CONFUSION ON WHAT IS THIS NOTEBOOK SO TO GET THE CORRECT DRIVER FOR THE SOUND CHIP
THE BOTTOM OF THIS NOTEBOOK SAYSIT IS:
PRODUCT: HP PAVILION dv 1000
SN#[Personal Information Removed]
PN# PM054UA#ABA
NOW WHEN I PUT IN THE PN# IT BRINGS UP
HP Pavilion dv1040us Notebook PC Drivers
IS IT POSSABLE THAT THIS WAS BUILT AT THE TIME OF THIS CHANGE. THE SOUND DRIVER FOR THE 1000 DOES NOT MAKE A CHANGE AND THERE IS NO SOUND BY THE BUILT IN HARMAN/KARDON OR HEADPHONES.
MAYBE IT IS A BURNT OUT CHIP AND IF SO WHAT SOFTWARE CAN I USE TO TEST THIS?
I HAVE TRIED ALL I KNOW AND AM OPEN TO SUGGESTIONS. DO I CHANCE USING THE DRIVERS FOR THE 1040?
THANKING ANYONE FOR ANY SUGGESTIONS. J
This question was solved.
View Solution.
Hi,
The following link shows the specs of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00247186
Yes, it is a dv1040us and its product number is PM054UA#ABA. Tis must be very old machine because I can't find more than:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=43374...
For sound, please try Conexant CX20468-31 AC97 Audio Driver:
http://ftp.hp.com/pub/softpaq/sp28001-28500/sp28481.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
Thanks in AdvanceHi Hunt,
Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
what do you think ????
Peter -
What are the correct settings for the Canon 5D mark II in FCP 7 ?
I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
JimWelcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.) -
What happened to the printer driver for the HP Laserjet 1020?
After installing HP Printer Driver Update v1.1.1 for Mac OS X 10.5.3 my HP Laserjet 1020 no longer works. When I sent a print command from any software it seemed to work properly, but nothing printed. The information in printer utility window indicated that the printer was ready and there were no items in the queue.
I removed the printer and attempted to reinstall with the updated driver. However, there is no driver for the 1020 in the driver selection menu, despite the fact that it is listed as one of the drivers included in the update.
Can anyone suggest where I can obtain the appropriate driver?greg sahli: I followed your suggestion to reset the printing system and re-install the driver update. While there is indeed a Receipt for the 1022 Series pkg, the driver does not appear in the drop down menu. The drivers closest to the 1020 that appear are 1010, 1012, 1015, and 1100. None of these drivers work.
I did find an 80% solution at Macosxhints. I will make do with this until the new OS X system comes out. If it has the 1020 or 1022 driver that works with my printer I would probably buy it. However, if it does not and the fix from Macosxhints doesn't work with Snow Leopard I'll be hard pressed to justify an upgrade until my printer dies.
Anyone interested can find it at the following url, if it is still active (there are no spaces in the url):
http://forums.macosxhints.com/showthread.php?s=eb4fe0d44e9dcd41a8da863618e391ac& t=40933&page=10 -
What is the "correct" name for the new iPad? Is it also called the 3rd Generation?
I have the latest iPad, purchased Mar '12. But when I read Apple News it is referred to as the "new ipad" & somtimed the 3rd Generation. What is the "correct name & will "SIRI" be available with this Fall latest update? Thanks!!!
Yes, it is somewhat confusing isn't it. Almost like, the iPad is having an identity crisis. I believe the official Apple line would be that it is the "New iPad" but I see it referred to the 3rd generation just as frequently as the new iPad.
Siri will be available for the "new iPad/3rd Gen when iOS 6 is released this fall. -
What is the correct charger for the new iPad Air 2?
Our new iPad Air 2 came with a 10Watt charger. Went to the apple store to get a spare. The Apple folk insist the 12 watt unit is what it needs - sold my will two. Just trying to figure out which is correct for a new Model= 'MGKL2LL/A' iPad Air 2.
