Confirmed Quantity in Schdeule Lines is Zero for certain item categories

In make to order scenerios, the confirmed quantity in the schedule line is zero as a result credit management is not triggering. In some make to order scenerios, the confirmed quantity is showing up for certain materials even though there is no stock of the material in the Plant and credit management is getting triggered. While for some other make to order materials the confirmed quantities are showing as zero as there is no stock of the material in the plant and the credit management is not getting triggered. I want the credit management to be triggered irrespective of the availablity of the stock in the plant and the confirmed quantity in the schedule line should not be zero.
Look forward to the experts suggestions & solutions.

Hi,
Thanks for the reply.
Well all the standard credit management setting have been done including the setting advised by you. We are facing a problem in make to order scenerio for certain materials wherein we get a single schedule line with zero confirmed quantity. In this case the credit management does not get triggered even though the credit limit gets exceeded.
Requirement now is that even though the schedule line quantity is zero the credit management should get triggered once the credit limit gets exceeded and give the error STATIC CREDIT LIMIT EXCEEDED and should not save the sales order.
Thanks & Regards

Similar Messages

Zero confirmed quantity in schedule line

Hi all,
the confirmed qty in schedule line is zero in one of my sales order & system is giving the message that "no schedule lines due for delivery up to the selected date"
pls advice
vikas chhabra.

Hi Chabra,
System will show confirmed quantity as Zero in the sales order, if the customer has any credit check. If the customer exeeds credit limit, even though if you proceed then you can see confirmed quanitity as zero, in the sales order.
Goto VKM3, and give your sales order number, and release it then you can see the confirmed quantity in the sales order.
And in the delivery if your getting the error as "no schedule line due for delivery for the selected date" means, the confirmed quanity date in the schedule lines in the sales order is not same as the date what your giving while creating delivery.
Pl check the date in the order and give the same date at the delivery creation screen.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
Praveen

How to link Invoice Quantity and Confirmed quantity in schedule line

Hello,
I'm working for a report in BW. The user want to compare the invoice quantity to the confirmed quantity in schedule line for a sales order.
I can't find any table linking these two fields.
Could you help?
Thanks a lot
Jeannie

Ashish,
When we link these two tables by Sales Order Number / Item, we would take following result:
Sales Order    /     Itme     /     Schedule line     /    confirmed quantity   /     actual billed quantity
1                  /      10        /      1                     /    3                            /              5
1                /         10      /       2                    /     2                            /             5
But in fact, for Sales order/itm 1/10, we have only 5 PC billed, not 10.
When billed 5 PC, I want to despatch it to the Schedule line as 3, 2.
Regards,
Jeannie

How to remove leading zeros for an item number within quickviewer

how to remove leading zeros for an item number within quickviewer. Pls help

ask your abap guy to do it. not portal guys business.

A quick way to set different color for certain items in JList?

is there a quick way of setting different color for certain items in JList?

Either use HTML strings as the values in your JList (quickest, but may not be the most convenient, especially if your model isn't just text), or create your own ListCellRenderer (e.g. extend DefaultListCellRenderer).
There is no such thing as "list.setItemForeground(int index, Color c)". You'll have to use one of the methods above.

Committed and confirmed quantity in shedule line

Hi,
I have an order in which material was not confirmed on a day when that material was present.
I noticed that the commited quantity was 1 but confirmed qtty was 0 on the shedule line of that day. Later the order confirmed on a later date with both confimed qtty & committed qtty as 1.
Questions
1)Why did the material did not confirm on that day?
2)What is the difference between confirmed and committed qtty?
Regards,

This is Standard SAP.
1)Why did the material did not confirm on that day?
Material was not confirmed for possible reason being:
a. Material not in Stock
b. Material in Stock, but based on number of Lead Days, it is confirming future date.
2)What is the difference between confirmed and committed qtty?
Confirmed Quantity is confirmed on to be available for delivery on a particular Date and particular Quantity.
Commited Quantity is the Commited Quantity in sales Order.
Regards,
Rajesh Banka

Confirmed quantity on sch. line erased when credit block

Hi Gurus,
I hope you can help me. I am creating a sales order on VA01, but when trying to save, it appears the incompleteness log, saying the PR position is missing.
What happen is that due to the credit block, the confirmed quantity on the schedule line has been erased.
I want to keep the credit block and do not erase the confirmed quantity. How can I do it?
Thanks in advance.

The problem was solved changing the incompleteness log for that document class.

