Confusion over dbverify output result

Hello everybody,
While I am checking dbverify utility command against dmp file I get below result
$ dbv file=xxx.dmp feedback=100
DBVERIFY - Verification complete
Total Pages Examined : 845006
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 0
Total Pages Failing (Index): 0
Total Pages Processed (Other): 0
Total Pages Processed (Seg) : 0
Total Pages Failing (Seg) : 0
Total Pages Empty : 0
Total Pages Marked Corrupt : 845006
Total Pages Influx : 117
Highest block SCN : 0 (0.0)
But in the Alert log file we are not getting any block corruption error messages such as ora-01578 . So what should I do in this situation.Please advice me.
Thanx
Achyot

Achyot wrote:
Hello everybody,
While I am checking dbverify utility command against dmp file I get below result
$ dbv file=xxx.dmp feedback=100What is dmp file? It is some kind of exp dump or what?
dbverify is only for checking datafiles.

Similar Messages

Confusion over Native Query Result List

I have this confusion over the field object of a resultList of a Native query. This is because it has contradicted the idea of the books for me.
This is a pure example
@SqlResultSetMapping(name="LoanCapitalization.reportMapping",
columns={
    @ColumnResult(name="policy_number"),
    @ColumnResult(name="policy_holder"),
    @ColumnResult(name="amount"),
    @ColumnResult(name="outstanding_loan"),
    @ColumnResult(name="interest"),
    @ColumnResult(name="amount_to_date"),
    @ColumnResult(name="effective_date"),
    @ColumnResult(name="sub_system_code")
@NamedNativeQuery(name="LoanCapitalization.aggregateStatement", query="SELECT   l.policy_number, l.last_name || ' ' || l.first_name as " +
        "policy_holder, l.amount, c.out_principal_bf as outstanding_loan, c.out_interest_bf as interest, " +
        "SUM (r.repayment_amount) as amount_to_date, c.effective_date, l.sub_system_code FROM loan l JOIN v_latest_capitalization c " +
        "ON l.loan_id = c.loan_id JOIN loan_repayment r ON l.loan_id = r.loan_id WHERE " +
        "c.effective_date BETWEEN ?1 AND ?2 GROUP BY l.policy_number, l.last_name, l.first_name, l.amount, " +
        "c.out_principal_bf, c.out_interest_bf, c.effective_date, l.sub_system_code order by l.sub_system_code, l.last_name",
        resultSetMapping="LoanCapitalization.reportMapping")and
Query query = entityManager.createNamedQuery("LoanCapitalization.aggregateStatement");
        AggregateStatementLoanBalanceReportData data = null;
        List<AggregateStatementLoanBalanceReportData> returnList = new ArrayList<AggregateStatementLoanBalanceReportData>();
        query.setParameter(1, reportCriteria.getFromDate());
        query.setParameter(2, reportCriteria.getToDate());
        List<Object[]> resultList = query.getResultList();
        System.out.println("resultList.size() >>>>>>>>>> " + resultList.size());
        for (Object[] obj : resultList){
            data = new AggregateStatementLoanBalanceReportData();
            System.out.println("(String)obj[1] >>>>>>>>>> " + (String)obj[1]);
            System.out.println("(String)obj[2] >>>>>>>>>> " + (String)obj[2]);
            System.out.println("(String)obj[3] >>>>>>>>>> " + (String)obj[3]);
            System.out.println("(String)obj[4] >>>>>>>>>> " + (String)obj[4]);
            System.out.println("(String)obj[5] >>>>>>>>>> " + (String)obj[5]);
            System.out.println("(String)obj[6] >>>>>>>>>> " + (String)obj[6]);
            data.setPolicyNumber((String)obj[0]);
            data.setName((String)obj[1]);
.......My first shocking surpise is that all the System.out.println() return nulls but
System.out.println("resultList.size() >>>>>>>>>> " + resultList.size()); returned 1.
so can anyone suggest what the problem may be.
Regards,
Michael

I came across your post as I experienced the same problem. As I found no answers I tried different let's say stupid solutions.
The one that solved my problem was to write the name for the @ColumnResult in capitals as I noticed that Oracle transforms the alias column names into capitals. I guess otherwise the mapping doesn't occur correctly.
My example:
@SqlResultSetMappings({
@SqlResultSetMapping(
name = "Customers.searchCustomers",
entities =
@EntityResult(entityClass = Customers.class)
columns =
@ColumnResult(name = "CONTACTDATE"),
@ColumnResult(name = "CONTRACTDATE")
String queryString =
"SELECT c.CUSTOMER_ID, c.LAST_NAME, c.FIRST_NAME, c.OPU, c.CUSTOMER_CORE_ID, " +
"to_char(con.CONTACT_DATE, 'yyyy-dd-mm') AS CONTACTDATE, to_char(contr.CONTRACT_DATE, 'yyyy-dd-mm') AS CONTRACTDATE " +
"FROM CUSTOMERS c " +
"LEFT JOIN CONTACTS con ON con.CUSTOMER_ID = c.CUSTOMER_ID AND con.ACTIVE = '1' " +
"LEFT JOIN CONTRACTS contr ON contr.CUSTOMER_ID = c.CUSTOMER_ID AND contr.ACTIVE = '1' " +
"WHERE c.CAMPAIGN_ID = ?1 AND upper(c.LAST_NAME) LIKE ?2 AND upper(c.FIRST_NAME) LIKE ?3";
query = em.createNativeQuery(queryString,
"Customers.searchCustomers");

