Configutil Error

Hi,
We have two separate LDAP server, 1) for messaging server config and 2nd) for Users/Groups..... We are trying to change some of the parameters through configutil, and facing the following error:
[09/Mar/2008:14:42:58 +0300] lmspmbx1 [2830]: General Error: func=config_writedriver_psetinit; error=could not access server's configuration in ldap: Failed to open local cache
NO Unable to set option(store.partition.primary.path)
We can manually browse the configuration through LDAP browser BUT when we try to change it, it gives us the above error......??
We are running:
Sun Java(tm) System Messaging Server 6.2-4.03 (built Sep 22 2005)
libimta.so 6.2-4.03 (built 04:37:42, Sep 22 2005)
SunOS mbx1 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V490
Any Help ????

Here below is the access log.....
[10/Mar/2008:18:26:00 +0300] conn=5557 op=-1 msgId=-1 - fd=43 slot=43 LDAP connection from 86.36.68.21 to 86.36.68.25
[10/Mar/2008:18:26:00 +0300] conn=5557 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mymail.edu, o=NetscapeRoot" method=128 version=2
[10/Mar/2008:18:26:00 +0300] conn=5557 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot"
[10/Mar/2008:18:26:00 +0300] conn=5557 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[10/Mar/2008:18:26:00 +0300] conn=5557 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[10/Mar/2008:18:26:00 +0300] conn=5557 op=2 msgId=3 - UNBIND
[10/Mar/2008:18:26:00 +0300] conn=5557 op=2 msgId=-1 - closing - U1
[10/Mar/2008:18:26:00 +0300] conn=5558 op=-1 msgId=-1 - fd=44 slot=44 LDAP connection from 86.36.68.21 to 86.36.68.25
[10/Mar/2008:18:26:00 +0300] conn=5557 op=-1 msgId=-1 - closed.
[10/Mar/2008:18:26:00 +0300] conn=5558 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mymail.edu, o=NetscapeRoot" method=128 version=2
[10/Mar/2008:18:26:00 +0300] conn=5558 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot"
[10/Mar/2008:18:26:00 +0300] conn=5558 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[10/Mar/2008:18:26:00 +0300] conn=5558 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[10/Mar/2008:18:26:00 +0300] conn=5559 op=-1 msgId=-1 - fd=43 slot=43 LDAP connection from 86.36.68.21 to 86.36.68.25
[10/Mar/2008:18:26:00 +0300] conn=5559 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mymail.edu, o=NetscapeRoot" method=128 version=2
[10/Mar/2008:18:26:00 +0300] conn=5559 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot"
[10/Mar/2008:18:26:00 +0300] conn=5559 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[10/Mar/2008:18:26:00 +0300] conn=5559 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[10/Mar/2008:18:26:00 +0300] conn=5559 op=2 msgId=3 - UNBIND
[10/Mar/2008:18:26:00 +0300] conn=5559 op=2 msgId=-1 - closing - U1
[10/Mar/2008:18:26:00 +0300] conn=5558 op=-1 msgId=-1 - closing - B1
[10/Mar/2008:18:26:00 +0300] conn=5559 op=-1 msgId=-1 - closed.
[10/Mar/2008:18:26:00 +0300] conn=5558 op=-1 msgId=-1 - closed.
[10/Mar/2008:18:27:00 +0300] conn=5560 op=-1 msgId=-1 - fd=43 slot=43 LDAP connection from 86.36.68.21 to 86.36.68.25
[10/Mar/2008:18:27:00 +0300] conn=5560 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mymail.edu, o=NetscapeRoot" method=128 version=2
[10/Mar/2008:18:27:00 +0300] conn=5560 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot"
[10/Mar/2008:18:27:00 +0300] conn=5560 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[10/Mar/2008:18:27:00 +0300] conn=5560 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[10/Mar/2008:18:27:00 +0300] conn=5560 op=2 msgId=3 - UNBIND
[10/Mar/2008:18:27:00 +0300] conn=5560 op=2 msgId=-1 - closing - U1
[10/Mar/2008:18:27:00 +0300] conn=5561 op=-1 msgId=-1 - fd=44 slot=44 LDAP connection from 86.36.68.21 to 86.36.68.25
[10/Mar/2008:18:27:00 +0300] conn=5560 op=-1 msgId=-1 - closed.
[10/Mar/2008:18:27:00 +0300] conn=5561 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mymail.edu, o=NetscapeRoot" method=128 version=2
[10/Mar/2008:18:27:00 +0300] conn=5561 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot"
[10/Mar/2008:18:27:00 +0300] conn=5561 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[10/Mar/2008:18:27:00 +0300] conn=5561 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[10/Mar/2008:18:27:00 +0300] conn=5562 op=-1 msgId=-1 - fd=43 slot=43 LDAP connection from 86.36.68.21 to 86.36.68.25
[10/Mar/2008:18:27:00 +0300] conn=5562 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mymail.edu, o=NetscapeRoot" method=128 version=2
[10/Mar/2008:18:27:00 +0300] conn=5562 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot"
[10/Mar/2008:18:27:00 +0300] conn=5562 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[10/Mar/2008:18:27:00 +0300] conn=5562 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[10/Mar/2008:18:27:00 +0300] conn=5562 op=2 msgId=3 - UNBIND
[10/Mar/2008:18:27:00 +0300] conn=5562 op=2 msgId=-1 - closing - U1
[10/Mar/2008:18:27:00 +0300] conn=5562 op=-1 msgId=-1 - closed.
[10/Mar/2008:18:27:00 +0300] conn=5561 op=-1 msgId=-1 - closing - B1
[10/Mar/2008:18:27:00 +0300] conn=5561 op=-1 msgId=-1 - closed.
[10/Mar/2008:18:27:17 +0300] conn=5563 op=-1 msgId=-1 - fd=43 slot=43 LDAP connection from 86.36.68.21 to 86.36.68.25
[10/Mar/2008:18:27:17 +0300] conn=5563 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mymail.edu, o=NetscapeRoot" method=128 version=2
[10/Mar/2008:18:27:17 +0300] conn=5563 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot"
[10/Mar/2008:18:27:17 +0300] conn=5563 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mymail.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[10/Mar/2008:18:27:17 +0300] conn=5563 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[10/Mar/2008:18:27:17 +0300] conn=5563 op=-1 msgId=-1 - closing - B1
[10/Mar/2008:18:27:17 +0300] conn=5563 op=-1 msgId=-1 - closed.

