue from sysadmin responsibility with Active users report change the format out put to XML,
Save your change:
2. Upload OPP manager log file and upload the request log file.
Thanks,
Bill.
19-OCT-06 15:54:33 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 16:42:23 GMT
New info : [email protected] : Bill,
No, I could not reproduce the problem with Active Users program.
Attaching OPP manager log in the next update. Bashobi
19-OCT-06 17:05:07 GMT
New info : [email protected] : Bill, Attaching internal log and manager
log
Bashobi
19-OCT-06 17:06:08 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_internal_log.tx
t
19-OCT-06 17:07:10 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_manager_log.txt
19-OCT-06 18:14:32 GMT
UPDATE
=======
Hi Bashobi,
Thank you for providing the requested information.
Best Regards,
Bill
STATUS
=======
@WIP -- Work In Progress
19-OCT-06 18:14:36 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 18:59:25 GMT
DATA COLLECTED
===============
SCREEN SHOTS
XML_Pub1.bmp:
Error:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
LOG FILE
1. XMLPublisher_java.txt:
[10/18/06 11:16:57 AM] [5670:RT277479] Completed post-processing actions for request 277479.
[10/18/06 11:29:06 AM] [OPPServiceThread1] Post-processing request 277488.
[10/18/06 11:29:06 AM] [5670:RT277488] Executing post-processing actions for request 2
77488.
[10/18/06 11:29:06 AM] [5670:RT277488] Starting XML Publisher post-processing action.
[10/18/06 11:29:06 AM] [5670:RT277488]
Template code: XXBE_TEST_INV
Template app: AR
Language: en
Territory: US
Output type: null
[10/18/06 11:29:07 AM] [UNEXPECTED] [5670:RT277488] java.lang.reflect.InvocationTarg
etException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
10/18/06 11:29:07 AM] [5670:RT277488] Completed post-processing actions for reque
st 277488.
2. OPP_manager_log.txt:
[10/19/06 5:22:36 AM] [main] Starting GSF service with concurrent process id = 5688.
[10/19/06 5:22:36 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/19/06 5:22:37 AM] [Thread-12] Service thread starting up.
[10/19/06 5:22:37 AM] [Thread-13] Service thread starting up.
ISSUE VERIFICATION
=================
Issue veryfied by the screen shots: XML_Pub1.bmp which shows:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
ACTION PLAN
============
Hi Bashobi,
1. Since you can not reproduce the issue from sysadmin responsibility can we say the issue specific to Receivables Manager
responsibility<INV xml report>?
2. You said before: "Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.":
Is the above mean :
-The xml publisher report completed but you can not view the whole XML file
-Or the xml publisher report error out with "Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob.."
Thanks.
19-OCT-06 18:59:32 GMT
Email Update button has been pressed: Sending email to [email protected].
20-OCT-06 21:36:13 GMT
Email Update button has been pressed: Sending email to [email protected].
24-OCT-06 21:50:06 GMT
New info : [email protected] : Hi,
We are in the process of upgrading XML Publisher at the moment. I would like to
wait a day or two to test the report with the upgrade.
Thanks,Bashobi
26-OCT-06 20:15:07 GMT
New info : [email protected] : Hi,
Our DBA has applied the 5.6.2 patch on our dev instance. My concurrent process
runs to a warning.
The warnings in the OPP manager log file say
Template code: BE_RAXINV
Template app: XXBE
Language: en
Territory: US
Output type: PDF
[10/26/06 12:50:13 PM] [UNEXPECTED] [5849:RT281617]
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea?Hi All,
I have ran into the same issue.
"The Output Post-processor is running but has not picked up this request.
Any ideas.
Thanks
Ravi -
Reuirements to setup parallel concurren processing in r12
Dear All,
Can anyone please tell me what are the requirements to setting up parallel concurrent processing in R12?
Thanks in advance.