Ungrey Confirm Quantity under Schedule Line

Hi SD Experts,
Inside sales order when ordered quantity lets say 10 units, under line item schedule line in confirm quantity column is grey out. Is there a way to configure so that user can change the confirm quantity?
Currently confirm quantity follows the ordered quantity. In some cases user wants to change the confirm quantity to differ from ordered quantity for reporting purposes to show quantity fulfilled and quantity unfulfilled.
Please advise. Thanks!
Regards,
LEE

Hi Lee
But as your requirement is to change the Schedule line item qty feild in modified mode then using transaction SHD0 you can do it .
But In item data->schedule line data only , you can see ordered qty , but the confirmed qty will be calculated based on the availability check only.Because say if there are more than X no. of orders then the Schedule line date will be calculated and it gives the confirmed qty and the schedule line date also
Example :
order qty - 100pcs
confirmed qty - 75pcs    Delivery date - 15/01/2009
confirmed qty - 25pcs    Delivery date - 17/01/2009 (Assuming that you have maintained 2 days in MMR)
NOTE   : But it is not advisable to change that feild
Regards
Srinath

Wrong Confirmed quantity in Schedule lines

Hi Friends,
I am creating sales order fo scheuling aggreemnt uinsg function module SD_SALESDOCUMENT_CREATE
from online.
I ma getting wrong confimation date and wrong confirmation quanatity in scheules line whne I use the above function module.
I am getting diffreent confirmation dates and confirmation qty n whne I use VA01 and function module SD_SALESDOCUMENT_CREATE.
Not sure what are the paramters I am missing .
Please let me know If any one of you has encountered this kind of issue .
Thanks,
Siva.

Hi,
Just turning off the availability check in material master, doesnt stop the sequence of the requested delivery date.
Just go through this info.
Checking Rule
You use the checking rule to control the scope of the availability check for each transaction in sales and distribution. You also specify whether the check should be carried out including or excluding replenishment lead time. The individual checking rules define by transaction, which stock and inward and outward movement of goods should be taken into account for the availability check.
Schedule line category
You can control with the schedule line category whether an availability check and transfer of requirements should be carried out in the sales documents. The possible settings for this at schedule line level are dependent on the settings in the requirements class which is determined from the requirements type of the material.

Not able to confirm quantity in Schedule Line

Hi all
I created order for 1000 quantity, stock available was 1000, confirmed quantity 1000. Now when i deleted this order and trying to enter fresh order for 1000 units i am not able to confirm the quantity as it is showing confirmed against the deleted order. please guide me how to go about.
regards
Rajesh T

Dear Rajesh
Check in document flow VA02 by entering the deleted sale order number.
If delivery is created and saved without doing PGI, then you wont be able to assign the stock to another order. Delete the delivery document also and retry.
Thanks
G. Lakshmipathi

Ability to modify Account Assignment Category for Service Item Categories

Dear experts,
Our customer has a requirement to modify the account assignment category when the item category is set to "D" services on a PR and PO line item. This scenario is specific to indirect procurement scenarios in SAP ECC 6.0 MM.
End users may potentially create a PR against a service item category with an incorrect account assignment category. These PRs are created using free form text. No service master exists in these scenarios. During the approval process or during PO creation, an approver or the buyer may need to correct the account assignment category. The account assignment category is "display" only and cannot be modified when the item category is set to "D". The user must delete the line item and create a new line item with the correct account assignment category. The copy function cannot be used because the account assignment copies from the existing line and cannot be modified.
Any recommendations to this issue using standard SAP configuration solutions?
Thanks,
Jennifer

Item Category to Account Assignment Category combination is already configured. For Service Item Category, we have three account assignment categories configured. All three categories are valid in different scenarios. Sometimes the user selects the incorrect account assignment category (out of the three available) depending on the business scenario. PT9F configuration is already set to Account Assignment category "optional". However, the account assignment category still cannot be modified on the PR when the item category is "D" service.
Any other recommendations?

