Confirmation for items

Hi,
We have a client requirement in SRM4.0, to write a report which will give PO items which have crossed the delivery date and for which Goods Receipt (Confirmation) has not been done. I was thinking of using the following logic.
Query table BBP_PDIGP where deliv_date for PO item = sytem date - 1. Get the GUID for all items where deliv_date = systemdate - 1. Then check for all these items whether Goods receipt has been done.
My question is that if I have the PO item GUID, how do I check whether Goods Receipt (confirmation) has been done for that item? Are there any function modules that will help?
Thanks,
Mick

Thanks Disha.
What I am going to ask might sound very stupid, but I am a little confused.
In FM BBP_PD_CONF_GETLIST when I give the I_Object_Id as shopping cart number and in table I_Header_GUID, the header guid for the shopping cart, it does not return any values. I am not giving any value for RFC target system, sincewe are implementing the extended classic scenario.
For FM BBP_PD_CONF_GETDETAIL , in I_GUID, I am passing the shopping cart GUID and in I_OBJECT_ID, I am passing the shopping cart number. In tables E_HEADER_REL and E_ITM_REL, what is being retrieved along with shopping cart data is PO data. There is no confirmation data. Am I checking the right tables of the FM's?
Please help!!!!
Mick
2>BBP_PD_CONF_GETLIST-->to get the confirmation list based on Reference

Similar Messages

  • Error Invoice for items "Service"

    Hi Experts,
    I work in SRM 7.0 (support package SAPKIBKV09).
    I configured a extended classic scenario with SAP ERP ECC 6.0.
    I created a Shopping Cart, Purchase Order and Confirmation for items "Service" in SRM.
    When I try to create the Invoice, display the following error messages:
    - No item could be inserted from purchase order XXXXXXXXXX
    - Purchase order contains no items for invoicing
    Can anyone please help with issue?
    Thanks a lot.
    BR

    Hi,
    Have you resolved the issue.
    I have faced same problem recently.
    Regards,
    Yanivy

  • Confirmed Quantity for Item in sales order

    Dear All,
    In one sales order there is confirmation block (this is through the delivery block in the sales order header level).
    The sales order contains BOM (header and it's sub items) and some standard items also two third party items.
    When the sales order is saved there are no confirmed  quantity for any of the item except the BOM header.
    May I know what could be the reason to have this BOM header confirmed quantity..???  this is leading to a problem in the data from sales order.
    Is there any customizing related to this item (item category or schedule line category) to look out for..??
    Thanks & Regards,
    Vishi...

    hello, friend.
    your issue is quite broad.  outcome depends on -
    1.  configuration of delivery block (which, in your case, we can assume to include confirmation block)
    2.  selection of availability check and MRP type in material master
    3.  schedule line category and schedule line determination
    now in standard, if the order line item category is TAN, and MRP type is PD and availability check is PD... the system might temporarily confirm the item even when putting a delivery block at header level, but the system  should delete confirmed quantities when you save the order.  you can check the confirmed quantities when you open the sales order in change mode... the confirmation should be zero.
    however, in third party items (item category TAS), these items are normally confirmed even in change mode.  this may hold true if either MRP = none (e.g. ND) and/or if availability check is KP (no check).
    nevertheless, regardless of confirmation quantity, the system should not allow creating of delivery while delivery block is in place.
    please try these scenarios and post your feedback.
    regards.
    jy

  • Percentage wise Confirmation for Multiple Service line items

    Hi,
    Percentage wise Confirmation for Multiple Service line items    
    During doing service entry sheet am able to do % wise confirmaion from
    Menu -> Entry Sheet -> Create -> With Planned Service -> Enter Percent.
    But this works only for single line item the first line.
    If we have multiple line items & if i give 10%, It calculates 10% for
    all items.
    We want Line wise % confirmation can be given as % confirmation will differ from
    line to line.
    Thanks
    Shashank

    Dear ,
    This percentage is a header data i.e applicable for all service items
    F1 help clearly says
    Percentage quantity to be adopted
    Use
        If you wish to adopt the planned services from the purchase order, you
        can enter an additional percentage in this field in order to have that
        percentage adopted instead of the total quantity shown in the purchase
        order.
    Example:
        Quantity specified.............Quantity to be adopted:.............Quantity specified "
        in purchase order:....................... 10 %..................................entry sheet:
        Service  1.......100 pc ................................................................10 pc
        Service  2.......200 m  ...............................................................    20 m
        Service  3. .....30 h   .................................................................   3 h
    Edited by: redriver on Jan 22, 2012 6:50 AM

  • Automatic TO creation and confirmation for a Material document

    Hi Dear All,
    i am new to MM andWM.
    I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
    SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
    Double click on ‘control data ‘tab
    Hear for my warehouse I given input like   Auto TO = ‘1’,
                                                                             AddId = ‘select check box’.
    And in ‘Assign control’ tab for 101 movement type I have given input like below.
    Automatic TO = ‘1’.
    TO item can be confirmed immed. = ‘tick checkbox’
    Propose Confirmation = ‘tick checkbox’.
    Foreground/Backgrnd = ‘D’.
    After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like ‘TO processing finished: TR total:   17, TO created:    0, Errors:   17’.
    If I check header details of transfer requirements in LB03, i am not seeing ‘Tick Mark’ in Auto TO Creation field.
    Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
    Thanks in Advance..

