Connecting to Tuxedo - suggest best solution
Hi,
We are transforming one of our client server application to Oracle ADF application, the existing application uses VisualAge Interspace for connecting to tuxedo. The application passes the values to the intespace dll as tab separated string there after the dll will call the tuxedo and get the value from that and return the values as tab delimited string to the client. We are palnning to use weblogic 10.3. On web search we found that following services are available
1. WTC
2. JOLT
3. SALT
please suggest the best approach to connect Tuxdo from Weblogic server and use in ADF
Thanks
If I recall correctly, JOLT is simply a limited Tuxedo Java client that does not provide the gateway/bridging capabilities of WTC. I haven't looked at WTC closely in years, but somewhat recall that, unlike JOLT, it supplies things like:
* The ability to call EJBs from Tuxedo using Tux APIs
* The ability to call Tux services from WebLogic using standard JEE RMI/EJB APIs.
* XA Integration (Transactions that span both Tux and JEE operations)
* Queuing Integration (eg Tux /Q to JMS destination bridge)
You can probably get more definitive advice from the [Tuxedo newsgroup | http://forums.oracle.com/forums/forum.jspa?forumID=565].
Tom
Edited by: TomB on Dec 22, 2009 6:27 PM
Edited by: TomB on Dec 22, 2009 6:29 PM
Similar Messages
-
Hi! I bought my Macbook Pro 13" in october last year but from last month oftenly my WiFi connection hangs up nd stops catching any available Wifi connection?
At last I restart the modem and dn it catches the signal but that too is short lived.
please suggest some solutions
Thanking U,I have this problem on my home network but at the same time when my connection hangs up my other wifi machine remians connected. So i think there's no problem with the modem.
-
Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).
Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false -
Suggestion Required for Best Solution
Hi All,
Please share your thoughts for the best solution to implement.
Scenario: ATG to interact with the Middleware layer. ATG will be the webportal front end and there will be different sales channels.ATG Product catalog will be the product master.
Approach 1: Sales Channels will interact with Middleware layer and ATG will expose the product datalog and some business rules via webservice.
Approach 2: Sales Channels will interact directly with ATG through webservices and ATG will interact with Middleware layer for some business rules.
The difficulty for me in finding the best approach is ATG front end business rules cannot be moved to middleware and same the middleware business rules cannot be moved to ATG front end. Also, the challenge here is we need to use SOAP for service contracts but ATG webservice supports only JAX RPC.
Which will be the best approach and share if you have any other approaches.
Thanks,
DKAYes OOTB ATG only support JAX-RPC webservices but with little work you can expose any global component in ATG as JAX-WS webservice.
Refer following document for JBoss reference implementation:
Refer: https://docs.jboss.org/author/display/JBWS/JAX-WS+User+Guide
You have to define a class from which you can call a global Nucleus component and then declare it as webservice as .
@WebService(
name="ATGCompoenetAsService",
targetNamespace="http://mycompany.com/services/ATGCompoenetAsService",
serviceName="ATGCompoenetAsServiceService"
@SOAPBinding(style = SOAPBinding.Style.DOCUMENT)
public class MyATGComponentServlet
@WebMethod
@RequestWrapper(localName = "ATGCompoenetAsServiceRequestWrapper")
@ResponseWrapper(localName = "ATGCompoenetAsServiceResponseWrapper")
@WebResult(name="ATGCompoenetAsServiceResponses")
public ATGCompoenetAsServiceResponse performService( @WebParam(name="ATGCompoenetAsServiceRequest") ATGCompoenetAsServiceRequest pRequest )
ATGCompoenetAsServiceService service = (ATGCompoenetAsServiceService)Nucleus.getGlobalNucleus().resolveName( "/medline/medlinedotcom/ATGCompoenetAsService/ATGCompoenetAsServiceService" );
return service.performService( pRequest );
You can then declare this is your web.xml as servlet and wallah you have webservice deployed as servlet.
You can see the WSDL be appending ?WSDL to your servlet path. -
Performance degradation using Jolt ASP Connectivity for TUXEDO
We have a customer that uses Jolt ASP Connectivity for TUXEDO and is suffering
from a severe performance degradation over time.
Initial response times are fine (1 s.), but they tend to increase to 3 minutes
after some time (well, eh, a day or so).
