Connect Selected End Point Question

Hi everyone:
I am trying to connect selected end points. I have drawn my open path and Illustrator is not letting me select my two anchor points. I keep getting selections of the entire path. So, of course, the connect selected end points icon is greyed out. I have tried selecting the two endpoints with the lasso and variations of the direct select and select and they all select parts of or the entire path. Does anyone know how to isolate the selection to just the two end points? Thanks so much for your help!

ALWAYS state WHAT VERSION you are using. No fewer than six different versions of Illustrator are discussed here, and functionality changes between versions.
function(){return A.apply(null,[this].concat($A(arguments)))}
I am trying to connect selected end points. I have drawn my open path and Illustrator is not letting me select my two anchor points. I keep getting selections of the entire path.
(Emphasis mine.)
The way you stated this suggests you are trying to close a single open path, not join two open paths. If so, selecting the entire path is what you want. With the whole path selected, key Ctrl-J. The Join command also closes an open path.
JET

Similar Messages

Web service end point question?

Hello,
I m using netbeans6 JCAPS enabled. I have a wsdl that has an endpoint like this;
http://abc.com?wsdl
We created a web service from this wsdl. We named our service like testwebservice. When our class created we check the endpoint and saw that it changed to;
http://abc.com/testwebservice?wsdl
It added our class name to the endpoint. Is there a way to get rid of this additional name??? We want to keep this endpoint original.(http://abc.com?wsdl)
any help would be great.

Hi Eric,
I can ping the ip of the WLS server, where webservice is deployed on Admin server (port 7001) and osb server (port 8011).
I can access the webservice from Admin server in the browser ie.
http://ip:7001/WebServiceContext/WebService_ep
whereas Im unable to access from osb server port in the browser:
http://ip:8011/WebServiceContext/WebService_ep
I can able to open OSB console in my browser which means 8011 port is open
http://ip:8011/sbconsole
Is there any configuration missing in OSB server?
Thanks

Issue with variable while in a PSSession connected to an end point

Ok so Ive put together a simple script that will allow our helpdesk to look at permissions on a specified folder or share adn display in a nice html page. I need it to run under different credentials so I set up an endpoint which I can connect to remotely
and run the script. The issue is in the variable that needs to get set. It prompts for the folder location and once you put it in, it just freezes up. If I run the script locally its fine and works perfectly. but running it in the remote
session connected to an end point, it just doesnt do anything once you put in the information after it prompts you. For testing also I set the $folderpath to a specific path and it does run fine through a remote session so its just an issue passing
that input back to the variable while in the remote session. Any idea?
$a = "<style>"
$a = $a + "BODY{background-color:peachpuff;}"
$a = $a + "TABLE{border-width: 0px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TD{border-width: 3px;padding: 5px;border-style: solid;border-color: black;background-color:PaleGoldenrod}"
$a = $a + "</style>"
$folderpath = Read-Host -Prompt "Enter full folder path here"
$cname ="Permissions for $folderpath : "
Get-Acl $folderpath | select access -ExpandProperty access| select identityReference | ConvertTo-HTML -head $a -body "<H2>$CNAME</H2>" | Out-File \\server\PermReports\perms.html

Here's some napkin code, FWIW
On the user side:
$Session = New-PSSession -ComputerName remoteservername -ConfigurationName checkperms
$ADIdentityReference =
#Coax an AD identity reference out of the button monkey
Invoke-Command -ScriptBlock { .\PermissionsScript.ps1 } -Session $session -Argumentlist $ADIdentityReference |
ForEach-Object {
#Ask for more input, or quit
Remove-PSSession $Session
and on the remote end:
Param ($IdentityReference)
Try {
Get-ADSomething -Identity $IdentityReference -EA Stop |
foreach-object {
Do-SomeStuff
Catch {
#Return validation fail message
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Show not selected anchor points (and connect)

Hello.
Every now and then I have the problem in Illustrator that I want to connect two anchor points with the pen tool. The two anchor points belong to different objects. Is there any way to always show all anchor points. Today I have to select one of the object to see the first anchor point I want to connect. And then hovering the point over the plaece where I presume the second anchor point is located until the mouse icon indicates that I have the pointer at an anchor point.
A second question: Is there any way to connect more than two “lines” to an anchor point? I.e intersect and connect an anchorpoint in the middle of a line with a third anchor point.

