Confirmation button is disabled Stand alone scenario

Hello ,
We are using SRM 7.00 , Stand alone scenario.
We need to create a confirmation upon a shopping cart that has been procceced to PO with status 'Ordered' .
The button 'Create Confirmation' is disabled .
We implimented ABAP role /SAPPSSRM/EMPLOYEE and Portal role Employee Self Services .
Thanks,
Malki Shacham
MM - SRM consultant

Hi Malki,
Did you get this issue fixed?
We are also facing similar issue in SRM 7.0 Ehp1 stand alone scenario.
The Shopping cart has got successfully converted to P.O and the P.O is in ordered status and the 'Confirmation Required' check box is checked.
In case this issue has been fixed can you let us know the resolution ?
Early response would be highly appreciated.
Regards,
Teja

Similar Messages

Purchase Order in Stand Alone Scenario

Hi experts
i'd like to know if is possible to create a Purchase Order in SRM 5.0 (stand alone scenario) with position "Limit".
I'd like also to know if is possible to create Purchase Orders with 2 or more lines.
I'm sure that is possible to creat Shopping Cart with position "Limit".
Regards
Andrea

Hi Olga,
Are you creating RFQ from scratch or from Sourcing Cockpit ?
If from SOCO, the Bid data can be completed with originating SC data. Otherwise data needs to be completed.
Have a look at "processing bids" part of bidding engine help:
http://help.sap.com/saphelp_srm50/helpdata/en/d3/133dcd5641b244a60578baa996a597/content.htm
It is stated that in case of contract creation, you have to complete the "user-defined" contract item to add data, for example product or vendor product number.
For PO creation, there is nothing about "user-defined" items.
I analyzed this process in an SRM 5.0, and it looks correct: added items are passed to the PO.
For local PO creation, all the logic is done in BBP_QUOTE_PO_CREATE.
Here are steps for SRM 5.0
- read quote details (items and additional items)
- read RFQ details
- retrieve RFQ long texts
- fill PO header and complete it with ACS & BUK attributes of connected user
- merge normal & supplier added items (GOOD !!!!!)
- process items
- complete partners
- process texts
- process attachments
- BADI to determine purch group
- create the PO with BBP_PD_PO_CREATE
So it should work.
Debug this process starting with function BBP_QUOTE_PO_CREATE, or open an OSS message.
Rgds
Christophe

Confirmation button is disabled

Hello Gurus,
I have an issue which is very critical in my project now.
The confirmation button is disabled in central confirmation and Purchasing work centers.
In the PO the Goods Receipt is required is Flagged On.
Please give your suggestions.
Regards
Madhan

Hi ,
    If you made any changes to the SRM PO then Please check in BBP_PD transaction for that PO any change version
    document is closed or not.If it is not closed the GR confirmation button will be inactive.
    For PO change version the Document should be closed.
    Reason : 1 .Please check the PO workflow went in Error ( Then Backend transfer will fail and I1080 Status is active still )
                   2. PO change version workflow executed successfully and there might be chance of failing database update task
                        while updating the PO.
   Regards,
Devi

FM for getting PO details in stand alone scenario

Hi Experts,
we are running a standalone scenario in SRM
we need to pull the PO details that have schedule line item schedules and item service entries.
can anybody help me out.
Thanks&Regards,
Praveen

Hi Jay,
when i execute the function module BBP_PD_PO_GETDETAIL the schedule line items table is empty, i am not getting any data
.could you please suggest some other way so as to get the concerned details.
BR,
Praveen

Why my confirmation button is disabled?

Dear expert,
Please help on this, after I created the PO and send to the supplier in SRM, I can not create the confirmation of the PO.
Thanks very much.
Regards,
Hayashi

Hello Hayashi,
There could be multiple things i would recommend to check;
- Can you please validate BBPGETSTATUS 2 job is executing correctly and updating the status. You can ad-hoc base run the program for particular shopping cart to update the status.
- 2nd point is check in ECC PO --> Line item Confirmation per below screen shot and see if there is anything. If you have Inbound delivery or Rough GR that could be holding you back to perform confirmation. This configuration comes from Vendor master --> Purchase organization section.
Hope this helps.
Thank you
Ritesh

Confirm button disabled for Reporter in Solman 7.1 SP10, Incident managment

Hello,
we are using CRM_UI for Incident managment. When the ticket is in status "Proposed Solution" , Reporter is not able to confirm the ticket, "Confirm" button is disabled. How to enable this button?
Renato

Hello Renato,
Please check authoraziton object b_userstat mentioned at belowed thread:
Reporter not able to confirm the Incident in SolMan 7.1 SP6
BR,
K.

