Conflict between File Name and Directory name

How can I create a new real File (ie abc.xxx) into a directory where already exits a Directory with same name I want to give to the new file ?
Thanks
starting directory = woDir
existing directory in woDir = abc.xxx
new file to be created in woDir = abc.xxx

in FAT each directory entry must have a unique (case-insensitive) name. Whether it's a file or a directory is just determined by a bit flag assigned to it..

Similar Messages

Dynamic File Name and Directory File Sender Adapter

Hello gurus,
I have a question: Is there any way to make the File Name, and Directory Dynamic of a File Sender Communication Channel ?
For example, taking it as a parameter from a Web Service Request.. (I mean, the only way with this would be a ccBPM). I don't exactly know if there is a way, I just thought about this.
Please tell me if someone could make Dynamic these 2 parameters while picking a file.
Regards,
Juan

oops,thought i was replying to the PgP question:)
I think you should be able to achieve this via adapter module but i m not really sure how exactly it will be done .
Thanks
Aamir
Edited by: Aamir Suhail on Jul 28, 2009 1:42 PM

File and directory names with Danish characters

I have installed the Novell Client v2.0 for Linux on my Open Suse 10.3. The Client is connecting to my Netware servers (6.0 & 6.5) without any problems...
There is one problem... Filenames and directory names with the Danish , & (ae, oe & aa), e.g the filename bger.doc (bger = books) is shown as b. and when clicking the file the file disappears from the file list. It seems to be the same problem with the German (umlaub).
What to do?
/Michael

Originally Posted by J.H.M. Dassen (Ray)
mimo <[email protected]> wrote:
> There is one problem... Filenames and directory names with the Danish ,
> & (ae, oe & aa), e.g the filename bger.doc (bger = books) is shown as
> b. and when clicking the file the file disappears from the file list. It
> seems to be the same problem with the German (umlaub). What to do?
As far as I know, the Novell Client for Linux expects that file and
directory names use the UTF-8 encoding and does not support a traditional
8-bit encoding like ISO 8859-1. Try changing the encoding of file and
directory names to UTF-8 as described in
SDB:Converting Files or File Names to UTF-8 Encoding - openSUSE
HTH,
Ray Dassen
Technical Support Engineer, EMEA Services Center, Novell Technical Services
Novell, Inc. Software for the Open Enterprise Software for the Open Enterprise
Seems a good hint. When I create a folder or file from within SUSE using an "Umlaut" everything is OK and NCL 2.0 displays them correctly as they are UTF-8 formatted.
The proposed tool is no solution: one cannot convert folders or files that one cannot see (does it work for folders at all?). Maybe a windows tool would work because one could search for all files or folders with "Umlaute" and convert them. Other options?

Why java file name and class name are equal

could u explain why java file name and class name are equal in java

The relevant section of the JLS (?7.6):
When packages are stored in a file system (?7.2.1), the host system may choose to enforce the restriction that it is a compile-time error if a type is not found in a file under a name composed of the type name plus an extension (such as .java or .jav) if either of the following is true:
* The type is referred to by code in other compilation units of the package in which the type is declared.
* The type is declared public (and therefore is potentially accessible from code in other packages).
This restriction implies that there must be at most one such type per compilation unit. This restriction makes it easy for a compiler for the Java programming language or an implementation of the Java virtual machine to find a named class within a package; for example, the source code for a public type wet.sprocket.Toad would be found in a file Toad.java in the directory wet/sprocket, and the corresponding object code would be found in the file Toad.class in the same directory.
When packages are stored in a database (?7.2.2), the host system must not impose such restrictions. In practice, many programmers choose to put each class or interface type in its own compilation unit, whether or not it is public or is referred to by code in other compilation units.