Similar Messages

Imap performance and socket errors

-bash-3.00$ imsimta version
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
SunOS vmpm1 5.10 Generic_141414-02 sun4u sparc SUNW,Sun-Fire-V490
We're experiencing imap problems that appear to be load related, and have had to restart mail services several times to restore service. The imap logs show a large number of socket errors. The server load average is in the 1-2 range; there's no apparent memory resource problem. We're seeing 600-1000 simultaneous imap sessions, which is a higher number than in the past. We run JMS & Communications Express on dedicated V490 SPARC server with 8GB of memory. We're planning to add an additional 8GB this Friday.
Our imap configuration settings are as follows:
-bash-3.00$ configutil | grep service.imap
service.imap.enable = 1
service.imap.enablesslport = yes
service.imap.idletimeout = 30
service.imap.maxsessions = 4000
service.imap.maxthreads = 250
service.imap.numprocesses = 1
service.imap.objectclass = top
service.imap.plaintextmincipher = 0
service.imap.port = 143
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = yes
Can you suggest additional troubleshooting steps? Do you recommend any configuration changes?
Thanks.

dpelinka wrote:
Questions:
1. Our JMS version info doesn't state whether it is 32 or 64-bit. Therefore, I assume we are running a 32-bit version. Is that correct?Correct. There is no 64-bit version of MS6.2.
2. Is there a virtual memory limit on the 32-bit version of JMS 6.2? Is the limit greater for JMS 6.3?The Solaris OS imposes the virtual memory size limit of ~3.75GB for all 32bit processes on SPARC. 64-bit processes have a much much larger limit.
http://developers.sun.com/solaris/articles/solaris_memory.html
Regards,
Shane.

Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!

Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Lync Server 2010 control panel - Server Error in '/cscp' Application

Hi everyone,
Recently i have installed Lync 2010 with no problem at all. But when i try to open de control panel it sends me this error:
Server Error in '/cscp' Application.
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) +0
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) +153
   System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +63
   System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +124
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +76
[ConfigurationErrorsException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +12406256
   System.Web.Configuration.Common.ModulesEntry.SecureGetType(String typeName, String propertyName, ConfigurationElement configElement) +69
   System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) +62
   System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) +299
   System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) +1262
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +133
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
[HttpException (0x80004005): Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12599232
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12438981
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.33440
Anyone has any idea what is going on?