E-Recruitment Technical architecture design for stand alone

Hello,
I looking at various options to implement E-Recruiting in a stand alone scenario.
One option i know is where my HR Data is in ECC6.0 and E-Rec component is in other ECC6.0 system and i can interface the data through ALE and RFC's.
When we talk about E-Rec in standalone (without ECC), how would be technical architecture look like.
Please help me with some inputs.
Best Regards
G Raj

Hi Raj,
Am not sure what are the exact details that you require. I have given a few pointers which may be of use.
Incase eRecruiting is on a different server then the transfer of data (PA & OM ) will be through ALE & idocs.
The transfer of data from eRecruiting to ECC is through RFC where only a set of 15 fields can be transferred back. There is also a newer option to use XI for this.
The standalone server usually has only the erec component & no other HR module (Pls chk the installation guide on this point)
A few BADIs need to be activated in the erec server
When an internal employee(object P) is transferred here, a corresponding object NA(candidate) & BP(business partner) is created.(This is because of the BADI activation)
Incase of an external employee , the moment he registers, an object NA ,BP ,CP is created.When he is hired into the system, there is an object P created with a New CP which then will have to be coonnected to the original NA.
Change pointers will take care of synchronisation of data between both the servers.
The relationship between the various objects are seen in infotype 1001 in the erec system.
The advantage of using this scenario is that core HR is not exposed to external people as the erec server talks with the external world.
Incase of webdynpro ABAP as UI, you can have separate fron-end & back-end.
Regards,
Sowmya

Return Delivery button is Disabled for Goods confirmation

Hi,
We are on SRM_SERVER 550, SP11, SAP 4.7 backend and have configured Extended Classic Scenario.
I am unable to do Goods Return delivery for Confirmations which have status u201CPosted in the Backendu201D.
The Return delivery button is Disabled, while the Delete button is Enabled, when I access confirmations through u2018Display and Process Confirmationsu2019 screen.
We have also run the jobs CLEAN_REQREQ_UP and BBP_GET_STATUS_2.
Kindly let me know if any additional job needs to be executed or any specific note that needs to be implemented.
Thanks,
Kiran

plz wait for some time . I am pretty sure STATUS JOB do this job . what variant you used for status_2 job?
if you could do it backend , but if you could not in srm means, that PO status was not updated.
even i had experience this in classic, i evening did GR inSRM and immediately wanted to do return delivery but that button was disabled for me. morning i saw it was ok . i saw RETURN was active.
muthu

Purchased stand-alone copy of LR in 10/2013. Got a message that Development module is disabled.

I upgraded from LR 4 to LR5, purchasing a stand-alone version of Lightroom in 10/2014 (less than three months ago) for my PC. In accordance with instructions from Adobe HELP, I downloaded a second copy of the software to a new Mac in preparation for switching computers and discontinued using the original PC version. I had to hire a consultant to assist with the transfer of photos due to lack of specific instructions from Adobe regarding a PC to Mac transition, but by early December the transition had been accomplished and LR (now 5.7) was functioning for approximately two weeks. Shortly thereafter the Development module was disabled with a message that I needed to renew my membership to reactivate the Develop Module! I never had a membership... I purchased the stand-alone version of the software and wish to use it rather than the subscription version.
Added to all my problems with the transition is that we hosted guests for the holiday season and I was unable to show them any of my recent photographs due to the Develop module being disabled. (My guess is that Adobe is not going to compensate me for this inconvenience!)
As far as I can determine, this is nothing that I have brought on myself. Adobe allows the download of two copies of the LR software and I haven't exceeded that, and I called Adobe Help specifically to ask how to accomplish the PC to Mac transition and was told to download the LR software to the Mac.
So how do I reactivate the Development module without paying additional money for a subscription?

But to answer your question directly, you have installed the creative cloud installation of Lightroom which requires different licensing. You have to uninstall and then download from the standalone website.
Product updates

How can I get my stand alone Lightroom 5 to work in the Develop function? It's disabled

My Lightroom 5.6 is stand alone. I once subscribed to creative cloud, but I cancelled it because it was too complicated to use. Now, somehow the develop module of my stand alone 5.6 lightroom is disabled.It says please renew your to reactivate your membership. My software is stand alone, and I don't want to reactive creative cloud. I want to get rid of it. How do I do this?

You get the develop module to function properly by installing the standalone installation of Lightroom. If the develop module is disabled you still have the creative cloud installation. It will have to be removed. You can download from here:
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
Performing this uninstall/reinstall will have no impact on your images or the work you have done in Lightroom. The catalog and your images are left intact.

Is it possible to place forward/back nav buttons in a timeline based gallery. Stand alone SWF needed.

