Confused by Hosting

Hi
Can someone help me understand how all this ties together:
I have a personal domain and a personal website, the website was created in iWeb, it was published to my personal domain which i guess is hosted with mobileme.
Separately, I have bought several domain names and I have an unlimited site hosting package with godaddy.
Where I get confused is how I create independent websites in iWeb? Does iWeb only create multiple pages for 1 website or is it possible to have multiple websites, each published to their own domain name?
Thanks
Andy

I suggest you use iWebSites to create separated domain files for each of your web sites. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
This lets me edit several sites and only republish the one I want.
Once you have them separated and in iWebSites you can open the site you want to work on, publish to a folder and upload to the GoDaddy hosting server with an ftp client like the free CyberDuck.
You would then point (forward) the domain name to the appropriate web site folder at GoDaddy.
OT

Similar Messages

HOST not working on UNIX 9iAS

I am attempting to HOST a command out to the middle tier. When I try this in 9iDS, it works like expected (copy c:\temp\a.txt c:\temp\b.txt). However, when I push the form up to the unix box and attempt to run the same command on the server through the webforms (cp /home/foo/temp/a.txt /home/foo/temp/b.txt), it does not work.
Everything that I have read says that the HOST command runs the command on the middle tier (which is what I want), but something is not right. I have checked the UNIX permissions, tried running the command through a shell file [host('/home/foo/test_copy.sh')], calling it from a shell [host('sh /home/foo/test_copy.sh')] and anything else I can think off. A just will not copy to B. Any ideas on what might be wrong?
Steve "Stump and confused."

HOST are executed with permissions who had start Forms listener.
Check UNIX permissions. Named user can read sourse file and write into target directory. If target file exist then user can write it too.

IWeb Publishing Help!

Yesterday, I updated my second .Mac site and now I cannot access it using my domain name. I still can access my main site using the domain name and I access the second site using the web.mac.com domain. I did try to change the second site's name, but then changed it back. Could I have confused .Mac hosting?
My main domain name is: http://www.joyfulgrrl.com/Insights/Welcome.html
My second site domain is: http://www.joyfulgrrl.com/Jewelry_Box/Welcome.html
or
http://web.mac.com/kcmccabe/Jewelry_Box/Welcome.html
Has anyone seen this before? What could be the problem?
Thanks!

I am having real problems getting my iweb hosted on my domain and my domain just shows a message asking me to replace the index.html page
I have taken a few shots of the web hosts pages so I can talk you through where I am having problems.
My Iweb site is http://web.mac.com/darrangilpin
and the domain I have bought is www.darrangilpin.com along with a web hosting package.
I emailed them but they didn't want to help as I am using free web hosting.
Anyway, I set up my .mac account with the above domain and it shows it is setup for it on my Iweb templates and my .mac acoount
I did as it asked in my web server/host.. or so I think, I have just deleted the CNAME out incase I have done it wrong as you will see in the pictures.
.mac asks me to do the following...
To set up .Mac to use a personal domain name:
If you haven't already registered a domain name, visit an accredited domain name registrar on the Internet and register the personal domain name you want to use.
For information about registering a domain name, search the Internet for "domain name registrars."
If you're not already logged in to .Mac, go to www.mac.com, and log in.
Click Account in the left column on the .Mac homepage, and confirm your login.
On the Account Settings page, click the Personal Domain button, and then follow the instructions that appear.
When asked to enter your domain name, be sure to type the entire domain name (including the extension, such as .com, .net) that you've registered.
When you see a screen confirming that .Mac is configured to host your domain, go to your domain name registrar's web hosting area, and point your domain (by adding or changing a "cname record") to "web.mac.com."
For instructions on changing the cname register, contact your domain name registrar.
So I went to here on my web hosts site
http://img.photobucket.com/albums/v641/TheGuv/dns2.jpg
and typed web.mac.com into the subdomain and into the ip address/hostname. I tried all different ways including my iweb site address and leaving the ipaddress/hostname blank but still have no luck.
Do I need to do anything here??
http://img.photobucket.com/albums/v641/TheGuv/DNS1.jpg
Or do I need to find an index.html page somewhere on my system as the only one I can find is the one for OSX
Any help is much appreciated