Data:
- TUXEDO 7.1
- Jolt 1.2.1
- Relatively recent rolling patch installed (so no there are probably no JSH performance
issues and memory leaks as fixed in earlier patches)
The ULOG shows that during the night the JSH instances notice a timeout on behalf
of the client connection and do a forced shutdown of the client:
040911.csu013.cs.kadaster.nl!JSH.234333.1.-2: JOLT_CAT:1185: "INFO: Userid:
[ZZ_Webpol], Clientid: [AP_WEBSRV3] timed out due to inactivity"
040911.csu013.cs.kadaster.nl!JSH.234333.1.-2: JOLT_CAT:1198: "WARN: Forced
shutdown of client; user name 'ZZ_Webpol'; client name 'AP_WEBSRV3'"
This happens every 10 minutes as per configuration of the JSL (-T flag).
The customer "solved" the problem for the time being by increasing the connection
pool size on the IIS web server.
However, they didn't find a "smoking gun" - no definite cause for the problem.
So, it is debatable whether their "solution" suffices.
It is my suspicion the problem might be located in the Jolt ASP classes running
on the IIS.
Maybe the connection pool somehow loses connections over time, causing subsequent
users having to queue before they get served (although an exception should be
raised if no connections are available).
However, there's no documentation on the functioning of the connection pool for
Jolt ASP.
My questions:
1) What's the algorithm used for managing connections with Jolt ASP for TUXEDO?
2) If connections are terminated by a JSH, will a new connection be established
from the web server automatically? (this is especially interesting, because the
connection policy can be configured in the JSL CLOPT, but there's no info on how
this should be handled/configured by Jolt ASP connectivity for TUXEDO)
Regards,
Winfried ScheuldermanHi,
For ASP connectivity I would suggest looking at the .Net client facility provided in Tuxedo 9.1 and later.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
Best solution for media storage
Hi Everyone,
I am looking for suggestions/how-to on the best setup for media storage. We have two editors (and two computers - Mac Pro PowerPC and iMac Intel). We are currently using an internal 500 GB slot on the Mac Pro along with 1 additional external 1.5 TB drive. Then, on our iMac we use a 1.5 TB external drive. We use, for external drives, LaCie.
Here's our problem. We are running out of space. So, what is the best solution for media storage? Should we get a small rack for our external drives from LaCie and daisy chain them? Or, should we get a server? The only problem I have with a server is connection speed...we, most of the time, have a slow connection at our college.
p.s. here is a link to LaCie's website listing a rack...and we have the d2 drives. So, do you daisy chain them or plug each one in individually?
http://www.lacie.com/us/products/product.htm?pid=10172
Any ideas/thoughts/suggestions are greatly appreciated!!
Thanks in advance.
zanm
Message was edited by: zanfardinomHi Everyone!
Thank you all for your suggestions. I agree...Drobo looks great, but I am finding more and more bad news when it comes to editing. It looks like a great solution for archiving. I received another solution with great reviews from one of my colleagues contacts. They work for a big company.
Hope this helps...something else to add to the mix.
*Our edit suite storage solution is a Facilis Terrablock 24EX unit. (http://www.facilis2.com/24ex.html) It has 18TB of space and is connected on 4GB Fibre channel to both suites. On top of that we have an Apple X-Serve running Final Cut Server that sorts and catalogs all the video we put in so network users (Mac and PC) can search and look at media from their workstations. We just put this in a few months ago. Before that we had a Rorke Data Galaxy HDX with 6TB of space on a 2GB Fibre Channel connection. ( http://www.rorke.com/av/galaxy-hdx.cfm ) It’s now a backup storage unit. Both systems have excellent performance though, we upgraded mostly for space and the server software.*
Again, thank you all for your help. I will research all suggestions. -
Best solution for DDL audit required
I have a db on which more than 20 developers are working I want to track all the ddl's made to table and views, which can be the best solution to track the ddl
thanks in advanceI am using a DDL trigger, as suggested, but this is the second "line of defense".
In the databases I maintain, only a DBA can perform DDL commands. Developers are connecting to empty schemas (connectors), that have update/query roles on schemas that hold the actual application objects (owner schemas).
This way, our developers don't know the password to the owners, and you can be calm your databases are safe...
