Connect to remote server
sorry, I'm new on this, but I couldn't find any example of connect string for rempte server (not even in the Oracle C++ Call Interface Programmer's Guide, ch2.
For example, if I want to use JDBC is:
"jdbc:oracle:thin:@prophet.njit.edu:1521:course"
How should be the syntax for OCCI?
thanks
Sergio
If you are at home what are you doing to access the server?
I have tried both using the URL and the IP number to the remote server, with and without the "afp://"-prefix. (AppleTalk is enabled in the SysPrefs.)
If this is a critical server then it is unwise to have the afp protocol opened up to the internet. Also Appletalk is not used in Leopard for file sharing it is a legacy protocol that still exists for printers.
The server runs OSX Server (10.4.?) as far as I know. It used to work in 10.5.4. Any ideas?
If your server is running Tiger server you should enable the vpn server and use that to access it from outside.
If a server admin setup your Tiger server I would be very surprised if they had opened up AFP to the world.
Similar Messages
-
How to connect a remote server in my local pc?.
I have a code to connect my server in visual basic 6.0 code, my sap version is 2007 A.
Private Sub ConnectToCompany()
'// Initialize the Company Object.
'// Create a new company object
Set oCompany = New SAPbobsCOM.Company
'// Set the mandatory properties for the connection to the database.
'// To use a remote Db Server enter his name instead of the string "(local)"
'// This string is used to work on a DB installed on your local machine
oCompany.Server = "(local)"
oCompany.language = ln_English
'// Use Windows authentication for database server.
'// True for NT server authentication,
'// False for database server authentication.
oCompany.UseTrusted = True
ChooseCompany.Show vbModal, Me
End Sub
but I want to connect my remote server and I didn't. Do i forgeting something??... I changed "(local)" for my name remote server or my local Ip for remote server. But maybe my user name windows for autentication. there is Someone who can help me please. Which one is the correct data I need??hello freind
i think yu are missing company usernsme,password,db type like this code
private void Connect()
try
Cursor = System.Windows.Forms.Cursors.WaitCursor;//Change mouse cursor
oCompany = new SAPbobsCOM.Company();
oCompany.DbServerType = (SAPbobsCOM.BoDataServerTypes.dst_MSSQL2008);
oCompany.Server = Properties.Settings.Default.ServerName.ToString();// change to your company server
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English; // change to your language
oCompany.UseTrusted = false;
oCompany.DbUserName = Properties.Settings.Default.UserID.ToString();
oCompany.DbPassword = Properties.Settings.Default.Password.ToString();
// Set connection properties
oCompany.UserName = txtUSer.Text;
oCompany.Password = txtPassword.Text;
oCompany.CompanyDB = Properties.Settings.Default.DatabaseName.ToString();
//Try to connect
lRetCode = oCompany.Connect();
if (lRetCode != 0) // if the connection failed
int temp_int = lErrCode;
string temp_string = sErrMsg;
oCompany.GetLastError(out temp_int, out temp_string);
// u.action_status("Connection Failed - " + temp_string, this);
if (oCompany.Connected) // if connected
this.Text = this.Text + " - Connected to " + oCompany.CompanyDB;
CheckUser();
Cursor = System.Windows.Forms.Cursors.Default; //Change mouse cursor
catch (Exception) -
SharePoint Online - "Unable to connect to remote server"
Hi,
I have a Provider Hosted App which gets the data from a different site collection. Now, when i try to connect to a different site collection, the TokenHelper
class gives me an error - "Unable to connect to remote server".
The error is thrown in the below line:
acsMetadata = webClient.DownloadData(acsMetadataEndpointUrlWithRealm);
The above error is not thrown always. It throws occasionally. I am not getting the reason for this. Could anybody explain what is the problem, please?Hi,
According to your description, my understanding is that the error "Unable to connect to remote server" occurs in the WebClient.DownloadData Function.