Unable to access some HNSCs - 401 error

I have SharePoint 2013 ent, 2 WFEs, and a webapp designed for HNSCs, with SSL.
I have multiple "name space" Top level URLs, in that webapp.
Webapp URL = Intranetnetroot.domain.com Port 443
HNSC = Intranet.domain.com
HNSC = TopLevel1.domain.com (TL1)
HNSC = TopLevel2.domain.com (TL2)
This morning for some unknown reason, I am getting a 401 for anything in Intranet.domain.com. This has all been working for sometime, several months.
I am still able to access TL1, and TL2, but not intranet.domain.com, or any other site collections on that path.
I have "host file" mapped the URL to each WFE in the farm, and get the same results, so I don't think its the load balancer VIP.
ULS just shows a 401... I am site collection admin, Farm admin, and last I knew site owner as well. (me and my coworkers are that is also a site owners, are getting the same errors)
Any ideas?
Joshua Fuente

Hi Joshua,
If I may ask further, do you set automatically login at your IE settings? If yes, perhaps you can have a try to set it to prompt and check your credentials.
If the issue persist, you may consider to disable the loopbackcheck for testing purpose:
http://support.microsoft.com/kb/896861
For more detail you may have a check on these articles as well:
http://www.sharepointblues.com/2012/11/22/configurin-sharepoint-2013-host-named-site-collections-and-apps-host/
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
https://technet.microsoft.com/en-us/library/fp161236.aspx
https://hnsc.codeplex.com/discussions
http://www.wictorwilen.se/clearing-up-the-confusion-with-host-named-site-collections-and-path-based-site-collections
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Setting up a new site

Hi All -
I use Dreamweaver currently and I want to switch over to CFBuilder, but I can't get my server set up properly. I have network access to the drives on the server where the content lives. When I create a site in Dreamweaver, everything makes sense to me, but when I create a 'server' (I work on about 5 sites, all on the same server) I get confused by 'host name', 'context root', 'application server name'. Is there some documentation somewhere that tells me what to do?
I guess I should also note that we are on CF8.
Any assistance would be greatly appreciated.
Thanks,
Rob

Hi Bhakti,
Long time no speak!
I recently re-installed our internal testing server to run as CF8 Multiserver. I could never get the Standalone or even the ColdFusion 9 Beta to work properly with CF Builder.
I ran through the steps on your blog for the Multiserver install, and I ran into this error when running adminstart.bat.
"This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem."
Within the Command Prompt I see the following:
"Error loading: C:\JRun4\jre\bin\client\jvm.dll"
Why might this be? I just re-installed CF8 from scratch, so why would files be missing? I am currently running CF Builder Beta 2.
Thanks,
Jose

Not very savvy, confused about the features(client hosting, in browser editing)! Clarify for me, please?

Hi! I'm in love with the idea of in-browser editing. I'm doing web design for clients using Adobe Muse at the moment, and it's great. The only setback is that it's really hard for the clients to update the page themselves, etc. My main and only reason to use BC would be to upload all of my clients websites on it and let them use the in-browser editor. Am I wrong to think that that's how it will work? I sign up, and just upload the websites with their own domains, then set up the client's log in info for them?
I've heard about a limit to how many websites I can have, and users. Are the users the amount of clients I can let use the in-browser editing? Only 3? Please help me out, team!
Right now I'm using a different hosting (will not name) it was my first hosting provider, and I've used it ever since so I'm so used to unlimited websites, etc. Obviously, I'm so impressed by the BC features though that I really want to be apart of it.
Also, would this be under the $12 a month plan?

Adobe just released this in-browser editing tool for Muse websites- you might want to try it:
Adobe® Muse™ CC In-Browser Editing
As far as I am aware, there is no limit to how many website you can have. The 3 that you have mentioned is likely referring to 3 admins per site- but note that you can have more admins for a fixed fee.
You might also be getting confused by 5 free basic sites that come with a creative cloud subscription- so fyi, you can have as many sites as you like and the hosting fees, I believe, start from around $6-$39 per month.

