Conflict in file name : platform.xml

Using AIR 14 I can't compile an ipa anymore. Always getting a "Conflict in file name : platform.xml" error. Any hint?

i am Getting Auth Fail error in trace logs when creating Policy for SFTP File Download and Saving it.
Problem Description
Getting Auth Fail error in trace logs when creating Policy for SFTP File Download and Saving it on server.
Steps to Reproduce
1. Create a policy with Add HTTP Header and FileDownload filter with SFTP server details (need to specify fingerprint)
2.Add Save to File filter with correct path and file name.
3.Add scheduler that runs after every 20 sec
4.Verify file at Save location and check trace logs.

Similar Messages

Random file name for xml output

Hi:
You know how when you're in design mode and select PDF preview, then click an email submit XML data button it assigns a random number as the XML file name? How can I set that same thing up when a user clicks the submit button from the web site? The default it assigns is the name of the pdf form.
Many thanks for any suggestions,
Ginger

Virginia,
The email submit button can only do what you described in your message.
- The random file name generated in PDF preview is because you are in the design mode (not everyone has the working xpd file saved when he/she does a PDF preview. This results in a random file _x3432gd4343.xml is generated. It could have been called untitle1.xml if the product developers decide to do so).
- When you open a PDF file (which has a name) in acrobat, the PDF filename is being used for the email attachment.
Jimmy
[email protected]

Unique file name - 6dk1632m3a06f9lh.xml

If I
Submit by Email from within Designer 8 - from the Preview Tab - the programme generates a unique file name, i.e. 6dk1632m3a06f9lh.xml(or XDP) yet when I
Submit by Email directly from Reader it gives the xml file name the same name as the host PDF i.e. ThePDFFormName.xml. Now I would like to use the former because when I receive back the XML files, I'd prefer to save them locally and not have to rename or save them into a differing locations. Then at the end of the day I can batch them ready for a spreadsheet.

To add to John's Question:
Is there any way to programmatically set the file name to assume the name of one of the fields in the form?
(I have worked out how to put a field name into the Subject line and body copy of the email)
Zoe

File name of xml form

I have created a new xml form.
For the name, I have used a label with property "displayname".
When I save the form, in the KM I can view the file with the name that I assigned, but if I go with the mouse over the file I see in the button bar that the original name is another.
There is one methods to change this name ? or save the file with a fixed name ?

Hi Loris,
its not possible to save the XMLFormsItem with a fixed name. Every time you are creating a new item, there is a unique id generated which is used as "real" item name.
This mechanism avoids conflicts with other items stored in that folder.
Regards
--Matthias

Conflict between File Name and Directory name

How can I create a new real File (ie abc.xxx) into a directory where already exits a Directory with same name I want to give to the new file ?
Thanks
starting directory = woDir
existing directory in woDir = abc.xxx
new file to be created in woDir = abc.xxx

in FAT each directory entry must have a unique (case-insensitive) name. Whether it's a file or a directory is just determined by a bit flag assigned to it..

How to get the file name in one of the Xml node field?

Hi Experts,
i have one requirement with file name in xml file.
i need to get <b>the file name of file</b> in one of the node in xml content of that file.
how can i achieve that req?
treat this as Very Urgent.

Hi Bheem,
Explain your scenario in detail..
>>i need to get the file name of file in one of the node in xml content of that file.
1. Create an node <b>Filename</b> in the target datatype.
2. Check the Option Filename in the Adapter Specific Message Attributes in the sender file CC.
3. Use the following UDF and map it to the Filename field in the target message type.
public String getFileName(Container container)
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Regards
San

Need Target File Name Timestamp is same as Source File name Timestamp

Hi ,
I want to genereate Target file name (Target_09062008082030.xml) but this time stamp is exactly Sorce FileTime stamp..(Source_09062008082030.xml)..
so, i want to create a target file with the same source file time stamp..
for this.. i sed Message Specific attributes... in both sender and receiver side.. but that was creating with the complete name.of source file name.. but i want only Timestamp of the source filename... and remaing is the constant.. for this how can i proceed ..
Thanks
Jain

