Connect Solution Manager to Portal search

Hi Experts,
currently we have the requirement to connect our Netweaver Portal Search to SAP Solution Manager. The search should find documents saved in the Solution Manager.
After searching the SDN I found some hints but came to the opinion that there does not exist any standard approach. Is this true?
Following some more details describing my problem:
The Solution Manager is also used to save project related documents like concepts etc. These documents have to be found if the user enters a query in the NetWeaver Portal. The documents should only be saved in the Solution Manager, so it will be no solution to save the documents in KM.
The hints that I currently found:
Indexing documents - SolMan Document-Management Search
SolMan and Portal - Accessing Solution Manager 4.0 documents using KM
Using KM in Solman (the other way around) - KM in Solman
Any suggestions are welcome.
Kind regards,
Jan Tilo

Hi,
I hope below links will help you.
PDF link
<b>https://websmp206.sap-ag.de/~sapidb/011000358700006381312006</b>
SAP Tutor link
<b>https://websmp206.sap-ag.de/~sapidb/011000358700006477102006E.sim</b>
In order to connect solution manager to OSS means you need to configure the systems in solution manager using T-code SMSY.
After configuring you need to configure maintanace optimizer in solution manger.while configuring you need to specify the your S user id.
The above links will help you.
kiran kumar.v

Similar Messages

  • Connect solution manager to OSS - guide

    Hi,
    I couldn't find any notes or guide for the process. Can someone guide me
    to a guide or note of How to connect solution manager to the oss ?
    Best regards,
    Dimitry haritonov
    Message was edited by:
            Dimitry Haritonov

    Hi,
    I hope below links will help you.
    PDF link
    <b>https://websmp206.sap-ag.de/~sapidb/011000358700006381312006</b>
    SAP Tutor link
    <b>https://websmp206.sap-ag.de/~sapidb/011000358700006477102006E.sim</b>
    In order to connect solution manager to OSS means you need to configure the systems in solution manager using T-code SMSY.
    After configuring you need to configure maintanace optimizer in solution manger.while configuring you need to specify the your S user id.
    The above links will help you.
    kiran kumar.v

  • Connecting solution manager to Hp quality center

    Dear friends ,
    could someone please give me the steps involved in connecting Solution manager to Hp quality center to be used for testing purposes , any documents or links describing this configuration will be greatly appreciated
    thanks
    Harsha

    Hi Harsha,
    Check Note: 1059350 - Installing SAP Adapter for SAP Quality Center by HP.
    Here you will find all the steps required.
    Thanks & Best Regards,
    Raghavendra.

  • Solution manager in Portal - com.sap.portal.epsolman.EPSolman

    Hi
    I have implemented the standard Solution Manager reporting iView. When using this iView I often receive the error below.
    The error occurs when the iView has been open for a while and fails when I try to submit.
    I our DEV and QA environment it fails after about 8-10 minutes and in our prod it is more random like between 2- 7 minutes.
    The oddest this is that the same error occurs when I use the Reset button.
    First I thought it was a backend issue but when I fail as well when using the Reset button then I looks more like a Portal timeout issue.
    Anyone has any ideas on how to solve this issue?
    Thanks in advance
    Cheers
    John
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/Content/sol_man/iviews/com.webdata.iv.sol_man.i0062_role_application
    Component Name : com.sap.portal.epsolman.EPSolman
    The exception was logged. Inform your system administrator..
    Exception id: 03:29_04/09/07_0089_17936650
    See the details for the exception ID in the log file

    User mapping is only a part of singlesign on process to other systems from portal.
    As per my view , It is not possible to connect with only usermapping.
    Koti Reddy

  • Connection Solution Manager - Wily Enterprise Manager

    Hi all,
    we want to use SOlutionDiagnostics to monitor our abap and java instances. First, we would like to connect a abap system
    to our Enterprise-Manager and watch the results in solution manager.
    In transaction http//solutionmanagerhost:port/smd we are able to connect manually to our enterprise manager und log in, but solution manager didn't find the enterprise manager. ( we got the message: all the enterprise manager are offline ).
    What could be the reason ?
    How is an abap system registered in Enterprise Manager ? For java systems you have to add addiontianl java parameters in configtool. But for abap systems ?
    is there any howtoguide, how to connect systems to diagnostic and wathc the results in solman_workcenter für E2E ?
    the solution manager diagnostic instance ist already installed and registered over http://>SOLMANHOST>:/smd/go/ADMIN_AGENT
    kind regards
    andreas