-Regards,
SenthilSenthil,
Please refer to chapter "Defining Concurrent Managers" section "Overview of Parallel Concurrent Processing" in "Oracle Applications System Administrator's Guide - Configuration" manual.
Oracle Applications System Administrator's Guide - Configuration
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120sacg.pdf
Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=384248.1 -
How to configure number of concurrent processes in XI?
Hi experts,
I have a simple interface:
FILE -> XI -> FILE
The input file is a huge file containing thousands of records.
XI will split the huge input files, so that each record gets written to one file each.
Owing to the huge number of files being generated, I have many messages in status = "To Be Delivered" in the RWB.
When I do a filter for status = "Delivering", I see 4 messages in that status. (Of course the message IDs will differ from time to time, but at any point in time, I can only see 4 messages with the status = "Delivering").
How can I increase the number of concurrent processes that produces the output files?
Please advise.
Thanks.
RonRon,
From this perfromance tuning guide , page 12 ,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
<i>The Adapter Framework requires a set of fixed application threads within the J2EE Engine for proc-essing different internal messaging queues (AFW queue, BC Adapter, CIDX Adapter, and so on). Ad-ditionally, certain channel configurations also require a fixed set of application threads (for example, RFC sender channel, File adapter channels). This may require a higher number of application threads. Therefore, within the J2EE Engine configuration (configtool or Visual Admin), go to:
Global Configuration -> Server -> Kernel -> ApplicationThreadManager
Set the MaxThreadCount property to 300</i>
Not sure if this is the exact property but this is sure worth giving a shot.
Regards
Bhavesh -
Hi there,
I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
For Send port: 1. we would need to encrypt the file with our business partners public key
2. sign the file with our private key.
3. Send the file through to SSH client which eventually transfers to Remote server.
Receive port: 1. Connect to SSH Server with SSH-2 key and receive the file
2. Verify the file's digital signature agaisnt the Business partners PGP public key
3. Decrypt the file using our PGP Public key
Thanks in advanceYes it is supported.
You can find its documentation in this link
You can find section X.509 Certificate Identity Keys
You can set public and private key in property SSH Identity thumbprint of send and receive port
I prefer to test it using client tool like
FileZilla or WinSCP then test it using sftp adapter
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer -
Parallel process with a queue and file?
Hello, first of all sorry for my bad english^^:
I am working for days on my project where I have to show the parallel process while transfering information by different ways and their problems (like timing and so on).
I chose the transmission of information to a parallel process by (1) a queue, and by (2) a file (.txt). (other ways are welcome, do you have 1-2 other ideas?)
To solve this problem I made three while loops, the first one is the original one, where the original information (as a signal) is created and send by queue and file to the other two while loops, where this information is getting evaluted to create the same signal.
so in the end you can compare all signals, if they are the same - so that you can answer the question with the parallelity of process.
but in my vi file i have some problems:
the version with the queue works pretty fine - it's almost parallel
but the version with file doesn't work parallel, and i have no idea how i can solve it - -
i'm a newbie^^
can someone correct my file, so both (file and queue version) run parallel with the original one, or tell me what i can or must do?
Attachments:
Queue_Data_Parallel_FORUM.vi 23 KBLapLapLap wrote:
Hello, first of all sorry for my bad english^^:
I am working for days on my project where I have to show the parallel process while transfering information by different ways and their problems (like timing and so on).
I chose the transmission of information to a parallel process by (1) a queue, and by (2) a file (.txt). (other ways are welcome, do you have 1-2 other ideas?)
To solve this problem I made three while loops, the first one is the original one, where the original information (as a signal) is created and send by queue and file to the other two while loops, where this information is getting evaluted to create the same signal.
so in the end you can compare all signals, if they are the same - so that you can answer the question with the parallelity of process.
but in my vi file i have some problems:
the version with the queue works pretty fine - it's almost parallel
but the version with file doesn't work parallel, and i have no idea how i can solve it - -
i'm a newbie^^
can someone correct my file, so both (file and queue version) run parallel with the original one, or tell me what i can or must do?
