Connecting to a rmiServer application running on one computer through modem

I am new to java and want to develop an application which is accessible by dialing in through modem.
The architecture i want to develop is a access database and a rmi server application on my home computer and that to be accessible through my laptop using connection by dialing in through modem.
In this way is it possible to access or will i have to have a URL and a web server also running on my home computer.
I shall be very thankfull for any help in this regard.

Hai,
no, you don't need a Webserver for RMI. RMI is independent and uses the rmiregistry as backgroud application, which will open the TCP Port for the communication with your client(s).
If you dial into your machine, your client will get also an IP Address, so you can access your server.
Normaly you also have to configure the Server-IP for Modem-Dialin - at Windows 2000 Server you can look into Routing & RAS for this IP.
In this case, you have to access to your RMI Server-App through this IP and the Port specified by you for miregistry.
Greetings,
Sascha

Similar Messages

Can i have two versions of OSX running on one computer

can i have two versions of OSX running on one computer?

Yes. The second one can be installed on an internal or external drive, but can't be one that the computer wouldn't be able to run if installed on the internal drive.
(63298)

Assistance with my script to find all opened windows (applications running) on remote computer

Hello,
I have the following script whereby I want to list all the running (opened) applications on a remote computer. It's a shared computer between two people who use the same generic ID. Before one RDP's into it, I thought it would be interesting
to see if any apps are opened before logging in.
Here is the code:
$cred = Get-Credential
Invoke-Command -ComputerName server123 {Get-Process *mail* | Where {$_.MainWindowHandle} | Select Name,MainWindowTitle} -Cred $cred
It works in that it asks for my credentials and runs without any error...but this script also does not display any running applications. I'm not sure what it should show. Perhaps I need to add a line of code to display what it found?
Another bit of info I would like to use in this script is to also confirm that the generic ID is logged in at the time I run this script. I could use the following bit of code:
get-wmiobject Win32_ComputerSystem -computername server123 | format-table -property username
But when I run this code I get an access denied message. I'm assuming I need to use the Get-Credential again from my first script, but I'm unsure how to use it in the get-wmiobject?
Any help you can provide would be greatly appreciated.
Thank you.

Ok...shifting gears again. Instead of running this remotely I'm thinking of running a scheduled task on the server and creating this .htm file. That way no one has to run and enter in credentials (and if entered wrong cause issues with locking
out the account). So, I've modified my script and confirmed that when I run it from Powershell when logged into the server, the results file correctly shows the logged in userid and the running applications (windows) I have opened.
But, when I run this same exact script from my task scheduler, the running applications piece is blank? The server I'm running this on is Windows Server 2008. I've tried running it from Task Scheduler using Powershell and from a .bat file that
calls my Powershell script. Both ways results in my .htm file not showing any applications running. Yet when I run the same script (either from Powershell or the .bat file) the .htm file correctly shows the running applications. My Task Scheduler
Job is using the same user id that I'm logged in with so there shouldn't be any permission issues with running from the task scheduler.
Here is my code:
$a = "<style>"
$a = $a + "BODY{background-color:peachpuff;}"
$a = $a + "TABLE{border-width: 1px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TH{border-width: 1px;padding: 0px;border-style: solid;border-color: black;background-color:thistle}"
$a = $a + "TD{border-width: 1px;padding: 0px;border-style: solid;border-color: black;background-color:PaleGoldenrod}"
$a = $a + "</style>"
get-wmiobject Win32_ComputerSystem | ConvertTo-HTML -head $a -body "<H2>Logged in UserID</H2>" -property username | Out-File C:\Powershell_Scripts\Test.htm ; Get-Process |where {$_.mainWindowTItle} |Select-Object name,mainwindowtitle | ConvertTo-HTML -head $a -body "<H2>Open Applications</H2>" | Out-File C:\Powershell_Scripts\Test.htm -Append
Can anyone tell me what might be the reason for the script running from the scheduled task having issues?
Thank you.

RE: How to have multiple application running under one server

          I have one server
          I have many application
          Question: Is it possible for me to have a weblogic properties file under each
          of this application.


