Configuring the Adapter

All,
I configured the apps adapter by giving the IP address, user name & pwd in my BPEL process. Is there any file, can we set these parameters so that in later stage if I want to change some of the configuration, I need not touch the BPEL process rather change it in the file. If the file exist, please let me know the name of it.
Thanks,
Sen.

All,
Is there any global variable provided in BPEL to keep configuration parameters? During runtime, these value get substituted. Please revert back with your inputs.
Thanks,
Sen.
Edited by: Sen2008 on Nov 18, 2008 6:39 AM

Similar Messages

  • Configuring File adapter for OSB

    Hi,
    I wish to process invoice data that will be in the csv file . The structure of the file is as following :
    $H$<<Supplier Name>>,<<Supplier Site>>,<<Invoice Number>>
    $D$<<Line Number>> ,<<Business Unit>>,<<Location>>,<<Store Name>>
    $D$<<Line Number>> ,<<Business Unit>>,<<Location>>,<<Store Name>>
    $H$<<Supplier Name>>,<<Supplier Site>>,<<Invoice Number>>
    $D$<<Line Number>> ,<<Business Unit>>,<<Location>>,<<Store Name>>
    $D$<<Line Number>> ,<<Business Unit>>,<<Location>>,<<Store Name>>
    The intent is to configure the file adapter in such a fashion that it rejects the entire invoice if there are any errors in any of the lines that belong to that invoice. The invoices that follow the erred inovice should be processed normally. How do I configure the adapter to achieve this? Any help is greatly appreciated.

    Hi,
    Configuring the adapter for rejecting the invalid invoice rows is not possible. Adapter should be configured as usual to read all the rows. Once the rows are read, you can have all validation in the proxy service. If you find any invalid rows, you can write those rows to a saperate file so that it can be corrected and fed again. And all the other valid rows can be sent for further processing.
    Thanks,
    Vishwa

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • The car gauge app available from the itunes store utilizes an OBDII Bluetooth adapter, but I can't configure the Bluetooth address. How can I use this app I just installed, it has to have the Bluetooth address configured.

    I saw an advertisement in a car magazine for an app that would provide gauge read outs available for download from the app store. So I went to the app store, found the app, downloaded and installed it. I then purchased the Bluetooth OBD hardware adapter required to transmit the data from the car to the phone. The adapter has to be configured for the app to communicate with it. This is an apple approved app. But everything I've read says that apple will not allow iPhone owners to make any adjustments to their Bluetooth addresses. And that iPhone only provides Bluetooth connectivity to basic head sets speakers and audio formats through the car stereos ( but no audio streaming). 
    Bottom line, apple approved app and hardware that can't be configured unless I perform a jailbreak? I don't want to JB the phone but it seems that apple has left me with no other options. I've already invested time and money on this software and hardware. Their must be a legitimate way to use this apple approved software. Does anyone know how to adjust/configure bluetooth settings/addresses?

    Generally, if you have to enter a code for bluetooth, your iPhone will ask you to enter a 4 digit code when pairing.  Check the instructions for the device you are trying to pair with your iPhone.  The instructions should give you the code in the pairing instructions, if a code is required.

  • Configuring the SOAP Adapter

    Hi Folks,
    I have a sceanrio where an AXIS client needs to talk to the XI SOAP Adapter.
    How do I configure the SOAP adapter?
    I tried to access the help docs for configuring the SOAP adapter. I understand that the adapter depends upon the plain J2SE Adapter Engine which should be available on port 8000.
    But when I try to access
    http://<hostname>:8000 I get an access denied error
    Please help!
    Thanks in advance,
    Shailesh

    Hi Shailesh,
    Maybe your 8000 Port is in Use. So you can chance the port to 8200 or something else.
    You Change port in "GUIBrowserEngine.properties" file.
    And try to patch the Plain J2SE Adapter Engine with "SP 10 for XI Connectivity SE 3.0"
    Regards,
    Robin

  • Problem regarding Configuring the File Adapter

    Hi,
    I am making a Flat File to XML File Scenario. I have made all the Necessary developments and the Routings in the Integration Repository and the Integration Directory. The Sender Communication Channel Uses the Message Protocol "File Content Conversion". All the required steps have been done. We have installed the System and also the Basis Team has done the Post Installation Activities.
    <b> The Problem is that the "File is not getting picked up". When checking the RWB and henceforth the Adapter Monitoring we see that the File Adapter is disabled and the XI and the BC adapters are green. Previously we were on SP9 and now we are on SP14. The SAP Basis is at 640 and SP9 and the SAP ABAB is on 640 and SP9.</b>
      We are also unavailable to see the File Communication Channels that we have created. When the Tcode "sxi_cache is run it is giving an error that Cache not refreshed andon refreshing various times too the Cache is not Refreshed.
    Please Suggest us what we should do. Eagerly waiting for a reply and Thanking in Anticipation. Do we need to make some for configurations for that.
    Warm Regards
    Chakra and Somnath