How to call a SP with dynamic columns and output results into a .csv file via SSIS

hi Folks, I have a challenging question here. I've created a SP called dbo.ResultsWithDynamicColumns and take one parameter of CONVERT(DATE,GETDATE()), the uniqueness of this SP is that the result does not have fixed columns as it's based on sales from previous
days. For example, Previous day, customers have purchased 20 products but today , 30 products have been purchased.
Right now, on SSMS, I am able to execute this SP when supplying a parameter. What I want to achieve here is to automate this process and send the result as a .csv file and SFTP to a server.
SFTP part is kinda easy as I can call WinSCP with proper script to handle it. How to export the result of a dynamic SP to a .CSV file?
I've tried
EXEC xp_cmdshell ' BCP " EXEC xxxx.[dbo].[ResultsWithDynamicColumns ] @dateFrom = ''2014-01-21''" queryout "c:\path\xxxx.dat" -T -c'
SSMS gives the following error as Error = [Microsoft][SQL Server Native Client 10.0]BCP host-files must contain at least one column
any ideas?
thanks
Hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hey Jakub, thanks and I did see the #temp table issue in our 2008R2. I finally figured it out in a different way... I manage to modify this dynamic SP to output results into
a physical table. This table will be dropped and recreated everytime when SP gets executed... After that, I used a SSIS pkg to output this table
to a file destination which is .csv.
The downside is that if this table structure ever gets changed, this SSIS pkg will fail or not fully reflecting the whole table. However, this won't happen often
and I can live with that at this moment.
Thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Adding field in standard SAP transaction output results.

Hi,
I have to add a new field in standard SAP transaction output results.
Can any one tell me what are the ways (brief explanation) that I can do this?
If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
Thanks for your time.
Thanks.
Chris.

Hi,
There are so many ways to find out the user exits.
Hi,
To see SAP Exits -> Use Tcode SMOD
To See create a project for Customer Exits -> Use Tcode CMOD
There are projects to which Exits are assigned. Selects the relevant projects.
What is User Exit:
http://www.sap-img.com/abap/what-is-user-exits.htm
How to find then:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
All Exits List:
http://www.easymarketplace.de/userexit.php
Do a search on SAP Exits, Customer Exits, enhancements, etc
Step 1 :- Execute transaction
step 2 :- Click on Status Menu
step 3 :- Double click on the program (screen) __?????___
Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
You can now double click on each of them to go to its position in the source code. This also
allows for the insertion of breakpoints so that you can test if the exits are called in the
appropriate place.
Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
access the actual function module it executes. This is done using the following steps:
Step 6.1 :-
Step 1
Locate desired 'Call Customer-function' statement within source code.
Step 2
If code is not within main program (module pool) e.g. SAP* then you will need to find this
out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
Step 3
The actual function module name can now be calculated based on the information retrieved,
it is defined by the following format:
EXIT_<Program name>_<Exit number>
eg :- 'EXIT_SAPLMR1M_004'.
Step 7.1:-
Once you have found the Exit function module
Step 1
Execute transaction CMOD
Step 2
Select 'SAP Enhancements' from the 'Utilities' menu.
Step 3
Select 'All selections' from the 'Edit' menu.
Step 4
Now populate the Component name field with the exit function module and press
the execute button.
Step 5
A list of all Exits(Enhancements) containing that function module should now be displayed.
Step 5
You can now double click on the desired exit to display a detailed description of its uses and a list of all
components contained in it.
Implementing Function Exit
This is required in-order to activate Function exit:
Step 1
The first step is to enter source code into function module in the usual way i.e. via SE37.
There will already be an include declaration within the code with the following
format: Include zx*.
Double click on this to create it, source code can then be entered within here.
Although it is good practice to create another include with this to store your
code, this allows separation of difference enhancements allowing them to be easlity
removed without de-activating the enhancement.
Step 2
Execute transaction CMOD and create new Enhancement. Enter name and press the create
Button.
Step 3
The following screen should be displayed, enter short text then click on the 'Enhancement
Step 4
Now enter the Exit name (enhancement) which contains the desired Function Exit.
Step 5
Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
Please Mark The Helfull Answers & close the thread.
regards
dj
reward for all useful answers.

Output results to more columns...

Hi!
I have problem, for which I didn't find solution yet.
I have query and this query returns the unknown count of rows (this row count is unknown in time of developing). I would like output results of this query to more than one result column to the screen.
Example:
I would like output results like this:
Result 1 Result 3 Result5
Result 2 Result 4
so the number of the rows is minimal!!!
It can be called real down/across!
(not like this:
Result 1
Result 2
Result 3
Result 4
Does anybody know the generic solution, how to do?
Thanks!
null

Place the data models as you want and design with additional frames
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by abcdefgh:
Hi!
I have problem, for which I didn't find solution yet.
I have query and this query returns the unknown count of rows (this row count is unknown in time of developing). I would like output results of this query to more than one result column to the screen.
Example:
I would like output results like this:
Result 1 Result 3 Result5
Result 2 Result 4
so the number of the rows is minimal!!!
It can be called real down/across!
(not like this:
Result 1
Result 2
Result 3
Result 4
Does anybody know the generic solution, how to do?
Thanks!<HR></BLOCKQUOTE>
null

Still confused over fup changes to Total BB option...