App Hosting confusion

Hello All,
I have a development machine VM for sp 2013.
If I want to develop an app can I go for provider hosted app?
Really these words are confusing a lot to me (SharePoint hosted, Provider Hosted, Auto Hosted)
why Microsoft doesn't provide some friendly name ....SharePoint hosted and Cloud Hosted.....
why do we need 3 hosting environments ?
In all 3 we will write the same code (javascript,jquery,knockout,bootstrap css,angularjs) ,rest apis .....why should we have 3 hosting techniques?
We can use CSOM everywhere ,we can develop apps on client side and we can package them as apps in all 3 environments,then why do we need 3 hosting techniques?
Like Cricket

Hi,
The pattern Auto-Hosted no longer exists. Now, there are two patterns : "SharePoint Hosted" and "Provider Hosted".
The fact is that "Provider Hosted" allow you to develop by using server code and any language supported by your web server or hosting service contrary to "SharePoint Hosted" pattern.
Have a look at this link :
https://msdn.microsoft.com/en-us/library/office/fp179887.aspx?f=255&MSPPError=-2147217396
Regards.
Gilles Martinez
Twitter
Blog
Please mark as helpful/answer if this resolved your post

Etherchannel Load-Balancing To Host (Confused)

I'm a bit confused as to how an etherchannel load-balances traffic across all the links, in the port-channel. If I have a 4 port etherchannel, to an AIX host, does the traffic load balance across all 4 ports? In reading the load-balancing documentation, it states that a global configuration of src-mac forwards traffic from the same host, over the same port, all the time, whereas it forwards traffic over different ports for other hosts. What if it's the same host tied into the port-channel? So if my AIX box has 4 ethernet cards in a port channel, each ethernet card goes over only one link? If the ethernet cards are bundled, into a port channel config, is there no way to load balance all the traffic? Maybe I'm misunderstanding the etherchannel configuration and how it works. Thanks for any and all help!!
Dan

Port channel is link aggregation for all traffic which will get distributed across all links. A given ip conversation will only travel down one of those links at any given time. The single ip conversation is not carried say for instance across all 4 links if it's a 4 port etherchannel.

I need to host a website with a SQL database - Azure pricing details are too confusing

Hello,
I need to give a potential client a hosting price for a somewhat simple web application they want me to build. I told them it shouldn't be a problem. After gathering the requirements, I figured I would use the following technology to build and host
it:
ASP.NET 4.5
MVC 5
1 SQL Database ~ 25GB with options to expand and also with a backup
SSL certificate needed
Hosting would be on Azure because I have some experience using Visual Studio 2012 and integrating the Visual Studio Online (TFS) source code and scrum web applications. I've never actually spun up a website with a SQL database using Azure before, but I
imagined it wasn't too difficult to find a general hosting plan to support the above requirements.
The use of the website will be very simple and limited to the basic CRUD operations. Will support forms authentication using the Identity 2.0 framework. The web applications main purpose is to fill out a form for new accounts, have a search page for
those accounts, a page to view a created account and add notes to it. So performance wise, it isn't asking for much. I just want it to be fast and secure.
So I start looking on the Azure's pricing landing page which is here: (can't put links in here, but search Azure pricing on Bing) and I see this Pricing Calculator, so I click it
First thing I notice is the Websites tab doesn't mention SQL Database - in fact the Data Management is a separate tab from Websites. And if I made my selections on the Websites tab, the estimated monthly price doesn't stay the same when I go to the Data
Management tab - so I get the illusion I have to have two separate purchases.
I'm not exactly sure if the Pay as You Go billing feature would be okay because it's just a bit scary to leave every monthly payment up to chance; somewhat. Would love to know if there is other payment options that I could see for what I described above.
I want to use Azure to host my asp.net website - it makes sense and the integration with Visual Studio is amazing. I love the publish feature for both MVC 5 Projects and SQL Database Projects.
Thanks in advance for the help!