Making condition type unmandatory for free item categories

Hi all,
I've created a form routine in RV64ANNN the requirement is when we create or change sales order....we have few item categories were in we need to make a concern condition type unmandtory if items with those item category is created...else if make the condition type mandatory.........example...............this is done for only one pricing procedure......in V/08 tcode and there i've assinged our routine number for that condition type which needs to be changed dynamically.
say we have Sales doc type ZXXX for this sales doc type lets say we have item category ZITE1 and ZITE2.......and lets say the Condition type is ZCOND(whether the condition type is required or not is done by checking in tcode V/08 and this is always checked).now when the user enters creates a item 1 with item category ZITE1 and leaves the amount field blank it will however ask to enter the amount.......now here is the problem............if user creates second line item with item category ZITE2 its againing asking to enter the amount for that condition type.............this is happing even after i've desinged the below code.............
DATA: l_kobli TYPE kobli.
IF komk-kalsm = 'ZINFAM'.
*Sale Doc ZORA
IF komk-auart = 'ZORA'.
IF komp-pstyv = 'ZTAN'.
l_kobli = 'X'.
ELSEIF komp-pstyv = 'ZZNN' OR
komp-pstyv = 'REN'.
l_kobli = ' '.
ENDIF.
*Sale Doc ZORB
ELSEIF komk-auart = 'ZORB'.
IF komp-pstyv = 'TAN'.
l_kobli = 'X'.
ELSEIF komp-pstyv = 'REN' OR
komp-pstyv = 'TANN'.
l_kobli = ' '.
ENDIF.
*Sale Doc ZRE
ELSEIF komk-auart = 'ZRE'.
IF komp-pstyv = 'REN' OR
komp-pstyv = 'RENN'.
l_kobli = ' '.
ENDIF.
*Sales Doc ZCOR
ELSEIF komk-auart = 'ZCOR'.
IF komp-pstyv = 'KRN' OR
komp-pstyv = 'RENN'.
l_kobli = ' '.
ENDIF.
*Sales Doc ZCI
ELSEIF komk-auart = 'ZCI'.
IF komp-pstyv = 'KEN'
l_kobli = 'X'.
ELSEIF komp-pstyv = 'TANN'.
l_kobli = ' '.
ENDIF.
ENDIF. "Sales Doc Check
READ TABLE xt683s WITH KEY kvewe = 'A'
kappl = 'V'
kalsm = 'ZINFAM'
kschl = 'ZPOR'.
IF sy-subrc = 0 .
xt683s-kobli = l_kobli.
MODIFY xt683s INDEX sy-tabix.
UPDATE t683s SET kobli = l_kobli WHERE
kvewe = 'A' AND
kappl = 'V' AND
kalsm = 'ZINFAM' AND
kschl = 'ZPOR'.
ENDIF.
ENDIF. "Pricing Procedure check
CLEAR: l_kobli.
The table which has this mandatory checked is T683S and the field is KOBLI........i've debugged it the routine come up well with item category ZITE1 and the table gets updated with KOBLI = 'X' but when i navigate the screen in VA02 or in VA01 to second item created with item category ZITE2...the table logic does'nt goes and updates the above table............Suggest me with some solution........
Thanks in Advance.....

I've resolved it by myself

CRM Availability Check not working for certain Item Category

Hi there,
I have a situation where for certain order type/item category combinations, the availability check on the same material is not working.
The check is set up to happen in SAP ECC.
I have checked the config. under SPRO->CRM->Basic Functions->Availability Check->Availability Check using SAP ECC
as per many SDN posts on this, and everything looks fine.
The new item category, which was a copy of an existing one, works (i.e. gives availability) for certain order types, but not others.
If I create the same order directly in ECC, it works correctly every time.
I searched the code (from consultants who set it up originally) and can see nothing specific to the order type/ item category.
I also put a breakpoint on AVAILABILTY_CHECK function module in SAP ECC - it is not being hit, in the case where check is not successful.
Breakpoints in MV45AFZZ (Sales Order userexit) also not being hit, but they are hit for the Order/item category combination when it works successfully.
Any suggestions on where else this could be configured would be appreciated!
thanks,
David

Hi David,
One 'simple' reason for this could be that the copied item category does not have the
ATP Profile set up in the item category in the IMG. Make sure you have an ATP profile assigned in the area 'ATP Profile' in the item category.
Please see as well the SCN Wiki link:
Availability Check CRM-BTX-BF-ATP - CRM - SCN Wiki
Best regards
Christophe

Clear Cache for Certain Items on Tab Click

I found this in the forms:
If you want to clear the cache of the page submitted when the tab is clicked, that should be the job of that page. You can create an after-submit process (before computations and validations) with:
apex_application.clear_page_cache(:APP_PAGE_ID);
However, I need to clear certain items not everything on the page. I tried substituting apex_application.clear_item_cache(:APP_ITEM); but that doesn't work. What is the process that clears the apex_application item cache?

Is the page you're clicking away from executing a submit when you click away? If so, I would try either of these in a page branch.
Assume you are on page 1 and clicking to page 2. On Page 2, let's say you want to keep the cache on items P2_A, P2_B but clear the cache for P2_C.
In your page branch (defined on page 1) that fires to take you to page 2, try either of these:
Clear cache on page: 2
Set these items: P2_A, P2_B
With these values: &P2_A., &P2_B.
That should clear all of 2 but reset A and B back to their current values from the cache before it's cleared.
Or, try this:
Clear cache on page: (don't put anything here)
Set these items: P2_C
With these values: (don't put anything here)
That should (I think) only clear P2_C

Is there a bapi for confirming quantity on schedule line?

Does anyone know of a BAPI for confirming the quantity on a sales order schedule line?
Thank you,
Justin

I was not able to get either of these to do what I needed, so I just wrote a BDC subroutine to confirm the quantity.
Thanks for your input!

Confirmed Quantity in Schdeule Lines is Zero for certain item categories

Similar Messages

Maybe you are looking for