I'm currently working on a gallery to be output as a stand-alone SWF file, and am doing it all on the timeline as I can't write actionscript for toffee
So far, I have the gallery created with alpha tweens fading between embedded images. These images are buttons, to which I have added URL links (my only foray into actionscript), which will send the user to a specific link related to the image being shown at the time. At the moment this is just a linear timeline that flows from start to finish and loops to the start again - as per most other simple timeline based animations.
I have now been asked if I can add two nav buttons (one each side of the frame) to allow the user to flip back and forth through the images. Is this possible on a timeline? And if so, how would it best be implimented? I just don't know if a button action can affect the flow of a timeline.
Ideally the gallery will auto flow, until either of the forward/back nav buttons are clicked.
Any help here would be really really appreciated.
Paul

Thanks for that Ned. I've had a quick look, and will research deeper later. Though being a complete and utter novice at actionscript, I am flummoxed by probably the simplest of stuff by your standards. For example, the scripts I saw briefly, using the searches you suggested appeared to not export a stand alone SWF file - with no XML files or image folders (I'm still to work out if is possible to do that for this particular use). Also, on all of the examples I saw, the buttons are embedded at the bottom of the pane, and I really need to put the buttons as plainly obvious clickable blobs on either side of the image area. This, again, I can easily do on a timeline (apart from actually making them work of course) but to do this with someone else's AS code, will need more time than I have to learn the relevent stuff.
Does it sound like I may have to just settle for a linear, non-interactive rotating gallery? - based on my knowledge limitations, as well as needing a stand alone SWF.
Paul.

Compiz as stand-alone + xfce4-panel : a few questions

After some months with gnome 3 I decided to go back to compiz, as I used to use that with gnome 2.xx and appreciated it quite a bit. I ran into a few problems when trying to set it up properly.
First, is there some way to enable session management with compiz? I would like to be able to have a button or menu that offers to sleep, reboot or shutdown the computer. Not that I mind using 'pm-suspend' and other commands like that, but my girlfriend also uses the computer sometimes so it needs to be more user-friendly than that. I noticed there is an actions button by default in the xfce panel but it doesn't work in compiz and just says 'session management is disabled, do you want to exit X' or something like that.
Second, I need some sort of run prompt when I hit alt-f2. The 'gnome compatibility' option in ccsm doesn't seem to work in standalone mode.
Third, I want the computer to automatically sleep when I flip the lid. In gnome 3, it does that without any special configuration, but this doesn't work with compiz as a stand-alone. I suspect I need to configure it to pick up the 'lid is flipped' event somehow?
Fourth, I need a volume control option that will display a volume icon in my xfce4 panel notification area and most importantly I need that volume control icon to respond accurately to the input from my 'mute' and volume 'up' and 'down' buttons. It's a thinkpad x220 laptop. I bring it to school often, so being able to know whether my volume is on or off is important when in class. This works fine in gnome3 but I have tried other DE's such as LXDE and found that the volume icon stayed the same as I used the volume buttons on the keyboard (the buttons did work, so it could be muted but still displaying that it's at full volume). To check if it was muted or not, I had to open a terminal and use alsamixer.
Of course, I don't NEED to be using xfce4-panel. What I need is a menu, and automatic menu generation is nice because it's easier to configure. So I picked that one because I've used it in the past. If there is a better alternative, please recommend it. Or perhaps it would be best if I simply ran gnome fallback and compiz as the WM?

I'm using compiz standalone, so here's how i solved that stuff.
You can use obshutdown for session management, it's in AUR, look in its config file, slap a launcher in the corner of you panel, set the icon for prettyness and it works pretty well.
I use gmrun as a launcher, set alt+f2 to call it. It's pretty simple which is what i like. You can also use synapse, or gnome-do, they have more functionality like searching your bookmarks, your files, your loved one's medical history, you name it.
For volume control, you can use pnmixer from aur, it sits in your system tray, and you can set it's hotkeys, but you can also use CCSM to set your hotkeys for volume management.
I think laptop-tools(check the wiki) can be used to put your computer to sleep, and general powersaving. You should check the article named laptop in the wiki for other laptop-related stuff too. I think i used xfce4-power-manager for power management as well a while ago.
I used xfce4-panel for a while but i didn't really like it as much as i liked the old gnome-panel, so i installed mate-panel(which is the old gnome-panel). You can find it in AUR, or you can check it's wiki article for repos you can add for mate(if you want to install it from aur, it will pull some aur dependancies, and i didn't feel like compiling everything).

Button is disabled or not in the next page

i have a scenario i have two JSP pages in which from the first we will be redirected to the second page. in the second page we have a save button. the save button will be disabled in some conditions. if the save button is disabled then we have to keep the first page as read only. we can't modify any feilds in that.
thanks in advance.
please help me its very urgetn for me.
once again thanks alot in advacne.

Just test those conditions in the 1st page as well.