A queue is technically never parallell, though you can have several if you really need parallellism. Other methods include Events, Action Engines, Notifiers (and why not webservices) for information transfer between processes.
Due to limitations in the disk system you can only read/write one file at a time from one process, so i wouldn't recommend that. If you use a ramdisk it might work.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV -
CiscoWorks:Archieve configurations of routers/switches with only ssh/telnet
Hi,
I want to do the archieve configurations of couple of routers/switches with only ssh/telnet and rest thousands of devices will be via snmp.
Currently I am backing up the configurations of thoudands of routers/switches via snmp, as snmp is configured on them, but couple of routers/switches are external and snmp is not configured on them so I want to get their configuration via ssh/telnet only.
Please advise me that is it possible to do the archieve configurations of routers/switches with only ssh/telnet?
I am using the
LMS: 1.2.0
RME: 4.3.0
CS: 3.3.0
CM: 5.2.1
DFM: 3.2.0
ThanksThe config archive protocol order applies to all devices universally. Since you are using TFTP for most of your devices, I recommend you leave TFTP at the top of the protocol order list. Add TELNET and SSH below TFTP. The external devices will be attempted with SNMP/TFTP, but those operations will fail. RME will then fall back to TELNET then to SSH. It will eventually fetch the configuration successfully.
-
Single queue: concurrent processing of messages in multiple consumers
Hi,
I am new to jms . The goal is to process messages concurrently from a queue in an asynchronous listener's onMessage method by attaching a listener instance to multiple consumer's with each consumer using its own session and running in a separate thread, that way the messages are passed on to the different consumers for concurrent processing.
1) Is it ossible to process messsages concurrently from a single queue by creating multiple consumers ?
2) I came up with the below code, but would like to get your thoughts on whether the below code looks correct for what I want to accomplish.
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.Properties;
import javax.jms.Connection;
import javax.jms.ConnectionFactory;
import javax.jms.Destination;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.MessageConsumer;
import javax.jms.MessageListener;
import javax.jms.Session;
import javax.jms.TextMessage;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import com.walmart.platform.jms.client.JMSConnectionFactory;
public class QueueConsumer implements Runnable, MessageListener {
public static void main(String[] args) {
// Create an instance of the client
QueueConsumer consumer1 = new QueueConsumer();
QueueConsumer consumer2 = new QueueConsumer();
try {
consumer1.init("oms","US.Q.CHECKOUT-ORDER.1.0.JSON"); //US.Q.CHECKOUT-ORDER.1.0.JSON is the queue name
consumer2.init("oms","US.Q.CHECKOUT-ORDER.1.0.JSON");
}catch( JMSException ex ){
ex.printStackTrace();
System.exit(-1);
// Start the client running
Thread newThread1 = new Thread(consumer1);
Thread newThread2 = new Thread(consumer1);
newThread1.start();newThread2.start();
InputStreamReader aISR = new InputStreamReader(System.in);
char aAnswer = ' ';
do {
try {
aAnswer = (char) aISR.read();
catch (IOException e)
// TODO Auto-generated catch block
e.printStackTrace();
} while ((aAnswer != 'q') && (aAnswer != 'Q'));
newThread1.interrupt();
newThread2.interrupt();
try {
newThread1.join();newThread2.join();
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out