Idan. -
What is teh best solution for my Problem??
hello everyone
i'am planing to develop a Patient Management System (PMS)
since i 'm not that guru in the J technologies i would like you to get me some help with this decision:
what is the best solution for developeing an intranet "PMS" which should handles data (connection to postgresql) and runs some algorithm (for planing puropose) im background ??
1 developeing a web based solution (servlet and jsp and and ..)
2 developeing an application wich will be manging everything ??? (a kind of programm with its own GUI)
3 you may have an other idea solution and ill be gald for any advices
ps sorry for my english its not that great ;)Web applications are all the rage these days and IMO rightly so as they greatly reduce deployment cost and headaches.
They do have some drawbacks though which for you might be important.
I can imagine that sooner or later (probably sooner in my experience) a requirement to interface with hardware installed on the client machines will emerge.
Whether this is a barcode scanner or a chipcard reader to get client information from some form of card issued to the client, or maybe a label printer to print out labels for medication bottles doesn't matter, you need to access the client machine directly.
Web applications have great difficulty with that (in fact, it's all but impossible).
You could go for an applet solution but that's contrived at best and still leaves the same problems.
So in your situation an old-fashioned client/server application (maybe using web services to communicate with the serverside application) is likely the best longterm solution.
You'd have the database remote so everyone has access to the same data, being accessed through processes run on the server and called by the clients. These can also do most of the business logic, leaving the clients relatively dumb responsible mainly for data validation and entry and presentation of the results. -
Pop Up Window - Dynamic Page - Need Best Solution
I'd like to create a pop-up window for my site. I've used behaviors in the past. I'm not sure if that's the best way now. Basiclly I have a photo gallery with thumbnails. Once you click the thumbnail I want a larger window to open with the image. I've seen the javascript windows used that use CSS lightbox, however I can't get it to work with my site. I guess I should mention I'm using:
ASP vbscript
SQL Database
Unit is set for repeating regions
Help me find the best solution to carry out this task. Thanks in advance.At this time I can't post the page. This is what I'm using:
http://www.lokeshdhakar.com/projects/lightbox2/
Using asp vbscript ,ms sql database with a link to the image paths that are sitting in the images folder.
This is really all I can show you. Hopefully you can make heads of tails out of it. Thanks for answering my post!
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!--#include file="Connections/conn_ssfGallery.asp" -->
<%
Dim rs_ssfGallery
Dim rs_ssfGallery_cmd
Dim rs_ssfGallery_numRows
Set rs_ssfGallery_cmd = Server.CreateObject ("ADODB.Command")
rs_ssfGallery_cmd.ActiveConnection = MM_conn_ssfGallery_STRING
rs_ssfGallery_cmd.CommandText = "SELECT * FROM dbo.tbl_pictures ORDER BY picture_ID ASC"
rs_ssfGallery_cmd.Prepared = true
Set rs_ssfGallery = rs_ssfGallery_cmd.Execute
rs_ssfGallery_numRows = 0
%>
<%
Dim HLooper1__numRows
HLooper1__numRows = 25
Dim HLooper1__index
HLooper1__index = 0
rs_ssfGallery_numRows = rs_ssfGallery_numRows + HLooper1__numRows
%>
<%
' *** Recordset Stats, Move To Record, and Go To Record: declare stats variables
Dim rs_ssfGallery_total
Dim rs_ssfGallery_first
Dim rs_ssfGallery_last
