Connect to internet sharing via nintendo ds

So I am trying to connect a nintendo DS to my macs internet sharing twhich is coming from ethernet and being shared to computers using wi-fi
I found these online and followed the steps
Turn on Internet Sharing:
Go to System Preferences, click on the Sharing icon, then click on the Internet tab.
Change the Share your connection from: pop-up to 'Built-in Ethernet.'
Under the To computers using section, check the AirPort box.
Click Airport options...Enter an easy name such as nds. Leave all the security options blank -- implementing security is an exercise left to the reader -- then click OK.
Click Start in the Internet Sharing panel.
For sharing internet access with other computers, this is usually sufficient. However, the DS doesn't play well with the built-in DHCP server, so we have to manually configure the DS. To do this we, must gather some info...
Gather Information:
Open Terminal.app and type ifconfig en1. In the output...
Look for: inet xxx.xxx.xxx.xxx netmask ...
Take note the IP Address (the x's) associated with the first inet (mine was 10.0.2.1; yours may be different).
Type dig. Near the bottom of this output will be SERVER: followed by an IP address. This will be the DNS server you will use for your DS.
Configure the DS:
Edit your Nintendo Wi-Fi Connection Settings from within a compatible game.
Select a connection to edit.
Choose Manual Setup.
Enter the following parameters:
SSID: nds (or whatever you chose in step one)
Auto-obtain IP Address: No
IP Address: Take the first IP Address you obtained earlier, and make the last digit bigger. i.e., mine could be 10.0.2.4
Subnet mask: 255.255.255.0
Gateway: The first IP Address, unchanged. (e.g. 10.0.2.1)
Auto-obtain DNS: No
Primary DNS: your DNS SERVER from the earlier dig output.
Test your connection at the top of the screen. You should have no problem connecting.
That's it, now just have fun!
I followed them exactly and when typing in ifconfig en1 I get this:
Router:~ connorwillimas$ ifconfig en1
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
  ether 7c:d1:c3:6b:bc:38
  inet 10.2.31.28 netmask 0xfffff000 broadcast 10.2.31.255
  media: autoselect
  status: active
then I typed dig ad got this:
; <<>> DiG 9.8.5-P1 <<>>
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 50348
;; flags: qr rd ra; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 8
;; QUESTION SECTION:
;. IN NS
;; ANSWER SECTION:
. 26589 IN NS e.root-servers.net.
. 26589 IN NS b.root-servers.net.
. 26589 IN NS j.root-servers.net.
. 26589 IN NS a.root-servers.net.
. 26589 IN NS g.root-servers.net.
. 26589 IN NS l.root-servers.net.
. 26589 IN NS f.root-servers.net.
. 26589 IN NS m.root-servers.net.
. 26589 IN NS i.root-servers.net.
. 26589 IN NS c.root-servers.net.
. 26589 IN NS h.root-servers.net.
. 26589 IN NS k.root-servers.net.
. 26589 IN NS d.root-servers.net.
;; ADDITIONAL SECTION:
e.root-servers.net. 86400 IN A 192.203.230.10
a.root-servers.net. 54665 IN A 198.41.0.4
m.root-servers.net. 82738 IN A 202.12.27.33
i.root-servers.net. 83172 IN A 192.36.148.17
c.root-servers.net. 83415 IN A 192.33.4.12
h.root-servers.net. 84419 IN A 128.63.2.53
k.root-servers.net. 85418 IN A 193.0.14.129
d.root-servers.net. 85582 IN A 199.7.91.13
;; Query time: 21 msec
;; SERVER: 10.0.0.3#53(10.0.0.3)
;; WHEN: Sat Oct 19 20:41:19 EDT 2013
;; MSG SIZE  rcvd: 369
I entered all the information correctly into my DS and then I get error code 51300 and when the ds says testing connection there is no signal strength in the top right corner but when i found the connection using the find an access point it shows that there is full signal strength. How can i get the DS to realze there is a signal strength when i do this manually or automatically?

The iPhone does not support tethering - at the present time anyway, which means using the iPhone as a modem for internet access with a computer, and the same in reverse - using a computer's internet connection to connect to the internet with the iPhone.