.println("--------------------exiting main thread------------------------"+Thread.currentThread().getId());
System.exit(0);
// values will be read from a resource properties file
private static String connectionFactoryName = null;
private static String queueName = null;
// thread safe object ref
private static ConnectionFactory qcf = null;
private static Connection queueConnection = null;
// not thread safe
private Session ses = null;
private Destination queue = null;
private MessageConsumer msgConsumer = null;
public static final Logger logger = LoggerFactory
.getLogger(QueueConsumer.class);
public QueueConsumer() {
super();
public void onMessage(Message msg) {
if (msg instanceof TextMessage) {
try {
System.out
.println("listener is "+Thread.currentThread().getId()+"--------------------Message recieved from queue is ------------------------"
+ ((TextMessage) msg).getJMSMessageID());
} catch (JMSException ex) {
ex.printStackTrace();
public void run() {
// Start listening
try {
queueConnection.start();
} catch (JMSException e) {
e.printStackTrace();
System.exit(-1);
while (!Thread.currentThread().isInterrupted()) {
synchronized (this) {
try {
wait();
} catch (InterruptedException ex) {
break;
* This method is called to set up and initialize the necessary Session,
* destination and message listener
* @param queue2
* @param factoryName
public void init(String factoryName, String queue2) throws JMSException {
try {
qcf = new JMSConnectionFactory(factoryName);
/* create the connection */
queueConnection = qcf.createConnection();
* Create a session that is non-transacted and is client
* acknowledged
ses = queueConnection.createSession(false,
Session.CLIENT_ACKNOWLEDGE);
queue = ses.createQueue(queue2);
logger.info("Subscribing to destination: " + queue2);
msgConsumer = ses.createConsumer(queue);
/* set the listener */
msgConsumer.setMessageListener(this);
System.out.println("Listening on queue " +queue2);
} catch (Exception e) {
e.printStackTrace();
System.exit(-1);
private static void setConnectionFactoryName(String name) {
connectionFactoryName = name;
private static String getQueueName() {
return queueName;
private static void setQueueName(String name) {
queueName = name;Hi Mark,
if the messages are sent with quality of service EO (=exactly once) you can add queues.
From documentation:
Netweaver XI -> Runtime -> Processing xml messages -> Queues for asynchronous message processing
...For incoming messages you set the parameter EO_INBOUND_PARALLEL from the Tuning category.
If more than one message is sent to the same receiver, use the configuration parameter EO_OUTBOUND_PARALLEL of the Tuning category to process messages simultaneously in different queues.
Transaction: SXMB_ADM
Regards
Holger -
Cisco 3650 tacacs+ with SSH works, not for http to use wireless GUI
Hi
Last week I installed a brand new Cisco 3650 switch and the wireless option.
Everything works fine.
I also configured tacacs+. Login through SSH works fine.
Now I want to manage the wireless part from the GUI bij entering https://ip-address/wireless
Local authentication with priv 15 works fine.
Now I configured tacacs. After entering username password I received a blank screen.
After debugging, I got a SSl failed.
Mar 4 07:35:53.675: eah: url=/wireless is for us with a secondary connection
Mar 4 07:35:53.675: eah: Secondary authentication required for realm priv_15_access
Mar 4 07:35:53.675: Tue, 04 Mar 2014 07:35:53 GMT <source address> /wireless auth_required
Protocol = HTTP/1.1 Method = GET
Mar 4 07:35:53.675:
Mar 4 07:35:53.799: %HTTPS: SSL read fail (-6992)
