Connecting to home stereo

I want to connect my ipod to my home stereo reciever (Sony STR-DE935) but there are no aux input jacks on the reciever. It has jacks for MD, CD SAT, DAT, etc. How can I listen to my ipod through this reciever?

Ack. I am sorry it didn't work well. I've done it with a couple different receivers without problems. My guess is your Sony is more high end than mine and more finicky about input. I don't have any expereince with Air Tunes. I have had OK results with a Griffin iTrip. MIght work to play through an FM blank spot if you set the iPod close. Not sure.

Similar Messages

  • 20G iPOD freezes when connecting to home stereo and other components

    When i connect my iPOD to my home stereo through a docking station the iPOD buttons become disfunctional. it only plays one song and then it "shuts down". Not really shuts down because the iPOD is still on and as soon as i remove it from the docking station, it works fine again. Any ideas?

    "However, most of the cables I find use the headphone output. "
    Yep, thats fine, just get one of those!
    MiniJack (3.5mm; small headphone output) - L/R Cinch Audio Jack, as you say.

  • IPod Clas. 80GB - What kind of dock to connect to home stereo (Audio only)

    Hi Everyone,
    I've been reading all sorts of threads about problems people have been having with the iPod classic (80GB) and dock compatibility. Do you have any recommendations for docks that will actually work ($50-$100 range)? I'm not that technologically savvy. I'm looking for the following:
    *Dock to connect the iPod Classic 80GB to a home stereo/receiver
    *Audio only - _no video/TV views needed_
    *Charges the iPod while connected to the dock (without falling asleep as I hear they often do)
    *Remote control (not critical to have the remote but it would be nice to have one that performs minimal actions such as volume control, on/off, skip to next song, etc.
    Thanks so much for your help.

    I assume that the other Sound Blaster cards like the Audigy models also have a 3.5mm jack for digital input. Has anyone tried feeding a coax SPDIF signal into it's And if so, how did you make the connection?
    I am really stumped here. I bought the X-Fi specifically for use of its digital input capability. I would have gone with the next higher model which comes with the 5 /4" bay panel (and standard coax SPDIF jacks) but my PC does not have a 5.25" bay available.

  • Connecting my home stereo system to my macbook pro

    I want to connect my stereo system to my MacBook Pro in order to put some of my Pops old vinyl onto CD to play when out and about. Please can someone advise best option. Usual stereo phono out from the amp.
    Thanks
    Nii Naku

    Well, there are many options you can use. If you have a home stereo, with only two channels, you can go to radio shack and get a splitter cable, one with the red and black/white RCA connectors on one end, and then the 1/8th inch headphone connector on the other end, and then plug the RCA's into you stereo in the line out ports, and then the headphone into the line in on the MBP, and you are all set. You can even go into system prefs and sound under line in or recording, play the record and see what the MBP is registering for line in volume and adjust it to get the best sound.

  • Why lower audo levels when connecting to home stereo system

    I have connected an audio cable to the earphone output on the Nano.This cable has two RCA connectors that connect to the line-in of my home stereo system. It works fine except for one thing. The volume is lower than other sources that feed into a "line-in" input. To make things even across the system, is there some type of devise that will increase the output level of the headphone jack on the Nano? Or does using an Apple cable make any difference. I would think this little problem is just a case of the headphone output being of a lower output level than a "line-out" output.
    Thanks for suggestions.
    Lonnie
    Custom made PC   Windows XP Pro   1gig ram P4 4.06

    "I would think this little problem is just a case of the headphone output being of a lower output level than a "line-out" output."
    It is, which is why many people who want to do this use the iPod dock, which has a proper 'line out' socket.

  • Connect to Home Stereo -- bad sound

    I connected my iPod to my home stereo via RCA cables. The sound is horrible. I have tried turning down the volume on my iPod and up on the stereo, and that does not work. Then I tried the opposite, and that did not work either.
    The sound is very heavy on the bass, and does not change even when I adjust the settings on the iPod's EQ.
    Any tips for how to use your iPod on your home stereo?

