Confused on FIM Service MA. It does not seem to be pulling my AD users into the correct place for the Portal

I ran a full AD import which gave me about 20K of adds.
Per the FIM Book I have I set a connector filter to filer out the admin and built in sync accounts
After running that MA I got 2 adds.
How do I get my AD users into the portal if FIM service does not import them. Is it a synch? I don't want to synch anything from the FIM DB back into AD, so I am being cautious

Hi,
import just fills the connector space of fim sync.
connector space is like some kind of cache of the connected data source which FIM lets calculate delta which need then to be synced to the MV
so after import you need to have a sync rule in place for ad (or MA import attribute flows).
if objects needs to be created in MV you must project them by either projection criteria or by enable ceate object from external data source in sync rule.
Objects are in MV then, an will can be exported to fim service ma regarding to the export attribute flows of the fim service ma.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Similar Messages

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer. This happened after I agreed to a failed software update.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have apples new ipad but my video quality is rubbish and does not seem 1080p but compared to my fujifilm camera the 1080p video is brilliant! Please help..

i have apples new ipad but my video quality is rubbish and does not seem 1080p but compared to my fujifilm camera the 1080p video is brilliant! Please help..

Try your iPad with some of these demo clips; go for the 1080p trailer.
http://www.h264info.com/clips.html

HT5622 I have set up my ipad but cant remember the 4 digit code I put in . I cloud does not seem to have any record of me and the ipad mini keeps locking me out as i try different codes - help please

Help please I have just got my Ipad Mini and set it up but cant remember the code I put in. I cant access settings or anything else as it has locked me out. Ive treid Icloud but it doesnt recognise tht I have registered. Can anyone give me straightforward instructions on how to start again please

This is the guidance from Apple:
http://support.apple.com/kb/HT1212
Barry

HT1386 my phone does not appear in iTunes when i plug it into the pc?

How can I get my pnoe to appear in Itunes whenI plug it into my pc, It doesnt appear anywhere?

Please follow these steps:
http://support.apple.com/kb/ts1538
Hope I helped.
Cheers

EDI 810 - Delivery note/service entry sheet does not exist

Hello,
When 810 Inbound Invoice IDOC is processed with two different materials having the same delivery note number using the function module IDOC_INPUT_INVOIC_MRM, the IDOC post with error code '51 Delivery note/service entry sheet does not exist' Message class M8 Message number 183. The goods receipt has already been posted for the materials with the same delivery note number in SAP.
Any feedback??
Thanks

Hi
i had a Similar issue, where the IDOC is getting stuck with Delivery note does not exist.
You can check Note 1063742. this may help you here. If the note does not work for you then there could be an issue with the fucntion module ME_SELECT_DOCUMENTS since it is only looking for table EKBE-VGABE. where vgabe EQ '1' OR vgabe
EQ '6' but the delivery document no in the table is 8.
I am guessing that this could be the issue. My Issue is still not resoved, so i thought of sharing my inputs with you.
this may work for you.
If this is already solved for you do let me know what has been done here.

HT1848 How to transfer Ipad music NOT purchased from Apple to Macbook Air. Answers found in the Community does not seem to deal with the questions some members already ask.

how to transfer Ipad music NOT purchased from Apple to MacBook Air. Answers found in the Community does not seem to deal with similar questions posted to the Community.

You can only transfer purchases from iTunes on the iPad into iTunes on your computer. If you bought the music from another source, you need to use the source app to transfer the music, or you need a third party app to transfer the music.
http://www.wideanglesoftware.com/touchcopy/

MSI transform file does not seem to be preventing updates

So I have noticed that in the last few versions, the MSI transform file (MST) that i have been using does not seem to be working in terms of stopping the update nag on the users machines.
My transform file has the following entries:
4. under property, change the ISCHECKFORPRODUCTUPDATES to 0 and the AgreeToLicense to Yes
5. Under Checkbox, also change ISCHECKFORPRODUCTUPDATES to 0
Has there been a new key added or something? Becuase my users are still getting prompted, even with these changes.

I think it was previous versions of flash which had been installed outside of the gpo that was causing it. The problem has dissapeared somewhat, or well I havent noticed it on the last few flash updates. I would make sure that the version of flash on the machine is the one installed via GPO. It could be that the user or an administrator had installed a non GPO/MST version of it, which was I think the case with us.
I attached both my transforms for acrivex and plugin for version 11.5.502.110, but it should be similar. I have not noticed the popup in a while so i think i got rid of the problematic flash copies on the machines due to reimaging or uninstalling old flash on a case by case basis. sorry to say!
Oh i cant upload files, oh well. its just 3 properties:
But if anyone else has the problem and knows a solution, feel free to update! there could be another property in there somewhere, however like i said I have not seen the behaviour reoccur, especially on newly imaged machines.

The search feature in messages does not seem to work with pre IOS 7 messages

After updating to IOS 7 the search feature in the Messages app does not seem to work with messages received prior to the update. Texts received since the IOS 7 update search correctly. Is this a bug or a feature of moving to iMessages rather than just receiving standard texts?