' set the record count
rs_ssfGallery_total = rs_ssfGallery.RecordCount
' set the number of rows displayed on this page
If (rs_ssfGallery_numRows < 0) Then
rs_ssfGallery_numRows = rs_ssfGallery_total
Elseif (rs_ssfGallery_numRows = 0) Then
rs_ssfGallery_numRows = 1
End If
' set the first and last displayed record
rs_ssfGallery_first = 1
rs_ssfGallery_last = rs_ssfGallery_first + rs_ssfGallery_numRows - 1
' if we have the correct record count, check the other stats
If (rs_ssfGallery_total <> -1) Then
If (rs_ssfGallery_first > rs_ssfGallery_total) Then
rs_ssfGallery_first = rs_ssfGallery_total
End If
If (rs_ssfGallery_last > rs_ssfGallery_total) Then
rs_ssfGallery_last = rs_ssfGallery_total
End If
If (rs_ssfGallery_numRows > rs_ssfGallery_total) Then
rs_ssfGallery_numRows = rs_ssfGallery_total
End If
End If
%>
<%
Dim MM_paramName
%>
<%
' *** Move To Record and Go To Record: declare variables
Dim MM_rs
Dim MM_rsCount
Dim MM_size
Dim MM_uniqueCol
Dim MM_offset
Dim MM_atTotal
Dim MM_paramIsDefined
Dim MM_param
Dim MM_index
Set MM_rs = rs_ssfGallery
MM_rsCount = rs_ssfGallery_total
MM_size = rs_ssfGallery_numRows
MM_uniqueCol = ""
MM_paramName = ""
MM_offset = 0
MM_atTotal = false
MM_paramIsDefined = false
If (MM_paramName <> "") Then
MM_paramIsDefined = (Request.QueryString(MM_paramName) <> "")
End If
%>
<%
' *** Move To Record: handle 'index' or 'offset' parameter
if (Not MM_paramIsDefined And MM_rsCount <> 0) then
' use index parameter if defined, otherwise use offset parameter
MM_param = Request.QueryString("index")
If (MM_param = "") Then
MM_param = Request.QueryString("offset")
End If
If (MM_param <> "") Then
MM_offset = Int(MM_param)
End If
' if we have a record count, check if we are past the end of the recordset
If (MM_rsCount <> -1) Then
If (MM_offset >= MM_rsCount Or MM_offset = -1) Then ' past end or move last
If ((MM_rsCount Mod MM_size) > 0) Then ' last page not a full repeat region
MM_offset = MM_rsCount - (MM_rsCount Mod MM_size)
Else
MM_offset = MM_rsCount - MM_size
End If
End If
End If
' move the cursor to the selected record
MM_index = 0
While ((Not MM_rs.EOF) And (MM_index < MM_offset Or MM_offset = -1))
MM_rs.MoveNext
MM_index = MM_index + 1
Wend
If (MM_rs.EOF) Then
MM_offset = MM_index ' set MM_offset to the last possible record
End If
End If
%>
<%
' *** Move To Record: if we dont know the record count, check the display range
If (MM_rsCount = -1) Then
' walk to the end of the display range for this page
MM_index = MM_offset
While (Not MM_rs.EOF And (MM_size < 0 Or MM_index < MM_offset + MM_size))
MM_rs.MoveNext
MM_index = MM_index + 1
Wend
' if we walked off the end of the recordset, set MM_rsCount and MM_size
If (MM_rs.EOF) Then
MM_rsCount = MM_index
If (MM_size < 0 Or MM_size > MM_rsCount) Then
MM_size = MM_rsCount
End If
End If
' if we walked off the end, set the offset based on page size
If (MM_rs.EOF And Not MM_paramIsDefined) Then
If (MM_offset > MM_rsCount - MM_size Or MM_offset = -1) Then
If ((MM_rsCount Mod MM_size) > 0) Then
MM_offset = MM_rsCount - (MM_rsCount Mod MM_size)
Else
MM_offset = MM_rsCount - MM_size
End If
End If
End If
' reset the cursor to the beginning
If (MM_rs.CursorType > 0) Then
MM_rs.MoveFirst
Else
MM_rs.Requery
End If
' move the cursor to the selected record
MM_index = 0
While (Not MM_rs.EOF And MM_index < MM_offset)
MM_rs.MoveNext
MM_index = MM_index + 1
Wend
End If
%>
<%
' *** Move To Record: update recordset stats
' set the first and last displayed record
rs_ssfGallery_first = MM_offset + 1
rs_ssfGallery_last = MM_offset + MM_size
If (MM_rsCount <> -1) Then
If (rs_ssfGallery_first > MM_rsCount) Then
rs_ssfGallery_first = MM_rsCount
End If
If (rs_ssfGallery_last > MM_rsCount) Then