Hello jdevanderson,
I suggest that you start by looking at the pricing TIERS for the Azure website. This link will give you clarity on different Service TIERS that are availaible:
http://azure.microsoft.com/en-in/pricing/details/websites/
You can guage your requirement and choose the Service TIER accordingly.
And regarding the database, you are right about it. You will be charged seperately for the database. You can refer to this link that will give you clarity on SQL database pricing:
http://azure.microsoft.com/en-in/pricing/details/sql-database/
Refer to this link for more information on 'How pricing works':
http://azure.microsoft.com/en-in/pricing/
Use the full calculator to add your website and the database to get an estimated cost:
http://azure.microsoft.com/en-in/pricing/calculator/?scenario=full
Thanks,
Syed Irfan Hussain

SharePoint remote provider hosted apps - confusion around key questions

For some time, I have been trying to get a provider hosted app setup to work, and I am afraid that I - as a relative novice - must have missed some key points despite hours of googling and reading. Here's my questions:
A remote, provider hosted app, would have its AppWeb in a domain that is different from the host SharePoint Farm in which it is gets installed and used. In other words, the AppWeb may be located at remote.contoso-apps.com, where as the SharePoint farm uses
for instance spslocal.mycorp.com. However, when you - in the SharePoint host farm - set up your App Domain/App isolation - you can only provide one value - which in this case would then need to be remote.contoso-apps.com??? Does that mean that each SharePoint
Farm can only contain Apps from one vendor delivering remote apps? Or is the key in hard coding the app web in the manifest? (However, even if I've tried this it seems like the token SPAppWebUrl still translates into the pattern defined in the App Isolation
Settings in the host farm???).
Back to the AppWeb: Many bloggers have mentioned that you have to add some kind of SharePoint element to your App project (not the Web Project part) to get the AppWeb provisioned from Visual Studio 2013. But at what stage are these SharePoint elements actually
provisioned - during some kind of publish operation of the Web Project part (the Pages, Scripts etc.) or when you install the app package (hardly the latter, since the first installation may be when a customer installs the app???). The reason I ask is (of
course) that my SharePoint Elements do not seem to get provisioned. And just to test my very basic understanding: the AppWeb can be any pure IIS web site from the start - i.e., not a SharePoint Web App?
Thanks for any help on these challenging issues!

Paul,
thanks for your effort, but unfortunately the answers do not get me much further.
Question 1: You write "You can only use one domain, because cross-domain IFrame requests are blocked in SharePoint 2013". This is contrary to numerous other articles that explain how the SharePoint cross-domain library (SP.RequestExecutor.js) can be
used to communicate across domains. From the outset, the whole idea about an AppWeb is - according to Microsoft documentation - that the AppWeb should be isolated from the HostWeb and therefore in a separate domain.
This article,
http://msdn.microsoft.com/en-us/library/office/jj612823(v=office.15).aspx, even talks about scenarios where the SharePoint Host Web and App Web are in different security zones!
So according to a load of other documentation it is indeeed a valid scenario I am addressing, but I still miss the key answers to the questions above. I suspect that the key is to hardcode certain URIs in your app that points to the cloud AppWeb
(so the single App Domain specified in the Host Farm is not used at all), but I have failed to find the necessary documentation on this.
Question 2: The article mentioned does not talk about the issues that I have asked about, specifically when the SharePoint elements in the App are created.
Anyone with experience in this area? Thanks!

Etc/hosts confusion

hi everybody
i have a general question regarding entries in hosts file.
OS : OEL 5
during the installation lets say if i assign a name (test > as localhost)
and (db > as localdomain) and i do not assign any static ip to it.
then the entries in my hosts file be like this
127.0.0.1 test.db test
right ???
will it cause any problem in hosting the software ??
or if i assign a static ip but dont give any DNS ips etc ???
will that cause any problem in hosting ???
i am doing it for my practice purposes.
so what the best option in that scenario ???
Regards !