Almost.
My thought was that if I could see all anchorpoints of all objects, without selecting the objects. Ie. se all "white" anchor points, when I select them they will become "filled/blue".

WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point

I am getting the following error message while trying to configure a database for a Reporting Service Server. Both SQL Server and Reporting server are 2012 named instances. I have 2014 instances as well on the same server.
Exception details...
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
   at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
Can someone help me on this please?

Hi Jaigi,
According to your description, you want to change a report server database for Reporting Services. But it fails on the last step and returns a error. Right?
In this scenario, it seems you are creating a report server database on another server via remote connection. Based on the error message, it has issues on executing the script for generating new database. Please check if you have permission to connect the
server and create a new database. Also please check if the Reporting Services Windows services is working properly.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Getting the end point to end point connections paths that exist from Switch Exe

Can I query the Switch Exe data base and get a list of the existing paths that Switch EXE has connected?
I have a debug app that reads the channel names (via a property node) and present them to the operator to manually connect and disconnect paths using the end points. I would like to have an indicator showing the current paths that are connected and I was hoping to be able to get that from Switch Exe without me having to add code to keep track of it myself.
The goal is to be able to click on any existing path to disconnect it.
I do query the switch cards and display the actual relays that are closed, but that is hard to relate that to what channels that are connected when we have 8 matrix cards all interconnected.
Thanks
Omar
Omar

Hi Omar,
Try using something like the example below that incorporates an array to check every connection. If the path is found to exist, then you could add that combination to an array that is displayed on the front panel. Also see this knowledge base article about the known issue with the Find Routes VI. Use the VI from the bottom of the page in place of the Find Routes from the palette. Hopefully this helps!
Regards,
h_baker
National Instruments
Applications Engineer
Digital Multimeter Resources

Support for TLS-DSK Authentication in UCMA End Point connections?

The Lync servers support NTLM, Kerberos, TLS-DSK as supported Authentication Protocols.
However, it appears that UCMA API when used in the End Point connection mode does not provide an option to use TLS-DSK as an authentication scheme. Is there any way to connect to a Lync server that only supports TLS-DSK as an authentication protocol?
//etc
_collabPlatform = new CollaborationPlatform(clientPlatformSettings);
_collabPlatform.AllowedAuthenticationProtocol = SipAuthenticationProtocols.None; //Authentication protocol limitation -- TLS-DSK not available.
UCFin

No, UCMA only supports NTLM/Kerberos. TLS-DSK requires HTTP requests which UCMA can not currently handle.

Airport Express as an end point on a wireless network and connect a computer via the ethernet port?

Can I use my Airport Express as an end point on a wireless network and connect a computer via the ethernet port? - I'm wanting to connect a computer that does not have wireless and is in another building.

The requirements for this to work are:
1) The AirPort Express must be the 802.11"n" version. Model Number is A1264
2) There must be adequate wireless signal stength where the Express will be located
3) The Express must be configured to "join" the wireless network with the option checked to activate the Ethernet port

Systinet UDDI - SOA SUITE 11G (Dynamic SOAP end point lookup Issues)

Hi,
We are using Systinet as our UDDI product and trying to use UDDI lookup in our BPEL process as well. I have completed the below tasks
1) Configured the Systinet UDDI Inquiry URL and the development soap endpoint in the SOA Infrastructure Common properties in soa server 11g. Did not provide the user-id and
password.
2) Restarted the servers so that the changes are effective.
3) In Jdeveloper 11g, Created a connection with UDDI Registry.
4) Created a sample BPEL process using Jdeveloper 11g that calls an already registered webservice in UDDI. This lookup web service has 3 different end
points (Dev, QA and Prod) and a binding of wsdlDeployment use type. The binding points to the actual wsdl Physical location.
1)     http://wasd.psc.com/SBDO.AD/services/Authez
2)     http://wasq.psc.com/SBDO.AD/services/Authez
3)     http://wasp.psc.com/SBDO.AD/services/Authez
4)     http://wasd.psc.com/SBDO.AD/services/Authez/wsdl/Authez.wsdl
5) In the BPEL created the partner link for this webservice using UDDI Registry and selected “Dynamically resolve the SOAP endpoint location at runtime”
option.
6) Generated the Configuration plan by right clicking the Composite.xml
7) Modified the configuration plan and added a new property name “endpointURL” that points to the development endpoint (referred in Point # 4). Pasting the
required portion of config plan for easy reference.
</component>-->
<reference name="PartnerLink_1_2">
     