As this error throws occasionally, it should be related to the network issue, for a better troubleshooting, I suggest you can check the detailed error message using Fiddler.
Fiddler
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
SSRS 2008 - Unable to connect to remote server
Win2k3 R2 SP2/SQL Server 2008 instance with SSRS/Visual Studio 2008
I installed SQL 2008 and SSRS with native mode default configuration.
All SQL 2008 services are running under "NT Authority\Network Service" account.
When i try to deploy a new report, I get the "Unable to connect to remote server" error.
The deploy operation creates empty folders on the web server (hosted by the SQL Server 2008 service)
for e.g.
my instance name is <machinename>$sql2008. i configured the WebService URL and the Reports Manager URL to port 85
the deploy from VS creates ssrs2008Test folder and a Shared Data Sources folder in the following virtual directory
- Report Manager URL: http://<machinename>:85/Reports_SQL2008/
- Web Service URL: http://<machinename>:85/ReportServer_SQL2008
however these folders are empty w/ no .rdl or .rds file. and i get the "Unable to connect to remote server" error in Visual Studio 2008 when i deploy it.
is there something else i have to tweak in either the SQL Server/SSRS Configuration Manager or the Windows Server Settings(like port settings or group policy) to get the reports to work?
thanks
-vtSecureConnectionLevel = 2
From logFile:
appdomainmanager!DefaultDomain!740!08/29/2008-08:00:30:: i INFO: Appdomain:6 ReportServer_SQL2008_0-3-128644956308203194 started.
appdomainmanager!ReportServer_0-3!740!08/29/2008-08:00:31:: i INFO: RS authentication mode is 5; effective ASP.NET authentication mode is Windows. vdir=/ReportServer_SQL2008.
httpruntime!ReportServer_0-3!740!08/29/2008-08:00:31:: i INFO: Report Builder manifest file C:\Program Files\Microsoft SQL Server\MSRS10.SQL2008\Reporting Services\ReportServer\ReportBuilder\ReportBuilder_2_0_0_0\MSReportBuilder.exe.manifest not found.
appdomainmanager!DefaultDomain!740!08/29/2008-08:00:31:: i INFO: Appdomain:6 ReportServer_SQL2008_0-3-128644956308203194 initialized (#2).
webserver!ReportServer_0-3!740!08/29/2008-08:00:37:: i INFO: Reporting Web Server started
resourceutilities!ReportServer_0-3!740!08/29/2008-08:00:37:: i INFO: Reporting Services starting SKU: Developer
resourceutilities!ReportServer_0-3!740!08/29/2008-08:00:37:: i INFO: Evaluation copy: 0 days left
resourceutilities!ReportServer_0-3!740!08/29/2008-08:00:37:: i INFO: Running on 1 physical processors, 4 logical processors
runningjobs!ReportServer_0-3!740!08/29/2008-08:00:37:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
runningjobs!ReportServer_0-3!740!08/29/2008-08:00:37:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
runningjobs!ReportServer_0-3!740!08/29/2008-08:00:37:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
library!ReportServer_0-3!1588!08/29/2008-08:00:38:: Call to GetItemTypeAction(/ssrs2008Test).
library!ReportServer_0-3!1588!08/29/2008-08:00:39:: i INFO: Catalog SQL Server Edition = Developer
crypto!ReportServer_0-3!1588!08/29/2008-08:00:39:: i INFO: Initializing crypto as user: NT AUTHORITY\NETWORK SERVICE
crypto!ReportServer_0-3!1588!08/29/2008-08:00:39:: i INFO: Exporting public key
crypto!ReportServer_0-3!1588!08/29/2008-08:00:39:: i INFO: Performing sku validation
crypto!ReportServer_0-3!1588!08/29/2008-08:00:39:: i INFO: Importing existing encryption key
library!ReportServer_0-3!740!08/29/2008-08:00:39:: Call to GetItemTypeAction(/Data Sources).
library!ReportServer_0-3!1588!08/29/2008-08:00:39:: Call to GetItemTypeAction(/Data Sources/masterDB).
library!ReportServer_0-3!740!08/29/2008-08:00:40:: Call to GetItemTypeAction(/ssrs2008Test/sp_who2). -
Cannot connect to remote server
When trying to make connection to remote server, I receive a
message, "FTP, error, cannot make connection to host-Logon and
Password are incorrect... However, settings are correct as I could
get on in the past and when testing for remote site in site
management the message states "Adobe DW Cs3 connected to your web
server correctly".