Cbl wrote:
hi everybody
i have a general question regarding entries in hosts file.
OS : OEL 5
during the installation lets say if i assign a name (test > as localhost)
and (db > as localdomain) and i do not assign any static ip to it.
then the entries in my hosts file be like this
127.0.0.1 test.db test
right ???
will it cause any problem in hosting the software ??
or if i assign a static ip but dont give any DNS ips etc ???
will that cause any problem in hosting ???
i am doing it for my practice purposes.
so what the best option in that scenario ???
Regards !IP 127.0.0.1 is universally understood to be 'localhost'. DO NOT CHANGE THAT!
What you want to ADD TO your /etc/hosts is a line with the assigned static ip address of the server:
# @(#)B11.23_LRhosts $Revision: 1.9.214.1 $ $Date: 96/10/08 13:20:01 $
# The form for each entry is:
# <internet address>   <official hostname> <aliases>
# For example:
# 192.1.2.34   hpfcrm   loghost
# See the hosts(4) manual page for more information.
# Note: The entries cannot be preceded by a space.
#   The format described in this file is the correct format.
#       The original Berkeley manual page contains an error in
#   the format description.
127.0.0.1            localhost
123.456.789.101 hostname.domainname hostname

Hosting, sitemeter, google, mass confusion and horror

I'm completely ignorant when it comes to website related stuff - makes me wonder why I tried to get into it - so I could use a bit of insight.. Here's the issue:
When I first bought my domain, I set it up through Google's hosting service. Realizing I had no idea what I was doing, I went to iWeb. I have a fairly successful site going now, but I'm not able to track it accurately using Sitemeter because (I think) of the original hosting.
Google set me up with a start page. Now, when going to my site it will redirect from site.net to start.site.net. It was my understanding that I've moved hosting from Google to my .Mac account, so maybe I've set it up incorrectly?
After working with Sitemeter support it sounds like the reason I can't get accurate stats is that the site redirects. I can see that someone visited, from where, and for how long. What I can't see is the pages that were viewed, because it will only show me the a "widget markup" page.
Is it possible to remove the redirect? If I set up hosting elsewhere, would I still be able to use iWeb to edit the website? (something tells me no)
Thanks for any insight. Be gentle.. I'm techretarded.

I'd suggest you to try using Statcounter
http://alyeska.altervista.org/en/iWeb_Statcounter.html
Note that you have to add the code statcounter gives you to each page.
How you achieve that is up to you...
(on the site of the previously linked page you will also find a page dedicated to personal domains and how to set them up)

Different email accounts but same host confusion

Hi,
I am trying to set up the mac mail client and have a number of email accounts on different domain names but they all share the same incoming mail server as all hosted on the same server but i receive an error message:
The account “[email protected]” already has this host name and username
Any one have an idea how to bypass this?
The email addresses are different domain names but the incoming mail server is the same on all email accounts due to the SSL cert on the server.
Thanks in advance

hi,
here is an example
[email protected] has incoming mail server of mail.domain1.com and this domain has the ssl cert against.
2nd account that errors is [email protected] incoming mail server would be the above mail.domain1.com due to the ssl cert yet the mail app picks up the user name sam for [email protected] as if its [email protected] yet they are two different accounts
hope this explains more?

Apache virtual host with OSX Server?

I have been running OSX Server for a while now, and just recently I decided to get McMyAdmin for my Minecraft server. The web client for McMyAdmin runs on port 8080, but I wanted it on port 80. I wanted to use it with my domain, so I just created a sub domain and pointed it to my server. The problem is that OSX Server apparently doesn't let me use port 80, even when websites are turned off. I decided to delete Server and just use plain apache. This worked until I realized that my website was only accessible locally. I have all the correct ports forwarded, etc. But I get the error:
Response Error.
Technical description:
502 Bad Gateway - Response Error, a bad response was received from another proxy server or the destination origin server.
when I try to connect from outside my network. This is probably just some simple thing I missed but it would be nice if someone could just point out what I did wrong here. Back to the point, I want to know how to run the proxy to my web client on port 8080 AND ALSO run OSX Server with or without apache virtualhost.
Thanks in advance,
Eamon