There still seems to be confusion over the planned changes for Total BB Option 1 customers.
Although KerryG has informed us that the monthly allowance will remain at 10Gb and the charge for additional use will be changing to £5 per 5Gb, BT customer services seem to think the extra usage charge remains the same as it is now.
Please see posts from KerryG and bobm here -
http://community.bt.com/t5/BB-in-Home/WHERE-IS-OUR-USAGE-MONITOR-BT/m-p/41085#M24680
Does anyone have any further info please ?

Hi Del
I can confirm that the info I provided on the earlier thread was correct. I am sorry if people have received other information when calling in. I have fed this back to the relevant teams to make sure all advisors are aware of these recent changes.
To clarify, the position for BT Total Broadband Option 1 is:
Usage allowance – will remain at 10GB
Additional usage charges – they will be charged at 5GB for £5 (rather than 1GB for £1) as from November 1st 2010.
As mentioned before, there are a couple of links that may be useful for those who think they may be likely to incur additional usage charges and wish to review which broadband option is best for them:
Details of usage allowances for each option
Details of options for upgrading your broadband package
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

WMI - Output result

Hi
Am trying to fetch information from my client computers, that they have installed Skye or not on there computers.
I was able to write a WMI script, works well, but the output result is written on cmd.
How can i get the output result to excel or notepad..
Please help me with the output script code.
Here is my code
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2")
Set colItems = objWMIService.ExecQuery( _
"SELECT * FROM Win32_Service where displayname like 'Skype%' ",,48)
For Each objItem in colItems
Wscript.Echo "Name: " & objItem.displayName
Next
Thanks
Venky

Hi
Iam trying to fetch information from my client computers, that they have installed Skye on there computers.
I was able to write a WMI script, works well, but the output result is written on cmd.
How can i get the output result to excel or notepad..
Please help me with the output script code.
Here is my code
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2")
Set colItems = objWMIService.ExecQuery( _
"SELECT * FROM Win32_Service where displayname like 'Skype%' ",,48)
For Each objItem in colItems
Wscript.Echo "Name: " & objItem.displayName
Next
Thanks
Venky

Outputting Results in a single row from a Table

Afternoon folks,
I have a scenario in hand and I was hoping to get some pointers. I could write a PL/SQL program and all would be fine. I was hoping if there was a way to do it in SQL and not have to create a whole new sub-program for this. I already have a PL/SQL program that populates a table. I want to use that data now and output it in a certain manner.
Any help is greatly appreciated and this is not something I need to solve by tonight. :)
Script to create table and insert records into it:
drop table FLIGHT_ROUTES;
CREATE TABLE FLIGHT_ROUTES
   (FLIGHT_NO           VARCHAR2(7),
    ROUTE_ID            NUMBER,
    DAY_OF_OPERATION    NUMBER,
    ORIGIN              VARCHAR2(3),
    DESTINATION         VARCHAR2(3),
    STOPVER             VARCHAR2(3),
    ROUTE_TYPE          VARCHAR2(1)
REM INSERTING into FLIGHT_ROUTES
Insert into FLIGHT_ROUTES (FLIGHT_NO,ROUTE_ID,DAY_OF_OPERATION,ORIGIN,DESTINATION,STOPVER,ROUTE_TYPE) values ('UX-1001',1,1,'SFO','LAX',null,'D');
Insert into FLIGHT_ROUTES (FLIGHT_NO,ROUTE_ID,DAY_OF_OPERATION,ORIGIN,DESTINATION,STOPVER,ROUTE_TYPE) values ('UX-1001',1,2,'SFO','LAX',null,'R'); -- Record 2
Insert into FLIGHT_ROUTES (FLIGHT_NO,ROUTE_ID,DAY_OF_OPERATION,ORIGIN,DESTINATION,STOPVER,ROUTE_TYPE) values ('UX-2001',2,1,'SFO','JFK',null,'D');
Insert into FLIGHT_ROUTES (FLIGHT_NO,ROUTE_ID,DAY_OF_OPERATION,ORIGIN,DESTINATION,STOPVER,ROUTE_TYPE) values ('UX-2001',2,2,'SFO','JFK','ORD','D');
Insert into FLIGHT_ROUTES (FLIGHT_NO,ROUTE_ID,DAY_OF_OPERATION,ORIGIN,DESTINATION,STOPVER,ROUTE_TYPE) values ('UX-2001',2,3,'SFO','JFK','DEN','R'); -- Record 5
Insert into FLIGHT_ROUTES (FLIGHT_NO,ROUTE_ID,DAY_OF_OPERATION,ORIGIN,DESTINATION,STOPVER,ROUTE_TYPE) values ('UX-3001',3,1,'LAX','JFK','YYZ','D');
Insert into FLIGHT_ROUTES (FLIGHT_NO,ROUTE_ID,DAY_OF_OPERATION,ORIGIN,DESTINATION,STOPVER,ROUTE_TYPE) values ('UX-3001',3,2,'LAX','JFK','YYC','D');
Insert into FLIGHT_ROUTES (FLIGHT_NO,ROUTE_ID,DAY_OF_OPERATION,ORIGIN,DESTINATION,STOPVER,ROUTE_TYPE) values ('UX-3001',3,3,'LAX','JFK','YUL','D');What I would like to do is output the results by Flight Number, Origin1, Destination1, Origin2, Destination 2 and Origin 3, Destination 3. The maxium number combinations per Flight is 3. The other condition is that the listing should only show the Origin and Destinations and Stopover if it's a Day time Flight. If its a Red Eye, then don't show that option. So, Record 2 would be completely omitted here as it's a Red Eye flight and Record 5 would be omitted for Origin/Destination/Stopover 3 for flight UX-2001.
Flight_No       Origin1     Destination1    Stopover 1      Origin2          Destination2      Stopver2      Origin3    Destination3     Stopover3
============================================================================================================================================================
UX-1001         SFO         LAX
UX-2001         SFO         JFK                             SFO              JFK               ORD
UX-3001         LAX         JFK             YYZ             LAX              JFK               YYC           LAX        JFK              YULEdited by: Roxyrollers on Sep 9, 2011 3:59 PM
Edited by: Roxyrollers on Sep 9, 2011 3:59 PM
Edited by: Roxyrollers on Sep 9, 2011 4:00 PM