Similar Messages

  • Screen-Sharing and Internet-Sharing via same network connection

    Hello out there,
    I'm using a TiBook (G4 867MHz) and a MacBook Pro 17". They are connected via a WLAN-router. Additionally the MBP is connected to the internet via an UMTS-connection established with a Merlin 870XU type PC-card.
    Network is working fine, including screen-sharing. Also the internet connection on MBP works without error. But if I activate Internet-Sharing via WLAN to get my TiBook connected to the internet, the MBP connection to the WLAN is cut off.
    Can somebody tell me what's going wrong and how to solve it?
    Greetings from good old Germany
    Ansgar

    Hello out there,
    I'm using a TiBook (G4 867MHz) and a MacBook Pro 17". They are connected via a WLAN-router. Additionally the MBP is connected to the internet via an UMTS-connection established with a Merlin 870XU type PC-card.
    Network is working fine, including screen-sharing. Also the internet connection on MBP works without error. But if I activate Internet-Sharing via WLAN to get my TiBook connected to the internet, the MBP connection to the WLAN is cut off.
    Can somebody tell me what's going wrong and how to solve it?
    Greetings from good old Germany
    Ansgar

  • Internet Sharing via Firewire

    I am trying to use my Intel iMac (10.5.7) as a gateway computer and connect my eMac (10.4.11) to it via Firewire to access the internet. (My router is faulty) I am able to share files successfully between both computers using the Firewire cable, but I cannot get the eMac to access the internet from the iMac. I have the iMac set up for sharing but the eMac cannot access the internet this way. I have followed the steps described in the Missing Manual but the Network page on the eMac doesn't allow me to click "Apply Now" because the button is grayed out. I suspect some of the boxes need some information entered, but I don't know what.
    Any suggestions gratefully received.
    Robin.

    Noah,
    Well, yes, replacing the router is the obvious solution. I had stopped using the suspect router to see if it was the cause of my connection dropouts. While I was conducting this experiment I thought I would try out the Firewire connection for Internet sharing, just for fun. Since I have had a trouble free connection since I removed the router I think I have isolated the cause of the problem.
    What has puzzled me is why did internet sharing work with the eMac as the gateway computer, but not the other way around with the iMac as the gateway computer. Anyway, it is rather academic as I will probably replace the router, if Netgear cannot suggest a trouble free configuration.
    Thanks for your reply.
    Robin.

  • Internet sharing via airport doesn´t work

    Hello to everybody,
    my problem is, when I do internet sharing via Airport on my imac (OSX 10.6.8) so I can use my ipad for surfing. The connection establishes for a short time and then it breaks down. Once in a while I can reconnect, but it´s constantly breaking.
    I know, this problem is posted a million times, but it still seems not to be solved (or I didn´t find the right thread with the solution).
    Bthw. I phoned the apple support. They wanted to charge € 49,--. Now I´m quite mad at apple. This *****. They are having a problem with their software and they want to charge me? That´s incredible. I can´t understand what´s the hype about apple. Such an awfull bad support they´re giving (or not giving at all).

    OK. To your information. Today I tried the following: I switched off and on internet sharing twice after boot and voila, wifi seems to work fine. Yeah, that´s what I call a sophisticated computer system. Really crappy stuff!

  • Internet sharing via dongle, how to set password for wifi network created?

    I am using a USB dongle with my Mac book Pro to share internet through AirPort, so that i can access my mac book's wifi from my iphone. This works great, but it is an open network and I woud like to set up a password.
    If anyone can point me in the direction I would be very grateful!
    Thanks

    If you are using OS X's Internet Sharing feature, then you can configure wireless security on your Mac's internal AirPort Card but are limited by the OS X version that you are using. It was not until Mountain Lion that Apple provided WPA2 security. Prior to this only WEP was available.
    You configure Internet Sharing via System Preferences > Sharing > Internet Sharing. (I don't have 10.6.x on any of my Macs so this may be different for your case.) Once you configure what is shared, you can then add wireless encryption.