My OS is MAC 10.4.11 My site developer can get on with DW8
using a PC and a MAC. Have tried everything short of deactivation
and reinstall.Plese tell us what your remote site definition has in each
field (you can
omit the password).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"TJMax412" <[email protected]> wrote in
message
news:gbtj7m$94l$[email protected]..
> When trying to make connection to remote server, I
receive a message,
> "FTP,
> error, cannot make connection to host-Logon and Password
are incorrect...
> However, settings are correct as I could get on in the
past and when
> testing
> for remote site in site management the message states
"Adobe DW Cs3
> connected
> to your web server correctly".
> My OS is MAC 10.4.11 My site developer can get on with
DW8 using a PC and
> a
> MAC. Have tried everything short of deactivation and
reinstall.
> -
Premiere Elements 8 "Could not connect to remote server" when sharing to YouTube
I'm trying to share my Adobe Premiere Elements 8 video to YouTube through the task panel, but I get a "Could not connect to remote server" message. My computer is connected to the Internet. I notice at the bottom of the message there is "Open the Opera Help" and "Go to Opera's on-line support desk." I don't have Opera on this computer, so maybe that's it?
No. You don't need Opera.
Have you gone to Edit/Preferences and ensured that your Web Services are up to date?
Otherwise, it could be that YouTube changed settings on us again. If that's the case, you'll need to post to it manually, per the FAQs to the right of this forum.
http://forums.adobe.com/thread/390608?tstart=30 -
I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.comHi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support -
Suddenly, thunderbird doesn't connect to remote server when i click "get messages".
Linux (ubuntu studio), 64 bit. Suddenly, thunderbird doesn't connect to remote server when i click "get messages". It just says "(account name): Connected to (mail server)" for a second or two at the bottom, then nothing. In the server logs, i get:
popa3d[6408]: Didn't attempt authentication
Trying to get my e-mail also seems to cause a bunch of these errors on the server:
(server) kernel: [18295.775491] lockd: cannot monitor laptop
where "laptop" is the client machine.
The problem seems to be caused by my mailbox files (Inbox and Inbox.msf) - when i create a clean ~/.thunderbird directory, i can get my e-mails, but when i place my mailbox files in this account's Mail directory, the problem comes back. Even if i place it as another name, and not Inbox.I should add the following information:
- Neither "safe mode" or rebuilding the global-messages-db.sqlite file fixes the problem.
- Seamonkey has no problems with my Inbox and Inbox.msf file.
- The Inbox and Inbox.msf files are symlinks to files on a NFS filesystem.
- Downgrading to an earlier version of thunderbird doesn't fix the problem.
- Even if i remove the mail file from an account, the problem persists.
- I confirmed that i can telnet to the server on the pop3 port and login with the raw protocol.
The above mentioned lockd errors make me think this is a NFS related error, but if that's the case, why is seamonkey able to read my Inbox file without problems but not thunderbird? -
Exchange 2010 SP2 Active DAG Node. Cannot cannot to Exchange Admin Console with the following errors and these errors change from time to time ... and some times it works ...
attempt to connect to http://DAGNODE.domain.com/powershell using "kerberos" authentication failed: connecting to remote server failed with the following message: The WinRM Client cannot complete the operation
within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for windows remote management service is enabled.
thanks,Hi,Philip,
Are you running the DAG on Windows server 2008 R2?If so check the following KB to see if they apply to your issue
http://support.microsoft.com/kb/976839
http://support.microsoft.com/kb/2294243
And you can check if the solutions in these old threads with similar error message do the trick for you.
