Connecting Apple TV to router with ethernet cable

help connecting Apple TV to router with ethernet cable

The process is transparent. I have done it before.
Now, it gives me an error message when I try Wi-Fi:
"There was a problem connecting to the network. Check your settings and try again.(5)"
When I try the ethernet cable connection it won't let me do automatic or custom.
I unplugged and replugged the Apple TV box but don't know how else to trouble shoot the lack of connectivity.

Similar Messages

  • How can I connect Apple TV to iMac with ethernet

    AppleCare told me to plug the Apple TV into the iMac using ethernet to transfer the iTunes content faster with less glitches.  But how do I see the Apple TV screen on my iMac to configure it???  When I connect Apple TV using ethernet, nothing appears on the iMac screen.

    This only applies if you have a first generation Apple TV. Also I hope you have a router and are not connecting the ATV directly to the iMac.
    Usually I sync my First Generation Apple TV wirelessly, but sometimes I'll have some huge media files I want to sync on it which can take a long time. In those cases all you do is connect your Apple TV via ethernet cable to the same router your iMac is connected to. Don't worry about it not being connected to a tv because all you are going to do is SYNC your Apple TV. If you do not see your Apple TV in iTunes, turn off the Apple TV, and quit iTunes. Then turn on the Apple TV first, wait a minute and then start iTunes. Once iTunes sees the Apple TV, manage your content, then sync it.
    Once the Apple TV has completed its sync, quit iTunes. Unplug your Apple TV, and then put the device back by the TV you want to enjoy the content on.
    I have done such a thing a few times and it works flawlessly.

  • Does the airport express need to be connected to router with ethernet cable to work?

    We are trying to set up 2 zones for streaming music. The guys at Apple sold me an airport express. However I cannot get it to connect to the internet unless it's wired directly to my wifi router. This does not work for me as the components I need to plug into it are located in another room of the house. Am I doing something wrong or am I trying to get the AX do something it can't?

    The Express cannot wireless extend non apple router.. however it can join a wireless network that is non-apple and it can work as a wireless to ethernet bridge. It should be able to connect the audio output to amp or speakers. But you need to do the setup, choosing join a wireless network which is under the options and not displayed as a standard connection type in the utility.
    Here is one example of doing it.
    https://discussions.apple.com/thread/5719954?tstart=0

  • HT3728 every time my iMac sleeps or restarts it loses the connection to airport express and i must reset and connect with router via ethernet cable.

    Every time my imac sleeps or restarts it loses the wireless connection with my airport express (used for streaming music). I then have to disconnect the airport express from my stereo, bring it to my router, connect it to my router with ethernet cable and reset the wireless connection. Even with my airport express  in the same room as my router Airport Utility cannot find it until i plug in an ethernet cable, so i do not think this is an issue with my wireless network. Router is a newer netgear.

    Hi there frustrated newbie 2014,
    You may find the troubleshooting steps in the article below helpful.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    -Griff W. 

  • Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

    Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

    Are you following these instructions?
    http://support.apple.com/kb/ht4796
    Have yo tired by connecting both to same network vice direct ethernet connection?
    There is no direct USB connection

  • Connecting time capsule to wireless modem router via ethernet cable

    Hi
    I use my TC to store all my data and itunes music/media. I've noticed that when purchasing music, the download speeds are quite slow, even though when I test the broadband speed, it's at a reletively ok 5 mbps. If I hard wire the tc to the modem router, will the downloads be faster? If so, how do I connect them up with ethernet cable. I've done so, and nothing seems to appearing on my desktop.
    cheers
    Mark.

    Reset the TC to factory settings. This will allow you to reconfigure the TC to use Ethernet.

  • On my MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks.

    On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!

    I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.

  • HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    Wirelessly
    Just select the option to make your AirPort Express join an existing network in the setup process

  • How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

    My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

    Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
    Click on the Wireless tab at the top of the page
    Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
    Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
    Then, you must power off your entire network...all devices....in any order that you want
    Wait a minute
    Start your modem/router first and let it run a minute
    Start the Time Capsule and let it run a minute
    Keep starting devices one at a time until everything is powered up
    If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
    Open System Preferences (gear icon) on the dock
    Open Time Machine
    Click Select Disk
    Click the Time Capsule to highlight it
    Click Use for Backup or, it might be Use Disk
    Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
    If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

  • How to connect Apple TV to ipad2 with air play

    Hi...how to connect Apple TV to ipad2 with AirPlay

    Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
    The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
    I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success.

  • Can connect via wifi but not by ethernet cable?