Hi,
Assuming that day_of_operation is what determines whether a row is 1, 2 or 3:
WITH     got_r_num     AS
     SELECT     f.*
     ,     ROW_NUMBER () OVER ( PARTITION BY flight_no
                               ORDER BY         day_of_operation
                       ) AS r_num
     FROM    flight_routes        f
     WHERE     route_type     != 'R'
SELECT       flight_no                              || ',' ||
       MAX (CASE WHEN r_num = 1 THEN origin      END)     || ',' ||     -- Origin 1
       MAX (CASE WHEN r_num = 1 THEN destination END)     || ',' ||     -- Destination 1
       MAX (CASE WHEN r_num = 1 THEN stopver     END)     || ',' ||     -- Stopover 1
       MAX (CASE WHEN r_num = 2 THEN origin      END)     || ',' ||     -- Origin 2
       MAX (CASE WHEN r_num = 2 THEN destination END)     || ',' ||     -- Destination 2
       MAX (CASE WHEN r_num = 2 THEN stopver     END)     || ',' ||     -- Stopover 2
       MAX (CASE WHEN r_num = 3 THEN origin      END)     || ',' ||     -- Origin 3
       MAX (CASE WHEN r_num = 3 THEN destination END)     || ',' ||     -- Destination 3
       MAX (CASE WHEN r_num = 3 THEN stopver     END) AS csv_text           -- Stopover 3
FROM       got_r_num
GROUP BY flight_no
ORDER BY flight_no
;Output:
CSV_TEXT
UX-1001,SFO,LAX,,,,,,,
UX-2001,SFO,JFK,,SFO,JFK,ORD,,,
UX-3001,LAX,JFK,YYZ,LAX,JFK,YYC,LAX,JFK,YULThis does not assume that origin1 is always on the same row with day_of_operation=1. Origin1 will be from the row with the lowest day_of_operation, not counting red-eyes. Likewise, origin2 will be from the row with the 2nd lowest day_of_operation, whether that value is 2 or not.
If your data is such that the row with day_of_operation=n will necessarily be the nth lowest one, not counting red-eyes, then you don't need the sub-query got_r_num; just use your real table (with the condition WHERE route_type != 'R'), and use day_of_operation where I used r_num. (This is what Solomon's solution, which I just saw, does.)
Edited by: Frank Kulash on Sep 9, 2011 4:47 PM
Edited by: Frank Kulash on Sep 9, 2011 4:53 PM

Scanning .txt file and outputting results?

Greetings Everyone. My employer has charged me with a rather
confusing task. Basically I need to scan a .txt file and retrieve
some information from it. Here is a little background on the file
itself.
This is a feed file containing the information for employees
such as name, department, employement status etc...Zeros are used
in place of spaces in this file. What I am charged with is
retrieving the employment status and name for every single person
in the file (60,000+).
I need to write a coldfusion script that can do the
following.
1. Scan a .txt file that is sent to me every night and look
for the 99th character on each line of the .txt file
2. If the 99th character is a 'T' I need to pull characters
'10-50' (which contain the name for that person).
3. Output the results of the scan to a coldfusion page
displaying the individuals' names.
If anyone out there can point me in the right direction I
would be very grateful. I've been looking for websites on this
topic but I have been unsucessful so far. Should I post this in the
advanced section of the cf forums? Once again, thank you for any
help you can give me.

I guarantee you can do this! And it shouldnt be to hard so
you can breath a sigh of relief... :)
I would use <cffile action="read" file="filepath/name.txt"
variable="fileContents">
Then you should be able to do something like <cfset
fileArray = ListToArray(fileContents, "#CHR(13)##CHR(10)#")>
Now you have an array so you can loop through and try
something like the following...
<cfloop index="i" from="1" to="#ArrayLen(fileArray)#"
step="1">
<cfif fileArray
NEQ "">

<cfset 99thchar = Mid(fileArray, 99, 1)>
<cfif 99thchar EQ "T">

<cfset empName = Mid(fileArray
, 10, 40)>

<cfset empName = Replace(empName, "0", "#CHR(32)#")>
<cfoutput>#empName#</cfoutput><br />
</cfif>
</cfif>
</cfloop>
That should be close to what you could use... You may have to
tweak it a bit... now if it is going though 60000+ records this may
take a while...lol You might have to use the cfsetting tag to
extend the normal request timeout..
Hope this helps!