     <binding type="ws">
     <attribute name="port">
<replace>http://ws.ad.sbdo.com#wsdl.endpoint(AuthezService/Authez)</replace>
</attribute>
<property name="oracle.soa.uddi.serviceKey">
<replace>uddi:8ada66e0-d12f-11dd-a8e2-e302c871a8e2</replace>
</property>
<property name="endpointURI">
<replace>http://wasd.psc.com/SBDO.AD/services/Authez</replace>
</property>
</binding>
</reference>
</composite>
8) Deployed the service by including the modified configuration plan.
9) The service was able to get back the result. But in the log, it is showing that the WSDL is being searched in all the end points available for that service and does
not take it to consideration the end point provided in the configuration plan.
Log details below
Connecting to http://wsop.psc.com:9082/registry/uddi/inquiry
INFO: SystinetWSDLSRResolverImpl.loginfo Searching for uddi:8ada66e0-d12f-11dd-a8e2-e302c871a8e2. INFO: SystinetWSDLSRResolverImpl.loginfo AccessPoint found
http://wasp.psc.com/SBDO.AD/services/Authez Type null. INFO: SystinetWSDLSRResolverImpl.loginfo AccessPoint foundhttp://wasd.psc.com/SBDO.AD/services/Authez Type null
INFO: SystinetWSDLSRResolverImpl.loginfo AccessPoint found.
http://wasq.psc.com/SBDO.AD/services/Authez Type null
INFO: SystinetWSDLSRResolverImpl.loginfo AccessPoint found.
http://wasd.psc.com/SBDO.AD/services/Authez/wsdl/Authez.wsdl Type wsdlDeployment
INFO: SystinetWSDLSRResolverImpl.loginfo Got wsdlUrl from wsdlDeployment - http://wasd.psc.com/SBDO.AD/services/Authez/wsdl/Authez.wsdl
INFO: SystinetWSDLSRResolverImpl.loginfo oracle.fabric.common.uddiurl.resolver.exception.SRHttpAccessPointNotFoundException: Could not find HTTP Accessport for service uddi:8ada66e0-d12f-11dd-a8e2-e302c871a8e2
WARNING: WebServiceExternalBindingComponent.getEndpointBySRKey Exception: getEndpointBySRKey oracle.fabric.common.uddiurl.resolver.exception.SRHttpAccessPointNotFoundException: Could not find HTTP Accessport for service uddi:8ada66e0-d12f-11dd-a8e2-e302c871a8e2
Questions / Issues
1) Why the registry search is being done in all the endpoints and is not searching only on the development end point provided in the configuration plan. I
added the SOAP endpoint in the service reference properties on the server as well, but still is searching on all the end points
2)     Not able to determine the root cause for the SRHttpAccessPointNotFoundException error observed. Please refer the above log for details.
Please advice and let me know if there is more information required.
Thanks
Raj
Edited by: user11122398 on Jul 27, 2010 11:00 AM
Edited by: user11122398 on Jul 27, 2010 12:00 PM

I supposed to make my previous question more concrete, the first answer I need before moving on to the rest of the bigger questions is this ...
What is Oracle’s recommendation for a services invocation framework between BPEL, JEE and ESB containers? From a quick read of Oracle Technet website, WSIF seem to be the preferred framework for this purpose. However, from an equally quick survey of such frameworks in use today outside of Oracle, WSIF does not seem to enjoy any widespread developer community support anymore and all talk in public forum seem to point to newer Apache Frameworks such as CXF which support emerging standards such as JAX-WS 2.0 What is the current stand of Oracle with respect to this matter?