See in Sender CC when you set the Adapter Specific Message Attr for file name it will send the filename in the header of the XI Message.
To acces this file name inside mapping you need to create a UDF . The type can be any thing as you desire.
You dont need to pass any variable .if suppose you want the file name (constant) e.g ABC_<timestamp>.xml
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String fileName= conf.get(key);
//see above your key is FileName which will be sent by the sender CC automatically... You are simply accessing it here using get() method.
//now ur filename will contain name of the source file... you need to perform a substring operation to get the timestamp and create a new file name as you desire.
fileName = "New_<timestmp>.xml"; //for e.g
//set this file name again in header message using put()
conf.put(key, fileName);
//when you check on the adapter specific message attr for fileName in the receiver CC ,it will automatically take this new file name value.
return fileName;
// if you want to use this new fileName inside your mapping payload (for other fields) you can assign this to any target field,else just assign it to the root tag which will make no difference if this file name is not used anywhere.

Skipping the content conversion if the input file is an xml file.

Hi,
My source folder contains both text files and xml files.
I want to skip the content conversion if the input file is an xml file and the same Content conversion as to work if the input file is a text file.
Is there any way to achieve this?
Regards
Divia

Hi,
I think u hv to create 2 separate Communication Channels.............. 1 for XML (without Content Conversion), & other for TXT with Content Conversion.
In 1st CC give file name as *.xml & in 2nd give file name as *.txt
Thanks,
Maheshwari

How to create Same File Name in Recever side

Hi Frnds,
1)In my sender side i am having one XML file Name: vendor123.xml
i have to send this file to receiver side with same file name, what are setting i need to do in file adapter.
In receiver side i dont have any file, i have to crete with same file name.
2)
In my scenario my message interface name Vendor123_mt.
In receiver side my file name should be Vendor123_mt, How to do handle this situation.
Regards,
Raja Sekhar

Hi Raja,
Regarding you 1st question: It can be easily achieved using the Adapter specific Message Attributes. You can refer the Michal's blog for it.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regarding your 2nd question:
Here you will need to use Variable Substitution. Use the following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
Hope it helps.
Regards,
Sanjeev.

Duplicate file names within iphoto

Hi
I have replaced my camera (my one year old son threw it in the bath!!!) and since the swap over i didnt think that there would be conflict in file names. It was either this or the crashing of my hard drive( i did have a back up of all my photos) and when i reimported them onto my computer strange things happened. In spotlight i can find up to 10 different pictures with the same name and then _1 or _2 etc added to the end. Curiously all these photos are dated the 14 jan 04 which has no relevance to the date the hard drive crashed - it crashed around the end of last year. I had backed up onto a pc server - not sure if that contributed to the file name mix up or loss of date. All the creation dates are gone but the modified date is 14/1/04.
Now what happens is if a scroll through iphoto i can see pictures and then they change before my eyes. Also if i click on a photo another one is brought up usually the oldest photo.
Is there a quick fix or do i need to remove all my photos and delete the library and start again?
Hopefully someone can help
Thanks
Brendan

Hello,
This is a by-product of the MathScript implementation. Basically, there are two matrix datatypes being used under the hood. We are working to eliminate this issue, but you can safely ignore the warnings. You will need to bring both folders along with your built application.
Grant M.
Staff Software Engineer | LabVIEW Math & Signal Processing | National Instruments

Creating the receiver file name dynamically

Hi Friends
Here I have a scenario IDOC to File, I am not using any mapping or creating any repository objects. My requirement is to pass the sender IDOC to receiver in an xml file format. While posting the file at receiver file directory I suppose to post it with a file name File_IDOCnumber#.xml i.e., i need to include idocnumber in the file name. As I am not using any mapping objects I might not be able to use Dynamic configuration option, kindly suggest me with a solution.
Am using PI7.1 version
Regards
Suman.