ThanksSkydiver119 wrote:
Either will work. Many people say they received a 10W with their iPad, but it will charge just fine with a 12W. Previous models were shipped with 12W chargers, so no one really knows why the 10W was put in with the Air 2.
I would guess the Air 2 got a 10 Watt Charger, because the battery in the Air 2 is a bit smaller than the battery in the Air. -
I'm trying to make a DVD menu in Encore, and then when it came round to loading my AVI files into it, bam. Apparently, I don't have the decoders necessary - this is unusual.
I'm running on a Apple MacBook Pro, and I have Perian installed for all my codec needs. I just don't understand!
Any help would be most appreciated...Welcome to the forum.
It is most likely that the error message is telling you the truth - the necessary CODEC is not available. It might not be installed, or might be broken.
The first step is to gather the full details of your .AVI files. This ARTICLE will help explain the potential issues. Sorry that the utilities mentioned are for the PC. Do not know if you can run them in Parallels, or Bootcamp, or other, but similar should be available for the Mac if you cannot.
I have to admit that I know little of Mac's, and especially how they install and handle CODEC's. On the PC, I can offer help there, but not in this case. Again, with my "sorry."
There could be two ways to handle the issue, and that might depend on the info gathered afer you read the above article. It could be that the simple installation of the proper CODEC will fix it perfectly and easily. Or, it could mean that you will need to convert your .AVI to something along the lines of a DV-AVI. Though I do not use them in Encore, I have no problem working with .MOV [Animation CODEC] files from FCP in my PrPro. I've just always done all editing in PrPro, before Exporting/Importing to En. I do not know how En will handle .MOV's, but if some Mac-only CODEC is used, probably not so well.
Good luck,
Hunt -
What are the correct permissions for the Home folder?
Since buying my first mac (G4 iMac) I've since bought 2 other macs & transferred my home folder from the older computer each time. Since then I've messed around with the permissions of the Home folder a few times to try share files & folders between my Windows PCs. So the permissions of the Home folder on all computers could be messed up a little.
I want to set up permissions how they should be set up as default.
I created another user account with admin priveliges & it looks like the Home folder should be set up as follows:
Owner: 'my name'
Access: Read & Write
Group: admin or 'my name'
Access: Read only
Others: Read only
And the sub folders (Documents, Pictures etc.) should be set up as follows:
Owner: 'my name'
Access: Read & Write
Group: admin or 'my name'
Access: No access
Others: No accesss
Is this correct, & if so shall I just set permissions on my Home folder exactly the same as the new account I set up?
Or is there some way of resetting permissions for the Home folder?
(I know repairing permissions with Disk Utility doesn't do this).
Power Mac G5 Dual 2.3, 2.5 GB RAM, 20 Cinema Display | MacBook Pro 2.0 15" Mac OS X (10.4.6)Mac OS X does not have a built-in way of doing this, but you can make one yourself. Open the Script Editor in the /Applications/AppleScript/ folder and enter the following:
do shell script "chmod 755 ~"
try
do shell script "chmod 700 ~/Desktop"
end try
try
do shell script "chmod 700 ~/Documents"
end try
try
do shell script "chmod 700 ~/Library"
end try
try
do shell script "chmod 700 ~/Music"
end try
try
do shell script "chmod 700 ~/Pictures"
end try
try
do shell script "chmod 755 ~/Public"
end try
try
do shell script "chmod 755 ~/Sites"
end try
This script can be saved as an application, which makes it possible to fix the permissions on a home folder with two clicks. The try statements are included so that the script will run if a folder doesn't exist. If the ~ object is a symbolic link, the permissions on it may not be changed; you can use the code block
tell application "Finder"
set the_home to POSIX path of (home as alias)
end tell
do shell script ("chmod 755 " & the_home)
in this case. The rest of the script works as before.
(12450) -
I ran a full AD import which gave me about 20K of adds.