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/54af902c-d718-4656-8a25-7c150e4b0e81/
http://social.technet.microsoft.com/Forums/en-US/exchangesvradminlegacy/thread/baa1af25-001a-432d-86a0-25c05655e63c/
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. -
How to connect to remote server with jmx from jvisualvm
I have a WL 10.3.2 domain running on a single box. The adminserver and managed server are running on the same box, on different ports (7001 and 8001, respectively).
I have a Spring application deployed to the managed server and I've configured it to register a Spring bean as a JMX mbean.
When I run this entire configuration on my laptop, I can run jvisualvm and connect to my server and see and manipulate my registered mbean.
I'm having trouble figuring out how to get a remote connection working, however. I want to run jvisualvm on my laptop and connect to the remote server.
I first did "Add Remote Host", where I specified the IP address. It appears that this was created successfully, and it apparently was able to determine the DNS name for it.
I then tried to add a JMX connection. In the "Connection" field, I just entered the IP address followed by a colon and 8001 (managed server port number).
In the "Use security credentials" section, I entered the weblogic admin principal and credentials.
When I click OK, it chugs for a while and eventually gives up, saying:
Cannot connect to [email protected]:8001 using
service:jmx:rmi:///jndi/rmi://nn.nn.nn.nn:8001/jmxrmi
What might I be missing?I've resolved this. At least I was able to configure an authenticated connection. It doesn't use SSL yet, but I'm ok with that for a while.
Resolving this only required changing the command line parameters for the managed server, and being aware of the "jmxremote.access" and jmxremote.password" files. The following blog article helped a lot: [http://www.dzone.com/links/r/monitoring_your_java_application_with_jmx_part_2.html] .
I'm now passing the following command-line parameters:
-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=8888 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=true
The default "role" configured in "jmxremote.access" is "controlRole", and the "jmxremote.password" file specifies the credentials for that principal. I simply used that principal and credential in JVisualVM, and the connection succeeded.
And I just used the "host:port" form, not the protocol form.
Edited by: david.karr on Feb 4, 2011 12:47 PM -
Error in connecting a remote server
hi friends,
Though Cisco VPN i'm trying to establish connection with a remote server.The VPN connection is successfully established
but when trying to logon to the sap server it gives NI(Network Interface error)
Can any one give some idea on what can be the problem?
thanks,
sachin soniHello,
Can you confirm if the system is up via normal intranet ?
If yes, please also check with your network guys if have openend ports 3600-3699. These ports are used by SAP NI interface.
Regards,
Siddhesh -
Can no longer connect to remote server via VPN
I recently installed OS 10.5.8, and have found that I can no longer connect to my server at work. The VPN itself (via PPTP) works fine, it's just that when I try to connect to the remote server (via Connect to Server) I get a dialogue saying 'A volume failed to mount.' A further dialogue says 'Sorry, the operation could not be completed because an unexpected error occurred. (Error code -6602)'
Has anyone found a way around this, please? I'm disabled and I need to be able to work from home – without the connection I'm stuffed! Obviously I've tried rebooting the machine etc, but nothing seems to help.
Thank you for any assistance you can give.
Kitty.For some random reason this connection has begun working again – please ignore the question!
-
Local Project Connecting to Remote Server
I am relatively new to Flash Remoting, and completely new to Flex. We have got the turnkey BlazeDS server running fine, and all the sample applications are running correctly.
What I am attempting to do now is to pull data from our remote server so that I can develop on the local box, but tie into the remote server. I have added a wide open crossdomain.xml policy that should not prevent access. I'm guessing that my error is deeper than that, as I'm not even sure it's hitting the server.
