Configuring tomcat and apache on the same system

i need to configure tomcat and apache on the same system.
first i have configured apache and it is working well.
Next is have configured tomcat and it is working well.
i need to interlink tomcat and apache. so i downloaded jk connector and i have configured it.
i gave an entry in the httpd.conf as
Include /tomcat/conf/auto/mod_jk.conf
i have copied the file mod_jk.so to /usr/local/apache/libexec/
went i start apache after the entry is given it gives the error like this
cannot load /usr/local/apache/libexec/mod_jk.so into server: ld_so.1. /usr/local/apache/bin/httpd: fatal : libgcc_s.so.1 : openfailed : no such file or directory in linux
please help to configure this.
i have done every thing as it is in apache.org documentation. please give the complete configuration. some say that tomcat is not compiled according to apache1.3. but i configure jk connector as --with-apxs=/usr/local/apache/bin/apxs
send me the reply
thankqs in advance

Hi,
I'm working in a linux machine and choose to use also two different users. Of course I'm using two different ORACLE_HOME directories.I think that the best approach.Just a question ,are you keeping the "GROUP" same or different?
Anand

Similar Messages

Problem in configuring tomcat and apache

I am using mod_jk to configure tomcat and apache. In the server.xml file in /TOMCAT_HOME/conf, I have added this line:
<Listener className="org.apache.jk.config.ApacheConfig" modJk="/TOMCAT_HOME/mod_jk/mod_jk.so" />
And when I restart the tomcat, I get this error:
Caused by: java.lang.RuntimeException: Unable to create path to config file :
/usr/local/tomcat/apache-tomcat-5.5.15/conf/auto/mod_jk.conf
What this error is and how it will be removed. Any suggestion?
Joseph

Seems like a filesystem user rights problem. Perhaps tomcat is running as a seperate user and this user has no rights to write to one of the subdirectories?

Can I run Photoshop CS4 and CS5 on the same system?

I read somewhere a zillion years ago (right?) that you coould run CS4 and CS5 on the same system but at the time I wasn't even considering it.
Run on the same system - not ness to run at the same time
Or should I install it on a seperate drive (bootable) and go that route. What has everyone found to work and/or not work?
Thanks in advance for your help
BJ

Yes, you can run CS4 an CS5 on the same computer. They install in different folders and don't get in each other's way. As a matter of fact, you will find many posts in this forum from the experts recommending to keep CS4 (or an earlier version) when installing CS5. This way, there is no danger of losing any older plug-ins you may have that aren't compatible to CS5.
When I installed PS CS5 I had problems with my scanner driver. Instead of spending loads of time fixing that problem, I just use PS CS4 when I want to spend an afternoon scanning things. I'm not recommending that "lazy man's" solution, but it is an example of how CS4 and CS5 can be used on the same system.

NetWeaver 7.0 and ERP to the same system

Hi,
We currently have a SAP ERP Development system with SAP ERP 2005 (ECC 6.00, kernel 7.00) with ABAP only (not Java).
We would like to install a Business Intelligence (BI) system but we don't have any other available server.
I would like to know if it is possible to install SAP Netweaver 7.0 (including BI) in the previews mentioned system. Is there a Guide available?
The second question that I have is if it is proper for BI to have a development and a production system?
Thanks.

Hi,
check the other thread if it can help you,
ECC and BI in the same system
For BI, you may have only ABAP or both ABAP+JAVA. in case of only ABAP you can't use the BI functionality on Java. Now what functionality you would get extra in BI-Java, check here..
http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
Regards,
Debasis
Edited by: Debasis Sahoo on Apr 16, 2009 10:59 AM

ECC and BW in the same system - Gotchas?

From the documents, and from the information from SAP, it appears that BW 3.5 can be installed into an ERP 2004 / ECC 500 system. Does anyone have any experience with this during the ECC 5 rampup?
I have a client that is considering this and would like to know of any gotchas before we hit them.
For instance the documents mention you need to tune the Oracle database with the parameter "star_transformation_enabled=true", which is normally used in a BW system. What impact, if any, will that have the ECC side of things?

