Connecting more than one tv how do u do that

in the instalation guide it tells us we can conect up to four tv's to the vision box can anyone tell me how to do this i could in real terms use a diagram if possible of how to connect up as i am completely in the dark with this

Eh? Does it? The black box has no RF out so you can only connect one telly (the silver box can be connected to another box via the RF.
I think you might have misread the instructions, as you can connect four things to the hub, PS3, Smart TV etc.

Similar Messages

  • Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

    Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

    Looks nice!
    I understand what you've done now. You used the "Set Layer Visibility" command which sets the on/off state of all the layers at once. What you need is a more subtle approach, one that will only change the state of the specific layer associated with the button, not the rest of them (so that you could have multiple layers enabled at the same time). The way to do that is by using a script.
    I wrote the script for you and applied it to the top-left counties (WILLIAMS and FULTON), in the attached file. You can now copy the actions I associated with those buttons to the rest of them, and it should work as you want it to.
    The file: MAP-HHA-Geographic(3)_edited.pdf - Google Drive

  • Buying in more than one country, how do I do that?

    I live in both the US and Germany. My appleid is US based, but I want to buy songs while I am in Germany.  I am currently on the German network, but iTunes tells me the song is not available in the US.

    I found the answer.  Sorry, I am new to the forum and did not see originally how to look it up. Please disregard the question.

  • How can i connect more  than one database

    i would like to connect more than one database one my laptop
    now i have database one and sid=ddms
    and i would another such as sid=ddmf
    how can i connect two database on the same my laptop

    I am not sure what you mean by after built? Are you trying to export data from one database and import it into another? If so, export it using data pump making sure you have the correct ORACLE_SID. Also be sure both database have to same character set. Then change the ORACLE_SID to other database, and run data pump to import the data into the other database. Hope that makes any sense...

  • HT204368 How do I connect more than one Bluetooth enabled music device (subwoofer and Jambox) to my iPad at the same time?

    How do I connect more than one Bluetooth enabled music player (subwoofer and Jambox) to my iPad at the same time?

    You could start by posting onto an iPod forum instead of a "Using iPad" forum.  

  • Connecting more than one ipod to one mac computer

    Can anyone please advise me on how I can connect more than one ipod to just the one mac computer. I need to set up 3 ipods to work on the one mac computer but each with there own itunes library. thanks

    When the iPods belong to two users, there are a couple of recommended methods for using more than one iPod on a single computer. Method one is to have individual Mac or Windows user accounts which by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. Each iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists.
    Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. Have a look at this article and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
    Another option when using a single library is to set one or both of the iPods to manual update: Managing content manually on iPod
    Choosing the update option "automatically update selected playlists only" (called Sync Music - Selected playlists in iTunes 7) allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes

  • Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

    Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
    So only one imac, only one ipad..and so on simultain.
    More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
    I need to disconnect one device to have internet on the second one from the same type!
    Could somebody help me?
    Many Thnaks,
    dan

    If your network configuration is:
    Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
    AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
    Modem/Router Power ReCycling
    - Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    Perform a "hard" reset of the AEBS.
    - (ref: http://docs.info.apple.com/article.html?artnum=107451)
    Setup the AEBS
    With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
    AirPort tab (optional)
    - Create a closed network (checked)
    Change Wireless Security
    - Wireless Security: WPA Personal
    Base Station Options - WAN Ethernet Port
    - Enable SNMP Access (unchecked)
    - Enable Remote Configuration (unchecked)
    - Enable Remote Printer Access (unchecked)
    Wireless Options
    - Transmitter Power: 10%
    Access Control tab (optional)
    - + <add the computer(s) that will access this wireless network>

  • Can't connect more than one device.

    I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
    Appreciate any help!

    Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
    A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
    Power up the AirPort Express and let it run a few minutes.
    Hold in the reset button on the Express for 10 seconds
    Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
    If the Express is operating correctly, it will be back to factory default settings at this time.
    If you try the reset a few times and the Express will not return to default settings, the Express is defective.

  • Connect more than one computer to a time capsule volume?

    Hello. I am considering buying an old time capsule (500G, 2nd generation) as a little in-house server to store data that need to be accessible for more than one work station. Is it possible to connect more than one work station to one time capsule?
    Thanks

    While it is possible to connect more than one computer to the Time Capsule......I would not recommend that you buy the Time Capsule that you are looking at.....unless you know that the owner has replaced the hard drive and power supply.
    Most of these models never made it much past a few years of operation, so if this is an "original", you have a hint of what will happen not long after you purchase the product.

  • How is it possible to connect more than one SAP R/3 4.6c System to TREX 6.1

    Hi,
    I'm using SAP TREX 6.1 together with an 4.6c System. Now I want to connect the TREX to more than one R/3 System, so that every R/3 System has got its own Index-Category on the TREX Host.
    Does somebody know what I have to enter in the ini files -->TREXRfcServer.ini and in the TREXDaemon.ini? Perhaps there are some other important things that have to be considered at the usage of TREX 6.1 with 2 or more connected SAP R/3 Systems?!
    I would be happy about every helpful answer!
    greetings,
    Chris
    Message was edited by:
            Christian Blatt