  • Can't connect to internet sharing

    Ever since updating to Mountain Lion on my iMac, I can't connect to internet sharing with my iPad 3.    Does anyone know how to get it to work?  I just get the message 'Unable to join the network 'xxxx'.
    I've tried setting up new networks, I've tried it with and without passwords, restarted both machines, and it still won't work. 
    However, my iphone4 connects OK.  Anyone else having this issue with the iPad 3?
    Thanks
    Bob

    It's so simple to setup and you have been using it in the past, but just in case, this is Apple' kb article about Internet sharing with Mountain Lion.
    http://support.apple.com/kb/PH10740?viewlocale=en_US
    Have you rebooted your router or cable modem? Unplug it from power for about 30 seconds and plug it in again.
    You might be better off posting in the Mountain Lion forum if you haven't already done so.
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion

  • Connect to internet, not via 3G, but via bluetooth network connection

    I am considering buying this iphone,
    and there are many options I can use to connect internet.
    so can an iphone connect to internet, neither via 3G nor via wi-fi, but via bluetooth network connection?

    The iPhone does not support tethering - at the present time anyway, which means using the iPhone as a modem for internet access with a computer, and the same in reverse - using a computer's internet connection to connect to the internet with the iPhone.

  • Windows 7 wont connect to Lion Internet Sharing via Wifi

    I have a 2011 Macbook Pro 15" with i7. I know the internet sharing feature works, because I used the wifi internet sharing with a Macbook Air and that worked fine. But when I try to connect from a Windows 7 Ultimate laptop, the connection cannot be established. I tried:
    Changing the Wireless Name
    Changing the encryption key
    Tried no encryption key
    Rebooted
    Am I missing someting? Am I correct to assume that the built in internet sharing allows you to connect your devices to macbook pro as a router? I appreciate your assistance, thanks!

    Same here.
    I have all my machines (rather HAD) connected to the internet via a shared single connection through a 3G dongle (welcome to the countryside). I made the mistake of upgrading my machine to Lion only to realise a couple of days later that all the other machines had been starved of internet access.
    Now only my main machine has access, even though according to all of my thousands worth of apple gear the green lights are on and all is ok. The Airport extreme says it's connected, its lying. The Timecapsule says its connected, its lying. The Mac mini says its connected, its actually admits there is a problem when you run the network diagnostics. Same for our macbook pro. At least the Windows machine says it's connected but no internet.
    This is pathetic as apple have know there was an issue since june last year. Once more I get the feeliing Apple couldn't give a fiddlers'. Most likely greedily eyeing the forthcoming cash bonanza from the ipad 3.

  • Connecting my Powerbook to my iMac for internet sharing via airport

    Thanks in advance for any help.
    I have given up trying to get an answer to my Airport problem and NTL Virgin.
    I now have my iMac connected to web via ethernet all okay for a week now so it can't be my connection that was the problem.
    I need to connect my PowerBook to the internet now at the same time. I would obviously like to do this using wireless technology. I was hoping to web share my iMacs connection via the airport cards on both macs but seem to be struggling.
    I can set up a new network on the iMac and get the PowerBook to see it but it won't connect to the internet.
    Any advice would be great thanks

    To setup for Internet Sharing (Wired to Wireless):
    Setup the Network
    Internet Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > PowerBook
    Enable Software Firewall - iMac
    System Preferences > Security > Firewall
    o Block all incoming connections (enabled)
    Enable Internet Sharing - iMac
    System Preferences > Sharing
    o Select "Internet Sharing" from the options in the left column
    o Share your connection from: Built-in Ethernet
    o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    AirPort Options...
    o Network Name: <anything you want>
    o Channel: Automatic
    o Enable encryption (using WEP) (optional)
    o Password: (optional)
    o Confirm Password: (optional)
    o WEP Key Length: (optional)
    o Click OK
    o Select "Internet Sharing" again
    o Click "Start" to start Internet Sharing
    o Click Start

  • Turning on Internet Sharing via Airport disrupts internet connection!