Hi John,
Just to respond to your post and clarify some of the areas.
1. The mySAP ERP 2004 ECC 5.0 and it's internal SAP BW is not an MCOD implementation. The SAP BW is internal with the ECC (same instance, same database schema, and same database. Whereas MCOD is different instances, different schemas, but same database. One important point is that MCOD and mySAP ERP 2004 fully support three tier architecture.
2. MCOD was not recommended for a mix of OLTP and OLAP applications on all databases until recently (e.g. recommended for SAP R/3 Enterprise and mySAP SRM but not SAP R/3 Enterprise and SAP BW). This has recently changed where a combination of OLTP and OLAP is now supported: See http://service.sap.com/mcod or see SAP note 712777.
3. SAP BW Performance: In a mySAP ERP 2004 ECC 5.0 system with the internal SAP BW functionality active, the system must be configured for both the transaction processing and OLAP functions. This configuration must include load balancing if you have high usage. Without load balancing you are unable to target activities to specific servers or separate different user groups. Obviously if you have only one server load balancing is not available. It is strongly recommended to use the three system configurations for SAP ERP applications and SAP BW.
4. Automatic multiple Instance shutdown:
For MCOD this is not the case that shutting down one system in your MCOD installation will also shutdown your other MCOD systems; this only happens if you also close the database (remember it is the only part that this shared). The instances can be started and shutdown independently.
For the internal SAP BW within ECC 5.0 you have "one system" so if you shut it down, you really shut it down.
5. Impact of applying patches or doing client copies:
For MCOD systems, the systems are independent and can be patched and administered independently. The only common part is the database. The database maintenance and patching does affect all the connected MCOD systems. For processes like system copies, these are also independent of the other systems. Obviously if you share the same server for the different systems you need to take care with CPU and memory usage of these functions.
As SAP BW within ECC 5.0 is the same system, you have to patch the system all at once (recommendation is to use SP-Stacks). A SAP_BASIS support package applied to ECC is also applied to SAP BW at the same time. With regard to client copies, client copies are only supported for ERP 'OLTP' clients (not for the SAP BW client).
6. "The headaches just are not worth it....especially since server prices are low"
I would not totally agree with this comment. For mySAP ERP this low price server argument also works for adding more app servers to ERP and doing load balancing. The use of MCOD or the internal SAP BW within ECC will be made on a number of factors by the customer with different weighting being applied to each of the Pros and Cons.
The new "internal SAP BW within ECC 5.0" gives customer's system architects more options and increases the flexibility of the total solution in general (delivery of a centralized EDW, deliver of operation reporting, deliver of application or organization specific datamarts to name a few). With more options and flexibility, more decision points need to be reviewed and analyzed which can be a good thing.
I hope this helps,
Mike.

Installing 10g and 11g on the same system?

I have Windows XP and have installed 10g database. Can I install 11g on the same system and I can switch to use either of database?
Thanks in advance.

Hi,
I'm working in a linux machine and choose to use also two different users. Of course I'm using two different ORACLE_HOME directories.I think that the best approach.Just a question ,are you keeping the "GROUP" same or different?
Anand

Blackmagic Resolve and Speedgrade On the Same System?

I'm looking at building an educational color correction lab that would need to run both Resolve and Speedgrade CS6. It has become problematic with budget cuts in California to build a more robust machine. *(Tesla; Quadro 5/6000)
The system I'm building is similar to the Resolve reference system using 2x computational gpu's.
The system would have:
1x Nvidia Quadro 600 (GUI) (main card for 30-bit color output)
2x Nvidia GTX 580 (CUDA) (no outputs)
1x Blackmagic DeckLink HD Extreme 3D (SDI out)
My problem lies in the fact there is no technical documentation for either cs5.5 or cs6 as to how gpu tasks are delegated. The only consensus that I can find is that CS6 and CS5.5 only perform acceleration on the main gpu except in the case of using and nVidia Maximus system.
I need CS6 to recognize one of the GTX 580 as the more powerful card and use it for MPE and hardware acceleration. I know it cannot use both of them. As I understand, my Adobe products would default to the Quadro 600. Is there any way to avoid this? Or maybe a suggestion on how to better set up a system for 4k color grading on a budget?
(If it could be avoided, I would like not to have one of the gtx 580's work as the main display card. leaving one less for Resolve)

Couple of bottlenecks in your setup as you currently describe it.
I'm assuming you have a 10 bit monitor for CC (something like a HP Dreamcolor), otherwise there is no use for any Quadro at all. Apart from the Quadro model - I'll come back to that later - you have three video cards plus the BM card. You did not tell on what platform they must be installed and it depends on the mobo used what will happen when all these cards are installed. One thing is for sure, there is no mobo in existence that has 52 PCIe lanes, so your video cards will not run at 16x speed, but only at 8x speed or slower. Running a video card at 8x instead of 16x results in a performance penalty of around 10-15%. But if you have this in mind for a 1155 platform, then the video cards will run at max at 4x speed and that wil be very noticeable. Whichever way you turn it, with this setup and the intention to do 4K CC work, you will not have the PCIe lanes for a dedicated raid controller and with that material you will want a dedicated raid controller.
Why two GTX 580's when not used for output or is that only for Resolve?
Assuming you have a platform with 40 PCIe lanes available, and despite budget restrictions, I would go for two Quadro 4000+ cards, forget about the 600 which is way too underpowered, forget about the GTX 580, since they lack 10 bit output, skip the Maximus/Tesla solution since it is too expensive. This solution assumes that Resolve can use both Quadro cards, since as you stated, PR can only use one.
Using this approach, you can run both Quadros at 16x and the BM at 4x and still have 4 PCIe lanes available for a raid controller at 4x. However, if you do not have a 10 bit monitor, then I would suggest to use two GTX 580's instead of two Quadro's.

