Connecting to MS Access db located on FTP server
Hi,
I'm trying to query an ms Access database that is located on a remote FTP server, using JDBC:ODBC driver and experiencing some difficulties.
In early stages I was connecting to the db locally with connection string below:
private String connString = "jdbc:odbc:DRIVER=Microsoft Access Driver " + "(*.mdb);DBQ=C:/hdrive/testdb.mdb;{code} It was working fine so i assumed that connecting to the same database on a remote server would be as simple as changing the local path to the URL on server. {code}private String connString = "jdbc:odbc:DRIVER=Microsoft Access Driver " + "(*.mdb);DBQ=ftp://user:[email protected]/testdb.mdb;
Turns out I was wrong. Following error message returned when executing:
'(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
I would appreciate if anybody could give me few pointers or steps involved in getting my application to connect to this database.
Perhaps there is another way around this. I've done some research on the internet and I've read that you can have a script running on the webserver and send queries to it using SOAP. Has anybody had any experience in this? I'd appreciate if someone could point me where to start.Pretty sure I referenced one solution in that which was the rmi proxy driver.
And basically every web site that you visit, including this one, has implemented a web solution so obviously they exist and there are many variants.
A java one is J2EE containers of which you might look at tomcat.
Similar Messages
-
DW Procedures to connect to MS ACCESS database located on remote server
I am confused about the procedures within Dreamweaver CS3 to connect to a MS ACCESS database on a remoter server.
I am working through a tutorial book, "Dreamweaver 8 with ASP, Cold Fusion and PHP Training from the Source", but the instructions are unclear concerning the procedures to connect to a MS ACCESS database located on a remote server.
The book indicates that the server administration has to create the DSN for you and screen shots indicate that you will result in a list of DSNs to choose from when creating the connections .asp file.
I went through the procedures to create a connections .asp and resulting in a connection without and tables (of course) because I do not initially have any connection information from my remote site.
I have generated the required two lines of code as follows for my MS ACCESS database connection on my remote server:
'Database connection info and provider
strCon="Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&_
Server.MapPath("database\trans.mdb") & ";" &_
"User ID=xxx;Password=xxxxx"
The question that I have is:
How does this connection coding relate to the "connections/conn_newland.asp" file that was create within the Dreamweaver screens? How do I merge the ASP coding? The file (/connections/conn_newland.asp) generated within Dreamweaver is as follows:
<%
'FileName="Connection_odbc_conn_dsn.htm"
'Type="ADO"
'DesignationType="ADO"
'HTTP="true"
'Catelog=" "
'Schema
Dim MM_conn_newland_STRING
MM_conn_newland_STRINT = "dsn=newland;"
%>
Any advice would be appreciated. I know that this is simple but debugging an error from an ASP coding merge would be a "bear" to debug!I have not used MS Access myself (fortunately) but I believe it works much like the old, old way of achieving a multi-user database in FileMaker.
That is, it is not a true client-server database but more a peer-to-peer database and that each peer opens the same database file which is available to multiple user via file sharing. Therefore as elikness said it should just be a matter of putting the files on your Lion Server and then sharing that folder/volume using SMB sharing.
However one thing to be aware of, since MS Access is not a true client-server database I would imagine it uses record locking to manage simultaneous direct access to records in the same files. File or Record locking is something that has historically been a bit flakey when using Windows clients with a Mac file server (and probably vice versa).
While I am not proposing it as a solution to consider seriously, it is worth you knowing that FileMaker Pro is a database system that is available for both Mac and Windows and depending on how you configure things can be considered to stretch from a configuration very similar to MS Access at the low end all the way to a high-end MS SQL Server style setup at the top end. See http://www.filemaker.com for details.
There is also a a third-party tool available for migrating databases to or from FileMaker Pro and it can convert MS Access databases to FileMaker Pro see http://www.fmpromigrator.com/
You could use FileMaker Pro just on Windows machines if you wish. -
Connection refused Error while writing file to FTP server.