Specify the output file path and print name when printing pages

hi,
how can i Specify the output pdf file path and print name when i am using the function PrintPagesSilent from AcroAVDoc Object.
My Code :-
Acrobat.AcroAVDoc doc = new Acrobat.AcroAVDoc();doc.Open(path,
"temp");

Dear Irosenth,
i try with different format (doc, docx, xls, jpg, bmp and txt) and it working successfully, but it give an random name for the file which saved in default folder for Adobe PDF print.
you can use the following function:
private void PrintPDF(string[] inputfilepath){
foreach (string path in inputfilepath){
Acrobat.
AcroAVDoc doc = new Acrobat.AcroAVDoc();doc.Open(path,
"temp");
Boolean v = doc.PrintPagesSilent(0, ((Acrobat.AcroPDDoc)(doc.GetPDDoc())).GetNumPages() - 1, 0, 0, 1);doc.Close(1);
and calling it by the following code:
PrintPDF(System.IO.Directory.GetFiles("c:\\t\\printjob"));
copy all files that you want to convert in side the mentioned path and run it program, then check the defualt print path for Adobe PDF printer.
test it and reply me. thanks again

How to get the column name and table name from xml file

I have one XML file, I generated xsd file from that xml file but the problem is i dont know table name and column name. So my question is how can I retrieve the data from that xml file?

Here's an example using binary XML storage (instead of Object-Relational storage as described in the article).
begin
dbms_xmlschema.registerSchema(
    schemaURL       => 'my_schema.xsd'
, schemaDoc       => xmltype(bfilename('TEST_DIR','my_schema.xsd'), nls_charset_id('AL32UTF8'))
, local           => true
, genTypes        => false
, genTables       => true
, enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_CONTENTS
, options         => dbms_xmlschema.REGISTER_BINARYXML
end;
genTables => true : means that a default schema-based XMLType table will be created during registration.
enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_CONTENTS : indicates that a repository resource conforming to the schema will be automatically stored in the default table.
If the schema is not annotated, the name of the default table is system-generated but derived from the root element name :
SQL> select table_name
2 from user_xml_tables
3 where xmlschema = 'my_schema.xsd'
4 and element_name = 'employee';
TABLE_NAME
employee1121_TAB
(warning : the name is case-sensitive)
To annotate the schema and control the naming, modify the content to :
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb">
<xs:element name="employee" xdb:defaultTable="EMPLOYEE_XML">
    <xs:complexType>
Next step : create a resource, or just directly insert an XML document into the table.
Example of creating a resource :
declare
res boolean;
doc xmltype := xmltype(
'<employee>
<details>
    <emp_id>1</emp_id>
    <emp_name>SMITH</emp_name>
    <emp_age>40</emp_age>
    <emp_dept>10</emp_dept>
</details>
</employee>'
begin
res := dbms_xdb.CreateResource(
           abspath   => '/public/test.xml'
         , data      => doc
         , schemaurl => 'my_schema.xsd'
         , elem      => 'employee'
end;
The resource has to be schema-based so that the default storage mechanism is triggered.
It could also be achieved if the document possesses an xsi:noNamespaceSchemaLocation attribute :
SQL> declare
2
3    res boolean;
4    doc xmltype := xmltype(
5 '<employee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
6             xsi:noNamespaceSchemaLocation="my_schema.xsd">
7    <details>
8      <emp_id>1</emp_id>
9      <emp_name>SMITH</emp_name>
10      <emp_age>40</emp_age>
11      <emp_dept>10</emp_dept>
12    </details>
13   </employee>'
14   );
15
16 begin
17    res := dbms_xdb.CreateResource(
18             abspath   => '/public/test.xml'
19           , data      => doc
20           );
21 end;
22 /
PL/SQL procedure successfully completed
SQL> set long 5000
SQL> select * from "employee1121_TAB";
SYS_NC_ROWINFO$
<employee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceS
<details>
    <emp_id>1</emp_id>
    <emp_name>SMITH</emp_name>
    <emp_age>40</emp_age>
    <emp_dept>10</emp_dept>
</details>
</employee>
Then use XMLTABLE to shred the XML into relational format :
SQL> select x.*
2 from "employee1121_TAB" t
3     , xmltable('/employee/details'
4         passing t.object_value
5         columns emp_id   integer      path 'emp_id'
6               , emp_name varchar2(30) path 'emp_name'
7       ) x
8 ;
                                 EMP_ID EMP_NAME
                                      1 SMITH

What's the difference between "Full Name" and "Account Name"

Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

Your computer name by default would be "John David Appleseed's Macbook Pro"
But you can always change that in System Preferences->Sharing
And yes, the first account you set up will be an administrator.