    Hi Somnath,
    If the sender file adapter is up and running and even after that if you find some problem, the first thing you need to do is check if your file has been picked. The easiest way to check the same is to set the mode to DELETE, that is the file gets deleted as soon as it is picked. If your file has not been picked then the reasons for the same could be the following.
    - The path that you specified while configuring the sender communication channel would have been wrong.
    - While specifying the file name take care as it is case sensitive.
    - If you require content conversion then make sure that the parameters entered at the time of configuration are all correct.
    Please go thru the following links to get a very clear picture of your requirement.
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/44/6c9442c22d1131e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/607fe4756b654ab9f420097c29f6e9/frameset.htm
    Also make sure that your content conversion is in sequence wrt Datat Type Sturcture.
    Go through these blogs below for more detail on the same:
    /people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
    /people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
    I hope this would help you solve your problem.
    Regards,
    abhy
    Message was edited by: Abhy Thomas

  • Problem in configuring the File adapter communication channel in ID

    Dear All ,
    Scenario : <b>IDOC to Xml file</b>
    While configuring File adapter configuration channel , I mentioned the following :
    "File" in Adapter Type
              " File system (NFS) " IN Transport Protocol
              " File " in Message Protocol
    but nothing appears in Adapter Engine ???
    Can anybody help me to solve this problem . What could be the reason .
    Thanks in Advance
    Regards
    Prabhat

    Hi Prabhat
    Please elaborate as to in which format you need the file at the receiver's end.
    also, please go through this link:
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    Also there may be some error in sending Idocs, to review that, please go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
    I hope it helps,
    Thanks & Regards,
    Varun Joshi

  • Error in Configuring the EBS Adapter for WebCenter

    Hi All,
    when I'm configuring EBS Adapter for Web Center I'm getting the below Error while running the sql script AXF_EBS_SOLUTION_DATA.sql ,and I check the AXF_CONFIGS table is not available in db schema, not sure when this table will create. please find the error log detail below and give me some hint or link to overcome from this issue.
    Error Log:
    SQL> @AXF_EBS_SOLUTION_DATA.sql
    49  /
      v_formId AXF_CONFIGS.FORMID%TYPE;
    ERROR at line 2:
    ORA-06550: line 2, column 12:
    PLS-00201: identifier 'AXF_CONFIGS.FORMID' must be declared
    ORA-06550: line 2, column 12:
    PL/SQL: Item ignored
    ORA-06550: line 3, column 26:
    PLS-00302: component 'EVENTID' must be declared
    ORA-06550: line 3, column 13:
    PL/SQL: Item ignored
    ORA-06550: line 6, column 8:
    PL/SQL: ORA-02289: sequence does not exist
    ORA-06550: line 6, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 7, column 13:
    PL/SQL: ORA-00942: table or view does not exist
    ORA-06550: line 7, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 9, column 8:
    PL/SQL: ORA-02289: sequence does not exist
    ORA-06550: line 9, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 10, column 254:
    PLS-00320: the declaration of the type of this expression is incomplete or
    malformed
    ORA-06550: line 10, column 254:
    PL/SQL: ORA-00904: "V_FORMID": invalid identifier
    ORA-06550: line 10, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 11, column 13:
    PL/SQL: ORA-00942: table or view does not exist
    ORA-06550: line 11, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 13, column 8:
    PL/SQL: ORA-02289: sequence does not exist
    ORA-06550: line 13, column 1:
    PL/SQL: SQL Statement ignored
    ORA-06550: line 14, column 254:
    PLS-00320: the declaration of the type of this expression is incomplete or
    malformed
    ORA-06550: line 14, column 254:
    PL/SQL: ORA-00904: "V_FORMID": invalid identifier
    ORA-06550: line 14, column 1:
    PL/SQL: SQL Statement ignored
    Thanks in advance
    Sanjeev

    Hi Sanjeev,
    You need to check if you have access to AXF_CONFIGS table. Check if you have ran GRANT_ACCESS.sql script which has below grant commands.
    grant execute any type to apps;
    grant create type to AXF;
    grant select on AXF.AXF_CONFIGS to apps;
    v_formId AXF_CONFIGS.FORMID%TYPE; means tableName.columnName%type;
    so looks like when you are running AXF_EBS_SOLUTION_DATA.sql you are not able to access AXF_CONFIGS table.
    Hope this helps.
    Regards,
    Amol Gavali.

  • How to configure the jms adapter

    hi all,
           i got some trouble trying to configure de JMS adapter, i 'd be glad if some colud give me a hand with this. i'am wordering if there is a complete document about this topic to help me out with de configuration.
    thk u all very much.
    Regards, Pablo

    Hi,
    The below URL will help you to understand what is JMS, how to configure and do a testing.
    http://learn-oraclesoa.blogspot.co.uk/2013/04/oracle-jms-adapter-tutorial.html
    Below will help you to configure the JNDI for JMS
    http://manojm-nair.blogspot.co.uk/2013/02/configuring-connection-jndis-for-jms_13.html
    Thanks,
    Vijay

  • Configuring the Receiver File/FTP Adapter !!