Please assist with modifying this script to read in a list of servers and output results to excel

Hello,
I have an excellent script written by Brian Wilhite to gather the last logged in user using Powershell.
http://gallery.technet.microsoft.com/scriptcenter/Get-LastLogon-Determining-283f98ae/view/Discussions#content
My Powershell Fu is stumbling to modify this script to the following requirements:
Currently the script must be loaded first into Powershell, then it can be executed. I would rather edit the script in my Powershell ISE, add the .txt file to the script itself that gives a list of the servers I need to scan. Then when I
press Run Script in my ISE it executes.
I would also like to output the results of the file to excel (.xls or .csv will do). Currently the results look as follows:
Computer : SVR01
User : WILHITE\BRIAN
SID : S-1-5-21-012345678-0123456789-012345678-012345
Time : 9/20/2012 1:07:58 PM
CurrentlyLoggedOn : False
I would prefer it shows up like so:
Computer User SID Time Currently LoggedOn
SVR01 WILHITE\BRIAN S-1xxx 9/20/2012 1:07:58 PM FalseSRV02 WILHITE\BRIAN S-2xxx 9/26/2014 10:00:00 AM True
Any help you can provide would be greatly appreciated. I'll add the full script to the end of this post.
Thank you.
Function Get-LastLogon
<#
.SYNOPSIS
This function will list the last user logged on or logged in.
.DESCRIPTION
This function will list the last user logged on or logged in. It will detect if the user is currently logged on
via WMI or the Registry, depending on what version of Windows is running on the target. There is some "guess" work
to determine what Domain the user truly belongs to if run against Vista NON SP1 and below, since the function
is using the profile name initially to detect the user name. It then compares the profile name and the Security
Entries (ACE-SDDL) to see if they are equal to determine Domain and if the profile is loaded via the Registry.
.PARAMETER ComputerName
A single Computer or an array of computer names. The default is localhost ($env:COMPUTERNAME).
.PARAMETER FilterSID
Filters a single SID from the results. For use if there is a service account commonly used.
.PARAMETER WQLFilter
Default WQLFilter defined for the Win32_UserProfile query, it is best to leave this alone, unless you know what
you are doing.
Default Value = "NOT SID = 'S-1-5-18' AND NOT SID = 'S-1-5-19' AND NOT SID = 'S-1-5-20'"
.EXAMPLE
$Servers = Get-Content "C:\ServerList.txt"
Get-LastLogon -ComputerName $Servers
This example will return the last logon information from all the servers in the C:\ServerList.txt file.
Computer : SVR01
User : WILHITE\BRIAN
SID : S-1-5-21-012345678-0123456789-012345678-012345
Time : 9/20/2012 1:07:58 PM
CurrentlyLoggedOn : False
Computer : SVR02
User : WILIHTE\BRIAN
SID : S-1-5-21-012345678-0123456789-012345678-012345
Time : 9/20/2012 12:46:48 PM
CurrentlyLoggedOn : True
.EXAMPLE
Get-LastLogon -ComputerName svr01, svr02 -FilterSID S-1-5-21-012345678-0123456789-012345678-012345
This example will return the last logon information from all the servers in the C:\ServerList.txt file.
Computer : SVR01
User : WILHITE\ADMIN
SID : S-1-5-21-012345678-0123456789-012345678-543210
Time : 9/20/2012 1:07:58 PM
CurrentlyLoggedOn : False
Computer : SVR02
User : WILIHTE\ADMIN
SID : S-1-5-21-012345678-0123456789-012345678-543210
Time : 9/20/2012 12:46:48 PM
CurrentlyLoggedOn : True
.LINK
http://msdn.microsoft.com/en-us/library/windows/desktop/ee886409(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/system.security.principal.securityidentifier.aspx
.NOTES
Author: Brian C. Wilhite
Email: [email protected]
Date: "09/20/2012"
Updates: Added FilterSID Parameter
Cleaned Up Code, defined fewer variables when creating PSObjects
ToDo: Clean up the UserSID Translation, to continue even if the SID is local
#>
[CmdletBinding()]
param(
[Parameter(Position=0,ValueFromPipeline=$true)]
[Alias("CN","Computer")]
[String[]]$ComputerName="$env:COMPUTERNAME",
[String]$FilterSID,
[String]$WQLFilter="NOT SID = 'S-1-5-18' AND NOT SID = 'S-1-5-19' AND NOT SID = 'S-1-5-20'"
Begin
#Adjusting ErrorActionPreference to stop on all errors
$TempErrAct = $ErrorActionPreference