Differnce between business name and physical name

What is the differnce between business name and physical name in OWB

Hi Vibhuti,
What I have noticed is that Physical name is THE important thing that is required while importing and synchronising. It has a length limitation of 30. The mappings appear with this name in the left panel in design center. The Business name is just for reference I believe.
Cheers,
Swagata

Difference between .Incumbent Employees name and Employees name

Hello HCMers,
What is the difference between the data coming from the following fields:
1.Incumbent Employees surname p0000-STAT2 & Employee surname PA0001-SNAME
2.Incumbent Employees name p0002-VORNA & Employee Name PA0001-SNAME
Can somebody enlighten me?

Stalin,
PA0000-STAT2 is for Employement status
PA0002-VORNA and NACHN are for FIrst name and last name
PA0001-ENAME is combination of VORNA and NACHN
please go to SE12 put the table name and check the fields and description.
cheers
Ajay

SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user

Hi!
Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
10/7/2012 2.497
11/7/2012 2.723
12/7/2012 2.722
13/7/2012 2.699
16/7/2012 5.055
17/7/2012 4.963
18/7/2012 4.954
19/7/2012 4.998
20/7/2012 4.965
23/7/2012 5.117
24/7/2012 5.012
25/7/2012 5.071
As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
The number of page views remained constant.
So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
from yesterday (July, 25th) Top Visitors report:
#    Visitor                  Page Views   %
1   Cinthia XXXXXXXXXX    359      0,55%
5   Giselle XXXXXXXXXX     143        0,22%
7    Aline XXXXXXXXXX       138        0,21%
15 nt\cmazevedo              111        0,17%
60 nt\gbsantana                 69        0,11%
73 nt\aglsiqueira                 65      0,10%
"Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
About the environment:
We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
Does anyone have any tip about what is going on?
Thanks in advance!

Hi, Manas!
First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
I have four web servers on my farm named from P01 to P04. Then I created this test script:
Step 1: Change local HOSTS file to point the web application on the server P01.
Step 2: Access site "A"
Step 3: Access site "B"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P02.
Step 2: Access site "C"
Step 3: Access site "D"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P03.
Step 2: Access site "E"
Step 3: Access site "F"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P04.
Step 2: Access site "G"
Step 3: Access site "H"
Step 4: Close the browser.
I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
XXXXXXXXXX".
With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
Thanks!

Class name and package name clashing

When i have a class and a package with the same name, I cannot access classes in the package. For example I have 3 classes and 1 package as below
- Test.java
- PackageName.java
+ PackageName // this is a directory
- MyClass.java
Below are the codes of .java files
Test.java
=======
public class Test { PackageName.MyClass a = new PackageName.MyClass ();}
PackageName.java
===============
public class PackageName{ }
MyClass.java
==========
package PackageName; public class MyClass { }
I can compile PackageName.java and MyClass.java but not Test.java. It says
cannot resolve symbol
symbol : class MyClass
location: class PackageName
PackageName.MyClass a = new PackageName.MyClass ();
But if I remove the PackageName.java, I can compile Test.java perfectly. I think when I use PackageName.MyClass, java thinks that I try to access an inner class MyClass of PackageName class, and that does not exists. Is there any way to solve this ambiguation, other than making the package name and class name different? Thank you very much.

This works fine: just add an import to Test.java.
import PackageName.MyClass;
public class Test
    public static void main(String [] args)
        MyClass a = new MyClass();
public class PackageName {}
package PackageName;
public class MyClass {}It's a pretty wacky, useless example, but it works.
Plus I thought inner classes would have a dollar sign in their .class file names. When I compile this:
public class OuterClass
    public static void main(String [] args)
        OuterClass outer = new OuterClass();
        System.out.println(outer);
    public String toString() { return "I'm an OuterClass"; }
    class InnerClass
        public String toString() { return "I'm an InnerClass"; }
}I see two .class files: OuterClass.class and OuterClass$InnerClass.class
Why make up examples like this? It's hard enough writing code, and it's easy to disambiguate for the compiler.