rs_ssfGallery_last = MM_rsCount
End If
End If
' set the boolean used by hide region to check if we are on the last record
MM_atTotal = (MM_rsCount <> -1 And MM_offset + MM_size >= MM_rsCount)
%>
<%
' *** Go To Record and Move To Record: create strings for maintaining URL and Form parameters
Dim MM_keepNone
Dim MM_keepURL
Dim MM_keepForm
Dim MM_keepBoth
Dim MM_removeList
Dim MM_item
Dim MM_nextItem
' create the list of parameters which should not be maintained
MM_removeList = "&index="
If (MM_paramName <> "") Then
MM_removeList = MM_removeList & "&" & MM_paramName & "="
End If
MM_keepURL=""
MM_keepForm=""
MM_keepBoth=""
MM_keepNone=""
' add the URL parameters to the MM_keepURL string
For Each MM_item In Request.QueryString
MM_nextItem = "&" & MM_item & "="
If (InStr(1,MM_removeList,MM_nextItem,1) = 0) Then
MM_keepURL = MM_keepURL & MM_nextItem & Server.URLencode(Request.QueryString(MM_item))
End If
Next
' add the Form variables to the MM_keepForm string
For Each MM_item In Request.Form
MM_nextItem = "&" & MM_item & "="
If (InStr(1,MM_removeList,MM_nextItem,1) = 0) Then
MM_keepForm = MM_keepForm & MM_nextItem & Server.URLencode(Request.Form(MM_item))
End If
Next
' create the Form + URL string and remove the intial '&' from each of the strings
MM_keepBoth = MM_keepURL & MM_keepForm
If (MM_keepBoth <> "") Then
MM_keepBoth = Right(MM_keepBoth, Len(MM_keepBoth) - 1)
End If
If (MM_keepURL <> "") Then
MM_keepURL = Right(MM_keepURL, Len(MM_keepURL) - 1)
End If
If (MM_keepForm <> "") Then
MM_keepForm = Right(MM_keepForm, Len(MM_keepForm) - 1)
End If
' a utility function used for adding additional parameters to these strings
Function MM_joinChar(firstItem)
If (firstItem <> "") Then
MM_joinChar = "&"
Else
MM_joinChar = ""
End If
End Function
%>
<%
' *** Move To Record: set the strings for the first, last, next, and previous links
Dim MM_keepMove
Dim MM_moveParam
Dim MM_moveFirst
Dim MM_moveLast
Dim MM_moveNext
Dim MM_movePrev
Dim MM_urlStr
Dim MM_paramList
Dim MM_paramIndex
Dim MM_nextParam
MM_keepMove = MM_keepBoth
MM_moveParam = "index"
' if the page has a repeated region, remove 'offset' from the maintained parameters
If (MM_size > 1) Then
MM_moveParam = "offset"
If (MM_keepMove <> "") Then
MM_paramList = Split(MM_keepMove, "&")
MM_keepMove = ""
For MM_paramIndex = 0 To UBound(MM_paramList)
MM_nextParam = Left(MM_paramList(MM_paramIndex), InStr(MM_paramList(MM_paramIndex),"=") - 1)
If (StrComp(MM_nextParam,MM_moveParam,1) <> 0) Then
MM_keepMove = MM_keepMove & "&" & MM_paramList(MM_paramIndex)
End If
Next
If (MM_keepMove <> "") Then
MM_keepMove = Right(MM_keepMove, Len(MM_keepMove) - 1)
End If
End If
End If
' set the strings for the move to links
If (MM_keepMove <> "") Then
MM_keepMove = Server.HTMLEncode(MM_keepMove) & "&"
End If
MM_urlStr = Request.ServerVariables("URL") & "?" & MM_keepMove & MM_moveParam & "="
MM_moveFirst = MM_urlStr & "0"
MM_moveLast = MM_urlStr & "-1"
MM_moveNext = MM_urlStr & CStr(MM_offset + MM_size)
If (MM_offset - MM_size < 0) Then
MM_movePrev = MM_urlStr & "0"
Else
MM_movePrev = MM_urlStr & CStr(MM_offset - MM_size)
End If
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Southern Store Fixtures Inc.</title>
<link href="CSS/global.css" rel="stylesheet" type="text/css" />
<link href="CSS/layout.css" rel="stylesheet" type="text/css" />
<link href="CSS/details.css" rel="stylesheet" type="text/css" />
<!--beginning of lightbox script -->
<link href="CSS/lightbox.css" rel="stylesheet" type="text/css" />
<script src="Scripts/protype.js" type="text/javascript"></script>
<script src="Scripts/scriptaculous.js?load=effects,builder" type="text/javascript"></script>
<script src="Scripts/lightbox.js" type="text/javascript"></script>