Recording Stand-alone Soft Synths & Virtual Instruments in Audition 3

Hi People,
Have a little problem which I'm struggling to figure out.
I have been using Cool Edit Pro for several years. My set up has always enabled me to record any standalone Software Synths via my sound card. I have always had it set up so my sound card plays through patch one and records through another patch enabling me to record in the multi track editor with no problems at all and my set up records only the soft synth/instrument, and not any waves previously recoded. Instead just plays them back so I can build up my music and play along at any given time. Although this is a rather different approach to doing things, it suites me down to the ground and I'm happy to create this way
My problem has come upon whilst trying out the new Adobe Audition 3, which is based around ASIO Drivers. Because of this I can no longer run another program (Stand alone soft synth), because Adobe hogs the ASIO driver and will not allow another program to be run at the same time. I can use the Adobe windows driver for audition no problems and I am able to continue recording how I did with Cool Edit, but I would much prefer to go along with auditions ASIO drivers to make sure I am recording with the best quality and reliability.
My Sound card is an E-MU 1616 with breakout box. I have tried numerous ways with the patch mixer to get around this, for example I have tried using my sound cards driver for audition and ASIO4ALL2 for my soft synths. One of which is Hypersonic 2, and the other being SampleTank. I cannot for the life of me get my set up and running how it was with cool edit.
I must admit that although I have played around with my settings, it could be something simple I need to do that just hasn't jumped out at me yet. My evaluation of Audition 3 runs out in 20 days and I'm almost sure that there is a way to enable my set up to work how I want it to before I can go out and buy Audition 3. I'm very comfortable with audition 3, naturally. I love the changes and extra features it has now along from the cool edit days.
I have looked into other solutions as well after scouring message boards, one of which was Cycling 74 Soundflower, this sounded like it could be an answer but unfortunately it is Mac only. If Adobe did Audition for Mac then I wouldn't hesitate in going down that route...
My other solution is to have a second computer, either a modified mid range P C, or even a Mac, to act as my synth station and have my various software synths and such running on there and playing out to my recording PC with Audition on. This would free up the ASIO to be used by Audition solely. It's a long way around but wouldn't cost the earth and would be a simple enough idea to set up. But surly, I shouldn't need to go this far out to get my ideal setup.
Anyhow, I would much appreciate any advice and ideas to help me solve this problem; I will keep working at it in the mean time.
Hope my explanation makes sense above, I can appreciate that there are other ways like just going along with another program and such, but in all honesty I like the way I work and don't really want to move on, I'm more bothered about just getting on and recording new ideas in the environment I'm so use to. I love the way Cool Edit/Audition works for me and I have developed my own methods with the software over the years. Working with just audio suits me to the ground as I record and chop up my own Guitar bass and drums, along with sounds from my field recorder and a host of other methods and ideas.
Thanks in advance

Hi!
As long as your softsynths comes in the VSTi format (most of them do now), you can insert it on a track in Audition, which has 'host' capabilities from V3.
In the Multitrack, insert a new MIDI track from the 'Insert' menu (note: MIDI Track, not just 'MIDI').
On that track pane hit the 'Sequencer' button, and it will open in a separate window. In the pane left of the keyboard you can insert your VSTi of choice, and make your MIDI connections.
Back on the Main track pane, engage the 'L' button for Live monitoring. Actual recording (of MIDI) is done in the Sequencer window.
The usual, and recommended workflow is to keep the MIDI tracks 'open', i.e. you can edit the sound in your instrument and even the notes played at any time in the process, compiling the actual audio as the last step in the mixing.
If you kind of 'insist' on doing it the old way, you can export the audio from your recorded MIDI+VSTi creations track by track like this: Leave the Sequencer window open, make a selection in the multitrack that covers the time span you have played. Solo the track (will mute all others), and use File / Export Audio Mixdown. Use 'Master' as the source. This will give you a wave rendering of what's currently in the MIDI sequencer. Qualitywise this is better since it's all internal and digital instead of in/out of soundcards with DA/AD conversion etc.
I haven't found a method for a 'live' wave recording while you play, but there may be one...
If you purchase Audition it comes with Help files explaining this in more/better detail. ;)

Everytime I try to pay with my cc on paypal, I enter all of my infor and after I press the "review and confirm" button the same page reopens but has erased only my cc #, exp date and security cvv number. What could be wrong?

b.stats.paypal.com : server does not support RFC 5746, see CVE-2009-3555
This appears on my error page everytime I try to use my credit card through paypal. I enter all of my info (billing, etc..) and after hitting the "review and confirm" button the same page reappears and has erased my cc number and leaving my name and billing info. What can I do to finish my transaction?

The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".<br />
* http://wiki.mozilla.org/Security:Renegotiation
You may have a problem with the PayPal cookies.
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Cookies#Removing_cookies
* [[Cookies]]
* [[Enabling and disabling cookies]]

Confirmation button is disabled Stand alone scenario

Similar Messages

Maybe you are looking for