Hi Suman,
Depending on your backend application, you can create a XML file port in WE21 and use that in your Partner Profile configuration. You can create your own function module to generate the filename based on your requirements.
Alternatively, if you really want to pass through PI, you can use variable substitution in your Receiver File Adapter:
Under File Access Parameters in Target Tab:
File Name Scheme: File_IdocNumber_%idoc%.xml
Under Variable Substituion in Advanced Tab:
Enable : Yes
Variable Name: idoc
Reference: payload:IDOCTYPE,1,IDOC,1,EDI_DC40,1,DOCNUM,1
Regards,
Erwin
Edited by: Erwin de Gula on Apr 28, 2011 7:57 AM

Insane XML Import, Huge Project, Duplicate file names work around...

I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
Sorry for the long confusing post....

I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
Kenn

Using sqlldr to load XML files and the file name ? or access the file name

I can use sqlldr to load the XML files when I declare the target table of XMLTYPE, but I need to load the filename and a sequence also with the XML in a table so we can mark wether the file passed validation or not.
something like ....
Create table test1
lobfn varchar(200),
load_number number,
XML_COL XMLTYPE
--------------- here is my sqlldr command
sqlldr xml_user/xml_user load_test1.ctl
LOAD DATA
INFILE *
INTO TABLE test1
append
xmltype(XML_COL)
lobfn FILLER char TERMINATED by ',',
XML_COL LOBFILE(lobfn) TERMINATED BY EOF
BEGINDATA
filename1.xml
filename2.xml
filename64.xml
sqlldr comes back and says "commit point reached - logical record count 64
but when I select count(*) from test1; it returns 0 rows.
and when I
SELECT X.* FROM tst1 P2,
XMLTable ( '//XMLRoot//APPLICATION'
PASSING P2.XML_COL
COLUMNS
"LASTNAME" CHAR(31) PATH 'LASTNAME',
"FIRSTNAME" CHAR(31) PATH 'FIRSTNAME'
) AS X;
It tells me invalid identifier ,
Do I need to use a function to get the XML_COL as a object_value ???
But when I create the table like
create table test1 of XMLTYPE;
and use sqlldr it works, but I dont have the file name, or dont know how to access it ??
and I can use
SELECT X.* FROM tst1 P2,
XMLTable ( '//XMLRoot//APPLICATION'
PASSING P2.object_value
COLUMNS
"LASTNAME" CHAR(31) PATH 'LASTNAME',
"FIRSTNAME" CHAR(31) PATH 'FIRSTNAME'
) AS X;

BTW
Here's a trivial example of what you appear to be trying to do..
C:\xdb\otn\sqlLoader>sqlplus scott/tiger @createTable
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Aug 2 22:08:10 2006
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> DROP TABLE TEST_TABLE
2 /
Table dropped.
SQL> CREATE TABLE TEST_TABLE
2 (
3    filename    VARCHAR2(32),
4    file_content xmltype
5 )
6 /
Table created.
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
C:\xdb\otn\sqlLoader>type sqlldr.ctl
LOAD DATA
INFILE 'filelist.txt'
   INTO TABLE TEST_TABLE
   FIELDS TERMINATED BY ','
    FILENAME       CHAR(32),
    FILE_CONTENT   LOBFILE(FILENAME) TERMINATED BY EOF
C:\xdb\otn\sqlLoader>type filelist.txt
testcase1.xml
testcase2.xml
C:\xdb\otn\sqlLoader>type testcase1.xml
<foo/>
C:\xdb\otn\sqlLoader>type testcase1.xml
<foo/>
C:\xdb\otn\sqlLoader>sqlldr userid=SCOTT/TIGER control=sqlldr.ctl log=sqlldr.log -direct
SQL*Loader: Release 10.2.0.2.0 - Production on Wed Aug 2 22:08:11 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Load completed - logical record count 2.
C:\xdb\otn\sqlLoader>sqlplus scott/tiger
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Aug 2 22:08:18 2006
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from TEST_TABLE
2 /
FILENAME
FILE_CONTENT
testcase1.xml
<foo/>
testcase2.xml
<baa/>
SQL>
If you are interested in the 11g beta program please contact me directory at
markDOTdrakeAToracleDOTcom