Can you run Photoshop CS3 and CS5 on the same system?

I did this before on another system where I had both CS2 and CS3 installed and I could run either version when I wanted. Back then I just never bothered to uninstall CS2.
Now on this system I'm tunning CS3 and I have some plug ins I use regularly that aren't compatible with CS5 and I don't want to lay out the cash again for them. So I'd like to be able to install CS5 and use it primarily but when I need to use the plug ins then just switch to CS3.
I've noticed many programs these days won't run on top of another version. So is there any reason I won't be able to run both?

Absolutely. All versions of Photoshop can coexist simultaneously, though you can only run one at a time.
It's usual not to install the old version until you're sure the new one is working great. If you have the space, never uninstall it. It's handy to have it around for answering questions, here for example.
-Noel

Version 1 and CS4 on the Same System?

Hello,
I am ready to install the CS4 Production bundle but I have an active project in Encore 1.
I have read that I can not open the V1 files in Encore CS4.
Is there a way to still use the V1 file?
Or can I have V1 installed along with CS4 in order to finish this project?
It is quite involved with a lot of menus and chapter points.
Thanks

Tim,
I'd finish in Encore 1. I did the version 1 to CS2 conversion for another user, and she was able to get about 99% of her Project into CS4. Still, there were a few little problems. Unless you absolutely require something in CS4, I'd not recommend that conversion route.
Hunt

IDOc creating and postinng in the inbound system.

i one requirement. i will get sales orders in flat file from legacy system. i need to consolidate the sales orders and post in the syatem as debit memo request.here i need to create the idoc with consolidate sales order and post in the same system.i need to use only IDOC.
i am confused in one step.
1. we will read the data from flat file and consolidate the orders.
2. for one consolidate order we will create IDOC .which function module we should use to create IDOC?
3.what kind of mapping we should do for this?
4.after creating IDOC.i need to post from the same custom program? how can i do this?
5.if i use IDOC_INBOUND_SINGLE. will it create IODC and also POST?
if anybody got this type of requirement plese help me.

hi
THIS SAMPLE PROG MAY HELP YOU
constants: c_doctyp type edidc-idoctp value 'ZUSRDET01', IDOC TYPE
 c_segnam type edidd-segnam value 'Z1USRDET01', SEGMENT TYPE
 c_mestyp type edidc-mestyp value 'ZUSRDET'. MESSAGE TYPE
data: it_zusr02 type usr02 occurs 10,
 it_edidc type edidc occurs 0,
 it_edidd type edidd occurs 0,
 wa_zusr02 type usr02,
 wa_edidc type edidc,
 wa_edidd type edidd,
 wa_z1usrdet01 type z1usrdet01,
 v_occmax type idocsyn-occmax,
 v_nbseg type i.
 clear wa_zusr02.
 clear wa_edidc.
 Save the message type and the basic IDoc type in the control segment.
 move c_mestyp to wa_edidc-mestyp.
 move c_doctyp to wa_edidc-idoctp.
 Retrieve the maximum number of segments in the basic IDoc type.
 select min( occmax ) from idocsyn into v_occmax where idoctyp eq c_doctyp and segtyp eq c_segnam.
 Save the whole USR02 table content in the IT_ZUSR02 internal table.
 select * from usr02 into corresponding fields of table it_zusr02.
 Create a data segment for each line of IT_ZUSR02.
 loop at it_zusr02 into wa_zusr02 .
 move-corresponding wa_zusr02 to wa_z1usrdet01.
 clear wa_edidd.
 move c_segnam to wa_edidd-segnam.
 move wa_z1usrdet01 to wa_edidd-sdata.
 append wa_edidd to it_edidd.
 clear wa_zusr02.
 clear wa_z1usrdet01.
 endloop.
 Count the number of data segments.
 describe table it_edidd lines v_nbseg.
 If the number of data segments exceeds the maximum allowed number,then display an error message.
 if v_nbseg gt v_occmax.
 write:/ 'ERROR'.
 endif.
 call function 'MASTER_IDOC_DISTRIBUTE'
 exporting
 master_idoc_control = wa_edidc
 OBJ_TYPE = ''
 CHNUM = ''
 tables
 communication_idoc_control = it_edidc
 master_idoc_data = it_edidd
 exceptions
 error_in_idoc_control = 1
 error_writing_idoc_status = 2
 error_in_idoc_data = 3
 sending_logical_system_unknown = 4
 others = 5
 if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 endif.
reward points for useful ans
Regards
Ankit

Tomcat and Apache/Tomcat is the same?