    Dear Steve,
    Thanks a lot for giving reply with what I need to do, but I am unable to see result.
    I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
    Click on ‘Assign’ button,
    Press on ‘New entries’
    WhN = ‘900’
    Reference Movement Type = ‘101’
    Movement indicator = ‘B’
    Movement type for Whse Mgmt = ‘101’
    TR create Transfer Requirement = ‘X’
    Immed.TO Creation
    Mail confirmation for background processing = ‘01’.
    GR date = ‘2’

  • Automatic TO Creation and Confirm for the 321 Mvt type

    Hello Experts,
    Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
    I have already activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe
    2.TO item to be confirmed immediately
    3.Propose confirmation
    Table T333 -AUTTA
              T333-SQUIT &
              T333-VQUIT is activated.
    Please let me know any other settings to be performed
    Regards
    Krishna

    Hello Experts,
    I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
    I made the below settings
    I have activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe   -"A"
    2.TO item to be confirmed immediately  - tick mark
    3.Propose confirmation   - tick mark
    Table T333 -AUTTA
    T333-SQUIT &
    T333-VQUIT is activated.
    I have activated in OMKX as below
    Table T321-TBFKZ Immediate TO Creation with "A"
    T321-TAFKZ TR creation with "X"
    After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
    Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
    Thanks & Regards
    Krishna
    Edited by: Hariharan krishna on May 25, 2011 8:01 AM

  • Confirmation for Limit PO

    Hi,
    While posting a confirmation for limit PO, if I tried to add items from a catalog then I I am getting the error "Incorrect transfer of limit data from calling application". Are there any specific OCI settings required for this?
    In the link https://websmp101.sap-ag.de/~sapidp/011000358700005436392003E.pdf ...I could see that there is a presentation for "Access to catalog via OCI during confirmation" at the top of page 4. But not sure where can I find that PPT in service.sap.com.
    Could you please help me in this?
    thanks,
    Arun

    Gil,
    We found that, only service items can be added to limit confirmation as in backend R/3 service POs will get created which will accomodate only service items.
    You need to create contract and catalog with service items. Then only it will get added to limit confirmation.
    Hope this would help you.
    Thanks,
    Arun

  • Error while posting confirmation for limit PO

    Hi Experts,
    we are having a standalone scenario(SRM 7) and the issue is as mentioned below
    The situation is that the PO is a limit order with 2 line items. The first line item is complete and has been closed off with the u201Cno further confirmation/invoiceu201D indicators selected. However the 2nd line still has some limit remaining but the when the central confirmations attempts to enter a good receipt against the line they get an error message which is "No Confirmation could be entered for purchase order"
    please guide me how to solve this.
    regards
    smita

    Hi,
    please find furhte information.
    a limit sc is created for a value of 37000 GBP and after approval it created a PO. but the user went and added a line item directly in PO for 40000 GBP. Now the total value of SC is 77000 GBP.
    user has created a confirmation for 36000GBP and selected no confirmation required further.there is no issues with this lin item
    but with the second line item he posted confimation for value 37000 gbp and invoiced for 30000 GBP.
    when i am trying to post confirmation for 3000 GBP system is throwing an error that "no confirmation could be entered for purchase order"
    could any one guide me how to solve this or any suggestions for solving this.
    regards
    smita

  • New field in Pricing field catalog for Item category

    Dear SD colleagues,
    We have scenario of maintaining pricing for Lower level BOM component.
    Like:
    Base price - 100/-
    When BOM explodes - 95/-.
    For this, I have taken ABAPer help and inseted a Z field for Item category in Pricing field catalog.
    Then, a new condition table is been generated using ZPSTYV and included in Access sequence. For Base price condition type, we have maintained record in combination with ZBOM-Item category for lower level BOM item.
    A new pricing routine is created in VOFM for Condition value and same is been assigned to Condition type as Alternative calculation type in pricin gprocedure contro data.
    Whe I create Sales order, value based on ZBOM is being pciked up by system.
    request you to please help in this regard.
    Thanks & regards,
    Praveen.