To fix your issue, you can refer below link
http://social.technet.microsoft.com/Forums/lync/en-US/14948578-dfaa-4d32-b29d-42ecf576afeb/lync-control-panel-errors
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Error occured while using checkInFileStream of CIS

Hi,
I am having problem using the CIS in client mode. I am trying to use the CheckIn api. I am unable to find the problem. Following are the details:
FLOW: Custom application – client Api – cis-server(Deployed in oracle application server) – content server.
The part of cis-server -- content server works. I have tested the chekin being successful using the web application http://localhost:8888/cis-admin/ucpmbrowsecategory.do?category=active
But the Custom application – Client Api – cis-server part does not work for me
Following is the code for CheckIn along with the exception trace:
public String checkIn() {
System.out.println("ECM1Service :: checkIn :: Started");
String contentId ="";
try {
Properties properties = new Properties();
properties.setProperty(ICISApplication.PROPERTY_CONFIG_TYPE, "client");
properties.setProperty(ICISApplication.PROPERTY_CONFIG_CLIENT_CONNECTION, "jndi");
properties.setProperty("jndi."+Context.INITIAL_CONTEXT_FACTORY,ConfigUtils.getEntry("jndiInitialContextFactory"));
properties.setProperty("jndi."+Context.PROVIDER_URL, ConfigUtils.getEntry("jndiProviderUrl"));
properties.setProperty("jndi."+Context.SECURITY_AUTHENTICATION, ConfigUtils.getEntry("jndiSecurityAuthentication"));
properties.setProperty("jndi."+Context.SECURITY_PRINCIPAL,ConfigUtils.getEntry("jndiSecurityPrincipal"));
properties.setProperty("jndi."+Context.SECURITY_CREDENTIALS, ConfigUtils.getEntry("jndiSecurityCredentials"));
ICISApplication client = CISApplicationFactory.initialize(properties);
//Connect
System.out.println("ECM1Service :: checkIn :: Connect Started");
ISCSDocumentCheckinAPI api = client.getUCPMAPI().getActiveAPI().getDocumentCheckinAPI();
ICISTransferStream transferStream = client.getUCPMAPI ().createTransferStream();
transferStream.setFile(new File ("c:\\fileStreamTest.txt"));
//getSCSContext
ISCSContext context = client.getUCPMAPI ().getActiveAPI ()._createSCSContext ();
context.setUser ("sysadmin");
context.setCrendentials("idcdev");
context.setAdapterName ("ecm");
//getActiveContent
ISCSContent activeContent = (ISCSContent) client.getUCPMAPI ().createObject(ISCSContent.class);
ISCSContentID contentID = (ISCSContentID) client.getUCPMAPI ().createObject(ISCSContentID.class);
contentID.setContentID("TEST_1");
AppLog.debug("ECM1Service :: checkIn :: contentID"+contentID.getContentID());
activeContent.setContentID (contentID);
activeContent.setTitle ("TEST_1");
activeContent.setType ("Test");
activeContent.setSecurityGroup ("Public");
activeContent.setSecurityAccount("fiscalAssistantOnly");
//Execute
System.out.println("ECM1Service :: checkIn :: Execute Started");
ISCSDocumentCheckinResponse result = api.checkinFileStream (context, activeContent, transferStream);
System.out.println("ECM1Service :: checkIn :: Execute Started after");
String message = result.getMessage ();
ICISID icisId = result.getIdentifier();
contentId = icisId.getPropertyAsString("dDocName");
System.out.println("ECM1Service :: main :: message: "+message);
System.out.println("ECM1Service :: main :: icisId: "+icisId.getPropertyAsString("dDocName"));
System.out.println("ECM1Service :: checkIn :: Execute Completed");
} catch (Exception e) {
e.printStackTrace ();
System.out.println("ECM1Service :: checkIn ::Completed");
return contentId;
EXCEPTION:
INFO [main] (AppLog.java:40) - ECMService :: checkIn :: Execute Started
[2008-08-30 15:11:20,234] [main] DEBUG (cis.profiler) - <Timer SectionName="invokeCommand" ThreadName="main" Begin="1220123480234" Desc="" />
[2008-08-30 15:11:20,234] [main] DEBUG (cis.profiler) - <Timer SectionName="FacadeExecuteCommand" ThreadName="main" Begin="1220123480234" Desc="active.document.checkin.checkinFileStream" />
[2008-08-30 15:11:21,734] [main] ERROR (com.stellent.cis.server.filetransfer.impl.ClientResourceHandler) - Error parsing XML
org.dom4j.DocumentException: Error on line 9 of document : <Line 9, Column 46>: XML-20190: (Fatal Error) Whitespace required. Nested exception: <Line 9, Column 46>: XML-20190: (Fatal Error) Whitespace required.
 at org.dom4j.io.SAXReader.read(SAXReader.java:355)
 at org.dom4j.io.SAXReader.read(SAXReader.java:271)
 at org.dom4j.DocumentHelper.parseText(DocumentHelper.java:215)
 at com.stellent.cis.server.filetransfer.impl.ClientResourceHandler.uploadFile(ClientResourceHandler.java:242)
 at com.stellent.cis.server.filetransfer.impl.ClientResourceHandler.publishResource(ClientResourceHandler.java:155)
 at com.stellent.cis.server.filetransfer.SCSContentTransferStream.writeObject(SCSContentTransferStream.java:259)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
The message indicates that there is a parse error with the a xml file but I am unable to figure which xml file??
My adapaterconfig.xml file is as below:
<?xml version="1.0" encoding="UTF-8" ?>
- <config>
- <properties>
<property name="webPath">http://localhost:8888/cis-server</property>
</properties>
<jndi />
- <adapter default="true" name="ecm" type="scs">
- <config>
<property name="port">xxxx</property>
<property name="connectionTimeout">20000</property>
<property name="type">socket</property>
<property name="persistentConnection">false</property>
<property name="host">ecmserver.xxx.com</property>
<property name="eventPollingEnabled">true</property>
<property name="cacheEnabled">true</property>
</config>
<beans template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml" />
</adapter>
</config>
Please let me know pointers to this problem.
Thanks in advance.
Aparna
Edited by: user537651 on Aug 30, 2008 12:56 PM