Hi All,
We got below error while writing file to FTP server. Any one have any idea on this?
sABCS_1.0_8e88588d4fb54ebd2ac7ef66c8421d52.tmp/writeEncryptedFile.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: Connection refused]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.Hmmm ...
Same issue as your post from three months' earlier?
Re: Error while putting file in sftp location. -
To access a file from FTP Server
Hi All,
I hav a requirement where i have to download a file from an FTP server(Windows based). I'm able to list all the files that are there in the current directory of the FTP server using the command 'LIST'. the required file is present in that list. But whenever i tried accessing that particular file, it is saying that the file is not found. I identified an open issue in this. When i tried to identify whether it is a directory or a file from the list which is returned by the command LIST , I observed that it is not identified as a file (Directory starts with d, File starts with '-' etc). Can any one help me in resolving this issue. it wud b gr8 if anyone gives me the code for this requirement.
Any help wud b appreciated.
Thnx in Advance
Anil.. that the file is not found. That would suggest that you are accessing it incorrectly.
-
Load Balancing FTP Server thru CSM using a single Client IP
Hello,
We have a need to load balance 3 FTP servers. These servers are reached only from a single client IP which is a database server. The FTP method that is being used is currently passive. Our configuration is currently unidirectional, ie, the FTP client (the one database server) sends to the VIP and the FTP Servers then talk directly back to the FTP client and the traffic does not go back through the CSM. The problem is that because FTP negotiates another port to talk on, we have to use sticky so that the connection is sent back to the original FTP server that sent the FTP data port to talk on. But, since we only have a single client IP that is ever used we are not load balancing appropriately across the FTP servers.
Traffic flow goes something like this, tcp port followed after colon as an example
1. FTP Client ----> VIP:21
2. CSM ---------> FTP Server:21
3. FTP Server --------> FTP Client(FTP server says come talk to me on port 1700)
4. FTP Client ---------> VIP:1700
5. CSM ---------> FTP Server:1700
6. FTP Server:1700 ---------> FTP Client
repeat steps 4 thru 6
Here's our hardware and software:
WS-X6066-SLB-APC running 4.2(2)
Config is as follows
module ContentSwitchingModule 9
ft group 101 vlan 9
priority 10
vlan 216 client
ip address 10.209.16.31 255.255.252.0
gateway 10.209.16.1
vlan 20 server
ip address 10.209.0.31 255.255.252.0
alias 10.209.0.11 255.255.252.0
probe ICMP1 icmp
interval 3
failed 3
receive 3
serverfarm FHEPRT
no nat server
no nat client
real 10.209.0.72
inservice
real 10.209.0.73
inservice
real 10.209.0.71
inservice
probe ICMP1
sticky 106 netmask 255.255.255.255 address source timeout 3
policy FHEPRT_POL1
sticky-group 106
serverfarm FHEPRT
vserver FHEPRT1
virtual 10.209.16.71 any
vlan 216
unidirectional
serverfarm FHEPRT
replicate csrp connection
no persistent rebalance
slb-policy FHEPRT_POL1
inserviceYou are missing "service ftp" config in the Vip definition. Try the following
vserver FHEPRT1
virtual 10.209.16.71 tcp ftp service ftp
Syed Iftekhar Ahmed -
Reading and transfering FTP server files
Hi Everybody,
I will be really thankful if anybody can guide me for following-
1. How to read/access a file on FTP server ?
2.How file on FTP sever can be downloaded on presentation server?
Thanks.Hi ,
Check Function Group SFTP from se80.
Check this post.
http://wiki.sdn.sap.com/wiki/display/ABAP/WorkingwithFTP+Server -
Finder connect to FTP server no write access
I've set up my own FTP server at home and have access through terminal by typing ftp "my address" and I can open a virtual machine and connect to my FTP server just fine with the access privileges I had set up but when i use finder to mount it as a volume I can't write to any directory. I get an error saying the volume is read only. Looking at the volume in finder it says I am connected to "my address" as ftp user (this is odd because this isn't the user name i logged in as)
I've tried all sorts of configuration options and as a last resort I connected through a VM so this is obviously a problem with OS X.