<!--end of lightbox script -->
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv1 {
position:absolute;
left:1226px;
top:643px;
width:284px;
height:251px;
z-index:1;
a:link {
color: #CCC;
text-decoration: none;
a:hover {
color: #5FABFF;
text-decoration: none;
a:visited {
text-decoration: none;
a:active {
text-decoration: none;
</style>
<link href="CSS/gallery.css" rel="stylesheet" type="text/css" />
</head>
<body>
<!--begining of wrapper div -->
<div id="wrapper">
<!---begining of header--->
<div id="header"><img src="SSFLogo.png" width="298" height="96" alt="SSFlogo" /></div>
<!---end of header--->
<div id="banner"><img src="blueHeader_2.png" width="950" height="133" alt="header" /></div>
<!---begining main nav--->
<div id="mainNav">
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="index.asp">Home</a> </li>
<li><a href="#" class="MenuBarItemSubmenu">Company Info</a>
<ul>
<li><a href="#">Privacy Policy</a></li>
<li><a href="#">About Us</a></li>
<li><a href="#">Jobs/Career</a></li>
<li><a href="#">Information Request</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="#">Gallery</a>
<ul>
<li><a class="MenuBarItemSubmenu" href="#">Store Pictures</a>
<ul>
<li><a href="#">Item 3.1.1</a></li>
<li><a href="#">Item 3.1.2</a></li>
</ul>
</li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Products</a>
<ul>
<li><a href="#">Self Serve</a></li>
<li><a href="#">Serve</a></li>
<li><a href="#">Multi Decks</a></li>
<li><a href="#">Combinations</a></li>
<li><a href="#">Food Service</a></li>
<li><a href="#">Islands</a></li>
<li><a href="#">Produce</a></li>
<li><a href="#">Floral</a></li>
<li><a href="#">Hot Foods</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">News/Events</a>
<ul>
<li><a href="#">Inside Look</a></li>
<li><a href="#">Happenings</a></li>
<li><a href="#">Trade Show Schedule</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Contact</a>
<ul>
<li><a href="#">Customer Service</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Buiss. Portal</a>
<ul>
<li><a href="#">Login</a></li>
</ul>
</li>
</ul>
</div>
<!---end main nav--->
<!---begining subBanner--->
<div id="subBanner"><img src="secBanner.png" width="950" height="156" alt="secBanner" /></div>
<!---end subBanner--->
<!---begining contenMain--->
<div id="contentMain">
<!--beginning of gallery div -->
<div id="gallery">
<p>
<!--beginning of galleryImage div -->
</p>
<table width="400" border="0" align="center" id="galleryNav2">
<tr>
<td width="100" align="center"><% If MM_offset <> 0 Then %>
<a href="<%=MM_moveFirst%>">First</a>
<% End If ' end MM_offset <> 0 %></td>
<td width="100" align="center"><% If MM_offset <> 0 Then %>
<a href="<%=MM_movePrev%>">Previous</a>
<% End If ' end MM_offset <> 0 %></td>
<td width="100" align="center"><% If Not MM_atTotal Then %>
<a href="<%=MM_moveNext%>">Next</a>
<% End If ' end Not MM_atTotal %></td>
<td width="100" align="center"><% If Not MM_atTotal Then %>
<a href="<%=MM_moveLast%>">Last</a>
<% End If ' end Not MM_atTotal %></td>
</tr>
</table>
<p> </p>
<table align="center" id="HorzLooper">
<%
startrw = 0
endrw = HLooper1__index
numberColumns = 5
numrows = 5
while((numrows <> 0) AND (Not rs_ssfGallery.EOF))
startrw = endrw + 1
endrw = endrw + numberColumns
%>
<tr align="center" valign="top">
<%
While ((startrw <= endrw) AND (Not rs_ssfGallery.EOF))
%>
<td><div id="galleryImage">
<div id="galleryThumb"><a href="images/pic/<%=(rs_ssfGallery.Fields.Item("picture_url").Value)%> rel="lightbox"><img src="images/thumb/<%=(rs_ssfGallery.Fields.Item("thumb_url").Value)%>" alt="<%=(rs_ssfGallery.Fields.Item("alt_url").Value)%>" /></a></div>
<div id="galleryImageID"><%=(rs_ssfGallery.Fields.Item("picture_ID").Value)%></div>