    Hi Marino,
    I have a requirement to determine the pricing based on "Discount Code", which is not a standard SAP field and i would like to have this as a custom field and linked to  customer in custom table.
    Question: When i add a new custom field and custom table for pricing, what are all the things i need to do in terms of ABAP.
    As per my knowledge, below are the steps...Please check and confirm my understanding is correct and let me know if i miss anything.
    1. Create a new field
    2. Create Custome Table
    3. Add field to Field Catlogue KOMG
    4. Add Field to KOMP (as this is item field)
    5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Sales Order
    5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Billing
    Thanks.

  • ERR-1002 Unable to find item ID for item "SESSION"

    Hi All,
    We have recently ugpraded from Aoex 3.1 to 3.2 and have now noticed on occasions that i get the following error when logging in...
    Unexpected error, unable to find item name at application or page level.
    ERR-1002 Unable to find item ID for item "SESSION" in application "2500".
    Return to application.I have been making changes to the application but have not changed anything to do with the SESSION item, i thought that was built into APEX so am not sure why it cannot find it.
    The error mainly happens if i clear the internet cache and try logging in again on a new session, i click Return to Application and try logging in again but get the error. If i login as a different user it logs in.
    Has this happened to anyone else?
    Thanks
    Graham

    Scott,
    Sorry, typing error, i meant 3.0 to 3.1.
    when a user clicks login the following happens...
    A Validation runs to determine if the username and pasword is right and if the user has parts to be accepted when logging in....
    DECLARE
      V_User_Check     VARCHAR2(800);
    BEGIN
        V_User_Check := M_USERS_VALIDATE_LOGIN(
           :P101_USERNAME, :P101_PASSWORD, :SESSION, :P101_BENCH, :P101_BENCH_ID);
        IF V_User_Check = 'PASSWORD_CHANGE' THEN
          :P101_PASSWORD_CHANGE := 'YES';
          RETURN 'You password must be changed for security purposes.  ' ||
                 'Please enter and retype a new password, then confirm the ' ||
                 'change by entering your existing password.';
        ELSIF V_User_Check = 'INVALID_USERNAME' THEN
          RETURN 'The username has not been recognised, please re-enter.';
        ELSIF V_User_Check = 'INVALID_PASSWORD' THEN
          RETURN 'The password entered is invalid, please re-enter.';
        ELSIF V_User_Check = 'ACCEPT_PARTS' THEN
          :P101_PARTS_TO_ACCEPT := 'YES';
          RETURN 'There are parts at this bench that need to be accepted/rejected for you to use, please check the quantities carefully.';
        ELSIF V_User_Check = 'OK' THEN
          RETURN '';
        ELSE
          RETURN V_User_Check;
        END IF;
    END;The following function is called from the Authentication Scheme (return authenticate_m_user;)
    CREATE OR REPLACE FUNCTION authenticate_m_user(p_username IN VARCHAR2, p_password IN VARCHAR2)RETURN BOOLEAN IS
      CURSOR m_cur( username_p VARCHAR,password_p VARCHAR) IS
        SELECT COUNT(*) user_count FROM m_users
        WHERE UPPER(username) = username_p
        AND PASSWORD = password_p AND in_use = 'Y';
      result_v                BOOLEAN := FALSE;
      V_Admin                 VARCHAR2(1) :=  'N';
    BEGIN
      FOR m_rec IN m_cur(p_username, dbms_obfuscation_toolkit.md5( input_string => p_password))
      LOOP
        IF m_rec.user_count = 1 THEN
          result_v    := TRUE;
        END IF;
      END LOOP;
      IF result_v = TRUE THEN
          UPDATE m_users
            SET logged_in = 'Y', last_login_date = sysdate
            WHERE upper(username) = upper(p_username);
          COMMIT;
      END IF;
      RETURN result_v;
    END authenticate_m_user;Also when i encounter the error if i keep clicking Login it keeps throwing the error, but if i turn on debug and then click login again it logs in ok.
    Hope this helps.
    Graham.

  • You should run a new contract selection for item 0000000010

    Hello Friends
    i am trying to create a service request from WEB IC by confirming Account and Ibase and able to create without error.
    if i end session and open the service request in change mode and if delete the ibase and save, then appeas the below message
    "You should run a new contract selection for item 0000000010", going through OSS notes, but found nothing.
    Transaction type ZXXX : we set
    Contract Determination is set to 'E' : Assign at Item leve : Assign immediately if unique for .
    if i open the service ticket in CRMD_ORDER and go in change mode if i click process action button next to error, this will disappear. but it comes when i assing a ibase to the request, so its working only when i first create without errors.
    users do not use crmd_order to process error and WEB CI does not have process action feature.
    any sort of help will be appreciated.
    Thanks
    Gopi

    Hi Gopi,
    Which release are you using ?
    This message appears when you change any field in the service ticket which has an influence on contract determination, such as ibase, ibase component, line item, ...
    As of CRM2007 we have enabled a hyperlink for this message. Clicking the hyperlink will re-execute the contract selection.
    Regards
    Gert

