Connected a new 27" LED display and only get 1280 resolution

Ok....got the monitor connected through the adapter (AD-TP400) and only get 1280 resolution....how do I get the full res on this monitor?

Interesting. I have your monitor directly connected to a 2010 Mac Pro which has the mini displayport built into the video card. I also still have the original Mac Pro (1,1) it replaced and that has the NVIDIA GeoForce 7300GT with 2 DVI ports, the one on the right being dual-link.
Where did you get the AD-TP400 adapter? I've searched on that part number and can't find it anywhere. I do see that Apple lists a connector which can do that but there is no part number associated with it.

Similar Messages

  • In firefox auroras new camera API I am only getting 320x240 resolution images. Is this configurable?

    While testing Firefox Aurora's new Camera API I found that I'm only receiving 320x240 png files. For our needs this would have to be a higher resolution image. Is this configurable? Or is this an issue with the device or something else?
    I'm using the Samsung Galaxy Nexus S.

    It is a limitation of the initial version. We have improved it, interfacing with the default camera app on the phone. We plan to release this change in Firefox 11.

  • How do I connect a new Thunderbolt MBP to and old 23" HD Cinema Display ADC port

    A question Im sure many have asked but I cant find a straight forward answer.
    I simply will be buying a new thunderbolt MBP 15 and NEED to connect it an old 23" Apple Cinema Display that uses the old ADC connector.
    Can I do it and if so how? I realise theres a potential under powering issue?
    Thanks

    Hello Sigh
    I am sure there is no way to get your ADC connector display to function with your new Mac Book Pro.
    I tried everying I could and gave up and purchased a 24" Apple refurbbished Cinema Display for $599 + tax on 4/27/2011. The Apple part number is FBXXXXL/A, Model A1287.
    Gave my  year 2002 ADC 22" display to a friend.
    d
    Sent- Tuesday, August 9, 2011-- 3:49 PM(Pacific Time)
    Don Macdonald
    < Edited by Host >
    Re: How do I connect a new Thunderbolt MBP to and old 23" HD Cinema Display ADC port Jul 8, 2011 4:58 PM (in response to Russy47)
    Got my new MBP 2011 today. Hooked it up to my 23" Apple Cinema Display fine, using the Apple DVI to ADC converter > Mini Display port adaptors. I could then mirror display, but only at 1440 x 900 resolution.
    My dream is to have it like my old laptop--I mostly leave it shut, and main display is on the Cinema Display. So far, if I close the laptop lid on my new MBP, display shuts off. Also, can't get it to bump up the resolution to 1920.
    Sigh.

  • Just installed 7.02 and only get itunes icon and usb cord. If I connect to itunes as requested, will I lose all my photos ?  7 installed just fine, why the problem with 7.02 ?

    Just installed 7.02 and only get itunes icon and usb cord.  Why should I have to connect to itunes ?  If I do, will I lose all of my photos ?  Shouldn't I get free service for their software problem ?

    You don't have to update to 7.02 if you don't want to, though this update does fix a few glitches in 7.0.
    Before updating, you should always back up your data - it's standard practice. I've never lost pictures in an iTunes update.
    Perhaps you could elaborate on the comment, "Just installed 7.02 and only got itunes icon and usb cord." What problem are you having, exactly.
    Your next question confuses me. "Shouldn't I get free service for their software problem ?." What free service were you looking for? You can always go to your local Apple store for help, or ask questions here for free.

  • How do I connect my iPhone to my mac and only have items sync manually?

    How do I connect my iPhone to my mac and only have items sync manually?

    Go to preferences in itunes and set it not to auto sync

  • HT201263 the "connect to itunes" screen is displayed and will not change

    The "connect to itunes" screen is displayed and does not change after an update.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • When I connect my new iPad2 to PC and start syncronising the routine stops at point 2 backup what can I do - Moreno Italy

    When I connect my new iPad2 to PC and start syncronising, the routine stops at point 2 during the backup. What can I do ?
    Moreno Italy

    Couple of things you can try.
    Make sure your windows firewall and anivirus are turned off. 
    Second, think about what apps you may have loaded.  In prior posts really long or interrupted back ups were tied to apps that had an unusually large or messed up data content.  Like comic book or magazine readers.  Somme of those apps just do not work great in the backup world.
    If the pad is new, and you do not have a lot of stuff on it, you can skip,the backup step entirely by clicking the little x in the process window in i tunes.  Before you start the process, though, make sure up have transferred your purchases to i tunes. ( i tunes, at the top, under the file drop down), and import any pictures into iphoto, or whatever photo library you are using.  Then start the process.  When it gets to the backup set, click the x, and the pad will go on and sync.
    When i had the same problem, deleting the suspected bad app, and a successful sync without backup cured it.

  • I am using elements 10 and only getting audio not video.  Can anyone please explain why? I am a total newbie to video.

    I am using elements 10 and only getting audio not video.  Can anyone please explain why? I am a total newbie to video.

    greenfrogstone
    Just saw your thread, and it looked like a candidate for the Premiere Elements 10 NVIDIA GeForce Roll Back the Driver issue. If your computer uses a NVIDIA GeForce video card/graphics card, then the following applies to you. You do not want to update the driver. Rather you want to roll back the driver version, probably to about May 2013. For your convenience I have done a copy/paste of the forum announcement which gives all the details and fix of the matter.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    This matter has been very specific to the Premiere Elements 10 NVIDIA GeForce card user. So, if your computer is using other than a NVIDIA GeForce card, it is likely that the message does not apply to you, and we can then explore other troubleshooting possibities.
    Looking forward to your follow up. Do not hesitate to ask for clarification on anything written here.
    Thanks.
    ATR

  • HT3775 Why won't quicktime player work? I own Mac Book Pro with Retina Display and connote get the quicktime player to open or play quicktime movies?

    Why won't quicktime player work? I own Mac Book Pro with Retina Display and connote get the quicktime player to open or play quicktime movies?

    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Preferences/com.apple.quicktimeplayer.plist. Move the .plist to your desktop.
    Open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer one.
    Thanks to leonie for some information contained in this.
    You might need to redo the View settings after an update.

  • I'm new to Photoshop Elements and just getting started.  While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon.  How can I remove this so that the photos will be restored to normal?

    I'm new to Photoshop Elements and just getting started.  While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon.  How can I remove this so that the photos will be restored to normal?

    Go back to the editor and close the photo there.

  • I try to install i cloud on my new HP desk top and i get the message"you can't sign in because of a server error"

    What can I do?
    I try to install i cloud on my new HP desk top and i get the message"you can't sign in because of a server error"

    I also have the same problem. I've tried all fixes listed in other forums and nothing works. Running windows Vista 32 bit. Any working solutions yet? Tried every solution listed for the cmd prompt. Turned off antivirus and spyware. Rebooting about 100 times. Nothing works.

  • I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    Not all car systems are compatible with the iPod touch.  Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

  • Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue

    Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue

    Hi Tatilopez86,
    If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Apple Support: Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    - Brenden

  • Recording stereo audio and only getting one side - what gives?

    Recording audio in stereo mode in logic and only getting one side showing on the meter and same side showing on the audio file - I've checked the interface - is there a logic setting I'm missing?

    Is Universal Track Mode enabled?

  • TS1702 Downloaded Air Supremacy game app and only get company logo or black screen before iPad returns to home screen. Checked iPad and app up to date, no better. Any suggestions?

    Downloaded Air Supremacy game app and only get company logo or a black screen before the app closes and goes back to my home screen. Checked that iPad and game are latest versions of software and restarted the iPad still with no luck. Any suggestions.

    Have you tried a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

Maybe you are looking for