Disabling the event polling has helped to some extent. I did not have any Command cache properties set and had event polling enabled. This came by default. Oracle support rep has told that he had seen miscellaneous errors with enabling the event poll while the chache properties are not set.
This has helped when I deploy cis-admin application to the Oracle 10g app server on a windows machine but again, when I do the same on another machine i.e. a unix machine (I doubt if operating system would be the cause) it did not work.
Thanks,
Aparna Raj Golla

Getting error when trying to enable ssl over pop3

We are using SunOne Messaging Server v5.2 on Solaris 9
We followed the below steps:
1. Create a trust database password for "Internal (Software) Token"
2. Obtain a certificate
3. Install the certificate along with CA certificate.
4. The certificate is installed with the name "Server_Cert" and is shown as trusted in the "Certificate Management"
5. configured ssl over pop3 using configutil
6. stop and start the services.
The Configutil changes made are as below:
nsserversecurity = on
encryption.rsa.nssslactivation = on
encryption.rsa.nssslpersonalityssl = Server_Cert
encryption.rsa.nsssltoken = "Internal (Software)"
service.pop.enablesslport = yes
service.pop.sslport = 995
We saved the below in the sslpassword.conf:
Internal (Software) Token:mypassword
After restarting the services, pop3 over ssl is not working.We also checked "netstat -an -P tcp | grep 995" and it shows nothing.
The logs are showing the below error:
"[22/Apr/2006:15:46:58 -0300] mail popd[26352]: General Error: SSL initialization error: Didn't find certificate Server_Cert (-8157)"
Please advice a solution for the same. I am unable to figure out the problem.
Your help will be highly aperciated .
Regards
Ehab

Hi,
have you checked whether the cert is in the certsdb using certutil?
thanks
ndrb

SMTP Error using webmail

Hi everyone,
I'm sort of new so pardon my ignorance.
I am having problems sending from webmail. I get the following popup error message "SMTP Error". No problems from email client.
I have already checked service.http.smtphost=logical ip and service.http.smtpport=25.
I am running IMS5.2 HotFix 2.01 on solaris 9. Sun Cluster 3.1u4. Any advice/help will be much appreciated. Thank you.
Parissa

Um, that message DID NOT come from Messaging Server, unless you've customized it.
Yes, you need to restart most any time you change a configutil setting.
Webmail is not guranteed to work when connecting to anything other than our Messaging Server.