<div id="galleryImageFamily"><%=(rs_ssfGallery.Fields.Item("family").Value)%></div>
</div></td>
<%
startrw = startrw + 1
rs_ssfGallery.MoveNext()
Wend
%>
</tr>
<%
numrows=numrows-1
Wend
%>
</table>
<p> </p>
<table width="400" border="0" align="center" id="galleryNav">
<tr>
<td width="100" align="center"><% If MM_offset <> 0 Then %>
<a href="<%=MM_moveFirst%>">First</a>
<% End If ' end MM_offset <> 0 %></td>
<td width="100" align="center"><% If MM_offset <> 0 Then %>
<a href="<%=MM_movePrev%>">Previous</a>
<% End If ' end MM_offset <> 0 %></td>
<td width="100" align="center"><% If Not MM_atTotal Then %>
<a href="<%=MM_moveNext%>">Next</a>
<% End If ' end Not MM_atTotal %></td>
<td width="100" align="center"><% If Not MM_atTotal Then %>
<a href="<%=MM_moveLast%>">Last</a>
<% End If ' end Not MM_atTotal %></td>
</tr>
</table>
<!--end of galleryImage div -->
</div>
<!--end of gallery div -->
</div>
<!---end of contentMain--->
<!---begining of contentSec--->
<div id="contentSec">
<div id="column1"></div>
<div id="column2"></div>
<div id="column3"></div>
</div>
<!---end of contentSec--->
<!---begining of secNav--->
<div id="secNav">
<div id="column1">
<p align="center">Supermarket </p>
<p align="center">C-Store </p>
<p align="center">Small Format </p>
<p align="center"> Food Service </p>
<p align="center"> Gourmet </p>
<p align="center"> Restaurant</p>
</div>
<div id="column2">
<p align="center">Produce </p>
<p align="center">Prepared Foods</p>
<p align="center">Deli </p>
<p align="center"> Meat </p>
<p align="center">Seafood </p>
<p align="center">Cheese </p>
<p align="center">Bakery </p>
<p align="center">Floral </p>
<p align="center">Sushi </p>
<p align="center"> </p>
</div>
<div id="column3">
<p align="center">Soup </p>
<p align="center"> Chocolate </p>
<p align="center">Food Bars </p>
<p align="center">Low Temp </p>
<p align="center">Gelato </p>
<p align="center"> Hot Cases </p>
<p align="center"> Pizza/Sandwich </p>
<p align="center"> Multi-Decks </p>
<p align="center"> Islands</p>
<p> </p>
</div>
<div id="column4">
<p>Trade Shows</p>
<p>About</p>
<p>Info</p>
<p>Privacy</p>
<p>Content</p>
<p>Service</p>
<p>Parts</p>
<p>Login</p>
</div>
</div>
<!---end of secNav--->
<!---begining of footer--->
<div id="footer">Southern Store Fixtures 2010 Inc.| All Rights Reserved</div>
<!---end of footer--->
</div>
<!--end of wrapper div -->
<script type="text/javascript">
<!--
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
</body>
</html>
<%
rs_ssfGallery.Close()
Set rs_ssfGallery = Nothing
%> -
Best solutions for storing text, Word and pdf documents on iPad
I just switched from using a powerbook to an iPad + microkeyboard for my work computer (I'm freelance and need to bring my own device wherever I go), and I love the size and weight of it compared to a laptop.
What I am glitching on is the fact that I cannot save documents to my ipad. Clients email Word and PDF docs to me, and I have (very few of) my own docs, such as resumes, which I need to update slightly and send out to them as well. It's not ideal when I need to send out a resume to dig through my Sent folder on Mail and forward it, creating a new email but just saving the attachment. I also need to access certain received documents repeatedly as reference. I'm surprised iOS for iPad doesn't have a "Documents" folder as OS X does.
How are users working around this problem currently? Please give me suggestions for solutions. I'm hopeful that future iterations of iOS will provide a way to store and access a personal library of documents as it does photos and videos, so I will commit to working through this in the short term. What are your work arounds?