    I have a very strange problem.
    My iMac G5 (10.4.10) is connected to broadband via an Ethernet cable. Everything works perfectly, Google Earth works, emails come through, internet downloads are perfect...
    BUT!!
    When I turn on my Internet Sharing to share my Ethernet connection via my Airport connection (to let my husband surf the net on his PC) all **** breaks loose on my Mac.
    Google Earth does not function properly, all internet downloads (.dmg) come up with "codec overrun errors", all images sent via email downloaded through Entourage are corrupted, the list is endless. I have to turn off my Internet Sharing, turn off Airport, and then everything returns to normal again.
    Why is this, and can someone help stop the fights my Husband and I are having when it comes to sharing the Broadband connection through my Mac - I don't want to because my Mac goes crazy!
    Ta muchly!!!

    Sorry but an Ethernet hub will NOT properly share the ISP connection. The ISP only gives you a single IP address. If you use a hub (or Ethernet switch), the first computer you turn on will win and get the only IP address. The other computer will not be able to connect.
    To properly share the connection, you need to get a router. The router uses the single public IP address provided by your ISP and creates multiple local IP addresses for your computers.

  • IPhone 3Gs, Mac Pro Internet sharing via Airport connection problems

    Hi, I have internet sharing turned on in my Mac Pro for the Airport connection and it works very well with laptops, but I have trouble getting my iphone 3gs to connect to it sometimes.
    restarting the iphones does not help
    stopping and starting the airport does not help
    I can restart the Mac Pro, but that can be a pain, but does usually allow be to connect again for awhile...

    I've been having the same problems as everyone else here. Trying to share internet connection from my ethernet wired iMac to my MacBook and my iPhone. Tried all the workarounds, but nothing works, or lasts very long.
    Yesterday, I finally talked with AppleCare for over an hour. All their suggestions (trashing preferences, changing settings, etc.) failed, as well. The AppleCare person then put me on hold to speak to an engineer, who told her that Snow Leopard no longer supports Internet Sharing as of 10.6.1.
    Not willing to accept that answer, I had them set up an appointment at the Apple Store Genius Bar for me, and after chatting with the Genius for a while, he also confirmed that Internet Sharing is no longer supported under Snow Leopard. Apparently, there were many hardware issues that the engineers decided to circumvent, and so did not include support for Internet Sharing with the internal airport in Macs. They said that the Airport it is intended to receive, not to send a signals! Yet, it worked fine, doing just that, under Tiger and Leopard! The only fix he could offer was to wipe my drive and take me back to 10.5, which I declined.
    However both the guy at the Genius Bar and the lady at AppleCare inferred that Apple "may" release another update to fix this issue, if they get enough complaints and bug reports.
    So, there you have it. Apple no longer officially supports Internet Sharing in Snow Leopard.

  • Internet Sharing via USB Wifi Dongle?

    I just acquired a first gen Mini (1.25Ghz, 1GB RAM) with no Airport built in. I was able to add wireless to it via a Ralink 802.11n USB dongle. Here's my question:
    Can I connect the Mini to the internet via ethernet and then use the USB dongle to share the connection with other Macs in my house?
    I currently have an old PowerMac G4 acting as a server/wireless router. (Ethernet in to give it a real IP address for easy access from anywhere. Airport out to give internet access to my MacBook Pro.) It's a great setup, and serves me well (no pun intended), but if I could get the Mini to take its place, it would save me room.
    Anyone know how to get one of these USB Wifi dongles to share out internets?
    Thanks in advance for any thoughts.
    SJ (no, not that SJ)

    Can I connect the Mini to the internet via ethernet and then use the USB dongle to share the connection with other Macs in my house?
    I don't have a USB wireless adapter, but I believe in order for this to work, you would have to be able to select it when attempting to configure Internet Sharing.
    Does this USB adapter show up in the list of network devices under the Network panel in System Preferences? If it does, go to the Sharing panel. From this panel, select Internet Sharing; choose the USB adapter for the "Share your connection from" list, and then, choose "To computers using" = "Ethernet."