Change the end point URL in WSDL for web-service

Hi All,
Morning , could someone please help us with this question, we are stuck with this currently.
In SOA Suite 10g as well 11g we have a jsimple Java class whose one of the methods is exposed as a web service.
In the project it has created the WSDL as well and have deployed the .ear file to the servers from EM console successfully.
Now we need to migrate this web service to testing & production environments.
1. Could someone please let us know the steps as to how do we change the end point url in the WSDL for this web service (present in web content --> WEB-INF/wsdl path in the j-developer project) for migration in case of both 10g (OC4J) as well 11g (WLS) servers.
2. Also could this change/update be done prior to deployment as well as post deployment as well.
Looking forward to inputs regards this...as we are stuck with this ..would be very helpful
Thanks as always for help & guidance..

Hi
As Vijay mentioned, you develop a WebService in JDeveloper and test in JDeveloper integrated Weblogic Server say at http://localhost:7101/MyWebService/MyPort?wsdl. Thats it. Once it is working. Export it into a .WAR file. If you have any other supporting EJB JARs etc, put all these into a full blown .EAR at application level. NOW deploy this .EAR or .WAR into any Domain on any host and any port. DOES not matter. That server's host and port will be taken. Infact even if this other domain is Clustered domain, still it will work by giving webserver host and webserver port that sits in front of the cluster.
I develop my webservices in JDeveloper and test at 7101 port. This .WAR gets deployed in QC Env at qchost:qcport. Same .WAR deployed to UAT at uathost:uatport and finally to prod also at prodhost:prodport.
Its just the Client (WebService Proxy) that is calling this WebService need to use appropriate host and port based on which Env it is connecting to. For this, simply do not hard code WSDL URL in the java code or anywhere. Simply get it from a .properties file using a key value pair like this.
WSDL_URL=http://host:port/MyWebService/MyPort?WSDL.
Now have Environment specific values for above key and put that properties file in that domain root folder. And in your code always refer this key.
You can use many approaches along the above lines.
If your WebServies proxy is a webservice adapter say within bpel, still you can modify the value using deployment plan .xml file file while deploying.
I would not absolutely prefer opening war file from ear and modifying war and updating ear file etc etc. Also do not have multiple EARs for Environment specific. Just have only one single EAR or WAR file that can be deployed to any environment.
Thanks
Ravi Jegga

Floating point question

I am trying to create a price attribute, so I need to places after the decimal point. I how do I set that when I create a table?

Example from Help section in Oracle SQL Developer:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP and Data Mining options
SQL> set serverout on
SQL> DECLARE -- Declare variables here.
2    monthly_salary         NUMBER(6); -- This is the monthly salary.
3    number_of_days_worked NUMBER(2); -- This is the days in one month.
4    pay_per_day            NUMBER(6,2); -- Calculate this value.
5 BEGIN
6 -- First assign values to the variables.
7    monthly_salary := 2290;
8    number_of_days_worked := 21;
9
10 -- Now calculate the value on the following line.
11    pay_per_day := monthly_salary/number_of_days_worked;
12
13 -- the following displays output from the PL/SQL block
14    DBMS_OUTPUT.PUT_LINE('The pay per day is ' || TO_CHAR(pay_per_day));
15
16 EXCEPTION
17 /* This is a simple example of an exeception handler to trap division by zero.
18     In actual practice, it would be best to check whether a variable is
19     zero before using it as a divisor. */
20    WHEN ZERO_DIVIDE THEN
21        pay_per_day := 0; -- set to 0 if divisor equals 0
22 END;
23 /
The pay per day is 109.05
PL/SQL procedure successfully completed.
SQL>It's not create table statement which you need but one can see in this example answer on your " Floating point question".
HTH
Message was edited by:
Faust

Change the end point in a web service client???

Hello,
With the Web Service Proxy Wizard of JDeveloper 10g R3, I created a web service proxy that connects to a (web service) end point like this: http://carina.bicevida.cl/OidServices/OidBasicWebServiceSoapHttpPort
My three related questions are:
1.- How can I change the end point registered in the (client) web service proxy ?
2.- How can I do this without need to rebuild the client application?
3.- How can I do this once my client application have been deployed in the application server?
Please help.