My error is: [RPC Fault faultString="[MessagingError message='Destination 'http://ec2-75-101-212-220.compute-1.amazonaws.com:8400/product' either does not exist or the destination has no channels defined (and the application does not define any default channels.)']" faultCode="InvokeFailed" faultDetail="Couldn't establish a connection to 'http://ec2-75-101-212-220.compute-1.amazonaws.com:8400/product'"]
Any type of guidance into setting up a local to remote environment would be greatly appreciated, I have been searching everywhere, but all examples I can find involve developing with BlazeDS running directly on the development platform.
Thanks,
SeanThanks, it took me a while to figure everything out, but that's exactly what I needed to do.
-
Access to local DataSource tries to connect to remote server after ejb call to remote server
I've run into a problem with code that worked fine under WebLogic 6.1 SP4, but I'm having difficulty migrating it to WebLogic 8.1 SP2.
I have two weblogic instances running in separate domains (InstanceA and InstanceB). The two domains have the same crentential configured to setup the trust relationship.
InstanceA runs on my local machine. It contains Stateless Session Beans StatelessSessionBeanA1, StatelessSessionBeanA2, and DataSourceA1
InstanceB runs on a different machine. It contains StatelessSessionBeanB1.
A function A1Func1 in StatelessSessionBeanA1
1) creates an initial context to connect to InstanceB
2) calls a method B1Func1 on StatelessSessionBeanB1
3) closes that context to InstanceB
4) Calls a method A2Func1 on StatelessSessionBeanA2
5) manipulates several entity beans
6) returns
A1Func1, A2Func1, B1Func1 have the "Required" transaction attribute set.
Steps 1,2,3 work fine, but on step 4, when A2Func1 attempts to get a Connection from the DataSourceA1, it gets an exception:
java.sql.SQLException: Could not get remote server connection url = t3://(IP/port of InstanceB)
at weblogic.jdbc.jts.Driver.createRemoteConnection(Driver.java:305)
at weblogic.jdbc.jts.Driver.connect(Driver.java:157)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
... enters my application code
A2Func1 works fine elsewhere, so on a hunch, I tried making A2Func1 have the "RequiresNew" transaction attribute. This causes steps 1,2,3,4 to work, but in step 5, when the entity beans attempt to get a connection from DataSourceA1, it runs into the same exception
java.sql.SQLException: Could not get remote server connection url = t3://(IP/port of InstanceB)
at weblogic.jdbc.jts.Driver.createRemoteConnection(Driver.java:305)
at weblogic.jdbc.jts.Driver.connect(Driver.java:157)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:2247)
Any ideas why calling out to StatelessSessionBeanB1 would cause things inside the same transaction to try to get their datasource from InstanceB? Again, this code worked fine under WebLogic 6.1
And ideas would be appreciated.
Thanks,
--Andy
As a follow up, no solution, but a workaround - we changed the transaction setting
on B1Func1 (which was a read type method) on InstanceB's StatelessSessionBeanB1
to NotSupported, and everything started working again.
--Andy
Andrew Delpha <[email protected]> wrote:
>I've run into a problem with code that worked fine under WebLogic 6.1
>SP4, but I'm having difficulty migrating it to WebLogic 8.1 SP2.
>
>I have two weblogic instances running in separate domains (InstanceA
>and InstanceB). The two domains have the same crentential configured
>to setup the trust relationship.
>
>InstanceA runs on my local machine. It contains Stateless Session Beans
>StatelessSessionBeanA1, StatelessSessionBeanA2, and DataSourceA1
>
>InstanceB runs on a different machine. It contains StatelessSessionBeanB1.
>
>
>A function A1Func1 in StatelessSessionBeanA1
>1) creates an initial context to connect to InstanceB
>2) calls a method B1Func1 on StatelessSessionBeanB1
>3) closes that context to InstanceB
>4) Calls a method A2Func1 on StatelessSessionBeanA2
>5) manipulates several entity beans
>6) returns
>
>A1Func1, A2Func1, B1Func1 have the "Required" transaction attribute set.