If your question is whether you can run multiple instances of WebLogic
          (or multiple applications) on one server, the answer is yes. The only
          problem is, you must have a unique port for each of the servers to run
          on. I.e., they can not all run under port 80 which has obvious
          internet/network implications.
          This also means you have multiple weblogic.properties files etc. for
          each instance.
          We do this with WL5.1 on a Linux 2.4 kernel in developement to allow
          multiple developers run their own instance on one box.
          Dano
          Mettu Kumar <[email protected]> wrote in message news:<[email protected]>...
          > No if you are running single instance of wls.
          >
          > Kumar.
          >
          > Sonny wrote:
          >
          > > I have one server
          > > I have many application
          > > Question: Is it possible for me to have a weblogic properties file under each
          > > of this application.

Runtime Error with Multiple Applications running in one Ear.

I have the Coherence and Tangosol jar files loaded in my ear and the coherence-cache-config.xml in the classpath, if i add two web apps to this ear that use the same jars i get this error:
SRVE0026E: [Servlet Error]-[action]: java.lang.NoClassDefFoundError: com.tangosol.util.ConcurrentMap
but if i run the ear with either web app seperately - it works fine.
I know i have some kind of a configuration issue - i just don't know what.
Any help would be appreciated.
Thanks..

Hi,
what application server do you use, and where do you have the coherence.jar and tangosol.jar?
Best regards,
Robert

IBM Hard Drive Only Runs In One Computer

Hey guys,
I have a weird little problem with an IBM Travelstar hard drive. I am working on a Dell Latitude 400 for a friend. She wanted XP installed on her laptop, as it currently has some version of Fedora on it, and she dislikes Linux. However, her computer does not have a disc drive, floppy drive, or support for USB boot. So, I went on to Ebay, and bought a 2.5 to 3.5 IDE hard drive adapter, and went through the process of installing MS-DOS 7.1 to a spare drive, and using that to install XP. Sure enough, using my spare drive, everything worked smoothly. However, when I tried the same thing with her hard drive, none of my computers can find it. My Gateway 2000 cannot detect it, my A31 Thinkpad cannot detect it, and so on and so forth. Of course, when her hard drive is in her Dell, it runs fine.
I am wondering if maybe the hard drive is somehow 'locked in' to her computer...as I have experienced a similar problem with another hard drive that would only run in an I 1200 Thinkpad. The model number off the drive in question is IC25N010ATDA04-0. It has a manufacturing date of April 02. If anybody has any ideas, I would really like to hear them.
Thanks in advance,
- Nycto

Right, Windows cannot handle ext3. I am aware of this. I tried reformating the disc with one of my Kubuntu discs, and Kubuntu could not detect the hard drive. I couldn't detect the drive with Max Blast either. I have yet to try every computer in my house, but, thus far, regardless of operating system, the only computer that will can detect the drive is the Dell from which I pulled it. When I boot my Gateway 2000 with the laptop drive attached, the bios only recognizes the two CD-ROM drives and my primary hard drive. Even when the laptop drive is the only drive in the system, it fails to detect the drive. So I couldn't tell you if I could view the drive in Windows' Device Manager, as I can't even get Windows to boot with this drive connected. And, like I said, Kubuntu couldn't find the drive either.
I know my converters work, as I was able to successfully install Windows using the previously described method with an old Hitachi notebook drive I had lying around. Additionally, as I mentioned before, I have seen this once before with another IBM Travelstar...except that drive was only detected by an IBM Thinkpad 1200. Which is why I wondered if there was something built into the hard drive's firmware that locked it in to a particular computer or something. I've tried most of the obvious stuff...jumper settings, loose cables, etc, and yet I don't have any other computers that can detect the drive.
I'm tempted to solve my Windows XP installation by installing VMWare, or something similar, to the Dell, and then copying over an ISO of XP, and mounting it in a virtual drive and installing it that way...but this machine is so old, I doubt it's a good idea to run XP on top of Linux...

How do I compile Labview program so multiple instances run on one computer?