How can I get this working?CyberDuck and Transmit doesn't let me mount my FTP server as a volume (in /Volumes/FTPserver)
That's what I'm looking to do.
I'm trying to link my iTunes to an off site location, my new mac book air doesn't have enough space to hold everything. I can do it with an external drive and it work with a network drive. Getting off my own LAN I can read and play but updating apps doesn't work so great (this was using pogo plug) My upload speed is too slow to use Amazon S3 and I was trying to reduce costs by getting my dead desktop at home to do this for me rather then paying Amazon $20 a month. All I need is Finder to work with FTP transfers or a decent program that wont glitch out on an upload. -
OWB 11.2.0.1 SAP LOCATION: Problem with separate FTP Server connection
Hello,
hope somebody can help me. We are working on a BI Project by our Customer with a Exadata Machine.
The Goal of this project is to have the DWH on the Oracle Exadata machine.
At the Moment we have the Development System on a separate Server with OWB 11.1. and are to get stuck because we can't work with OWB 11.2 with the problem we have.
Separate for the coming Migration we set up for testing a machine with OWB 11.2.0.1 (Exadata is productiv system, so not available for testing)
The SAP System of the customer is on a separate physical Machine as the FTP Server.
The new possibility from the OWB 11.2 SAP Location allowed choose between different transport type, also for a separate FTP Server.
We took FTP as Transport Type and we input the FTP IP Adress, User etc.
The Inputs are all correct, we have also check if its possible to connect the FTP server via fillezilla, via cmd -- all works fine
But OWB 11.2 show us by test the connection this Error:
ENV0032: Location SAP_TEST is invalid. Check that you provided the PASSWORD or+
valid values for at least one of the set of mandatory parameters+
HOST_LOGIN_HOST+
I know that seems as if some is not ok with the password or the other parameters.
But all inputs are correct and the password doesn't contains any special character.
Also the connection to the SAP system works fine with OWB 11.2 but not with the FTP System.
Have somebody experience with this error or on a project by customer with separate SAP and FTP System?
Thanking you in anticipationHello,
hope somebody can help me. We are working on a BI Project by our Customer with a Exadata Machine.
The Goal of this project is to have the DWH on the Oracle Exadata machine.
At the Moment we have the Development System on a separate Server with OWB 11.1. and are to get stuck because we can't work with OWB 11.2 with the problem we have.
Separate for the coming Migration we set up for testing a machine with OWB 11.2.0.1 (Exadata is productiv system, so not available for testing)
The SAP System of the customer is on a separate physical Machine as the FTP Server.
The new possibility from the OWB 11.2 SAP Location allowed choose between different transport type, also for a separate FTP Server.
We took FTP as Transport Type and we input the FTP IP Adress, User etc.
The Inputs are all correct, we have also check if its possible to connect the FTP server via fillezilla, via cmd -- all works fine
But OWB 11.2 show us by test the connection this Error:
ENV0032: Location SAP_TEST is invalid. Check that you provided the PASSWORD or+
valid values for at least one of the set of mandatory parameters+
HOST_LOGIN_HOST+
I know that seems as if some is not ok with the password or the other parameters.
But all inputs are correct and the password doesn't contains any special character.
Also the connection to the SAP system works fine with OWB 11.2 but not with the FTP System.
Have somebody experience with this error or on a project by customer with separate SAP and FTP System?
Thanking you in anticipation -
Can not connect to Cerberus FTP Server with PASV
I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status: Resolving address of domain.com
Status: Connecting to ExternalIP:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS/SSL connection established, waiting for welcome message...