  • IPhone - OSX 10.5.6 internet sharing via wifi has packet loss

    I try to access the web on the iPhone (for testing purposes) via the bult-in internet sharing capability of my MacBookPro via WiFi. I get very slow connections and high packet loss on distances of less than a foot.
    If I activate Internet sharing (eth0 - AirPort) I have packet loss of up to 80% on a Ping to the iPhone. This results in an unusable connection. In this case the iPhone gets a DHCP address from the DSL box (10.0.2.2). Pay attention to the HUGE standard deviation of the packets in case of the internet sharing!!
    If anyone has config hints, I appreciate that very much. Does anyone know how to bridge en0 to Airport with WEP enabled?
    Internet sharing activated:
    --- 10.0.2.2 ping statistics ---
    202 packets transmitted, 150 packets received, 25% packet loss
    round-trip min/avg/max/stddev = 18.312/1768.538/8198.289/2201.202 ms
    If I set up a Computer-Computer network with a WEP password I get no packet loss, but of course I cannot access the internet that way because there is no way in preferences to bridge the networks.
    --- 169.254.246.154 ping statistics ---
    443 packets transmitted, 442 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 1.441/1.983/57.068/2.691 ms
    Internet Sharing (ifconfig):
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21b:63ff:fe92:d74%en0 prefixlen 64 scopeid 0x4
    inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255
    ether 00:1b:63:92:0d:74
    media: autoselect (100baseTX <full-duplex,flow-control>) status: active
    supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
    fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
    lladdr 00:1b:63:ff:fe:77:99:ac
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21b:63ff:fec1:e75b%en1 prefixlen 64 scopeid 0x6
    inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
    inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255
    ether 00:1b:63:c1:e7:5b
    media: autoselect status: active
    supported media: autoselect
    en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
    inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
    ether 00:1c:42:00:00:00
    media: autoselect status: active
    supported media: autoselect
    en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
    inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:1c:42:00:00:01
    media: autoselect status: active
    supported media: autoselect
    C-C Network:
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21b:63ff:fe92:d74%en0 prefixlen 64 scopeid 0x4
    inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255
    ether 00:1b:63:92:0d:74
    media: autoselect (100baseTX <full-duplex,flow-control>) status: active
    supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
    fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
    lladdr 00:1b:63:ff:fe:77:99:ac
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21b:63ff:fec1:e75b%en1 prefixlen 64 scopeid 0x6
    inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
    inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255
    ether 00:1b:63:c1:e7:5b
    media: autoselect status: active
    supported media: autoselect
    en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
    inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
    ether 00:1c:42:00:00:00
    media: autoselect status: active
    supported media: autoselect
    en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
    inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:1c:42:00:00:01
    media: autoselect status: active
    supported media: autoselect

    I accidentally found a workaround:
    1. Activate internet sharing
    2. Goto network preferences and use AirPort: "Create network ..."
    3. Check require Password and create a C2C network
    4. The Airport Icon changes from the up-arrow to the computer icon
    5. Connect with the iPhone.
    Packet loss is gone and sharing works fine.
    BIG BUG: Procedure has to be repeated every time AirPort is turned on/off, as Internet Sharing disables/resets the airport setup!

  • Can't do Internet Sharing via Airport, laptop PC to iMac

    Help! I'm trying to connect a Windows laptop to my Mac via AirPort to do Internet Sharing. I have Internet Sharing turned on and AirPort is on.
    The laptop PC can see the Mac, but it has a red X and the following message:
    "The settings saved on this computer for the network do not match the requirements of the network."

    I'm finding, after working at it for a while, that "Frank's Computer" shows up as an ad hoc network on the laptop PC and the wireless connection is solid, but Internet Sharing still isn't working. Is there a distinction between ad hoc networks and Internet Sharing? Could it not be working because an ad hoc setting has been made and Airport can't do two things at once?

  • Internet sharing via smartphone with USB

    Hi,
    I would like to use my smartphone HTC S730 which has a flat fee 3G internet connection to act as modem for my MacBookPro. This way I don't need a seperate datacard for my laptop and, when using USB my smartphone's battery is charged too.
    BUT, Leopard > system preferences > internet sharing doesn't show USB (or Bluetooth) as option(s) for sharing. I have to choose Airport, Ethernet or Firewire. My smartphone cannot connect via one of these three options. iCentre store in Amsterdam couldn't answer my question. Any suggestions?
    thanx,
    Sam van Buuren.

    You're not going about it correctly. You want to use your smart phone as a modem. You need set up System Preferences>Network not to use internet sharing. Contact the manufacturer and/or your service provider. You may need a modem script.

Maybe you are looking for