How can I get rid of "_data" behind xml file name

Hello everybody,
I use xfa.host.exportData("",0) to export xml file which I cann't appoint the name of xml. After I click the exporting button, a window jumps and fill the xml file name automatically, the name is "PDF file name_data.xml", in Adobe Reader Chinese version, "_data" will be translated by Chinese word, so it is not convenience to unify the method of getting xml.
My problem is if I can get rid of the postfix "_data" in xml file name? I doulbt maybe I can set in LiveCycle Designer, but I can't find out at present.
Thanks in advance!
Enlly

Hello radzmar
Thank you for you soon reply!
I learned about the function exportData(), and my form is not certified, so I use exportData("",0) to export xml file. After I click the export button, it will jump out a window to ask for selecting the path, where users want to save the xml file, and, in this window, LiveCycle will fill xml file name automatically by "xxxx_data" (xxxx is the pdf form name). I just wonder if I can avoid "_data" ?
Do you have any idea? Thanks!

How to get the column name and table name from xml file

I have one XML file, I generated xsd file from that xml file but the problem is i dont know table name and column name. So my question is how can I retrieve the data from that xml file?

Here's an example using binary XML storage (instead of Object-Relational storage as described in the article).
begin
dbms_xmlschema.registerSchema(
    schemaURL       => 'my_schema.xsd'
, schemaDoc       => xmltype(bfilename('TEST_DIR','my_schema.xsd'), nls_charset_id('AL32UTF8'))
, local           => true
, genTypes        => false
, genTables       => true
, enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_CONTENTS
, options         => dbms_xmlschema.REGISTER_BINARYXML
end;
genTables => true : means that a default schema-based XMLType table will be created during registration.
enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_CONTENTS : indicates that a repository resource conforming to the schema will be automatically stored in the default table.
If the schema is not annotated, the name of the default table is system-generated but derived from the root element name :
SQL> select table_name
2 from user_xml_tables
3 where xmlschema = 'my_schema.xsd'
4 and element_name = 'employee';
TABLE_NAME
employee1121_TAB
(warning : the name is case-sensitive)
To annotate the schema and control the naming, modify the content to :
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb">
<xs:element name="employee" xdb:defaultTable="EMPLOYEE_XML">
    <xs:complexType>
Next step : create a resource, or just directly insert an XML document into the table.
Example of creating a resource :
declare
res boolean;
doc xmltype := xmltype(
'<employee>
<details>
    <emp_id>1</emp_id>
    <emp_name>SMITH</emp_name>
    <emp_age>40</emp_age>
    <emp_dept>10</emp_dept>
</details>
</employee>'
begin
res := dbms_xdb.CreateResource(
           abspath   => '/public/test.xml'
         , data      => doc
         , schemaurl => 'my_schema.xsd'
         , elem      => 'employee'
end;
The resource has to be schema-based so that the default storage mechanism is triggered.
It could also be achieved if the document possesses an xsi:noNamespaceSchemaLocation attribute :
SQL> declare
2
3    res boolean;
4    doc xmltype := xmltype(
5 '<employee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
6             xsi:noNamespaceSchemaLocation="my_schema.xsd">
7    <details>
8      <emp_id>1</emp_id>
9      <emp_name>SMITH</emp_name>
10      <emp_age>40</emp_age>
11      <emp_dept>10</emp_dept>
12    </details>
13   </employee>'
14   );
15
16 begin
17    res := dbms_xdb.CreateResource(
18             abspath   => '/public/test.xml'
19           , data      => doc
20           );
21 end;
22 /
PL/SQL procedure successfully completed
SQL> set long 5000
SQL> select * from "employee1121_TAB";
SYS_NC_ROWINFO$
<employee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceS
<details>
    <emp_id>1</emp_id>
    <emp_name>SMITH</emp_name>
    <emp_age>40</emp_age>
    <emp_dept>10</emp_dept>
</details>
</employee>
Then use XMLTABLE to shred the XML into relational format :
SQL> select x.*
2 from "employee1121_TAB" t
3     , xmltable('/employee/details'
4         passing t.object_value
5         columns emp_id   integer      path 'emp_id'
6               , emp_name varchar2(30) path 'emp_name'
7       ) x
8 ;
                                 EMP_ID EMP_NAME
                                      1 SMITH

Conflict in file name : platform.xml

Similar Messages

Maybe you are looking for