Hello,
I�m new to jsp and somedays ago I asked here a question and the solution was about installing Apache or Apache/Tomcat.
Now, my question is the following.
When I started to learn jsp , what I did were to install Tomcat. After reading some questions in these forums I do not know what is the difference between the installation of Tomcat and the installation of Apache/Tomcat.
What I have done for the moment is to have a server with Apache and another server for my jsp pages with Tomcat....
Does it means that it is possible to integrate two installations in only one server and to run all the pages in the same server? Where can I find information about that?
Thanks a lot and regards,
Patty

Tomcat has an HTTP listener built in, so you don't necessarily need Apache to run Tomcat and serve up HTML, JSP, and servlets.
But if you want to have Apache handle static HTML and forward servlet/JSP requests to Tomcat, there are docs at the Tomcat site to tell you how to bolt Tomcat onto Apache.
The Wrox book "Professional Apache Tomcat" has good instructions, too. I've done it successfully many times. - MOD

Upgrade the default Tomcat and Apache

Hi
Is there a working and correct way to upgrade and run a Tomcat and Apache server of your pick instead of the pre installed versions in OSX 10.4.8 server.
Meaning that i want to start and admin them throught Server Admin interface, and making Jboss notice the new Tomcat aswell.
Mikael

If you're asking here, the answer is probably no.
It is possible to build and install later versions of all the Mac OS X Server-bundled apps, including Apache, Tomcat, postfix, bind, etc., etc., but in most cases once you do you lose the ability to drive them via Server Admin.
Server Admin knows what it knows - more importantly it doesn't know any of the features of later versions of the apps (it may work with point released (e.g. Apache 1.3.20 -> 1.3.30, but it won't work with major versions like 1.3 -> 2.0).
So if you go that way you're on your own as far as configuring and maintaining the service is concerned.
Leopard (10.5) will include later versions of these apps if you're prepared to wait.

I have a photo cd from photographer that was burned on a mac but it will not open on my mac. It goes in, makes some noise, then ejects. My system pref. is set to open iPhoto when a photo cd is inserted. She has sent me 2 disc and both do the same thing

I have a photo cd from photographer that was burned on a mac but it will not open on my mac. It goes in, makes some noise, then ejects. My system pref. is set to open iPhoto when a photo cd is inserted. She has sent me 2 disc and both do the same thing. Any ideas?

NOt an iPhoto issue - either a bad CD or a bad Superdrive on your computer - no way for us to tell try the CD in a different computer
LN

The same itunes Library and playlists on the same computer with two systems

I want to have the same itunes library and playlists on the same computer with the two different Os 10.3.9 and 10.4.9 each one on the different disk. without copy this in the itunes folder (because my library its 30Gb)
I have the same user name on the Os. I use the same version of itunes in both systems
I use my ipod to play the library but its not the best solution (i lost my library in ipod twice because I confused from what os was synchronized)

Hello and Welcome to Apple Discussions.
Amalgamate the two iTunes libraries. Then load iTunes and hold down the Option/Alt ⌥ key and then choose "Choose Library" and then point both copies of iTunes to use the combined iTunes library.
regards
mrtotes

Dreamweaver 8 and DW cs4 or DW cs5 on the same system?

Hi all,
I'm using DW8 + MX Kollection 3.7 pro for large sites and I I'm thinking to install DW CS4 or CS5 along with it.
So, my question:
can I install DW CS4 + ADDT or DW CS5 (alone) on the same system?
Do they interfere each other?
I don't mind working on the same website with different version of DW.
But it could happen that I will need to edit a page of a website with a different verison of DW. Is there any problem to do this?
For example: will DW CS4 + ADDT retain all server behaviuors created in DW 8? or, at least, will DW CS4 editing break server behaviour so that I will not able to work again on the page with DW8?
Sorry for all these /dumb) question but I fear upgrading (every application) will break something working right away.
TIA
tony

So, my question:
can I install DW CS4 + ADDT or DW CS5 (alone) on the same system?
Do they interfere each other?
Yes, you can install them on the same system, and no, they won't interfere with each other. Each version of DW installs as a complete, standalone application.
But it could happen that I will need to edit a page of a website with a different verison of DW. Is there any problem to do this?
No there's not a problem.

Configuring tomcat and apache on the same system

Similar Messages

Maybe you are looking for