    Thats your problem the phono jack should only be used by a turntable. The phono jack amplifies the input (don't ask me the exact tech details as I don't know) b4 it goes to the amp.
    Try a different input and you should be fine

  • Poor Sound Connected to Home Stereo

    I have a 30 GB 5th Gen Video iPod that I connected to my stereo via the headphone jack using the monster cables I bought at the Apple Store. The sounds is not good at all. It's night and day vs. a CD. Is this normal.

    Try getting the Apple Universal Dock; the Line Out port reportedly sounds better than the iPod headphone jack (although it really isn't Line Out, since you can adjust the volume with the Apple Remote). If possible use a 2-wire stereo mini-plug cable (or the Monster iTV Link cable which combines a stereo cable and an S-video cable) rather than a 3-wire AV mini-plug cable.

  • Trying to connect Airtunes to home stereo

    I'm afraid that I really have no idea of what I'm doing here....this is my situation -
    I have a G5 iMac in my home office connected via Airport Express to a DSL modem (and via USB to a printer on my desk). I also have a Sony VAIO notebook (Windows XP Pro SP2) with a Belkin 802.11g wireless notebook network card that I have connected wirelessly so it can access both the printer and my ADSL modem. No problems to date with that.
    I have a second Airport Express downstairs (ground floor) in the living room (my home office is on the first floor) that I have used to extend the wireless signal so my husband can connect his Mac mini and 12 inch Powerbook to the ADSL modem. His studio is across the courtyard from the living room on top of the garage (about 7 - 8 metres from the Airport Express in the living room). This works, too.
    My problem arises because I have tried to connect my home stereo in the living room to 'airtunes' on my G5 iMac by using a 'home stereo cable' that I bought from my local Apple dealer. It has a 3.5mm connector on one end and two RCA connectors on the other end. (I was told by my local Apple dealer that this would be 'dead easy').
    I plugged the 3.5mm connector into the Airport Express in the living room and connected the RCA connectors to my tuner/amplifier (it is an old Nakamichi RE-3). Nothing happens at all. Nothing shows up in iTunes (I'm running iTunes 6). My Apple shop said 'just plug into the Aux RCA connectors and then set your stereo to AUX' - could the problem be that my Aux connectors also say /video? The input options on the front of the machine are CD, Aux/Video, Tuner, Cassette player.
    Sorry to be so ignorant - perhaps my Stereo is just too old?
    Any help/suggestions would be gratefully accepted.
    Cheers
    Tricia

    A little bit of knowledge can be a dangerous thing..... :-(((
    I did some reading of the Help files and discovered a couple of basic things -
    1) I had to change Preferences in iTunes to look for remote speakers connected with Airtunes
    2) I had to change System Preferences/Firewall setting to check the iTunes Music Sharing box
    3) I had to remember to turn on the volume control for my stereo
    Result - I now have my iTunes music playing throughout the house because my stereo system (20 years old) is wired to the bedroom, bathroom and study...I love it
    Cheers
    Tricia

  • Can AirPort express be used for AirPlay with my home stereo, and to give my Xbox 360 a WIRED internet connection via ethernet, simultaneously?

    I am considering buying an airport but I am not sure if it will work how I would like it to.  I need it for two things.  The first would be to use for AirPlay with my home stereo.  The second would be to use as a way to give my Xbox 360 a WIRED internet connection via the ethernet port.  I would like to do these things simultaneously, rather than constantly changing the configuration and being limited to a single function each time I do so.
    Thanks!

    The 802.11n AirPort Express Base Station (AXn) can be configured as a wireless Ethernet bridge. In this configuration, it would join an existing wireless network and its Ethernet port would be enabled for a wired client, like your Xbox 360. This configuration would also support AirPlay simultaneously.

  • Trouble connecting Ipod touch to home stereo.