    Hello,
    Are you using versin 8.0? If not use version 8.0.
    Regards,
    Paul

  • Connect Solution Manager to which client for SMD

    Hi all,
    do I have to connect the solution manager to the productive client of the sat. system?
    We have systems with more than one productive client. Can we connect the SDM to more than one client? How can we do this?
    Thank you
    Timm Funke

    Hi,
    thank you for this quick response!
    So it is possible to configure the landscap with client 000.
    Then, when all sat. systems are working fine within SMD, I can configure the producitve clients in smsy (the rfc destinations to the producitve clients). then I can access these clients from SMD.
    Is this right?
    Kinde regards
    Timm

  • Connection With Solution Manager!!!!

    HI all,
    01) Could anyone send me docs on How to connect Solution Manager With the ECC 6.0??
    02) How to do Issue tracking with solution manager and use as a repository??
    Thanks In advance
    Regards,
    Ami_Eka

    Hi,
    check following
    How to generate EWAu2019s From Satellite Systems:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
    SAP Solution Manager service desk:
    please refer to the SAP Help Portal (help.sap.com -> SAP Solutions -> SAP Solution Manager -> SAP Solution Manager [current release] [Choose language] -> Service Desk).
    https://websmp108.sap-ag.de/~sapdownload/011000358700000509252008E
    Maintenance Optimizer:
    https://websmp108.sap-ag.de/~sapdownload/011000358700000235502007E
    regards,
    kaushal
    Edited by: kaushal malavia on May 27, 2008 6:12 PM

  • RFC Connection Problem between Production Server & Solution Manager

    Hi,
    I want to make a RFC Connection between Production Server & Solution Manager.
    But when go through Tcode- SM59 and click on Remote Logon from Production to connect Solution Manager it showing me a  Client/Userid/Password window and when i connect go through Solution Manger to Production Server it connects normally. I already done the same process in both the clients, as i already mentioned Logon details in the Logon/Security tab but why it is showing me Client/Userid/Password pad when i am login through Production to SolMan?
    +Tell me where the actual problem is! In my Solution Manager end or in my Production Server end +
    I want to access Solution Manager from Production Server on just clicking once on Remote Logon from Tcode- SM59.
    Thank you.
    Edited by: varun@pcl on Jul 31, 2010 4:40 PM

    Hi
    Mention which Client u login and valid username and password from both PROD Server and Solman .
    https://websmp201.sap-ag.de/support under Solman manager .
    https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
    Regards

  • Solution Manager and HP Quick Test Connection.

    Hello Gurus,
    We want to use Solution Manager to make test for our developments, but our corporate tool for this is HP Quick Test.
    As far as I know it's possible to connect Solution Manager to HP Quick Test. Does anybody know about it?
    Thanks in advance.

    Hi,
    Are u mentoning about HQ Quality Center? If yes, these documents might help:
    SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> SAP Quality Center by HP -> Integration Test Management ...
    Also check SAP Note 1059350 - Installing SAP Adapter for SAP Quality Center by HP.
    Rajeev

  • Using TREX in SAP Solution Manager

    Dear all,
    I want to setup TREX for document search purpose in my SAP Solution manager system.
    There is already TREX installed on another system, & I have setup the connection between solution manager & TREX.
    My question is , in order to use TREX for document search , I need to connect solution manager to Knowledge warehouse?
    is this true?
    why can't we use TREX to search document in SAP Solution manager, BUT to use functions of SAP Knowledge Warehouse 6.0 or SAP Knowledge Provider, to store documents?
    and anyone can show me more detail documentation about the configuration?
    thank you very much to share!
    kelly

    Hi Kelly,
    You can have a look into the SAP Solution Manager system and there you can call transaction SPRO. You find information for TREX installation with the path:
    Solution Manager Implementation Guide ->SAP Solution Manager -> Configuration -> Cross Scenario Settings -> TREX Setup
    Best regards,
    Veit.