Hi,
these are your options
- Edit the endpoint meta data stored in the .proxy xml file (e.g. \src\project\myservice.proxy)
- Use WS proxy wrapper and call setEndpoint on the proxy
- Recreate the proxy in JDeveloper based on the new endpoint. This may require merging any business logic if it was inserted directly in the proxy (as opposed to a wrappering class)
where I think option 1 and 2 is what you would look for. I don't know how exactly JDeveloper 11 is different, but I got the info from development that there will be simplifications.
Frank

Ever since the ios8 updates i cant do calls when i need to or when someone tries to call me or facetime me i would try to accept and it would say connecting or end it. like *** it screwed up my phone. and my apps always crash

ever since the ios8 updates i cant do calls when i need to or when someone tries to call me or facetime me i would try to accept and it would say connecting or end it. like *** it screwed up my phone. and my apps always crash

The process may vary among phones, but on the Bionic:
Power down phone
Hold volume up/down & power simultaneously
Use volume down to navigate to 'Recovery', use volume up to select
Should see screen with triangle and exclamation point next to an Android
Press volume up/down simultaneously
Use volume rocker to navigate to 'wipe cache' and use power button to select
Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select

When using option right/left arrow in clip trimmer end point handle won't stick

From the help menu:
In the Clip Trimmer, do either of the following:
Drag the handles at either end of the yellow clip selection to set a new startpoint and endpoint.
Move the handles one frame at a time by placing the pointer near the handle that you want to adjust, and then holding down the Option key as you press the Left Arrow or Right Arrow key.
Move the entire yellow selection box to the left or right by pressing the Left Arrow or Right Arrow key, or by clicking within the box and dragging. Using this technique, you can change which video frames are selected without changing the duration of the selection
End of help menu clip
The bug I've found is that when I place the pointer near the end handle I can hit option arrow and trim the end one frame forward or backwards but when I then hit option arrow a second time the start handle is trimmed. Thus it is hard to quickly option arrow the end handle trim multiple frames without having to move the pointer each time before hitting option arrow. Trimming the start point handle works like I would like as I can just keep hitting option arrow and the start point handle will trim a frame each time. The end point handle should work the same way but it doesn't. I'm on the latest ver 9.02

Tea,
One thing you can do to help yourself out is to create bookmarks to give you a visual reference for the beats in the music.
You create a bookmark by choosing Bookmarks>Add Bookmarks or by typing command-b.
So you can place your song in the timeline and then play it while tapping out command-b's to the beat of the music. You'll then have little green diamonds in the timeline to use as reference points.
Similarly, you can choose View>Show Audio Waveforms to identify the beats in the music by seeing the peaks in the waveforms.
These techniques should make it a bit easier to make your edits in time with your music.
Keep in mind though, that your movie is built from left to right in the time line. When you edit a clip your clips will always slide in to take up any space to the left of the clip.
When they do that, you can slide them apart again. Doing so will create a clip of black between them that can later be replaced.
One last thing to mention. If you select your music track and then choose Advanced>Lock Audio Clip at Playhead you can then slide a clip around and the locked audio will move with it.
It's a bit quirky I've found, but may also be useful.
Matt

Error while creating the end point ICMON_UI_WS - SP11

Hi All,
We have upgraded the SAP Solution Manager 7.1 SP04 to SP11.
Currently i am working on system preparation.
solman_setup -> System preparation -> 5.3 Enable Web Services getting the below error
CX_URLAPI_URL_EXCEPTION : Error during End Point creation
Long Text(1)
Error during End Point creation.
Text(2)
CX_SRT_WSP_CONFIG : Error when reading variant "ICMON_UI" of service
definition "ICMON_UI": Web service object does not exist
Also checked the note :1900781 - Missing services required by Solman Setup System Preparation Step 4.3 Enable Web Services.
But this note is available for download.
Any idea about this issue.
Rg,
Karthik

Hi
Try out these point
1. Take the backup of the folder .dtc ,.dtr in your home directory.Delete .dtr & .dtc folders in your directoryt,hen try to create it.
2.Check NWDS, WebAS, NWDI, and its compatability ? Which versions are you running now?
3. [Connect to DTR Fails |http://help.sap.com/saphelp_erp2005/helpdata/en/69/21244134a56532e10000000a1550b0/frameset.htm]
4 . See the Note : 939041 & 772755
Best Regards
Satish Kumar

Connect Selected End Point Question

Similar Messages

Maybe you are looking for