    Hi Edmond Wong,
    Follow the steps below and you should be able to connect via SAP Logon Ticket.
    1. Set your system definition in portal to read SAPLOGONTICKETS.
    2. Go to your R3 server and execute transaction SM30, maintain table view TWPSSO2ACL
    3. Create a new entry with your portal ID and client info. Subject name and Issuer name is extracted from your portal Key Administration under DN of Owner and DN or Issuer. Remember to enter your serial number (normally oo if you only have one portal instance on your server)save this entry.
    4. Next download your portal certificate in der format from your Key Administration page. Unzip the file and you should have a verify.der certificate.
    5. Execute STRUSTSSO2 in R3, import your verify.der certificate into R3, then click on add to certificate list, also click on add to ACL list. Save entry.
    6 As for ITS, all you need is to add the parameter ~myssocookies2 = 1, restart your ITS.
    7. remember to remove your user mapping befor testing the connectivity.
    Drop me an email should you have problems. [email protected]
    Ta!
    Fred

  • Connecting more than one ipod to itunes

    Hi there,
    I am new to these ipods and for the life of me can't figure out how to have more than one ipod connecting to the same itune acct. Can anyone help?

    hiya!
    these resources might be of some help with going multipod:
    Natalie Beresford: multiple iPod/iTunes installations
    How to use multiple iPods with one computer
    iTunes: How to share music between different accounts on a single computer
    love, b

  • If I have more than one library, how can I upload all photos to iCloud??

    I have a couple of different iPhoto libraries. Now that I've upgraded to photos, I am using iCloud and it is currently uploading all the photos & videos from the library Initally opened. How can I upload the other libraries into iCloud?  Will they automatically upload once I use the option key and open the different library?? 
    Also, does Photos need to be running for things to upload to iCloud?
    Thanks!
    Kristin

    See the quote below from Designate a System Photo Library in Photos - Apple Support
    iCloud and the System Photo Library
    You can use iCloud Photo Library, iCloud Photo Sharing, and My Photo Stream only with the System Photo Library. If you choose a different library in Photos without designating it as the System Photo Library, the iCloud tab in Photos preferences is disabled:
    If you designate a new library as the System Photo Library and then turn on iCloud Photo Library, the photos and videos in the new library will merge with those already in your iCloud Photo Library. If you want to keep the contents of your photo libraries separate, don’t turn on iCloud Photo Library for more than one library in Photos.

  • Why won't my Time Capsule allow me to connect more than one device to the network at a time?

    Ok here is the shortest story I can come up with...
    Several months ago lightening struck my house and ruined the power cord for my old AIR PORT EXTREME....after replacing the power cable my wireless network began to prohibit more than one device at a time to connect to the wireless network.
    I replaced that network with a new TIME CAPSULE and it is doing the same thing.  I took my old AirPort Extreme to my work and it works like a charm.  My ISP says it is an Apple problem but I have had the same settings both at home and at work.  Work is great, multiple devices connect but home is one at a time and in order to connect ANOTHER device I have to power down one, and reboot the router and fire up the device I wish to connect.
    Any suggestions?

    I am running off a Fiber line....the unit that is a battery back up and appears to be a modem as well is called CyberPower CS24U12V-NA3
    Techincally, there is no "router" in my house, there is a LOCKED control box outside, a battery back up module in the garage that shows battery life and connection, then a cat5 outlet in my laundry room..All of which was installed by my ISP.
    I am using a 2TB Time Capsule running DHCP in Bridge Mode.  I can't find the software version but updated it while installing it within the last two months.
    Under Network Tab
    Enable NAT Port mapping is checked
    Under the Wireless Tab
    we have a 5ghz Network
    Radio mode is set to:  802.11a/n-802.11b/g/n (Automatic)
    2.4 GHz is Auto
    5 Ghz is Auto
    I hope this helps....

  • Connect more than one R/3 4.6c System with SAP TREX 6.1

    Hi,
    I'm using SAP TREX 6.1 together with an 4.6c System. Now I want to connect the TREX to more than one R/3 System, so that every R/3 System has got its own Index-Category on the TREX Host.
    Does somebody know what I have to enter in the ini files -->TREXRfcServer.ini and in the TREXDaemon.ini? Perhaps there are some other important things that have to be considered at the usage of TREX 6.1 with 2 or more connected SAP R/3 Systems?!
    I would be happy about every helpful answer!
    greetings,
    Chris

    Hi Edmond Wong,
    Follow the steps below and you should be able to connect via SAP Logon Ticket.
    1. Set your system definition in portal to read SAPLOGONTICKETS.
    2. Go to your R3 server and execute transaction SM30, maintain table view TWPSSO2ACL
    3. Create a new entry with your portal ID and client info. Subject name and Issuer name is extracted from your portal Key Administration under DN of Owner and DN or Issuer. Remember to enter your serial number (normally oo if you only have one portal instance on your server)save this entry.
    4. Next download your portal certificate in der format from your Key Administration page. Unzip the file and you should have a verify.der certificate.
    5. Execute STRUSTSSO2 in R3, import your verify.der certificate into R3, then click on add to certificate list, also click on add to ACL list. Save entry.
    6 As for ITS, all you need is to add the parameter ~myssocookies2 = 1, restart your ITS.
    7. remember to remove your user mapping befor testing the connectivity.
    Drop me an email should you have problems. [email protected]
    Ta!
    Fred

  • CS3: Table on more than one page - How can I get the UIDRef's of the pages?

    Hi
    I have a table over more than one page. How can I get all UIDRef's of the pages who contain parts of the table?
    Thanks
    Hans

    Hi
    Thanks for the answer.
    - How can I get all page items of a table?
    - One other question: If I have a table over two pages (side by side) there is only one page item of the table. Right? How can I get the two pages (UIDRef) in that case?
    Thanks
    Hans

Maybe you are looking for