Configuring SMTPPlugin for sending mail to Internet

Hi I have a WEB 640 system, and i need to send SMTP mails to yahoo and other internet smtp adresses via Lotus Domino server which is on the Internet.
Steps done to send mail:
1. In RZ10, Instance profile :- icm/server_port_1 with value: PROT=SMTP,PORT=8025,TIMEOUT=180
2. go to sicf and enable smtp node (sapconnect)
3. create a user "smtp_user" as service user and attach profile "s_a.scon"
4. in sicf, double click the sapconnect node and maintain the service tab for logon data details
5. under scot, maintain the domain name, and schedule a job for processing the mails
On trying to send a mail to an internet mail address the following error occurs:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 505 505Authentic
I understand that something needs to be done on Lotus domino server. Can anyone suggest if either anything else is required in SAP or something that needs to be done on lotus domino.
Any inputs / help is highly appreciated.
Thanks,
Chetan

Hello Chetan,
you have done the configuration for incoming emails to the SAP Server. You have to configure outgoing mail in transaction SCOT.
To test if the Domino Server accepts SMTP to send emails try "telnet <DominoServerIP> 25" and this commands:
helo Domino
mail FROM: <[email protected]>
rcpt TO: <[email protected]>
data
TEst
Regards
Gregor

Similar Messages

Sending mail to Internet address from SAP system

Hi...
My requirement is to send a mail to an internet address say ABC@companyid from SAP.
I have used a FM So_New_Document_Send_API1 for the purpose.For this I have provided
             e_mailrec-receiver = w_emailid.
              e_mailrec-rec_type = 'U'.
              APPEND e_mailrec.
But I get an error msg in SOST, that the route from (SAP server) to (mail id) not found.
Instead of internet address when I give rec_type as B i.e. SAP USER it sends a mail to my SAP inbox.
I have also checked SAPConnect, and it is fine.
Is the above FM only for sending mails to SAP id, then wats the FM for sending mails to internet address? Its just sending a 1 line mail without attachment.
P.S: I have gone through search in sdn so please don't provide me with links to other threads.
Reply only if you can actually help and know wats this about.
Thnaks and Regards.

These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
Send new document
For Code
http://www.forum.saptechies.com/viewtopic.php?t=5562

Alerts for sending mails

Hi all;
i am configuring alerts for sending mails . i am on XI 7.0 SP 2.i am not able to find an option like internal processing in ALRTCATDEF settings configurations.
Can this be the reason why mails are not getting send.

Hi Mudit,
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered.
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
Also, to test your Alerts, execute the report RSALERTTEST in SE38.
Also go throuh the following links...
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
Regards,
Abhy
Message was edited by: Abhy Thomas

TS1307 I am holidaying in Auckland using my daughters orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says orcon offline. I have spent half an hour with Orcon putting in correct

I am holidaying in Auckland using my daughter's Orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says mail.orcon.net.nz(Offline). I have spent half an hour with Orcon putting in correct info. They do not know how to help me further and neither does telstra clear, my own internet provider.
Any advice appreciated.

On the Mail menubar > Mailbox, make sure Take all accounts online is selected.

How to configure users for internal mail routing only

Hi Guys!
I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only (cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex. [email protected],[email protected],[email protected]) instead they will use the [email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
Thank you.
regards,
LRMCP

Hi LRMCP,
Procedure is perfect which is given by Benoit, just elaborating steps.
Prevent form Sending Mails:
Create a transport rule on Hub Transport Server:
Organization Configuration -> Hub Transport -> Transport Rules -> New Transport Rule -> Give Name “Group2 - No Internet Mail”
Conditions: select "From a member of a distribution list" & select group "Group2"
Select another condition "Sent to users inside or outside the organization" & Select Outside.
Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”
Prevent from Receiving Mails:
New User: You can select “require that senders are authenticated” while creating new users which will stop receiving mails from internet.
User -> properties -> Mail Flow Settings -> Message Delivery Restrictions -> Properties -> set Sender Authentication.
For Existing Users:
You have already a group named "Group2" so set sender authentication for all members with this single command.
Get-DistributionGroup "Group2" | Set-Mailbox -RequireSenderAuthenticationEnabled $true
Same procedure mentioned for group2 can be followed for Group3 to prevent from sending mails.
Amit Tank || MVP - Exchange || MCITP - Exchange 2007 || http://ExchangeShare.WordPress.com

How to configure users for internal mail routing only in exchange 2013

Hi Guys!
I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only
(cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex.
[email protected],[email protected],[email protected]) instead they will use the
[email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
Thank you.
regards,
Paul

Hi Paul,
Great advice from Maganti, just elaborating steps:
Prevent Group 2 send e-mail to internet by transport rule:
1. Login EAC with administrator, Mail Flow---> Rule, click “Create a new rule, then give a name “Group2 - No Internet Mail”.
2. Conditions: select "From a member of a distribution list" & select group "Group2"
3. Select another condition "Sent to users inside or outside the organization" & Select Outside.
4. Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”.
Prevent Group 3 directly send e-mail to internet, however it can send message as group:
We also can create a transport rule which is same with Group2, then open Active Directory Users and Computers to add send as permission with another group (contain same users as group3).
Best Regards,
Allen Wang

Maximum retries for sending mail ( java mail api )

Hi,
How can I set the property "maximum retries for sending mail" for my smtp through java mail api ?
Is there any property that I need to set in the Javamail session or any other way out ?
Thanks.

That's a server property. You would set that in your server configuration. JavaMail is for sending and receiving mail, not for controlling mail servers.