Although not related to your question you have outdated ShockWave Flash Player go ahead and update your flash player by going to www.get.adobe.com/flashplayer
As for your problem, One of your add-ons might be the culprit too. Try running Firefox in [[Safe Mode]] with all add-ons disabled. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]

ERROR: Cannot start mail services, configuration directory does not exist

I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
Is this something to worry about?

Hi Joel,
You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
Jeff

HT4995 My location service on Google does not work and nothing is getting saved in my history bookmark

My location service on Google does not work. It will not bring up my location. Also nothing is getting saved in my history folder in my bookmark.

I have the same issue, I think. If I open Safari and search Walmart (google is my default search) it doesn't give me location results, and there is a little button at the top that says 'Use Precise Location.' If I tap that button nothing happens. Very frustrating. I've checked all my settings against my wife's iPhone, and my iPad, both of which work, and I can't find anything different.

America's top number one wireless service...does not work in Puerto Rico

Please come back to Puerto Rico. I have been a member for over ten years. I live in Ohio and will have to relocate to Puerto Rico. My daughter is enrolled in college to become a school teacher in Puerto Rico. My family plan is not working well in Puerto Rico. I am paying for a family plan, (here in Ohio) and my daughter has two phones in Puerto Rico. They are not working. I had called Verizon Support, and was told that the phones must be mailed back to (Ohio) me here in the states to be reactivated. Verizon phones cannot be activated in Puerto Rico. I prefer only Verizon, which is why I have not switched to any other provider. But, because Verizon does not have towers or businesses in Puerto Rico, even though we have 4G phones, we now have no service in Puerto Rico. I am stuck with the choices of AT&T, T-Mobile, or Straight Talk from Wal-Mart, or the WORSE are the wireless and Internet services of Puerto Rico, Claro.. Claro has outages for DAYS and still expect full payment, regardless of how many days lost for service. Claro does not credit your account even if you had an outage for a week; you are still billed for the full month. It is difficult to avoid this company in Puerto Rico. This is a message to CEO of Verizon...please bring your business back to Puerto Rico. When people asked my daughter what service she uses, they were excited when she said that she uses Verizon. But were disappointed when she said that her account is back in (Ohio) the states, there are no stores here. I have to send (AGAIN) two new phones activated here in the states back to Puerto Rico, so that my daughter can still use our Verizon Family Plan. There is nothing Verizon Support can do. Once I move to Puerto Rico, there will be no one to send our phones to in (Ohio) the states to reactivate for our Verizon Family Plan. The phone service works for about three or four months, (in Ohio) than there is no service at all. Please bring America's top number wireless service back to Puerto Rico. Or Make some kind of deal with the wireless tower owners in Puerto Rico, so people that even visit Puerto Rico can use your phone service. Thank you for reading my request

Our home line has had no dial tone for two days now. When a repair was requested, we received a commitment of 8/8. That timing was not sufficient. I updated the repair request on line indicating that we needed the repair by today. I called this morning and a recording told me that Verizon was committed to repair the phone by 8pm tonight. Well, 9:30pm and no Verizon. I tried calling with my cell phone and sat on the phone for over 30 minutes. Either no one was home or it was past business hours. In any event, here we sit with no home phone service. We are elderly. My husband has a heart condition. I am grateful for our cell phones, not Verizon. What if we had a real emergency and didn't have cell phones? This is not customer service. We never even received a phone call or an email as we requested on the repair status. So sit another day or maybe more. Frustrated in NJ. P.S. Our experience with My Verizon is it sends you round and round and round with no real solution to your problem. Any suggestions? Thanks.

Category for service category S046 does not exist

Dear Experts,
This is regarding the Bdoc error "Category for service category S046 does not exist". ECC service materials are trying to replicate from ECC to CRM. In our scenario we doesn't required ECC service material in CRM. I have not downloaded service materials relevant data. Still i am facing the above error.
Please help to fix the above error.
Regards
Ashwini

Hi,
Thanks for your reply. I have maintained the filter on service_master object is not working.
I have not downloaded the service material from ECC to CRM.Then what could be the reason for the above bdoc error.
Please help me.
Regards
Ashwini

The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.

VSS-00011: Connection to database instance <instance_name> failed.
Cause : The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.
Action : Run the Oracle VSS Writer Service in a user account that can connect to the Oracle instance with DBA privileges.
I have assigned ora_dba group to the user that runs the Oracle VSS Writer Service which is the only Oracle solution but still getting
the above error. Was advised to raise the issue here that it is an OS issue. Pls help

The user account cannot access Oracle Database instance. And also how do you temporarily disable security software on the server.
Have you checked what I already asked for? "Try using the user account and access the Database Instance.
That will let you see if the problem is with the user account permissions or not."
If this does not help then you can contact Oracle as suggested by Dave.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How do I add an app to my location services when it does not come up automatically, How do I add an app to my location services when it does not come up automatically

How do I add an app to location services when it does not appear automatically

Have you tried Settings>Privacy>Location Services and see if you can turn it on in there?
Obviously it has to be an app that works with location services so if it is and nothing else works, delete the app and download it again to make it ask again if you want to allow your location to be used with it.

Confused on FIM Service MA. It does not seem to be pulling my AD users into the correct place for the Portal

Similar Messages

Maybe you are looking for