$ErrorActionPreference = "Stop"
#Exclude Local System, Local Service & Network Service
}#End Begin Script Block
Process
Foreach ($Computer in $ComputerName)
$Computer = $Computer.ToUpper().Trim()
Try
#Querying Windows version to determine how to proceed.
$Win32OS = Get-WmiObject -Class Win32_OperatingSystem -ComputerName $Computer
$Build = $Win32OS.BuildNumber
#Win32_UserProfile exist on Windows Vista and above
If ($Build -ge 6001)
If ($FilterSID)
$WQLFilter = $WQLFilter + " AND NOT SID = `'$FilterSID`'"
}#End If ($FilterSID)
$Win32User = Get-WmiObject -Class Win32_UserProfile -Filter $WQLFilter -ComputerName $Computer
$LastUser = $Win32User | Sort-Object -Property LastUseTime -Descending | Select-Object -First 1
$Loaded = $LastUser.Loaded
$Script:Time = ([WMI]'').ConvertToDateTime($LastUser.LastUseTime)
#Convert SID to Account for friendly display
$Script:UserSID = New-Object System.Security.Principal.SecurityIdentifier($LastUser.SID)
$User = $Script:UserSID.Translate([System.Security.Principal.NTAccount])
}#End If ($Build -ge 6001)
If ($Build -le 6000)
If ($Build -eq 2195)
$SysDrv = $Win32OS.SystemDirectory.ToCharArray()[0] + ":"
}#End If ($Build -eq 2195)
Else
$SysDrv = $Win32OS.SystemDrive
}#End Else
$SysDrv = $SysDrv.Replace(":","$")
$Script:ProfLoc = "\\$Computer\$SysDrv\Documents and Settings"
$Profiles = Get-ChildItem -Path $Script:ProfLoc
$Script:NTUserDatLog = $Profiles | ForEach-Object -Process {$_.GetFiles("ntuser.dat.LOG")}
#Function to grab last profile data, used for allowing -FilterSID to function properly.
function GetLastProfData ($InstanceNumber)
$Script:LastProf = ($Script:NTUserDatLog | Sort-Object -Property LastWriteTime -Descending)[$InstanceNumber]
$Script:UserName = $Script:LastProf.DirectoryName.Replace("$Script:ProfLoc","").Trim("\").ToUpper()
$Script:Time = $Script:LastProf.LastAccessTime
#Getting the SID of the user from the file ACE to compare
$Script:Sddl = $Script:LastProf.GetAccessControl().Sddl
$Script:Sddl = $Script:Sddl.split("(") | Select-String -Pattern "[0-9]\)$" | Select-Object -First 1
#Formatting SID, assuming the 6th entry will be the users SID.
$Script:Sddl = $Script:Sddl.ToString().Split(";")[5].Trim(")")
#Convert Account to SID to detect if profile is loaded via the remote registry
$Script:TranSID = New-Object System.Security.Principal.NTAccount($Script:UserName)
$Script:UserSID = $Script:TranSID.Translate([System.Security.Principal.SecurityIdentifier])
}#End function GetLastProfData
GetLastProfData -InstanceNumber 0
#If the FilterSID equals the UserSID, rerun GetLastProfData and select the next instance
If ($Script:UserSID -eq $FilterSID)
GetLastProfData -InstanceNumber 1
}#End If ($Script:UserSID -eq $FilterSID)
#If the detected SID via Sddl matches the UserSID, then connect to the registry to detect currently loggedon.
If ($Script:Sddl -eq $Script:UserSID)
$Reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey([Microsoft.Win32.RegistryHive]"Users",$Computer)
$Loaded = $Reg.GetSubKeyNames() -contains $Script:UserSID.Value
#Convert SID to Account for friendly display
$Script:UserSID = New-Object System.Security.Principal.SecurityIdentifier($Script:UserSID)
$User = $Script:UserSID.Translate([System.Security.Principal.NTAccount])
}#End If ($Script:Sddl -eq $Script:UserSID)
Else
$User = $Script:UserName
$Loaded = "Unknown"
}#End Else
}#End If ($Build -le 6000)
#Creating Custom PSObject For Output
New-Object -TypeName PSObject -Property @{
Computer=$Computer
User=$User
SID=$Script:UserSID
Time=$Script:Time
CurrentlyLoggedOn=$Loaded
} | Select-Object Computer, User, SID, Time, CurrentlyLoggedOn
}#End Try
Catch
If ($_.Exception.Message -Like "*Some or all identity references could not be translated*")
Write-Warning "Unable to Translate $Script:UserSID, try filtering the SID `nby using the -FilterSID parameter."
Write-Warning "It may be that $Script:UserSID is local to $Computer, Unable to translate remote SID"
Else
Write-Warning $_
}#End Catch
}#End Foreach ($Computer in $ComputerName)
}#End Process
End
#Resetting ErrorActionPref
$ErrorActionPreference = $TempErrAct
}#End End
}# End Function Get-LastLogon