    Hi,
    I'm a bit confused here.
    I have an airport express which works fine and I just bought an airport extreme.
    The airport extreme is connected to the modem by an ethernet cable and the airport express is connected by ethernet cable to the airport extreme.
    I am able to connect to the airport express wifi with all the computers but I'm unable to connect any computers to the airport extreme via ethernet cable.
    Both airport express and extreme are lit up green and they both appear on the Airport Utility.
    The airport extreme setting is set so that it is joining the airport express' network. That's the only way the light shows up green instead of flicking amber.
    I've looked at the settings over and over again and am not sure/don't understand why this is? All I know is that I've got the wifi working! The ethernet connection is not workin for both PCs and Mac.
    Any help is much appreciated!

    The airport extreme is connected to the modem by an ethernet cable
    On the WAN plug, right?
    and the airport express is connected by ethernet cable to the airport extreme.
    Why? You don't need AirPort Express anymore, unless you have signal weakness in your home.
    If that is the case, you can use the AirPort Express to extend the range of the new AirPort Extreme WiFi network with WDS (Wireless Distribution System).
    http://support.apple.com/kb/HT1515?viewlocale=en_US

  • My PowerBook g4 says it's connected to the Internet and the Ethernet cable's plugged in, but every time I open Safari it says I'm not connected. What can I do to get Safari to get online?

    My PowerBook g4 says it's connected to the Internet and the Ethernet cable's plugged in, but every time I open Safari it says I'm not connected. What can I do to get Safari to get online?
    Also I'm having problems with my PowerBook G4 on recognizing my HP Photosmart C4680 All-In-One Printer/Scanner/Photocopier.   This is connect via USB printer cable, but yet they're not syncing. How can this be resolved?

    Internet Quick Assist:
    http://support.apple.com/kb/HT1144?viewlocale=en_US
    Troubleshooting internet settings:
    http://support.apple.com/kb/HT1714?viewlocale=en_US
    As for the printer problem, is this a new problem?
    Try an SMU reset:
    http://support.apple.com/kb/HT1939?viewlocale=en_US
    http://support.apple.com/kb/HT1436
    Then repair permissions and restart.

  • Apple Tv sound dropout with optical cable

    Hi there,
    First of all Merry Christmas to everybody out there...
    I received yesterday for christmas the latest apple TV.
    I connected it to my tv with HDMI cable and to hifi, bose home cinema lifestyle 28, with optical cable.
    Sound through HDMI cable is perfect but...playing music from macbook pro or iphone 4S through optical cable is a problem.
    I have sound drop outs for a second now and then...
    Cable is well attached on both sides...
    What do i have to do?
    Kind regards,
    Laurent

    I also have this problem...  Any ideas

  • Can we connect Apple TV directly in a Cogeco cable decoder?

    Is it possible to connect Apple TV directly il a Cogeco cable decoder and tranfer registred tv show from decoder to Apple tv and then to Mac Book Pro, Ipad or Iphone?

    no
    AppleTV has one type of input, network, either wireless or ethernet cable. It can play media from supported internet sites (apple, netflix, youtube and few others) or your iTunes on your PC or Mac.
    AppleTV has two outputs. HDMI to a TV (or HDMI switcher, like a receiver) and toslink fibre audio to a TV or receiver.

  • When using iCloud: If I have purchased a CD at a shop, and I sync it to my iTunes account on my laptop, will it automatically appear on my iPod Touch, or will I have to connect it to my laptop with a cable?

    When using iCloud: If I have purchased a CD at a shop, and I sync it to my iTunes account on my laptop, will it automatically appear on my iPod Touch, or will I have to connect it to my laptop with a cable?

    Welcome to Apple Support Communities
    You have to connect the iPod to the PC and sync it to get the songs in the device. You will only get your music in your iPod automatically if you have purchased your songs in the iTunes Store and Automatic Downloads are enabled in your iPod

Maybe you are looking for

  • How to express cell format in Numbers?

    In Numbers on Mac, I want all positive numbers in cells to display in blue with comma separators and a leading + sign.  Example: the value 4135 should appear as +4,135 I want all negative numbers in cells to display in red with comma separators and a

  • Is there something wrong with my battery?

    Hi everyone! I have an Iphone 5 that was newly "remodeled" for tmobile. I was wondering if there was something wrong with my battery after a recent decline in performance. I am updated to the latest iOS and I recently restored all of my settings on m

  • File to Proxy (Inbound)

    Hi, I have file to inbound proxy with data posting to ECC using web services WSDL. The message in message monitoring shows successful but the data is not getting posted in the ECC. Please advice, Thanks

  • 10000 records resultset giving problem

    Hello All, I am using oracle database, windows 2000, OC4J(Oracle Containers for j2ee) Application Server. When I query a emp table which has 100000 records and store the 100000 records in resultset and using a while loop if I iterates through the res

  • Save all open files?

    Is there a way or a script to save all open files in Adobe Illustrator? Thanks