    Hello, I have an Ipod Touch 3rd gen.  I currently use it mostly in my car and I use a simple aux 3.5 mm jack from the itouch to my aux input on my car stereo to listen to music.  Works great.  Now, I have been trying to get my ipod to connect to either of my home stereo receivers without any luck.  I have a 3.5mm jack from the itouch going to 2 rca inputs on the back of the stereo.  When I try to get it to play, it sometimes will play but it is not loud at all and sounds very distorted.  I can sort of hear the music but the vocals are very quiet.   This happens on both of my home stereos.  I was thinking of getting another cable that goes from the 30 pin connector on the bottom to the 2 rca inputs.  Do you think this would be better?  Or do I not have something configured right with the itouch?  Its just weird that it works fine in my car but not with the home stereo.  Thanks for the input. 

    This may work since it includesd an audio out\http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=72
    This may also work since it included :
    Connect the dock to a stereo or speakers using a stereo audio cable to play music from iPod or iPhone."
    http://store.apple.com/us/product/MC746LL/A/apple-universal-dock?fnode=72

  • Connecting to a home stereo

    I connected my 5th generation ipod to my home stereo aux jacks with a monster icable. There is no sound when the ipod is playing, but there is still sound when I listen to the ipod with headphones. How can I fix this?

    Do you have the cable connect to the in audio sockets and not the out sockets of your stereo

  • Can I send music from Mac Mini to my home stereo via Bluetooth connection?

    I recently purchased a new Intel Mini with built in Bluetooth, and I wondering if I could use the Bluetooth transmitter to send iTunes music from the Mini to my home stereo system? If so, I assume that I would need to purchase a Bluetooth receiver of some sort to connect to the audio input on my stereo? Any ideas on which make/model of receiver would work with the Mini?

    Hi.
    Unfortunately, you cannot use the bluetooth module to transmit audio to your stereo.
    Why? Because Tiger does not support the A2DP bluetooth profile (Advanced Audio Distribution Profile), which is required to broadcast stereo audio over bluetooth.
    Apparently, Leopard will support this profile (you'll have to wait for its final specs).
    Meanwhile, there are a couple of wireless (wi-fi) options available, including the Apple Express with AirTunes.
    http://www.apple.com/airportexpress/
    MacMini G4 1.25GHz 1GB   Mac OS X (10.4.9)  

  • Connecting iPod to home stereo

    What are the best-sounding options to hook up my iPod to my home stereo? Is there a way to hook up my iPod to my home stereo via a digital connection (i.e. a coax or optical connection)? I have a high end home theater receiver with a very good D/A converters and would like to use the D/A converters in my receiver rather than those in the iPod or iPod docking station.

    Thanks for your suggestions! Both of those products look like they would do the trick.
    From the look of those 2 adapters I would guess that the signal that comes through the iPod dock connection has already been converted from digital to analog (that is unless the adapters have built in D/A converters, which I doubt). That being the case, it doesn't look as though it is possible to run a digital connection from the iPod to a receiver (although maybe it can be done from iTunes on my computer...?).
    Thanks again!

  • Connecting ipod nano 4G to home stereo

    How do I connect my new 8GB iPod nano to my home stereo system in order to hear music that's on my nano over my home system? What kind of cable do I need. A local electronics store sold me a cable that's supposed to have worked but it only has one jack on each end: one for the ipod and one for the aux jack on the stereo receiver. But I aux on the stereo has 2 jacks, one red and one white. Please help

    So you need a cable the 2 RCA connectors on that end and the stereo mini plug on the other for the iPod.

  • Adaptor To Connect Intel Imac To Home Stereo?

    It's been about five months that I've had my Intel Core Duo iMac sitting proudly on my desk. Question: Has anyone found a way to connect the audio outs to a standard home stereo? (No, I don't want 5.1, just good old 2 point stereo)...
    Thanks,
    Stu

    My friend we have all tried to tell you that you are mistaken with your ideas about the audio output jack of the Intel iMacs, but you don't want to believe us. The output port is both digital and analog. A regular mini plug cable activates the analog output. A mini plug on a Toslink cable activates the digital output. Yes there is a 1 to 2 mm gap that is always there. No neither Apple nor anyone else makes anything special because what they expect you to use is the regular old standard mini plugs.

Maybe you are looking for