  • Transport Management System with Solution Manager

    Dear all,
    Do you know the function transport management system(TMS) with solution manager, I already search in SAP document but not found this function.
    Do you know how to config solution manager for TMS and documents related with this function please guide for me!
    Thanks all very much !

    Hi,
    Check this link.
    https://websmp103.sap-ag.de/~sapdownload/011000358700000508502008E/ChangeRequestManagement.pdf
    Hope this answers your questions.
    Feel free to revert back.
    -=-Ragu

  • Solution Manager 4.0 Solution Monitoring User -Roles-Profiles for Satellite

    Hi All,
    I have installed Solution Manager 4.0 (OS -Linux ,Database - DB2) .
    Now i need to connect solution manager to the R/3 4.6C
    Satellite Systems (DEV, QAS ,PRD) for Solution Monitoring
    and Service level Reporting .
    I have read the configuration guide , but unable to get clear idea .
    1) what users (alos type of user -Dialog , Service, Communication etc) do i need create in DEV , and Test in QAS  for solution Monitoring  .
    2) what exact roles /profiles need to be assigned to these users in satellite systems .
    3) what users/roles /profiles needs to be done in SOLMAN system
    i have applied all the required plug ins and support packs
    in satellite systems and solman 40 ..
    Please advice  . Your response will be a great help for me .
    Satish

    Hello Satish,
    Just clarify, if u have meant connecting the satellite systems for EWA reports to be precise. Early watch Reports. If its is the case, then repond so that i can putin my inputs which may be helpful for you in this config.
    Rgds,
    Sri

  • Integrating Solution Manager in EP

    Hi Experts,
       We have a requirement of integrating SAP Solution Manager with EP.Is it the same procedure that we normally followed at the time of integrating R/3 or CRM like creating a system in the landscape and establishing SSO.
    Regards
    Indranil
    Points will be awarded for useful answer.

    Hi
    Indranil Chakrabarty 
    Thanks for replying.I have already created a system to integrate solution manager & implemented SSO via log in/pwd.I am able to execute the transaction like solar01,solar02 through a SAP transaction iVIEW.
    The link you have send is describing about creating an iview of type epsolman type from par.By setting this can we execute all the transactions through iview...?
    creating an iview of type epsolman  from par  is used to create an iview in portal to send Support desk message to solution manager and this has nothing to with working with functions of solution manager in portal.
    i guess you wish to use functions of solman in portal.
    as people said here basic requirements are
    1) sso between solman and portal
    2) solution manager system in portal
    Regards,
    Vijay.

  • Error submitting a support message to Solution Manager

    I get an error when try to submitting a message to solution manager via portal. Can anyone explain why this error occur.
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.bc.SuperRoles/com.bc.role.solutionmanager/com.bc.rolefolder/com.bc.iview.solman
    Component Name : com.sap.portal.epsolman.EPSolman
    The exception was logged. Inform your system administrator..
    Exception id: 12:56_22/03/05_0012
    See the details for the exception ID in the log file

    Hi Ramesh. We are facing the same problems at a customer. Did you ever get an answer to your problem:
       Error submitting a support message to Solution Manager  
    Posted: Mar 22, 2005 1:59 PM       Reply      E-mail this post 
    I get an error when try to submitting a message to solution manager via portal. Can anyone explain why this error occur.
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.bc.SuperRoles/com.bc.role.solutionmanager/com.bc.rolefolder/com.bc.iview.solman
    Component Name : com.sap.portal.epsolman.EPSolman
    The exception was logged. Inform your system administrator..
    Exception id: 12:56_22/03/05_0012
    See the details for the exception ID in the log file 
    Kind regards Thomas

  • SAP Delieverd Content in Solution Manager

    Hi All,
       Like in BW, do we have any SAP delivered Business content like thing in Solution manager?

    Venkat,
    Search for this post: 
    Business Process Repository is sometimes confusing on transaction tab  
    Posted: Jan 12, 2007 5:32 PM
    The current SAP delivered content is not configured correctly and you should be aware of what you are getting before you begin.
    Mike

Maybe you are looking for