SMTP Error when trying to send: saveSmtp failed

We installed iplanet messaging 5.2 on our cluster and when we try to send mail through the web interface we get an error that just says SMTP error. The logs displays these error messages:
Network Warning: saveSmtp: connect() failed
General Warning: saveSmtp failed: SMTP Error
If anyone knows what is causing this please help me out.
Thanks,
RM

Use configutil and make sure service.http.smtphost is set to your SMTP server. It defaults to localhost and you probably don't have anything listening on localhost:25.
-t

Consuming portlet get error ADF_FACES-60096:Server Exception during PPR

hi all,
i got a strange error when consuming portlet in webcenter portal application.
i'm using jdeveloper 11.1.1.5 and webcenter framework extension 11.1.1.4
i have a Portlet Producer Application and a Standards-based Java Portlet (JSR 286) in it.
The view page of the portlet is a jspx file (view.jspx)
There is a raw af:table component in the view.jspx file (with no data binding)
At this time, run the view.jspx in the portlet producer application.
The view.jspx page shows up in the browser and looks fine just as expected.
After deploying the portlet to WLS, i include the portlet to the WebCenter Portal Application's home.jspx as an ADF Rich Portlet (from the WSRP Producer in IDE Connections) and run the Portal project.
Wierd thing happens, a short time after the home page shows up in the browser, the portlet with an af:table in it shows up, but the portlet refresh itself repeatedly and an error is printed in the WLS log:
[Application wcApp0202 deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/wcApp0202-Portal-context-root/index.html
<JUApplicationDefImpl> <logDefaultDynamicPageMapPattern> The definition at portal.DataBindings.cpx, uses a pagemap pattern match that hides other cpx files.
<SkinFactoryImpl> <getSkin> Cannot find a skin that matches family portal and version v1.1. We will use the skin portal.desktop.
ADFPortletExternalContextImpl.encodeResourceURL: This resource is not using Stateless Proxying:/testP01/adf/styles/cache/portal-desktop-ctwpkz-zh_CN-ltr-gecko-prtl.css
<ConfigUtils> <getADFConfig> null
*<RegistrationConfigurator> <handleError> ADF_FACES-60096:Server Exception during PPR, #149*
java.lang.IllegalStateException: The expected request type is not the same as the current request type.
 at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.getExternalContext(GlobalConfiguratorImpl.java:333)
 at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$CacheRenderKit.<init>(FacesContextFactoryImpl.java:86)
 at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl.getFacesContext(FacesContextFactoryImpl.java:64)
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:260)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
 at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
 at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
 at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
 at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
 at com.bea.portlet.container.PortletRequestDispatcherImpl.forward(PortletRequestDispatcherImpl.java:292)
 at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRequest(BridgeImpl.java:1094)
 at javax.portlet.faces.GenericFacesPortlet.doBridgeDispatch(GenericFacesPortlet.java:700)
 at javax.portlet.faces.GenericFacesPortlet.serveResource(GenericFacesPortlet.java:291)
 at oracle.portlet.bridge.adf.application.ADFBridgePortlet.serveResource(ADFBridgePortlet.java:187)
 at com.bea.portlet.container.PortletStub.doResource(PortletStub.java:1043)
 at com.bea.portlet.container.FilterChainGenerator.runFilterChain(FilterChainGenerator.java:141)
 at com.bea.portlet.container.PortletStub.renderResource(PortletStub.java:779)
 at com.bea.portlet.container.AppContainer.invokeResourceStub(AppContainer.java:1376)
 at com.bea.portlet.container.AppContainer.invokeResource(AppContainer.java:1328)
 at com.bea.wsrp.producer.adapter.javaportlet.JavaPortletAdapter.getResource(JavaPortletAdapter.java:694)
 at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doGetResource(MarkupServiceHandler.java:766)
 at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doService(MarkupServiceHandler.java:295)
 at com.bea.wsrp.producer.handlers.AbstractServiceHandler.service(AbstractServiceHandler.java:71)
 at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:349)
 at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:250)
 at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:208)
 at oracle.portlet.server.adapter.web.WSRP_v2_Markup_PortTypeSoapToEndpoint.getResource(WSRP_v2_Markup_PortTypeSoapToEndpoint.java:128)
 at oasis.names.tc.wsrp.v2.bind.runtime.WSRP_v2_Markup_Binding_SOAP_Tie.invoke_getResource(WSRP_v2_Markup_Binding_SOAP_Tie.java:66)
 at oasis.names.tc.wsrp.v2.bind.runtime.WSRP_v2_Markup_Binding_SOAP_Tie.processingHook(WSRP_v2_Markup_Binding_SOAP_Tie.java:1445)
 at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:299)
 at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:442)
 at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1081)
 at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:333)
 at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:232)
 at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:185)
 at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:484)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
 at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.portlet.producer.container.endpoint.ProducerEndpointFilter.doFilter(ProducerEndpointFilter.java:34)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
 at java.security.AccessController.doPrivileged(Native Method)
 at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
 at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
 at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
 at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
 at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
 at java.security.AccessController.doPrivileged(Native Method)
 at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
 at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
 at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
 at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
 at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
 at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
 at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
 at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
I tried to delete the af:table from view.jspx, redeploy the portlet and rerun the portal, the home.jspx page shows up in the browser and looks fine just as expected.
But the same practice goes on well in jdeveloper 11.1.1.3 with webcenter framework extension 11.1.1.3
What is the problem ?
Regards,
Pen-Pen
Edited by: Pen-Pen on 2012-2-5 下午6:27