Mar 4 07:35:58.400: eah: url=/wireless is for us with a secondary connection
Mar 4 07:35:58.401: eah: Secondary authentication required for realm priv_15_access
Mar 4 07:35:58.401: HTTP AAA Login-Authentication List name: TACACS
Mar 4 07:35:58.401: HTTP AAA Login-Authentication List name: TACACS
Mar 4 07:35:58.401: TPLUS: Queuing AAA Authentication request 4673 for processing
Mar 4 07:35:58.401: TPLUS: processing authentication start request id 4673
Mar 4 07:35:58.401: TPLUS: Authentication start packet created for 4673(my username)
Mar 4 07:35:58.402: TPLUS: Using server <tacacs server IP>
Mar 4 07:35:58.407: TPLUS(00001241)/0/NB_WAIT/3AF752D4: Started 5 sec timeout
Mar 4 07:35:58.449: TPLUS(00001241)/0/NB_WAIT: socket event 2
Mar 4 07:35:58.450: TPLUS(00001241)/0/NB_WAIT: wrote entire 37 bytes request
Mar 4 07:35:58.450: TPLUS(00001241)/0/READ: socket event 1
Mar 4 07:35:58.450: TPLUS(00001241)/0/READ: Would block while reading
Mar 4 07:35:58.511: TPLUS(00001241)/0/READ: socket event 1
Mar 4 07:35:58.511: TPLUS(00001241)/0/READ: read entire 12 header bytes (expect 16 bytes data)
Mar 4 07:35:58.511: TPLUS(00001241)/0/READ: socket event 1
Mar 4 07:35:58.511: TPLUS(00001241)/0/READ: read entire 28 bytes response
Mar 4 07:35:58.511: TPLUS(00001241)/0/3AF752D4: Processing the reply packet
Mar 4 07:35:58.511: TPLUS: Received authen response status GET_PASSWORD (8)
Mar 4 07:35:58.512: TPLUS: Queuing AAA Authentication request 4673 for processing
Mar 4 07:35:58.512: TPLUS: processing authentication continue request id 4673
Mar 4 07:35:58.512: TPLUS: Authentication continue packet generated for 4673
Mar 4 07:35:58.512: TPLUS(00001241)/0/WRITE/3AFD3D3C: Started 5 sec timeout
Mar 4 07:35:58.512: TPLUS(00001241)/0/WRITE: wrote entire 26 bytes request
Mar 4 07:35:58.566: TPLUS(00001241)/0/READ: socket event 1
Mar 4 07:35:58.566: TPLUS(00001241)/0/READ: read entire 12 header bytes (expect 6 bytes data)
Mar 4 07:35:58.566: TPLUS(00001241)/0/READ: socket event 1
Mar 4 07:35:58.566: TPLUS(00001241)/0/READ: read entire 18 bytes response
Mar 4 07:35:58.567: TPLUS(00001241)/0/3AFD3D3C: Processing the reply packet
Mar 4 07:35:58.567: TPLUS: Received authen response status PASS (2)
Mar 4 07:35:58.656: HTTP: Priv level authorization success priv_level: 15
Mar 4 07:35:58.690: %HTTPS: SSL read fail (-6992)
Mar 4 07:35:59.096: eah: urlhook called for url=/favicon.ico
Mar 4 07:35:59.096: eah: Not for us
Mar 4 07:35:59.096: eah: urlhook called for url=/favicon.ico
Mar 4 07:35:59.096: eah: Not for us
Mar 4 07:35:59.096: eah: urlhook called for url=/favicon.ico
Mar 4 07:35:59.096: eah: Not for us
Mar 4 07:35:59.097: eah: urlhook called for url=/favicon.ico
Mar 4 07:35:59.097: eah: Not for us
Mar 4 07:35:59.097: eah: urlhook called for url=/favicon.ico
Mar 4 07:35:59.097: eah: Not for us
Mar 4 07:35:59.097: eah: urlhook called for url=/favicon.ico
Mar 4 07:35:59.097: eah: Not for us
Mar 4 07:35:59.097: eah: urlhook called for url=/favicon.ico
Mar 4 07:35:59.097: eah: Not for us
Mar 4 07:35:59.097: eah: urlhook called for url=/favicon.ico
Mar 4 07:35:59.097: eah: Not for us
So authentication seems fine to me.
Do I miss something in the ACS server?
Configuration for ip http login:
ip http secure-server
ip http authentication aaa login-authentication TACACS
ip http authentication aaa exec-authorization TACACS
ip http authentication aaa command-authorization 15 TACACS
Thanks!hi Erik,
command auth is not supported for GUI for the IOS-XE boxes.
Also can you try dong the following to check if this is a config issue.
I see that you have used TACACS as a method-list. Can you try using “default”?