Web is stupidly easy - Apache has extensive support for multiple virtual hosts in a single server and will happily support as many domains/hostnames as you can throw at it.
Mail is a little trickier since it needs to hook into some kind of directory server to validate user addresses.
Mac OS X's Open Directory does support this, but it's a little cumbersome (basically every user has to exist in the main Open Directory domain as well as having a secondary email address(es) in the other domain(s).
This can get especially tricky when you have users with the same shortname in different domains - for example if you give [email protected] a secondary email address of [email protected] and you then get a new user [email protected], you can't give the third 'joe' the address 'joe' in Open Directory since that's already taken. This means he'll have to login using different credentials from his email address. Confused yet? You bet.
If you're prepared to eschew Open Directory you can just use Postfix's built-in support for virtual hosting, but it's a little more complex to setup and support and is entirely command-line based (i.e. there's no GUI for setting it up or supporting it).
So, for that reason you might be prepared to setup multiple virtual machines for each domain. It really depends on how much the domains are related (if at all).

I can't get my website to connect to mysql database hosted on my yahoo site

I used David Powers tutorials to build a CMS website in Dreamweaver using a testing site set up on my computer. I installed XAMPP and got it working on my computer. (I have a Windows 7 PC with Dreamweaver CS6)
Now I have installed the mysql database on my remote site following the instructions in the help section of Yahoo Small Business, where my website is hosted. I recreated the same database on the myPHPAdmin on my remote site. (If I understood what I found out when searching for a solution, Yahoo doesn't allow me to see the database from Dreamweaver. It seems that I have to make sure the connections are correct and then upload my site to the remote server. Then it should work once up)
Following the instructions I could find on Yahoo it seems that all I needed to do was make sure that the user name and password were the same as on my local computer and change the my Sql Server in the Server Connection in Dreamweaver CS6 to mysql instead of localhost, upload my website and it should connect. When I go to my webpage online I get "No database selected".
I know html, css, some php, and mysql.
I have been using Dreamweaver for approximatley 2 years and have created 2 successful websites for my husband, who is a photographer. He now wants to have a blog type news website and since I couldn't get Wordpress to do what he wanted to do I decided to create a CMS website. It works great on my computer, but now I need it to work on my remote site.
I know it's probably something really stupid that I have overlooked and I would really appreciate any help I could get.
I'm more than happy to learn whatever I need to learn to get this done. I have been searching all kinds of forums and I can find a lot of posts about this or a similar problem, but no solutions.
Please let me know if I need to provide more information.

I'm sorry, the way I wrote that was confusing. In mysql it suggested you create a new user that had limited access to access each database you created, rather than use the root user which had all permissions. So in both the mysql on my computer and the mysql on my website I created a user with the same username and password, so that when my website was on my remote server the username and password were the same as when I was testing it on my local computer.
SnakEyez02 wrote:
Following the instructions I could find on Yahoo it seems that all I needed to do was make sure that the user name and password were the same as on my local computer and change the my Sql Server in the Server Connection in Dreamweaver CS6 to mysql instead of localhost, upload my website and it should connect. When I go to my webpage online I get "No database selected".
Just looking at that part of your response, I don't get what they are asking you. Typically the remote host will require that you update the username/password and possibly SQL server. When you are in most shared environments, which is what I presume you are in, you typically have a username that is prefix_username. So you should be updating your script to match that information, not the other way around. Also with the "mysql instead of localhost" comment, you would only change the script from localhost to another server (ip address) if the mySQL server is not on your web server. If you host tells you this is true thent he value should be an IP address instead of localhost. Is that the case?
For the second part of your question in the "Why can't I access my database" help on Yahoo it says "If your PHP or Perl configuration files require a host name, you may have a problem with your host name. Make sure that you are using the host name mysql, not the default host name localhost." I assumed that meant that in the setup menu when establishing a server connection I needed to replace "localhost" as the mysql Server with "mysql" and then upload my website. This didn't work. Since the mysql server I am trying to access can be accessed using phpmyadmin at www.mywebsite.com/phpmyadmin this seemed to make sense to me. I think I might have managed to access the mysql server, but I'm not choosing the database I want correctly.

Confused by Hosting

Similar Messages

Maybe you are looking for