Problem while activating the DSO

Hi-
I have some invalid characters in the reference document number which is causing not to activate the DSO. I found the document numbers which is causing the problem. They are not more than 2, so I thought to put a filter in the DTP. It is not allowing me to exclude the document numbers in DTP. It is only allowing me to keep the single values.
Please let me know how to exclude the affected document numbers so that my DSO gets activated.
This is a production issue and please get back to me with ur suggestions.

Hi n p,
              In DTP screen at filter>mutlipule selection>exclude single values-->multiple selction..you can check the seleted the values to which you want to exclude them into filter.
Hope this help you
Thanks,
Praveena.

Similar Messages

  • SID Generation Error while activating the DSO.

    Hello Gurus,
    Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
    In dump error, DBIF_RSQL_SQL_ERROR
                        CX_SY_OPEN_SQL_DB
    SQL error in the database when accessing a table.
    So please advice me to solve this problem would be appreciated and reward points.
    Arun

    Hello Arun kumar,
    That's easy you have errors in the field 0REF_KEY3.
    Since it is a DSO it let's you load everything but in the time of the activation it complains!
    The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
    Try to find that record, change it in PSA and reload the request again.
    TCode-E3//Rec.Typ-CO
    The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
    Try to see if you have more records like those and fix them too.
    That should work.
    Please assign points if it helps,
    Diogo.

  • BI7.0 Hexdecimal values problem while activating the data in DSO

    Hi Friends,
                     I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
    Error when assigning SID: Action VAL_SID_CONVERT table
      0DOC_HD_TXT     
    Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
    Process 000037 returned with errors.
                it isn't accepting the values like with numberels and chars together
    ex: 1st disb, 70 cr Gen Hsg.
                   I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
    Regards,
    BalajiReddy

    Hi Anil,
                       Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                          Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
            pls tell me the reason, i'm really thankfull for your quick replay
    Regards,
    BalajiReddy

  • RFC problem while activating the new ODS...

    Hi Experts,
    I have created a new ODS, while activating that it is giving bellow error message,
    RFC ERROR IN THE SOURCE SYSTEM.
    but I have checked with my basis team, everything is fine,
    What would be the problem.
    helpful answer will be appreciated with points,
    Thanks in advance,
    Venkat.

    hi all,
    iam even getting the same error and unable to solve this.please provide me solution with step wise process.iam getting the below error:
    Message no. RSBM035
    Diagnosis
    The system could not create DataSource .
    System Response
    The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
    Procedure
    Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
    thanks&regards
    Vamshi

  • Error while activating the ODS

    Dear Experts,
    Please help me out,
    I am facing one problem while activating the ODS of 0FIGL. Data is uploaded successfully into the ODS but while activeting the ODS, it gives the following error message :
    Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
    Value 'SWITCH 24 PORT MANAGED -I' (hex. '00530057004900540043004800200032003400200050004F00') of characteristic 0DOC_HD_TXT
    SID determination finished for InfoObject 0DOC_HD_TXT
    I have also read out all the related post & also applied them in this but still the position is same.
    also in RSKC, all the characters are allowed.
    please suggest.
    Thanks in advance
    Neha
    Process 000090 returned with errors

    Hi,
    Pliz go thru below article for restricting Invalid chars.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
    It might give u an idea or solve your issue.
    Thanks,
    Jitender.

  • Issue related with the Date Format --- error when activating the DSO

    Hi Friends..
    plz help me to fix the issue ...im getting when activating the DSO...
    Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
    is there any routine to solve this or i have to go for data selection in info package ......
    I have searched in the forum also..but im not able to fix..plz help
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
      Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
      Value '20101502' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
      Value '20101402' of characteristic 0DATE is not plausible
    Thanks
    Baskar
    Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

    Hi Friends..
    plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
    Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
    Value '20101502' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Thanks
    Baskar

  • Having problem while activating my product please help

    having problem while activating the product

    gifted,
    Depending on your version, you may try a chat here or here:
    Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html
    Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service1.html

  • Error While Activating the CO-PA DSO

    Hi Friends
    As i am new to CO-PA . I am facing problems while activating DSO.
    Error : Short dump has not been completely stored (too big)
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
      because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis :
        You attempted to assign a field to a typed field symbol,
        but the field does not have the required type.
    Please Suggest me
    Thanks
    Gowtham