  • EDI Confirmation for Purchase Order

    Hi All,
    Scenario : Our vendor is located abroad. The Purchase order is transmitted to the vendor via EDI. The vendor sends a confirmation for the PO as an IDOC via EDI. The suitation we have is that there are instances where there is a miss match( Requested item doesn't match the confirmed item) between the item in the PO and the IDOC received from the vendor as confirmation. But the PO is still confirmed. Is there a method where we identify when there is a miss match in the item.
    Any input on the above would be appreciated.
    Thanks
    Nigel

    Hi Nigel,
    You could control this via customizing purchasing->Confimrations->Setup confirmation using SPRO.
    here ,you can specify the tolerance for price quantity and material.
    The tolerances you define apply to all vendors. Using the enhancement MM06E001 provided by SAP, you can specify that the tolerances do not apply to certain vendors.
    If the acknowledged quantities, prices, and dates vary from those set out in the PO or purchase agreement, the system issues a warning message. In this case, the purchasing document is not updated.
    Regards,
    Karuna

  • Confirmations for Limit Orders in ECS

    In extended classic scenario when creating a limit order, there is an error in process in the local PO related to the follow-on documents for goods receipt with the following error message:
    'Combination of GR/IR control not allowed for external services'
    It is only possible to create the order in the backend if the Invoice Only option is selected in the Limit Order, but then this means it is not possible to create a confirmation for Limit Orders!
    Has anyone else come across this problem in ECS for limit orders?  As far as I am aware the functionality should work with GR-based invoice verification.  In the backend PO it is possible to create the same order without any errors!

    Monica,
    My analysis till now is:
    1) It is true that limit oders are not going with "Confirmation & Invoice" flag. We need to raise OSS.
    (There is one additional problem with this is "The vendor master flags don't get transferred to PO" for this you will have to implement the OSS notes 956083.)
    Now after applying this notes you see the standard functionality:
    2) If we are creating PO with "Invoice Only" flag then there are follwoing options:
    a) If the "GR based invoice" flag in vendor master is checked then the POs goes into D item category and you can enter a service sheet for them.
    b) If the "GR based invoice" flag in vendor master is NOT checked then the POs goes into B item category and you can enter invoice just after PO.
    I made change in V_T163Y for B item category and checked the flag for GR but then too I am not able to enter GR for item category B.
    Please assign points for useful answer as applicable.

  • There are still batch split items with quantity X for item

    Our current system is ECC6. The deletion of item in the delivery (TO
    confirmed) is different before ECC6 (4.6C). In 4.6, unless quantity of
    batch split items are zeroed out in the delivery, the item cannot be
    deleted. Message "There are still batch split items with quantity X for
    item" is encountered. In ECC, line item can be deleted even batch split
    items are not 0. The message doesn't exist in ECC6.
    Please advise how to activate this message.

    In ECC6, the logic has been completely changed during item deletion.
    Now, there is no way to activate the message VL224 when deleting batch item.
    In 46c,
    FORM XLIPS_LOESCHEN_PRUEFEN is called with XL_ERROR = 'X'.
    Main program     SAPFV50P
    Source code of   FV50PFLP_XLIPS_LOESCHEN_RC
    FORM XLIPS_LOESCHEN_RC
               IF IF_TABIX IS INITIAL.
                 REFRESH LT_REASONS.
                 PERFORM XLIPS_LOESCHEN_PRUEFEN TABLES   LT_REASONS      <<<<<<
                                                USING    LF_POSNR
                                                         CHARX        <<<<<<<
                                                         IF_ALL
                                                CHANGING LF_EXIT.
    In ECC6,
    The FORM is called with XL_ERROR = SPACE. That's why the error is not issued.
    Actually, they are called from different place in ECC and 46c. The logic has  been completely changed.
    Main Program     SAPMV50A
    Source code of   MV50AF0D        
    FORM DELETE_ITEMS_CHECK                                      
               perform xlips_loeschen_pruefen(sapfv50p) tables   ct_reasons   <<<<<
                                                        using    ls_admin-posnr
                                                                 space
                                                                 space   <<<<
                                                                 'GHK' "n_766525
                                                        changing lf_exit.

  • Confirmation for Serialized Materials in SRM

    Hi,
    We have bunch of Serialized materials in SRM. Were able to create SC and PO 's/PR's were getting created.When I am trying to create Confirmation for Serialized Materials, its throwing me error and I dont see any field to enter the Serial Number.
    Am i missing anything on the config side or this is standard bug?
    If I am missing some steps to create confirmation for serialized items, pls od let me know.
    FYI, we are on SRM 5.5.
    Thanks,
    Satya.

    Awaiting some valuable inputs on this.
    Regards,
    Satya

Maybe you are looking for