How to get the class name and field name dynamically

Hi
I have a class (ex: Contract) the fields (ex : a,b,c) .i need to get the class name and field name dynamically
ex
if( validation file for the field Contract.a){
return contract.a;
}else if(validation file for the field Contract.b){
return contract.b;
how to pass the field name and object dynamically
Please help me .............
Thanks in Advance..
Edited by: 849614 on Aug 11, 2011 6:49 AM

YoungWinston wrote:
maheshguruswamy wrote:
Agreed, but IMO, i still feel its best if there is no tie in between consumer class level details and the database it talks to. A service layer is needed in between them.Sounds like you've done a bit of this before. Me, I've either been a modeller/DBA, doling out data, or a nuts and bolts programmer (and actually more toolmaker than apps, but did a bit of that too).
Do you know of a good book about the "middle ground" (ie, these service layers)? I understand it empirically, but haven't had a lot of exposure to it.
Winston
Edited by: YoungWinston on Aug 11, 2011 10:34 PM
PS: Apologies. Edited my previous post, presumably while you were composing your reply, when I finally realized what '.filed' meant.Most of my work is in web development, never been a DBA :) . The biggest 'concern' in my shop is 'separation of concerns'. The UI group reports up to a different IT head, the DB group reports up to a different IT head and so on. The looser the coupling between these systems, the lesser the project costs (Integration, QA etc) are. Martin Fowler's books contain good information about separation of concerns in an enterprise environment. The two books which i recommend are
[url http://www.amazon.com/Patterns-Enterprise-Application-Architecture-Martin/dp/0321127420]Enterprise Application Architecture and
[url http://www.amazon.com/Enterprise-Integration-Patterns-Designing-Deploying/dp/0321200683/ref=pd_sim_b_1]Enterprise Integration Patterns

Can WS name and Binding name be changed?

Hi,
When we generating the wsdl file from a sender agreement, A webservice name and Binding name have been created in the wsdl file.
web service name AS "XI_20ec1074cc28367c964b34f226098f29_Service"
and binding name as "ServiceInterfacenameBinding"
But the legacy people who are going to access this webservice need this names to be changed. is it possible from PI??
i mean like instead of "XI_20ec1074cc28367c964b34f226098f29_Service" they want some name like "getProductinformation"
and binding name like as "ProductinformationBinding"
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Sep 1, 2010 8:32 AM

Hi Balaji,
It s not possible within PI, as this Information is generated when you retrieve the WSDL from the Directory.
However if you want to change that you can do it manally before forwarding the WSDL to other people.
The name of Binding/Service has no impact on the call at runtime.
Best regards
Sebastian

Diff between file potr and trfc port

hi all
what is the differance between file port and trfc port

Port is the name of the channel by which the SAP system exchanges electronic data with an external system.
In general, You conect a USB to the system thru a USB port and the system recognises the USB thru the port.
Similar is in the case of SAP also.
In SAP you often have to send data between SAP - SAP/ Non -SAP systems. this transfer of data between systems is done thru ports.
The types of ports available in SAP are,
TRFC port,
ABAP port,
Fike Port,
XML port,
HTML port.
There are various technical methods for implementing this type of communication (port types). The selection of the port type depends on the technical configuration of the external system.
For example, most EDI subsystems read IDocs in the form of sequential files - that is, the port type "file" is used.
TRFC is a type of port used when the data being exchanged is Transactional data.
Data can be transferred between two SAP systems reliably and safely via transactional RFC (tRFC).
The TRFC was renamed from Asynchronous RFC to Transactional RFC, because asynchronous RFC has another meaning in SAP systems.
The remote system need not be available at the time when the RFC client program is executing a tRFC. In SAP systems, the tRFC component stores the called RFC function together with the corresponding data in the database, including a unique transaction identifier (TID). This ensures that the called function module executed exactly once in the RFC server system.
TRFC port is used when we are sending the data which has to be sent quickly, in small packets and when it doesnot need to wait for the reply.
Also, when we have to send standard data ie., standard Idoc etc, we do it using TRFC port, it doesnot allow to do additions to the data being sent. for that we need to use ABAP port.
You can goto the tcode we21 and check out the various ports available.

How can i traverse between files in a directory

how can i traverse between files in a directory. I ahve seen in the site that isFile can be used to switch from one file to other but i didn't found such method. I am working in Eclipse. I would be thankful if u send me the solution.I mean the way to traverse

listFiles() returns all the files in a directory. You can check if it is a file and read it. Read the API docs.
If you have specific problem with your code, post the code and the problem description.

Conflict between File Name and Directory name

Similar Messages

Maybe you are looking for