Hi Yannick,
Thanks for you reply.
I have edited the question with more details.
For your questions:
The error happens when the WLS try to render the portlet for the first time. (a short time after the home page shows up in the browser)
I'm a starter in webcenter & portlet, so i'm not sure if i use any portlet specific objects. I just create a Standards-based Java Portlet (JSR 286) with almost all the steps in default except in step 3 of 8, i change the view.jsp to view.jspx. In the portlet, i use ADF BC tech & ADF Faces. (There are readonly VO's from database 10g and AMs)
I think i got the error during PPR. (when the WLS try to render the portlet for the first time)
BTW: in the WebCenter Portal Application's home.jspx, i include the portlet as an ADF Rich Portlet from the WSRP Producer in IDE Connections.

SMTP ERROR in Messenger Express

This is iMS 5.2.
You compose a message in messenger express, click send then a greeted by a small popup window with the comtents that simply read "SMTP ERROR". In the http log (/msg-luke/log/http/http) you find:
[12/Jul/2002:15:18:26 -0500] luke httpd[15226]: General Notice: lebond[192.168.1.6] created message <[email protected]>
[12/Jul/2002:15:18:26 -0500] luke httpd[15226]: Network Warning: saveSmtp: connect() failed
[12/Jul/2002:15:18:26 -0500] luke httpd[15226]: General Warning: saveSmtp failed: SMTP Error
in /msg-luke/log/imta/tcp_local_slave.log-0GZ5007IZKEKA8
15:18:20.74: SMTP routine failure from SMTPC_ENQUEUE
Any ideas would be greatly appreciated.

I'm not convinced that these two log entries are related, could be, but I do not think so right now.
In configutil have you defined, service.http.smtphost? If not, the default, then it is set to localhost. Can you telnet localhost 25?
If you get a response on port 25 on the same machine then I would increase the log level of the MTA and try from webmail again. It is upsetting that the webmail client does not give you more of an error message, it really should.
-Chad-

"smtp error" in webmail when sending mails

Hello,
"smtp error" in webmail when sending mails
why?

With the very little data offered, I can only give a general idea.
"smtp error" usually means that webmail isn't pointed to a smtp server for sending out mails.
Webmail normally (by default) points to the same box it's on for sending mails out. You can change the host and port with configutil.
Some versions of webmail must point to iMS, and other mail servers won't work. Since I have no idea what version you have, I can't tell if this is a problem.
Did it ever work?
What version are you using?