    Hi
    I am trying to configure the Receiver file adapter using the J2SE adapter engine(Please note , NOT the J2EE adapter engine).I see a prerequisite for configuring as below
    "The address (HTTP port and URL) where the adapter can be contacted from the Integration Engine".
    What values are to be specified and how can they be validated ?
    I could see an example given in the Docs saying below,
    If i specify , say for example,
    "XI.httpPort=1234 and
    XI.httpService=/file/Receiver, the end point address of the file/FTP adapter in the Integration Engine must be specified as follows:
    http://<fileadapterhost>:1234/file/Receiver"
    Can anyone explain what exactly is this endpoint address and where should it be specified/referred to ?
    Thanks
    Saravana

    Hi,
    "http://<fileadapterhost>:1234/file/Receiver"
    this adress refers to an end point with the end point type "xi-connectivity" in the integration directory (ID)which refers to the settings in the file adapter (httpPort=1234 and XI.httpService=/file/Receiver)
    1. you specify these adress in the file adapter (outbound)
    2. you refer to these adress in the ID (Receiver System End points)
    every file adapter should have an own port, because you can not specify two identical ports in two fileadapters.
    hope I could help you,
    michele
    Message was edited by: Michele Mangieri
    Message was edited by: Michele Mangieri

  • ThinkPad 2nd HDD Adapter for T40 -do I need to configure the hard drive?

    I purchased a new Samsung HM160HC hard drive and a Thinkpad 2nd HDD adapter for Ultrabay slim for a Thinkpad T40. When I install the PATA hard drive into the adapter do I need to configure the hard drive as slave, cable select, or leave as master? Any help would be appreciated.   

    Reformat usiing the original install disc then update to v10.6.8.
    Mac OS X 10.6: Reinstalling Mac OS X

  • Dynamically setting the values for the Adapter Configuration in BPEL

    We are configuring the JMS adapter to put into an MQ topic. For this we are giving all the values for the configuration parameters like
    Factory Properties.
    JMS connection Factory
    Transacted
    Destination Type
    Username
    Password
    Destination Name, etc...
    and we are able to produce message on the MQ.
    Our requirement is to dynamically pass the values for the above parameters from some configuraion files(other than oc4j-ra.xml), which will have value for each obove parameters.
    Any help on this is highly appreciated.
    Regards,
    Suman

    Re: JMS Properties setup
    this thread will explain how to do it.

  • Dynamically setting the values for the Adapter Configuration

    We are configuring the JMS adapter to put into an MQ topic. For this we are giving all the values for the configuration parameters like
    Factory Properties.
    JMS connection Factory
    Transacted
    Destination Type
    Username
    Password
    Destination Name, etc...
    and we are able to produce message on the MQ.
    Our requirement to dynamically pass the values for the above parameters from some configuraion files(other that oc4j-ra.xml), which will have value for each obove parameters
    Any help on this is highly appreciated.

    Re: JMS Properties setup
    this thread will explain how to do it.

  • Newbie Question: Install/configure the SAP NetWeaver MDM PI Adapter

    Hello gurus.
    I'm new to PI and need to install/configure the SAP NetWeaver MDM PI Adapter.
    Can someone guide me or link me up ?

    There is a guide available on SMP: https://websmp205.sap-ag.de/~sapidb/011000358700001890482008E
    Check if this helps...section3 should be of your interest.....you need to use S-user credentials to view the above document.
    Regards,
    Abhishek.

  • Log4j - issue in configuring the file name for daily rolling file adapter

    We have configured the log4j properties. We want to create back-up of log file each hour. The file name of the log file is MyApp.log and as per the below configuration after each hour backup file is created as
    MyApp.log<<time>>
    but we want that file should be created in follogin format
    MyApp<<time>>.log
    Below are the log4j properties configured, please let us know, what should be the correct option to create the filename in desired format.
    # Set root logger level to DEBUG and its only appender to MyApp.
    log4j.rootLogger=DEBUG, MyApp
    log4j.appender.MyApp=org.apache.log4j.DailyRollingFileAppender
    log4j.appender.MyApp.File=D:/logs/MyApp.log
    log4j.appender.MyApp.DatePattern='.'yyyy-MM-dd-HH
    log4j.appender.MyApp.Append=true
    log4j.appender.MyApp.layout=org.apache.log4j.PatternLayout
    log4j.appender.MyApp.layout.ConversionPattern=[%d{yyyy-MM-dd} %d{HH:mm:ss z}] %m%n

    yes you can use /SAPDMC/SAP_LSMW_IMPORT_TEXTS via LSMW
    In the SAP system, there is no uniform rule for the structure of the actual text key Textname. However, in order to be able to maintain the structures and fields, you have to know what the structure of text name as well as the values for text object and text ID are.
    Procedure
           1.      Display a text of the required text type.
           2.      Branch to the editor.
           3.      Choose Goto > Header.
    The Text header dialog box appears.
    Result
    In the Text header dialog box, you gather the required information.

Maybe you are looking for