>
>
>Steps 1,2,3 work fine, but on step 4, when A2Func1 attempts to get a
>Connection from the DataSourceA1, it gets an exception:
>java.sql.SQLException: Could not get remote server connection url = t3://(IP/port
>of InstanceB)
> at weblogic.jdbc.jts.Driver.createRemoteConnection(Driver.java:305)
> at weblogic.jdbc.jts.Driver.connect(Driver.java:157)
> at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
> ... enters my application code
>
>A2Func1 works fine elsewhere, so on a hunch, I tried making A2Func1 have
>the "RequiresNew" transaction attribute. This causes steps 1,2,3,4
>to work, but in step 5, when the entity beans attempt to get a connection
>from DataSourceA1, it runs into the same exception
>java.sql.SQLException: Could not get remote server connection url = t3://(IP/port
>of InstanceB)
> at weblogic.jdbc.jts.Driver.createRemoteConnection(Driver.java:305)
> at weblogic.jdbc.jts.Driver.connect(Driver.java:157)
> at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
> at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:2247)
>
>Any ideas why calling out to StatelessSessionBeanB1 would cause things
>inside the same transaction to try to get their datasource from InstanceB?
> Again, this code worked fine under WebLogic 6.1
>
>And ideas would be appreciated.
>Thanks,
>--Andy
-
URGENT HELP - SWF in html doesnt connect to remote server
Hi,
I have an swf placed on a website which needs to connect to a
remote server but it doesn't work. I'm using SWFObject to embed the
swf file and i can see it no problems and the buttons are
definitely active but it never connects to the server that's it's
pointing to. I've tested with different servers and it's the same
for all of them even one with absolutely no firewall or virus
protection.
It seems something is blocking the files as the correct
requests are being made (i checked with trace statements)....I
think it's the flash.....is there something i'm doing wrong in the
publishing of the swf file?
thanks for any suggestions!
Greg
ps. sorry for cross posting - this is urgent!Hi,
If you have a swf living on one server and communicating with
another, you need to have a crossdomain.xml file placed in the root
of the remote server you are calling. This is a security
restriction that started with Flash Player 6.
You can read more about it here :
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14213 -
F107 error ubnable to establsh connect to remote server
Groupwise 8.0.2 with netware 6.5 sp8. Getting error when startup the POA during a boot up.
On 10.05.2011 00:06, sl0000 wrote:
>
> Groupwise 8.0.2 with netware 6.5 sp8. Getting error when startup the POA
> during a boot up.
Somewhere in your POA configuration is a path to a remote server defined
(which you really shouldn't do on purpose), and the POA doesn't know how
to connect to that server.
Start with the paths in the .poa config file.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de
Maybe you are looking for
-
Error trying to Connect to WSE 2012 R2 with Connector Software - The server is not available
I had to completely reset my MS Surface Pro 3 due to virus activity, so it was wiped and reinstalled. It had previously connected to the Server without hiccup. Ever since doing this I cannot reconnect using the SERVERNAME\Connect process - it continu
-
Calling EJB from class in same ear
Has anyone ever attempted to call an EJB from a class that is in the same ear? I have a singleton class, not another EJB, that is trying to get ahold of an EJB to call a method. This method has been defined to have both a local and remote interface.
-
i created a report to download values from a table into xls file.and when i open the file in txt,its opening in tab delimited format. now,instead of that i want the file to be opened in |(pipe) delimited txt file. can any one help me in this regard.
-
ILife missing from new mac!
Hello there I've just got my brand new Mac - literally just 10 mins ago, and thats me all set up. I bought it online from a UK retailer, and although it was refurbished, it was advertised that it would include iLife "Includes iTunes, Time Machine, Qu
-
Hi All: I need to create one JMS to JDBC Scenario. For Sender side i.e JMS what I need to do. Like I dont have any messaging System like MQ series etc. I have JMS client and I know how to use JMS adapter, but where should I create Queue? In there any