Per the FIM Book I have I set a connector filter to filer out the admin and built in sync accounts
After running that MA I got 2 adds.
How do I get my AD users into the portal if FIM service does not import them. Is it a synch? I don't want to synch anything from the FIM DB back into AD, so I am being cautiousHi,
import just fills the connector space of fim sync.
connector space is like some kind of cache of the connected data source which FIM lets calculate delta which need then to be synced to the MV
so after import you need to have a sync rule in place for ad (or MA import attribute flows).
if objects needs to be created in MV you must project them by either projection criteria or by enable ceate object from external data source in sync rule.
Objects are in MV then, an will can be exported to fim service ma regarding to the export attribute flows of the fim service ma.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com -
When sending an email from my Ipad. I get "receipient was rejected by server because it does not allow relaying". What does this mean and how do I correct it?
On the email account's settings (Settings > Mail, Contacts, Calendars and tapping on the account on the right), go into it's outgoing SMTP settings and try putting in your email name and password (they might currently show as 'optional')
-
I set up my work e-mail account on my iphone 4S. When I try to send an e-mail message from my phone, an error message occurs "Cannot Send Mail" - "recipient was rejected by the server because it does not allow relaying". What does this mean and how do I correct it?
Get the correct mail server settings from your IT department.
-
What does this error mean? There was an error in the App Store. Please try again later. (100)
what does this error mean? There was an error in the App Store. Please try again later. (100)
I have the same problem and thought it might be related to moving to Denmark. My app store account was set up for USA and then the error number in parentasis was (13). After changing the profile to Denmark the number changed to (100), like yours
-
I was trying to hide just my clock for the history and the menu bar(file,edit all that), I dont know what i clicked but it got rid of everything except for the bookmark tabs. I know if you right click on the menu bar you can fix it, but since there is no menu bar anymore, this isnt working. i looked up how to do it in the forum found out you can press alt and do it that way, maybe i didnt do right, but that didnt work either.please help me!
== This happened ==
Just once or twice
== I tried to hide my history and menu bar, and it jost got rid of it all. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0)If that still doesn't work then see http://kb.mozillazine.org/Corrupt_localstore.rdf
(caution: do not delete the localstore.rdf file in the Firefox program installation folder)
Note:
Deleting the file [http://kb.mozillazine.org/localstore.rdf localstore.rdf] will reset the customizations of the toolbars to the defaults.
You can rename ''localstore.rdf'' to '''localstore.rdf.sav''' to test if that solves it.
Then you can restore the customization by copying ''localstore.rdf.sav'' to ''localstore.rdf'' if it didn't work.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?
I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job. -
i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes page.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
Time Machine questions: Handling backups for multiple Macs to one FW drive
I am reviewing the Time Machine thread and seeing a lot of helpful information, but I would like to ask something I haven't quite found yet. We have 2 Leopard Macs, a MacBook Pro and an intel iMac... with plans to upgrade another MBP from Tiger to Le
-
HI, i'm having this error message [There was a problem downloading the software for the iphone "banster's iphone". An unknown error occurred (-23)] when im doing the upgrading to IOS 5. anybody know how to slove it? Thanks
-
Hard drive suddenly decreases space using programs
Yesterday I ran into problems with my hard drive as I was working away on photoshop. It came up with errors saying the scratch disk was full and I saw that my disk space had run to 53KB left and then to 0. I deleted some files closed PS and reopened
-
Check Storage location while raising PO/SA
Dear expets, Is there any config setting for this Requirement. If Sloc is not maintained for combination of Material and Plant (MMSC) then error message should come at the time of creating PO/SA.Presetly system is taking any storage location of that
-
Speed fallen by more than 20% overnight
With Infinity1 installed the download speed has fallen away again. After having a stable rate 20-22Mb for several months, 2 weeks ago my IP profile changed, and in now capped at 17.42Mb ! Previous visits by BT engineers performed line tests and found