To use “default”, you need to maje the following changes.
Aaa authentication login default group <server-grp>
Aaa authorization exec default group <server-grp>
On the http front, remove all the commands that you have configured below and only have this
Ip http authentication aaa
Can you paste the o/p of the folllowing commands?
sh run | sec http
sh run | sec aaa
Does http work instead of https? -
Concurrent processing status down in OAM
Hi ,
From OAM->Applications Dashboard ->Overview
the status for concurrent processing shows down but infact it is up
I also checked from OAM->Hosts->view configuration
whereas here the status for concurrent processing is up.
thanks all in advance..
applications version: 11.5.10.2Hi,
Please see if these documents help.
Note: 405375.1 - OAM Reports 'Internal Concurrent Manager Found Node To Be Down.' When Node is Up
Note: 419823.1 - OAM: Web Components Status: Shows Down Even When The System Works Fine
Note: 309271.1 - Web Components Status in OAM Shows All Down Even When the System Works Fine
Note: 434569.1 - OAM application dashbord shows all the web components with status down whereas they are up
Note: 287415.1 - Host Status In Application Dashboard Overview Tab Shown As Down in OAM
Regards,
Hussein -
OEM12C BP1 Default preferred credentials with SSH key credentials ?
Is it possible to configure Host Default Preferred Credentials to use a named credential created with SSH Key credentials ?
The drop down list only lists credentials configured with host credential types.host target type has 2 out of the box credential set HostCredsNormal and HostCredsPriv
And both these are of type HostCreds (Username and password)
And there's code which assumes these to be of type HostCreds and process password.
Hence these are left as is.
What customers can do is, create additional credential set (emcli create_credential_set) and use HostSSHCreds type for it. -
Oracle spawning parallel 128 processes when queried from Cognos
Hi,
I am querying a parallel enabled table with DOP set to default. Oracle 11.2 is installed on a 16 core machine while Cognos sits on a 4 core linux system. When querying the same table fromToad, I observe 32 parallel processes. Any thoughts as to why the difference and why that many number of processes get spawned from Cognos?
ThanksWhat and what are you runnng and how are they configured?
I ask this because what you are seeing could be as a reulst of so many factors.
An example is that if you are using Planning Contributor, then you are likely to have more processes reading and writing to the database at the same time. The number of processes will then depend on serveral issues. For instance the number of CPUs on the box, the number of Contributor Applications, the number of Publish Containers and the interval the jobs are configured to run. Using a scenario where you have a single monitorin job on a 2 cpu box for 10 Contributor Applications. Ths may spawn up to 20 processes. To make things worse, if you happen to have some of the previous 20 processes not completing before the next job interval, then it adds more to the number you see.
Maybe you are looking for
-
Can I get a boot disk that will boot windows vista without loosing what I have on my hard drive? L305-S5921.
-
Custom Fast formula for Time Entry Rule in OTL
Hi, i have created custom validation for time entry rules. I need to validate where Project and task fields are null or not? If Yes, it has to fire the custom message that i have mentioned in function. Please check the below code and help me whether
-
'Internet Connect' keeps coming up
My internet was down all day yesterday (SBC-Yahoo DSL). Today it is back up. All morning I continue to get the 'Internet Connect' box that comes up and asks if I would like to keep the connection. My 'Location' is set to 'Automatic' and the 'Show' is
-
IWeb wont publish movie ... changes it to a jpeg pict
I have a movie page and when I publish to a folder and see the media folder, the movie isnt there. It looks like the movie is being changed to a single photo JPG, as i see it in the WebPage Folder ... but no video or .mov file. help?
-
Do you have to delete current (CS6) Illustrator preferences on Mac Os X?
I have recently purchased the Adobe Illustrator CS6 program & Adobe CS6 Classroom in a Book. I am familiar with the Adobe InDesign & Adobe Photoshop programs, but I have never had to restore/delete default preferences. I was able to locate the Adobe