Problem assigning an account for sending mail from external mail app

Good morning , i have an IPhone 4s 16gb with IOS 7.0.6 and even in setting-mail and calendar i have setup the default account to use for sending mail outside mail app it use ICloud mail account.
if i select Icloud account and then my gmail account sometimes works but after some days it start again to use the other account...i don't know if it is when i power off the IPhone...if i look into settings-mail and calendar account selected is gmail even the account used is the ICloud.
i think is a IOS bug.
please let me know.
Best regards

Jun T. wrote:
But there is a (high) possibility that Gmail's server requires authentication (or certification) to connect to it.
I wonder if they're simply silently dropping emails in certain cases. I forgot earlier that I have a Gmail account. If I send an email from the command line on my home computer, which is on Comcast, the mail log shows that I successfully connect to Gmail, the message is sent and accepted by Gmail, but the email never arrives in my inbox. I've tried several times with the same result.
However, emails from a web server from work get through to Gmail without a problem. So I'd bet it's a case of them not delivering mail from Comcast IP addresses.
For grins, I also tried sending to my Yahoo email account from my home computer and their server at least refuses the connection and I get an error message stating that it's because it's a residential IP address.
In this case you need an SMTP client (=a software which directly sends the mail to the Gmail server) which supports authentication.
I think this might also be possible with Postfix by editing the configuration files. I know I had to set up authentication to send emails to my work address directly from my home computers, but I haven't been able to get the same thing to work with Gmail yet. If I get a chance, I'll look into it again later tonight.
charlie

Setting Host for sending mails

Hi Xperts
For sending mails to external mail id my internal support team had advised to do the following changes:
"<i>Please configure your host(s) to send to smlolw.lol.com, use default port#90.</i>"
i'm not dure on what he meant by this and where to carry these changes. Can i be guided to have this set properly.
thkx
Prabhu

Hi,
1. Goto transaction SCOT.
2. Double click the SMTP.
Thanks,
Reward If Helpful.

How to create distribution list in workflow? for sending mail or work-item

Hi,
How to create distribution list in workflow? for sending mail or work-item to multiple users.
Regards,
Surjith

Hi Surjith,
A.Working with Distribution Lists Creating a Distribution List.
1 Businees Workplace->shared folder - create new subfolder name = WF_distributor
2.Then click on the distribution list in Businees Workplace.
say create Name = WF_Vliste
folder Name = WF_distributor
3.distribution list content tab
Enter Recipient (SAP User ID)
B.Wrkflow Builder
Find out the dialig step in which u want to use distribution list
Use workflow Rule 30000012 (SWX_READ_DLI).
Maintain the binding from workflow container to rule container.
Just pass the name of the distribution list from WF to Rule container.
Regards
Sagar S

Sound for Sending Mail

I've checked all through the forum and can't find an answer, so I hope this is not a repeat...
Is there a way to have a different sound (that I choose) play for sending mail versus receiving mail? I can change the incoming sound in preferences and I've checked the box to have sound play for other events...but it always plays the same sound for every event.
Help!!
MacBook Pro Mac OS X (10.4.10)

I did further reseach and found if you substitute an AIFF file for the "Mail Sent.aiff" file in Mail's package\contents\resources - you can assign any sound. You have to rename the new file exactly the same as the existing. I backed up the original first for safety.
Why isn't there a preference for this??

CLASS cl_bcs Query for sender mail id

Hi,
I am using class cl_bcs.but, i am facing problem for sender mail-id. I want to append mail-id directly to sernder mail-id without using user mail attribute.
Is there ne way from which i can append mail-id as sender mail id??
thanx in advance,
Sameer

you can do that.
check this code sample.
DATA: sender             TYPE REF TO if_sender_bcs.
CLEAR sender .
        sender = cl_cam_address_bcs=>create_internet_address( '[email protected]' ).
        CALL METHOD send_request->set_sender
          EXPORTING
            i_sender = sender.
and check this code sample for complete code.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5931ff64-0a01-0010-2bb7-ff2f9a6165a0
Regards
Raja

In my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])

TS3276 I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

The solution surprised even me, and we've been using Macs since 1984 (still have an original 128K).
I contacted Apple support, and because we had just upgraded yesterday, clicked on the "exception" button as opposed to paying the $19.99 one-time support fee. An Apple tech called and the problem was solved in two minutes.
Somehow during the installation of OS 10.8.2 (over 10.6.x) the key chain data for my email ISP login password got corrupted. The solution was to delete both the POP mail and SMTP entries in my keychain.
Back to Mail, it asked for the POP password, I entered it and bingo, mail got busy downloading. Interestingly, the password was also entered into the SMTP panel.
So, that's it. Thanks for you response, Mr. Hoffman, and regards.

Configure SNMP for send trap in OEM 11g

Hi,
We have OEM 11g in our environment. We have to configure SNMP for send trap to third party application in OEM.
Our platform is Oracle Enterprise Linux 5.4 . We have installes SNMP in Platform . As mention in document (http://download.oracle.com/docs/cd/E11857_01/em.111/e14091/chap2.htm#CHDFDJJI) we configure MASTER.configer file. Then we started the SNMP agent by root user through command ./start_peer -a.
We configure SNMP rule in OEM and then assigned this rules to method.
But we are not able to send traps to third party application(IT360).
I am not able to integrate OEM 11g with IT360.
please suggest me, where i am going wrong in this configration? or i have to do some more configration?
Thanks in advance
Vikash

The SNMP reference manual has been removed from the 10g and 11g doc set.
You could consult the manual in the 9i doc set and check whether the files for your unmentioned platform still get delivered.
Sybrand Bakker
Senior Oracle DBA

Configuring SMTPPlugin for sending mail to Internet

Similar Messages

Maybe you are looking for