Response: 220-220-Welcome to Cerberus FTP Server
Response: 220 220 Created by Cerberus, LLC
Command: USER test
Response: 331 User test, password please
Command: PASS ***********
Response: 230 Password Ok, User logged in
Command: CLNT FileZilla
Response: 200 Command okay
Command: OPTS UTF8 ON
Response: 220 UTF8 support on
Command: PBSZ 0
Response: 200 PBSZ=0
Command: PROT P
Response: 200 PROT P OK, data channel will be secured
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is the current directory
Command: TYPE I
Response: 200 Type Binary
Command: PASV
Response: 227 Entering Passive Mode (external IP,195,83)
Command: MLSD
Error: Connection timed out
Error: Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.Dan,
Looking at the output,
Status: Resolving address of domain.com
Status: Connecting to ExternalIP:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike -
I am using ftp_connect to connect to a FTP server but getting error, what is the thing I am mising in that?
This code I got from SDN discussion. The function
HTTP_SCRAMBLE gives me the encrypted password but I want to know what is this key parameter?
If I enter 'ftp:
192.168.16.21\scan' it gices me error saying connection failed.
And if i enter only '192.168.16.21' it shows error that you are not authorised to access this. Where as If I try to put this 'ftp:
192.168.16.21\scan' in address bar it opens the location.
data l_passwd(30) TYPE c.
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = 'x1y2z3'
SOURCELEN = 6
KEY = 26101957
IMPORTING
DESTINATION = l_passwd
DATA W_HANDLE TYPE I.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'x1y2z3'
PASSWORD = l_passwd
ACCOUNT =
HOST = '192.168.16.21'
RFC_DESTINATION = 'SAPFTP'
GATEWAY_USER =
GATEWAY_PASSWORD =
GATEWAY_HOST =
IMPORTING
HANDLE = W_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Dilip,
As I understand, you have to pass the password as plane character datatype to FTP_CONNECT. What I mean is that it cannot be an encrypted password. I will suggest following code:
data:l_passwd(10) value 'YouRpAswd'. "Case sensitive
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'x1y2z3'
PASSWORD = l_passwd -
ConfigMgr Clients connection over direct access.
My test client machine is running Windows 8.1 and connecting to network through Direct Access. I am running SCCM 2012 R2 on Windows Server 2012.
Test Machine: NYWIN8
SCCM Server: SCCM01
Domain: demo.local
I would like to understand how configmgr handles clients connecting through direct access. What all functionality is available for such clients?
On my client machine is see following errors:
FSPSTATEMESSAGE.LOG
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
[CCMHTTP] ERROR: URL=HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED
POLICYAGENT.LOG
Policy
http://SCCM01.demo.local/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 is not available.
DATATRANSFERSERVICE.LOG
DTS job {E6FAADEE-F22E-4E89-92EE-C2D9C10C3056} BITS job {9C444FAB-FD3C-4A6B-B8A4-81DA159E4E45} failed to download source file
http://SCCM01.demo.local:80/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 to destination C:\Windows\CCM\Temp\{C9AA0DDC-BD37-442D-A00E-EE7404D47C12}.tmp with error 0x80190194
DTS job {E6FAADEE-F22E-4E89-92EE-C2D9C10C3056} BITS job {9C444FAB-FD3C-4A6B-B8A4-81DA159E4E45} partially completed 0/1 with error 0x80190194 context 5
Software Catalog Update Endpoint
Failed to open portal registry key 'Software\Policies\Microsoft\CCM'. maybe haven't been created yet. Error 0x80070002
WEDMTRACE.LOG
No CCM Identification blob
CAS.LOG
The number of discovered DPs(including Branch DP and Multicast) is 0
SMSCLIUI.LOG
Failed to set DNSSuffix value to the registry.
Are there any issues due to connecting using direct access?When I try to deploy any software (7-ZIP or Notepad++) to this client I get following error:
The software change returned error code 0x87D00607(-2016410105).
I can deploy same software fine to other machines connecting on LAN.