I would like to have the ability to run multiple instances of a single executable Labview program on the same computer. Is there an option I should set during compilation?

Do you need the multiple instances to communicate? If so, use the INI file settings and VI server to launch them into the same run time engine. These settings in your INI file may be of use.
server.tcp.enabled=true
hideRootWindow=true
server.tcp.port=nnnn
server.tcp.access="+localhost"
Make sure you use a unique port number. Launch your main VIs by first using Open Application Reference with the port in your INI file and "localhost" as the machine name. Then use this application reference to open your main VI using Open VI Reference. Run it using the Run method with Wait Until Done set to FALSE and Autodispose Ref set to TRUE. Make sure it has its front panel open before you close your launcher or the LabVIEW runtime engine will close (since you have the VI ref, you can do a slow poll on the execution state or front panel open/closed properties).
Be careful with shared VIs. Reentrancy and VI templates are your friends.
This account is no longer active. Contact ShadesOfGray for current posts and information.

How do you make a jmf application run on a computer without jmf installed?!

I can create a jar with a program i made using jmf. It works on my comp, but i realized tht it doesn't work on others computers because they don't have jmf installed. How do i incorperate the jmf in my jar so that it can run on any comp whether or not they have jmf installed.
Please help me asap, i really need to get this done.
Thank You

So here's some more info, Not only have i never used a mac before, I don't really know how to use one, and my girlfriend is at school pretty far away right now, shes not good with computers either. So i don't wanna have to resort to asking her to install jmf on her macbook. If i do have to do that i guess i could get her friend to help her out.
But i'd still rather get this problem fixed. How do i incorperate jmf with my program, so it runs on all computers. I checked the native folder in SipCommunicator 1 release 2 and 3, but its only one dll file called ShellLink.dll
I checked everywhere in both of the downloads and i couldn't find any other dlls.
I must be downloading the wrong thing....
I downloaded
SIP Communicator 1.0-alpha2 release: Generic installer for all OSs
and also
SIP Communicator 1.0-alpha3 nightly builds: Generic installer for all OSs, Java installation required
The reason i got the generic installer is because I have a vista, and i want to run this on a mac. I don't have or know any one living near me with a mac, so i need to be able to build it on my comp.

Address Book not syncing with one computer (through .mac)

I'm having difficulty syncing one of my computers through .mac. My desktop seems to interact fine with the online account, but I can't get the AddressBook info from .mac onto my laptop. I have tried all the syc settings in System Preferences and in the preferences menu in Address Book and they all say that I should be syncing. Is there something I am missing? As far as I can tell, both computers have the same settings. I'm wanting to be able to use my ipod touch with either computer, (and to have both computers have the same info as each other) . . .
Thanks for any help.

I just upgraded to Leopard and am having the same problem. Everything is syncing fine except the AB. I still see all my contacts up on .mac thank goodness, but nothing is coming down to my computer. I hope that they don't just disappear up on .mac as well!!!

Is it possible to connect 2 Creative Web Cameras to one computer?

Hi all.
I want to connect 2 Web cameras to one computer and see li've video in two windows simultaneously. I have bought 2 identical LabTec Web Cameras, and when I connect to both cameras simultaneously the both video streams freezes.
Does anybody have any experience connecting 2 identical Creative Web cameras to one computer? Can they stream simultaneously without freezing?
I am planning to buy 2 Creative WebCam NX Pro, can they stream simultaneously without freezing?
Im using Windows XP SP2 and USB 2.0.
Regards,
Hemmingsen

Thank you for your reply!
I have tried to connect to different Web cameras to the same PC - and that worked!
I have tried to connect to identical LabTec Web cameras to the same PC - and that did NOT work!
It looks like it could be a driver problem.
I am working on a litte robot project and in connection to that, I need two identical cameras simultaneously to take 2 pictures. I that way I can analyse the 2 pictures and calculate the distance to objects. But the two pictures MUST be as identical as possible - therefore I want to use 2 identical cameras.
I would like if anybody who has 2 identical Creative Web cameras could do this little test:
1) Connect 2 identical Creative Web cameras to 2 different USB controllers (WebCam NX Pro preferred)
2) Open "My computer"/"WebCam "
3) Open "My computer"/"WebCam 2"
4) Check that both windows shows li've video simultaneously
5) Reply the result and the camera model to me
I get bankrupt if I buy more cameras that I cannot use - so I hope anybody can help me.
Regards,
Hemmingsen
Message Edited by hemmingsen on 09-27-2005 05:31 PM

Connecting to more than one computer?