This should work:
Get-LastLogon -Computername (Get-content .\Servers.txt) | Export-CSV .\Output.csv -NoTypeInformation
I just tested it on my test domain and it did the trick.

Premier Elements 7 - confusion over mixing video formats

Hi
I have been using a DV camcorder (SD quality) for some time, originally recording in 4:3 format, and more recently in 16:9 format (as we bought a wide screen telly).
I have just treated myself to a new AVCHD Panasonic video recorder recording High Definition footage in 1080 16:9 PAL format onto an SD memory card.
I wanted to take all this footage and put it on my computer to edit it together and start making some films to keep for the future - on DVD for now, and at some point on Blue Ray. To this end I have just purchased Adobe Premier Element 7.0, with Photoshop Elements 7.0 bundled together.
My confusion is that it appears I can only use one format in a "project" as I need to define the parameters for the "project" in terms of SD vs HD and 4:3 vs 16:9. I was hoping to be able to store all of my footage of various quality definitions and screen ratils into a "library" (which I see is called "Organiser" in Adobe terms) on the hard disk, and then pick and choose from the "library" what to put into each "film project" as I make them, mixing formats as I wish. I realise that in this way, the output would itself switch from 3:4 to 16:9 etc on accasions as I switch scene to use a different format, and so may not appear to be the smoothest edit.... but I thought that would be my decision to do if I wanted it. Instead it appears I cannot mix a few minutes if 4:3 SD footage of my son as a baby, with more recent 16:9 1080 HD footage of him as a boy - which is a real shame as it is what I wanted to do....
Have I misunderstood, or am I right in thinking I am limited in this way?
Why can I mix still photos of any format with video , but not mix different formats of PAL video?
Many thanks

Thanks Paul
I have been having go, as you suggest, and as you said, I cannot edit my AVCHD footage in Scene mode as it has 5.1 audio (which I cannot change on the videocam) This is very disappointing as I really wanted the simplicity of the scene editing rather than timeline.... This is compounded by the fact that timeline editing seems even more complicated than normal as each new AVCHD clip I add is placed onto a different video track (not all on track 4 as you thought)- so it is real mess to work out on my screen.... Is this a bug, the way PRE treats 5.1 tracks - or is it just oversight and poor design? Do you think it might be addressed by Adobe?
Anyhow, thanks for explaining what is going on, as without your warning, I would have assumed that the PRE 7 sceneline feature was broken - you would have thought there would be some warning / documentation from Adobe about this, as effectively, a big feature is now unavailable to me as an AVCHD user - and the product claims to be compatible with AVCHD!
Would you be able to advise on a couple more of my "newbie" file format questions?
How do the settings work between setting the initial PROJECT format, and then choosing the various OUTPUT (sharing) settings. For example, if I want to edit a project using AVCHD clips only, and output it to DVD quality to watch on a PC or burn to DVD disk, do I get the same thing if I set the project setting to PAL AVCHD High Def 1080 5.1 and then the share setting to DVD quality output, as I would if I set the project settings to DV 48hz and the share setting to DVD quality output?
My ideal would be to retain the High Definition of the footage through the editing process and then be able to output to DVD quality now, but to be able to come back to the finished edited project in the future and choose to output it to Blueray when I have upgraded my TV and bought a blueray player. i.e. I am trying to make my filming and edited projects a bit futureproof....
Finally, I am just not up enough on all the different format lingos (Mpeg1, MPeg2, H.116 etc) to know what I should be choosing from the list for:
1) outputting edited footage to burn onto a DVD to be used on a DVD player
2) outputting edited footage to save onto a PC to view in the best possible quality on a PC
Do you know?
Many thanks

Iterate over some output text in a panel Grid

Hello folks
Are any of you doing something like this in JSC
<code>
<%
for (int i = 0; i<4; i++)
%>
<h:panelGrid bgcolor="gray" binding="#{Page1.gridPanel1}" id="gridPanel1" style="height: 73px; left: 0px; top: 120px; position: absolute" width="216">
<h:outputText binding="#{Page1.outputText1}" id="outputText1" value="Author"/>
<h:outputText binding="#{Page1.outputText2}" id="outputText2" value="Summary"/>
<h:outputText binding="#{Page1.outputText3}" id="outputText3" value="Article link"/>
</h:panelGrid>
<%
%>
</code>
What I'm trying to do is something like data table, except that I want to have control over where the output text goes, and how it is presented.
In data table all I get is a predefined table (I�m unable to format it the way I would like) so lets do it the old way - link some output text to a database or maybe an array which holds the "data" then loop over it x number of times to display the content kind of like this
For (less than x times) do
Author name
Date article written
Summary article
Link to more of the article
This would be the way I used to this, now I�m curios how this is done using JSF
<% loop here %> does not mix well in Creator, error not well formed
I�m unable to format a data table in any respect except number of rows and stuff
So Any suggestion on how to really do this effectively in JSC/JSF
Thanks Bjorn

Hi,
Actually, you have quite a bit of flexibility with the Data Table component.
You can add more than one component to a column,
and you can use an outputText component to hold
HTML formatting tags, such as <br>.
Note: you must uncheck the escape attribute.
And since the data table component produces an HTML <table> tag,
you can also control style with additional style sheet classes (see Tor's blog).
For an example of using the Data Table component
to display the resuts of the Google search web services,
See Beyond the Book at this URL:
http://www.asgteach.com/download/beyond.pdf
The relevant description is section A.5 beginning on page 24.
Hope this helps.
--Gail A.