Server Logs:
Portlctl
PORTALWEB's previous status was 0 (0 = Online, 1 = Failed, 4 = Undefined)
PORTALWEBs http check returned hr=0, bFailed=0
awbsctl
AWEBSVCs http check returned hr=0, bFailed=0
AWEBSVC's previous status was 0 (0 = Online, 1 = Failed, 4 = Undefined)
Client Logs:
CAS
The number of discovered DPs(including Branch DP and Multicast) is 0
CCMEVAL
Client's current MP is http://SCCM01.DEMO.local and is accessible
ClientLocation
Current AD forest name is Demo.local, domain name is Demo.local
Domain joined client is in Intranet
Rotating assigned management point, new management point [1] is: SCCM01.demo.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>
Assigned MP changed from <SCCM01.demo.local> to <SCCM01.demo.local>.
ContentTransferManager
No data since 11/13/2013
CTM job {F6085C09-4C39-489E-A6F6-2C268398B7F2} successfully processed download completion.
DataTransfer
DTS job {B227AB6E-6D0F-4709-B8C6-AA8B66CBBE2D} BITS job {AE61D01C-E251-45FA-8B2C-2E22DDD91016} failed to download source file
http://SCCM01.demo.local:80/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 to destination C:\Windows\CCM\Temp\{22619283-47B1-445A-9262-C1FA54AD0F64}.tmp with error 0x80190194
DTS job {B227AB6E-6D0F-4709-B8C6-AA8B66CBBE2D} BITS job {AE61D01C-E251-45FA-8B2C-2E22DDD91016} partially completed 0/1 with error 0x80190194 context 5
Filebits
BranchCache Is Not Enabled
Failed to check PeerDistribution status. NOT able to do branch cache.
FSPSTATEMESSAGE
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
[CCMHTTP] ERROR: URL=HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED
Successfully sent location services HTTP failure message.
InternetProxy
Failed to get proxy for url 'HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp'. Error 0x87d00215
InventoryAgent
Inventory: 9 Collection Task(s) failed.
SCCLIENT
Event maps to notification type = Application Enforcement Failed (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at EventWatcher_EventArrived)
SMSCLIUI
Failed to set DNSSuffix value to the registry.
IPCONFIG /ALL from CLIENT:
Windows IP Configuration
Host Name . . . . . . . . . . . . : NYWIN8
Primary Dns Suffix . . . . . . . : demo.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : demo.local
System Quarantine State . . . . . : Not Restricted
Ethernet adapter vEthernet (Internal):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #3
Physical Address. . . . . . . . . : 00-15-5D-01-0B-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d3f:4e51:c648:7b26%26(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.123.38(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 872420701
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter vEthernet (External):
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
Physical Address. . . . . . . . . : 84-A6-C8-AF-03-DE
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9cb5:5132:1f47:e7c6%24(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, January 2, 2014 1:27:53 PM
Lease Expires . . . . . . . . . . : Saturday, January 4, 2014 12:27:55 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 730113736
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Local Area Connection* 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 84-A6-C8-AF-03-DF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 84-A6-C8-AF-03-E2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : E0-DB-55-D2-5E-59
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.home:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter iphttpsinterface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : iphttpsinterface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819(Preferred)
Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:c598:7f17:e286:369d(Preferred)
Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10(Preferred)
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 369098752
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{DC7D2C63-1506-49EC-A40F-AA4E56DE4001}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes -
Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
JustinTurns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages. -
How to connect to ms access database in jdbc
i want to connect to my ms access database located in my c:\tapi\dbexperts.mdb. please help me construct the connection string. thanks in advance for your help.
String database = "c:\\tapi\\dbexperts.mdb"; /* change it*/
String url = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=" + database + ";DriverID=22;READONLY=false";
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection(url); -
User named "Connected" logged on to my FTP server
I was checking out the activity on my server and found that I had a user with the name "Connected" logged into my FTP server as an authenticated user from address 218.188.21.181. I checked the system log and all I can find for entries on this IP address are repeated login failures.