Anyone know if you can connect the iPod touch to more than one computer? I'm aware that you cannot use the Touch as a "hard drive", which is ridiculous, but I'll live. As far as connecting it to another computer, anyone know if it stays from mac to mac if it will work? I tried today (and it could be because there was no battery life) but it only was able to charge, no icon and didn't show up in itunes.
Thanks.

Ah, you need to have the latest version of iTunes...that's definitely something they should tell you!

Connecting iPod to more than one computer

Is it possible to connect a iPod Nano to more than one computer? I downloaded itunes on my home computer and set my ipod up just fine. Then i wanted to connect it to my office computer because i have a bunch of music on it that i would like to put on my ipod. Every time i try to connect to my office computer I get an error message "iTunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes.
Any ideas or information would be appreciated.

*Is it possible to connect a iPod Nano to more than one computer?*
Yes it is. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. In this mode you can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod
iPod 101: Fill 'er Up
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device. In that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod
*Every time i try to connect to my office computer I get an error message "iTunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes*.
Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section and try changing the drive letter allocated to the iPod in Windows:
iTunes has detected an iPod in recovery mode - Use iTunes to restore
Windows confuses iPod with network drive

Adding multiple IPods to one computer

I would like to connect more than one Ipod to my Itunes. Right now, the second Ipod has a discreet playlist, but I cannot set up playlists under it. Is there a way to have two Ipods with multiple discreet playists connected to one Itunes program running on one computer?

Are you trying to set up playlists within a playlist? That can't be done I'm afraid. You can choose to sync multiple playlists to the iPod but not create playlists within playlists: How to use multiple iPods with one computer

How can I test a RTP(send&receive) application on the same computer?

I an writing an application that lets one computer (A) sends a media file to another computer (B) and B receives it and play it.
But how can I test this application on the same computer
Eg.Transmitter: localhost 43000
Receiver: localhost 43000
It will retuen an error since the port number is alreeady used by another program.
I know if I test it on different computers, it should be fine, but how can I test it on the same computer?

JMStudio sends RTP packets from the same UDP port as the specified in the destination port, so you can't try it in the same computer. The examples provided in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html follow this rule aswell, but it's easy to modify it:
rtpMgrs[streamid]=RTPManager.newInstance();
localAddr = new SessionAddress( InetAddress.getLocalHost(),localDataPort);
//By deafault, in the examples, they use remote DataPort instead of localDataPort.
//You can specify localDataPort to any different free port number, or to
//SessionAddress.ANY_PORT if you don't mind the port number
remoteAddr = new SessionAddress(destIpAddr,remoteDataPort);
rtpMgrs[streamid].initialize(localAddr);
rtpMgrs[streamid].addTarget(remoteAddr);

Using more than one ipod on one computer and itunes

I have a iPod mini but share a computer with my sister who just got the lastest nano. Can I add her ipod to my computer while my mini is already on there? Can we share the itunes and import the same songs to our ipods? How does it work? I use Windows XP but don't want to go through the hassel of have to Itunes running off one computer.
Thanks so much for any help!!!!!!

Don't know what an iPod mini is. To answer your question about sharing computer. You can use the same library if you want. THere are many ways to do that just make sure to not have them both plugged in at the same time.
Te easiest way to share would be to use one user account. Both iPOds would get the same libary and music.
The next way is to have two different user accounts. Have the music in a shared folder and you can both use the dame music files but can have different playlist and ratings.

Connecting to a rmiServer application running on one computer through modem

Similar Messages

Maybe you are looking for