Convergence 1u3 error

I am currently using Convergence 1u3, and I have a user who receives the following error when logging in:
"The request to the server has failed. The server may be down or the request contains invalid arguments. Please try the action again after a short time."
Once receiving this error, the page hangs and doesn't go any further. It should also be noted that this user has a relatively large number of mail folders. (~900) I did not see anything in the Convergence log that jumped out at me regarding this user. Also, I'm not sure if this is the cause of the above message but when the user attempts to login with Safari v4, the activity window shows the listfolders.mjs is timing out right before they receive the message. Logging on with Firefox also gives the same error. However, if the user reloads the page after receiving the error, it will usually log them in successfully.
My account has around 150 mail folders and I never receive this error.
Any ideas?

shjorth wrote:
What version of Messaging Server are you running (./imsimta version)?
Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:44:36, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (not compiled)
SunOS mmux1 5.10 Generic_142901-02 i86pc i386 i86pc
>
If you enable http (on the front-end) and imap (on the back-end) telemetry logging for the user, can you see where the delay is occurring?
http://wikis.sun.com/display/CommSuite/Monitoring+the+Message+Store
"Checking User IMAP/POP/Webmail Session by Using Telemetry"
I have set up telemetry for this user, anything in particular I should look for in the session file?
>
Have you configured the Messaging Server store.dbtmpdir setting to point at a temporary file-system (e.g. "/tmp/msg-hostname" on Solaris)?
I did not have that set originally, but I just added it with configutil and I have refreshed all of the mail backend servers. The user is still occasionally getting the error.
Regards,
Shane.

Messaging 4: SMTP fails to start with error: "There seems to be no Postmaster account"

Messaging Server's SMTPD does not start.

# /etc/NscpMsg start stmp
NOTICE: Starting SMTP daemon ...............failed.
ERROR: Failed to find process file after 60 seconds:
/usr/netscape/server4/msg-ms4-sun/config/pidfile.smtp
Unable to verify start of the SMTP daemon.
Check the log file(s) under: /usr/netscape/server4/msg-ms4-sun/log/smtp
ERROR: The following services failed to start, or were already:
SMTP daemon

The smtp log file says:

[10/Feb/1999:10:39:27 -0700] <server hostname> smtpd[8830]: General Error: Start
 up Problem: There seems to be no Postmaster account (if you have just
 installed the Netscape Messaging Server, you must run the Install
 program which accompanied the distribution). This account is required!
 Netscape Messaging Server Exiting!

<UL>
<LI>What is the exact address smtpd is looking for?

SMTPD will not start unless it finds an LDAP entry for a specific postmaster mail address.
The address is postmaster@<MESSAGEHOSTNAME>

Messaghostname is the
FQDN (fully qualified domain name) found in service.smtp.messagehostname.

Messagehostname can be found with configutil:

./configutil -o service.smtp.messagehostname

If the messagehostname is
not set, the email address is composed of the hostname (/usr/bin/hostname) +
service.smtp.domainname).

smtp.domainname can be
found with configutil:

./configutil -o service.smtp.domainname

<LI>Why is the "postmaster" a group?

By convention, this is an LDAP group created at installation. Since postmaster
is a shared role, a postmaster group of one is created upon installation. As a
group, additonal email members can be added easily.
Technical Support is not aware of any issues with a postmaster user, but this configuration is not supported.
</UL>

Hi Mikhail,
first of all, if your an official SAP customer, then please open OSS/CSS messages for such cases.
However, if you've got a Preview installation or similar, then we could proceed as is.
To solve your issue, we'd recommend a recovery using the latest data backup available.
To find out the cause of the problem (i.e. to find out what causes the problem with the blob/long), we'd need either:
1. system access* (pcAnywhere/WTS),
or even better:
2. your latest data backup AND we'd need you to put the DB instance into ADMIN mode and make a LOG backup. We'd need that Log backup then too.
This might get time consuming, so if you prefer a 'quick' around the problem, we suggest to perform the mentioned recovery.
Kind regards,
Roland
*: concerning system access: we can only access official SAP customer systems going over saprouters.