My question is why does it show an active "Authenticated" connection from that IP address in Server Admin with a bogus name of "Connected", when the system log only shows entries from that IP address as repeated login failures? How can I tell if this person logged in successfully since successful logins are not logged?This is all that I can find in the system log for that IP address. From what I can tell (system.log does not show successful FTP connections from what I can see), he has not connected. If he has, he has not done anything over FTP. I have every option selected for FTP logging, so any directory change, or file transfer would be logged. Anonymous access is disabled and I have gone over every share to make sure that none of them have guest access enabled. What bothers me is when looking at the FTP service in Server Admin, under the connections tab, it shows the following connection:
Name: connected
Type: Authenticated
Address: 218.188.21.181
Activity: IDLE
Other (known) users are listed as well, and when I look at the activity log, I can see that they are uploading/dowloading files from the server as expected. I just want to know why I have this user named "connected" that appears to be connected to the server.
System.log:
Jan 22 18:09:46 minime ftpd[132]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 18:19:52 minime ftpd[689]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 18:30:05 minime ftpd[1138]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 18:40:29 minime ftpd[1652]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 18:51:01 minime ftpd[1853]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:01:43 minime ftpd[2001]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:12:34 minime ftpd[2269]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:23:33 minime ftpd[2452]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:34:41 minime ftpd[2610]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:45:58 minime ftpd[2792]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:57:24 minime ftpd[2967]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:08:59 minime ftpd[3129]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:20:43 minime ftpd[3446]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:32:36 minime ftpd[3570]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:44:38 minime ftpd[3675]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:56:49 minime ftpd[3769]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 21:09:09 minime ftpd[3868]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 21:21:42 minime ftpd[4085]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 21:34:20 minime ftpd[4164]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 21:47:07 minime ftpd[4264]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 22:00:04 minime ftpd[4383]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 22:13:10 minime ftpd[4573]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 22:26:24 minime ftpd[4731]: repeated login failures from 218.188.21.181 [218.188.21.181] -
I'm connecting to an Access database through the JDBC ODBC bridge as follows
String driver = "sun.jdbc.odbc.JdbcOdbcDriver";
String url = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=" + location + ";Uid=" + username + ";Pwd=" + password + ";";
The problem I'm having though, is when I try to set the fetch size (rs.setFetchSize(100)) of my result set I get an "Invalid Fetch Size" SQL exception. I'm pulling in a fairly large bit of data (about 10k rows) and I'm assuming setting the fetch size will speed things up (suggestions welcome here as well).
I've done some searching and can't find whether or not Access supports this feature. Or if it does, can anyone recommend a driver that allows it?
Thanks in advance.So I was able to come up with something that doesn't throw an error, although I'm not sure if it yields any performance benefits:
statement = connection.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY);
statement.setMaxRows(fetchSize);
statement.setFetchSize(fetchSize);
rs = statement.executeQuery(query);
rs.setFetchSize(fetchSize);
I did a getMaxRows on my statement and noticed it defaulted to 0. Setting the max rows allowed me to set the fetch size without throwing a sql exception.
Maybe you are looking for
-
First, I want to thank Rosa, the tech who helpe me fix my wife's Blackberry Curve so it was able to complete the system update. And she was a multi-tasking machine as she also addressed my issue with my DroidX. What I am writing here is in no way, a
-
Can't sync apps, music or videos on my iPhone4 with iTunes 10.2.2
I just updated iTunes to 10.2.2 (on 10.2.1 everything was going smoothly) and now it seems that i can't sync anything to my iPhone 4 (fw 4.3.2). I'm using a Windows 7 32-bit OS. After selecting any app from the apps tab, iTunes will display the next
-
Report skips first entry in resultSet
I have an application with four different reports that can work with the same resultset. Three of them are fine, but for some reason the fourth always skips the first record returned by the resultset. The reports have 2 columns, and are formatted to
-
Unable to see options in access manager.!!!
Hey Geeks, I am not sure what changes but I do not see 'users","roles" ,"services" on the access manager console under view dropdown. has somebody faced this kinda issue.? I was able to see all the options earlier and I havent changed anything.Althou
-
I have used PS7 forever and just tried CS1 for the first time and none of my PSD overlay files for my subtitle track get recognized. I use motion menus and have my buttons made from the subtitle track. The only file that DVD SP 3.02 will recognize is