Connected everything on my new (previous gen...not the new tower, mind you) TC, but can't get beyond flashing yellow. Had to reconnect my old router to send out the "HELP!" request. Can anyone advise, please?
Please advise. I just tried connecting my newly purchased (previous generation...not the newest "Tower" model) Time Capsule, but cannot get beyond the "blinking yelow light". I had to connect up my old router (the one I'm trying to replace with this new TC) just to send this help request. Can anyone please advise an old dude?
If you pulled out an existing router.. then you have a modem.. what modem is that? Explicit details help loads.. and loads.. and even more loads.. we cannot guess solutions without knowing the setup.
But you can simply configure the TC in bridge mode.. do it directly connected to the TC with ethernet wire.. LAN TC to computer and configure it in bridge.
Then setup wireless any way you want..
You can turn it off and still use the wireless on the old router.
You can setup a new wireless network.. and connect to that.
Or you can setup roaming network, ie use the same wireless name and same security settings and password as the existing router.. assuming it also has wireless.
Do nothing at all and it will still work..
Similar Messages
-
Error B839FEAC can't get beyond flashing lights
I have an HP 6600 Officejet. I am trying to get beyond the message "Printer Error" "Please turn Printer Off and then On".
When I press the On/Off button it only goes through a restart and will not turn all the way off. They as it goes through the start up a blue screen pops up momentarily with the code: B839FEAC. From my research that seems to be something to do with the WiFi card.
I have restarted the printer about 5 times using the On/Off button and I have tried unplugging the device and then reconnecting but that does not seem to do anything either.
Any suggestions?
Thanks,
act98006Hi act98006,
Welcome to the HP Forums!
I understand that you are getting the error B839FEAC with your HP Officejet 6600, and I am happy to help you!
Please make sure the power cable is plugged directly to the wall outlet, not a surge-protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
For further assistance, I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If you see any other error messages.
Hope to hear back from you, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
How can I get a flash based plugin to load in CC 10.x
Hello
How can i get a flash based creative suite plugin to load in Indesign CC 10.x?
I can get It to load in CC, but not In CC 10.x. Im using Flashbuilder 4.5. Do I need a newer version of flash builder/extension builder?
Best regards
/ PontusYes, you can!
You need to make sure that you are using: "Adobe CSAW Indesign" and not "Adobe CWSAW".
Also you need to hack the manifest.xml and write someting like this:
<HostList>
<Host Name="IDSN" Version="[7.0,10.9]" />
</HostList>
To get it to load in CC 14.
/ Best regards
Pontus -
Every time I login I get the message "aosnotifyd wants to use your confidential information stored in "my name" in your keychain." How do I know if it is safe to allow this? Can anyone advise please?
My immediate reaction is to deny.
Have you downloaded or installed any application that may relate to the abbreviation AOS? It may not necessarily be the application's name, could be the developer or distributor.
As it's occuring at log-in, go to System Preferences > Accounts > your account > Login Items and look for a related item. If there's one there, right-click (or ctrl click) on it and select Reveal in Finder. That will show you where the originator of the item is on your system and should give you more of a clue as to what it is.
I'd remove the item from login items anyway (highlight and click the minus sign at the bottom of the window). There shouldn't be anything trying to use your keychain info to notify anyone. -
I have the correct cable but my purchased movies say they are unable to play on my smart TV and they need to be unlocked. Can anyone advise please? Thanks,
It's possible that the DRM (digital rights management) disallows you to port those movies onto a TV. What app are you using? Some apps are 'ipad only' and will not push out to another screen.
-
Can't get iphone to recognize itunes on my computer. do i have to use the original cord to connect? i can't find the cord. please advise.
Do you mean that iTunes doesn't recognize your phone when you plug it into your computer using the usb to dock cable? If so, see http://support.apple.com/kb/TS1538. (And yes, you need to use the usb to dock cable that came with your phone. If you dont' have it you'll have to buy another one.)
-
I Want to stop download of iOS 8 and start again
sorry, thought my question had been posted. I started downloading iOS 8 24 hrs ago, it is still downloading now, have tried off/on with 2 buttons but still the same can anyone advise please cheers
-
Every time I open Firefox I can't get beyond the first page. No connection to internet. It just says "connecting" and hangs. I create a new profile and delete the old one and I can start firefox and get to the internet, but when I shut the system down, the next time it will not go beyond the first opening page and the "parent.lock" file is present in my profile folder.
Every time I open Firefox I can't get beyond the first page. No connection to internet. It just says "connecting" and hangs. I create a new profile and delete the old one and I can start firefox and get to the internet, but when I shut the system down, the next time it will not go beyond the first opening page and the "parent.lock" file is present in my profile folder.
-
Hi all, can I please set the "latest news" to Australia not UK News
Hi all, can I please set the "latest news" to Australia not UK News.
Thanks StephenSee:
*https://support.mozilla.org/kb/How+to+change+the+Latest+Headlines+feed -
My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?
Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again -
I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can anyone help me please as I have several photos to edit before the end of this month. Many thanks for any help
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciatedYou are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network. -
How different of PDF downloning with open in new Tab or not Open new Tab
How different of PDF downloning with open in new Tab or not Open new Tab?
My web site distributes PDF files,
and user can download the PDF files in my site.
The problem is I wanna show PDF that download in new tab,
but pdf only downloaded, not open new tab.
How to open new tab by downloading a PDFHow different of PDF downloning with open in new Tab or not Open new Tab?
My web site distributes PDF files,
and user can download the PDF files in my site.
The problem is I wanna show PDF that download in new tab,
but pdf only downloaded, not open new tab.
How to open new tab by downloading a PDF -
I do not use or have not signed up for a MobileMe Account but I am getting duplicates in my iCal for some reason. All discussions I read are pointing to the MobileMe being the problem but it is not. Please help me. There must be another reason all my entries appear twice.
If you wish to submit comments to Apple, the best way is to use their feedback pages.
http://www.apple.com/feedback/itunesapp.html
It's not likely that anyone from Apple will see your comments here among the thousands of other posts.
Regards. -
I am trying to update my iphone 4 to ios 7.2 but I can't get beyond the "connected to itunes" screen - once I sync - nothing happens. Advice?
Hello hfb8,
I would be be concerned too if I was not able to update my iPhone. If you have not resolved the issue, I recommend following the steps in this article for an issue like this:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
I tried to upgrade my early 2011 mac book pro to mountain lion so I can use airplay. purchased it from apple store got a license with a contend code. when to the app store and tried to redeem the upgrade. put in the code but nothing happen...
-
If I have diferent video clips in a DVD how can I play continuosly?
I created a DVD with so many diferent videos as a chapters but when I play the disc I have to see it one by one because I don't know how to create the option of "play it all" Whatever hint is going to be really appreciated.
-
Prompt date value with default max from table1.column1
Hi all, How do I prompt user for date of report with default date = max(table1.column1) ? Give me some example of syntax pls. Thanks ahead.
-
Crystal report 2011 percentage calculation(Urgent)
All, I am working on a report which looks like the below. product>>>>>>> revenue>>>>>>>>> growth percentage a >>>>>>>>>>> 12 >>>>>> >>>> 48% b >>>>>>> >>>>>>>13 >>>>>>>> 52% c >>>>>>>>>>>>> 14 >>>>>>>>>
-
Hello, I'm trying out the Aperture 3.0 trial version, and have upgraded it to the latest patch 3.1.2. The problem I am having is with the Highlights & Shadows brush - it just won't apply any changes to the image. I can apply changes using the H&S bri