    Hi Fathima
    Here is the screen description
    Short text
        Type conflict with ASSIGN in program "GPDI1O4GBC7CYZNYW1LK35LKP6J".
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
         because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to assign a field to a typed field symbol,
        but the field does not have the required type.
    Trigger Location of Runtime Error
        Program                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
        Include                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
        Row                                     886
        Module type                             (METHOD)
        Module Name                             EXECUTE
    Thanks
    Gowtham

  • Error coming while activating the data request at DSO level

    Hi to all,
    please can anybody tell me the solution for that.
    While activation the data request at DSO level  , i am getting error .
    Value 'R2S-11.60UML  ' (hex. '5200320053002D00310031002E003600300055004D004C00A0') of char
    Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
    Process 000001 returned with errors
    this error is coming under SID Generation .
    I shall be thnakfull to you for this.
    Regards
    Pavneet Rana

    Hi Rana,
    Activation failed because of the special characters in the Omaterial
    Delete the request in target
    edit it in the specific record in PSA and load it back
    In your case i think its a space problem u can see a space after L
    delete the space for the record and load it again
    Regards,
    MADhu

  • Error while Activating the Standard DSO

    Hi,
    I am getting the below error while Activating the Standard DSO.
    Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
    I tried searching the forum , but didnt find any answer.
    Any suggestions are welcome.
    Thank you,
    Adhvi.

    Hi,
       Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
      If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
    You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
    Thanks,
    Divya.

  • Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

    Have an existing ex2010 sp3 organization.
    Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line.  I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
    still get the same error.  The error itself in the log is pretty useless:
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
    [05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
    [05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
    [05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
    [05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
    [05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
    [05/07/2013 01:19:40.0496] [0] Starting file's copying...
    [05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
    [05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
    [05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
    [05/07/2013 01:19:59.0762] [0] File's copying finished.
    [05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
    [05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
    [05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    [05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
    [05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
    [05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
    [05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
    [05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
    [05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
    [05/07/2013 01:20:12.0044] [0] The following roles are installed:
    [05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
    [05/07/2013 01:20:12.0075] [0] Server Name=WEX1
    [05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
    [05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
    [05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0841] [0] Applying default role selection state
    [05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
    [05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
    [05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
    [05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
    [05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See
    the Exchange setup log for more information on this error.
    [05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:21:04.0154] [0] End of Setup
    [05/07/2013 01:21:04.0154] [0] **********************************************

    Hi,
    The cause is clearly described in the log:
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    I'd suggest you check NIC settings and AD configuration.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • Error while activating the request of DSO upload

    Hi all,
    While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
    'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
    Is it because no translation exists,if so what should be done for the same.
    Thanks in advance,
    Chintu.

    hi Chintu,
    it seems unit BBL not exist in your bw system,
    you can update the unit master from r/3,
    have you performed 'transfer global setting' ?
    check in r/3 table t006a (t006*), if exist you can
    rsa1->source system->right click r/3 source system
    'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
    this update should be scheduled periodic, menu program->run in background and schedule periodic job.
    if BBL not exist in r/3, you can manualy maintain,
    transaction CUNI.
    hope this helps.

  • Error While Transporting the DSOs

    Hi Experts,
    I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
    The creation of the export DataSource failed
    Reading the Metadata of APMD0009 ...
    Creating DataSource 8APMD0009 ...
    Password logon no longer possible - too many failed attempts
    Password logon no longer possible - too many failed attempts
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object APMD0009
    The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
    I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
    Can anyone please help me out with this problem.
    Thanks,
    Shalaka.

    Hai shalaka,
    jus check some points in u r transportation.
    check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow  after,or in data flow before ,might be u have selected the in data flow before ,so the datasource  error is happening here
    check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
    Suri..

  • Error while activating the data source.

    Dear all,
    We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
    0PM_OM_OPA_2 the following error is displayed.
    "No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
    Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
    "You can only edit 3.x DataSources using transfer rule
    maintenance Do you want to create the transfer rules now?"
    What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
    Valid experts comment is expected in this regard.
    Regards,
    M.M

    Hi Magesh,
    Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
    Hope it helps..

Maybe you are looking for