[ Error]: java.lang.IllegalArgumentException: Parameter 'configFolder'

Hi,
I am importing a track of ESS 603, MSS 600 and PCUI_GP 603 in NWDI using template build and I am getting the below error:
--cpid sap.com_SAPPCUI_GP_1 --dcvendor sap.com --dcname pcui_gp/isr/cfg --bvar default --trace ALL --root E:\usr\sap\NWP\JC01\j2ee\cluster\server0\temp\CBS\1\.B\25 --filepath E:\usr\sap\NWP\JC01\j2ee\cluster\server0\temp\CBS\1\.B\25 --logfile E:\usr\sap\NWP\JC01\j2ee\cluster\server0\temp\CBS\1\.B\25\DCs\sap.com\pcui_gp\isr\cfg\_comp\gen\default\logs\cbs-build.log --buildnumber 25 --buildprop JDK1.3.1_HOME=C:\j2sdk1.4.2_24-x64; --actwsisn 2
Aug 25, 2010 3:33:43 PM ...wd, String vfsdir, boolean localOnly) [ Debug]: root: E:\usr\sap\NWP\JC01\j2ee\cluster\server0\temp\CBS\1\.B\25, usr: <null>, pwd: *****, vfsdir: <null>, localOnly: true dontUseCBS: true
Aug 25, 2010 3:33:43 PM ...getDevelopmentConfigurationInstance() [ Debug]: rootFolder: E:\usr\sap\NWP\JC01\j2ee\cluster\server0\temp\CBS\1\.B\25, vfsRootFolder: <null>, isLocalOnlyMode: true, userName: <null>
Aug 25, 2010 3:33:43 PM ...tc.buildcontroller.CBSBuildController [ Error]: java.lang.IllegalArgumentException: Parameter 'configFolder' must be an existing folder.
 at com.tssap.dtr.client.lib.vfs.config.impl.Configuration._initConfigFolder(Configuration.java:281)
 at com.tssap.dtr.client.lib.vfs.config.impl.Configuration.<init>(Configuration.java:182)
 at com.tssap.dtr.client.lib.vfs.config.Configuration.getConfiguration(Configuration.java:45)
 at com.tssap.dtr.client.lib.vfs.config.Configuration.getConfiguration(Configuration.java:37)
 at com.sap.tc.devconf.impl.ConfigUtils.getConfiguration(ConfigUtils.java:337)
 at com.sap.tc.devconf.DevelopmentConfigurationFactory.getConfiguration(DevelopmentConfigurationFactory.java:1588)
 at com.sap.tc.devconf.DevelopmentConfigurationFactory._getDevelopmentConfigurationInstance(DevelopmentConfigurationFactory.java:436)
 at com.sap.tc.devconf.DevelopmentConfigurationFactory.getDevelopmentConfigurationInstance(DevelopmentConfigurationFactory.java:1906)
 at com.sap.tc.buildcontroller.CBSBuildController.getConfiguration(CBSBuildController.java:708)
 at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:515)
 at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:452)
 at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:324)
 at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:262)
 at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:217)
 at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:178)
Thank you.
Regards
Narsimha
Edited by: Narsimha Kantipudi on Aug 28, 2010 2:32 AM

Dear Narsimha,
Error]: java.lang.IllegalArgumentException: Parameter 'configFolder' must be an existing folder.
please proceed as per the note:
#1438770 -- All DC builds fail with an IllegalStateException
I also send you a link which guides you how to adjust the parameter BUILD_TOOL_VM_ARGS
http://help.sap.com/saphelp_nw70/helpdata/en/53/75b3407e73c57fe10000000a1550b0/frameset.htm
Best Regards,
Ervin
Edited by: Ervin Szolke on Aug 31, 2010 2:23 PM

PAB_CMD_GET_PABS returns error code 15

hi,
i'm running iPlanet Messaging Server 5.0 SP2 on Solaris with Netscape Directory Server 4.12.
I encountered this error 'PAB_CMD_GET_PABS returns error code 15' when i access mailbox's addressbook.
Does anyone know what could have caused this and how to resolve?
many thanks..
-AL.

I think it is only due to the account "msg-admin-xxxxxxxx" which is created when installation and used for iMS' bind dn to search LDAP server for user looking_up.
The old msg-admin-xxxxxx's password does match the one in your new system ( Mainly at 2 places: one is ugldap......, and the other is pab...... - you may run <serverroot>/msg-<instance>/configutil |grep ugldap and ...grep pab to find the correct entry).
My solution is to run ...../configutil -o xxxxx.xxx.xxx -v "password" to the 2 entries then restart your msg services. Try pls.
good luck.

Configutil Error

Similar Messages

Maybe you are looking for