Confusion over nested tables and system generated nested tables

Hi,
I have been reading other threads about nested tables, naming and updating them etc, but I have what seems
to me some odd behaviour.
I modified my schema to set the attribute xdb:maintainDom to be false for a collection and then registered
the schema with the generate tables option defaulted to true. The result was that I had to add xdb:tableProps
attributes specifying nested table storage at each element above the collection element, this was because Oracle
was creating tables at each level. So I have this kind of thing:
<xsd:element name="BibPt" xdb:SQLType="BIBPT_T"
xdb:defaultTable="BIBPT"
xdb:tableProps="NESTED TABLE XMLDATA.PTEES.PTEE_SEC.PTEE STORE AS NESTED_PTEE_SEC
NESTED TABLE XMLDATA.INVS.INV STORE AS NESTED_INV_BIBPT TABLESPACE BIBLIO">
<xsd:element name="Ptees" xdb:SQLType="PTEES_T" xdb:tableProps="NESTED TABLE
XMLDATA.PTEE_SEC.PTEE STORE AS NESTED_PTEE_SEC2">When I did this the nested tables were created, but when I loaded data never had anything in them. Instead
I found that nestes tables with systems generated names like "SYSNTxxxxxxxxx" has been created that contained
the data.
When I registered the schema without the tables being generated, I created a table with this syntax:
create table poc_wip2 of xmltype
xmlschema "http://www.derwent.co.uk/wpi.xsd" element "WPI"
NESTED TABLE XMLDATA."BibPt".PTEES.PTEE_SEC.PTEE STORE AS NESTED_PTEE_SEC
NESTED TABLE XMLDATA."BibPt".INVS.INV STORE AS NESTED_INV_BIBPT(Thanks to a posting by Sam Monsarrat which showed me this was possible).
Now I had my named nested tables, which contained the data after it was loaded and no system named
nested tables.
So why the difference?
In the first instance why do my named nested tables stay empty and why does the data go into system
generated tables I have no control over as regards tablespace placement?
Is it possible to have a XML schema registered that only generates tables that I have named with the defaultTable
attribute, rather than all or nothing?
And last but not least, what's the best approach for this, since I want to be able to access the data via indexes
on the nested tables.
Thanks
Pete

Hi Pete
Would you please publish the schema you are using?
Thanks,
Tobias

Trying to update from OS X 10.6.8 operating with zero problems to 10.9.2. Install over current OS results in inability to cold boot to mavericks. Must use option key to select 10.9.2 volume to boot to.

Will boot from cold start sometimes but eventually will not boot at all. Just white screen. Have tried safe boot and cleaning out folders suggested by Apple care advisor. This helps temporarily. But white screen issue returns. Have removed all periferals problem persists. Have tried reseting Pram. This results in the Mac booting up into 10.6.8. ( I keep a backup clone on a different internal physical drive.) I've tried a clean install using migration assistant to bring over all my stuff. This results in a permissions mess that disk utility cannot fix.) I've tried migrating my data from snow leopard during the install process. Same permissions mess. Snow leopard works great but I'm concerned about lack of support with security updates going forward. I have three macs in the family. Have been a mac user since 2002. Paid the premium because Macs just WORK and I've not had to mess with them to stay alive. Mavericks has changed all that. I want to get past this and go back to just using my Mac. Open to help please. Two other things. In all instances of trying to use Mavericks I cannot get finder to retain my preference settings. They always return to default when I reboot. Microsoft Entourage always opens with a new email draft now instead of just opening to the inbox like under Snow Leopard when started from the dock. When started from applications Entourage opens to the inbox normally. Thanks

Here is how I solved this issue on my early 2008 Mac Pro- Formatted and zeroed my boot drive. Disconnected all periferals except monitor (Dell DVI), wired mac keyboard, Logitech wireless usb 2 mouse. Removed my ATI 5770 upgrade Video card and replaced with original Nvidia card. Did clean 10.9 install. Immediately updated to 10.9.2. Checked finder preference retention issues- Gone. Checked reboot and boot after PRAM reset issue. Still boots back to 10.6.8. Hmmmm though about how the order of my physical drives in the bays was now different than before 10.9. Previously 10.6 startup was in bay 3 and my 10.6 clones were in bay 4. Never had a clone boot on startup. Now 10.6 is in bay 2 and 10.9 is in bay 3. Does the mac start looking for a boot volume in bay 1 then 2,3,4. Answer- Yes! When I moved the 10.9 drive to bay 1 kept 10.6 in bay 2 the crazy start up switch no longer occurs. So, I used the system like that for a couple of days rebuilding my files and reinstalling applications. Then I pulled the nVidia card and put the ATi 5770 back in. All is well. The system works perfectly no more issues. This has been a lot of work and I can't tell what the specifict conflict was, but I'm up and running Mavericks with no problems. All my hardware is back as it was before. All periferals working fine. Glad I am still able to make use of my ATi video card because it is superior. Hope this helps others use mavericks on their older Macs.

How to output results to a file?

If there is no Debug capability, how to output test results to a file? Are there any other ways to do this?
Thanks!

Dear Sapport,
You can use the IWDMessageManger to print the message on the webdynpro application iview screen.
Please refer to the more details for the Webdynpro Logging and Tracing to find the root cause:-
[Logging in Web Dynpro (Java) - a guide and tutorial for beginners [Part 1]|Logging in Web Dynpro (Java) - a guide and tutorial for beginners [Part 1]]
[http://wiki.sdn.sap.com/wiki/display/WDJava/LoggingandTracinginWebDynpro|http://wiki.sdn.sap.com/wiki/display/WDJava/LoggingandTracinginWebDynpro]
Hope it will resolve your issue.
Best Regards
Arun Jaiswal
Edited by: Arun Jaiswal on Mar 5, 2012 12:47 PM

Confusion over dbverify output result

Similar Messages

Maybe you are looking for