TI doubt iOS will ever change. iOS does not have a file manager system like you're used to on a laptop or desktop, so it lacks the ability to access files like you're used to. So whatever workarounds you find will likely become your regular work flow. If Apple hasn't added a file manager to iOS in the past 5 (give or take) years it's doubtful they'll do so in the future...the lack of a file manager is why the iOS operating system is so secure, viruses can't infect and use a file manager system to spread if they don't have one.)
iOS ties the access to files to the apps that access them. As you said, photos with the photos app, music with the music app. With your purchase of a new iOS device you are eligible for free Apple apps, amongst them Pages and Numbers, Apple's word processing and version of excel.. You can store your documents in that app and access them that way. Or there are tons of other word processing apps. I use Documents to Go (although it's not free so you may wish to experiment with the free apps first before you start paying)
File transfer....well Apple's work flow is that everyone has access to always on and always available internet, thus their workflow being built around the cloud and using the internet for file transfer, as well as e-mailing stuff to yourself. There are some flash drives out there that have their own wifi transmitter that may help you. You'd plug them into another computer, put the file on it, turn on the wifi transmitter and use a small localized hotspot to connect your ipad to and download the files to your iPad via an app that will come with the flash drive. -
How to connect to Tuxedo without Tuxedo adapter
Hello all,
I want to know the way to connect Oracle (BEA) Tuxedo using other adater than Tuxedo adapter provided by iWay.
Unfortunately, I'm not so much familiar with Tuxedo, but I hear that Oracle has CORBA architecture, so I suspect that we can use some other adapters provided by SAP PI itself to connect to Tuxedo.
If someone has experience of developping the adapter to connect to Tuxedo by scratch, I also want to know the detail of it.
Thank you for your information in advance.
Best regards,
Hideki KozaiHello all,
I want to know the way to connect Oracle (BEA) Tuxedo using other adater than Tuxedo adapter provided by iWay.
Unfortunately, I'm not so much familiar with Tuxedo, but I hear that Oracle has CORBA architecture, so I suspect that we can use some other adapters provided by SAP PI itself to connect to Tuxedo.
If someone has experience of developping the adapter to connect to Tuxedo by scratch, I also want to know the detail of it.
Thank you for your information in advance.
Best regards,
Hideki Kozai -
Best solution for managing 50 remote sites via cisco vpn
At the moment my support organisation use the cisco vpn client on their windows pc's to provide remote support to our customers. I want to know if there is a solution from cisco that would support nialing up the 30 connections all the time without having to use clients on individual pc's. I know there will be issues because some of the sites will have conflicting lan ip address ranges. We would like to offer improved support to our customers for example using nagios to monitor their servers but this is not possible if vpn connection if not nialled up.
Please help with the best solution.L2L vpns solution is suitable for your scenario, depending on your traffic load for each site u would have to do assesment on that, any asa5510 or higher in an active/standby architecture with stateful failover sure can do the job. As for conflicting LAN ips there is ways to work around that by using NAT or Policy NAT.
ASA product line
http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html
Perhaps for monitoring/managing Ipsec tunels CSM Cisco Security manager
http://www.cisco.com/en/US/products/ps6498/index.html -
Best Solution for Archiving Table data
Hi All,
I have a table with huge data. It is not partitioned table.
On an average per day 10000 records will be inserted into this table. Now I want to archive(backup)
every one years data manually and keep in safe location and hence delete those archived rows
from the table. Whenever required it should be easily imported back to this table. All this happens through
Application.
One appraoch in my mind right now, is transferring the data from table to flat file with comma separted,
and whenever required again importing back to the table from Flat file using external tables concept.
Can any body suggest what is best solution for this.
ThanksThe best solution would be partitioning.
Any other solution requires DML - running DELETE and INSERT transactions to remove a data set and to add a data set (if need be) again.
With partitioning this is achieved (in sub-seconds) using DDL by exchanging a partition's contents with that of a table. Which means that after the archived data has been loaded (SQL*Loaded, Import, etc) into a table (and indexes created), that table (with indexes) is "swapped" into the partition table as a partition. -
Best solution for showing photos on a HD TV?
I recently got a Sony HD TV with full 1080. I would like to be able to display my photos at the best resolution possible on it. What is the best way to do that? My computer is nowhere near the TV so I can't plug it in directly. I also am not interested in buying an Apple TV so I guess I'm looking at DVD. How do you get the best resolution using DVD's?
Thanks.
JohnDVD's give you, at best, a resolution of something like 852x400. Given that 1080i resolution is 1920x1080, you can see that you are loosing a huge amount of detail. It will look OK but not nearly as impressive as it might.
Honestly the best solution is to hook your Mac up to the TV. You can look for DVI cables online that are very long (I think as long as 50ft). You'll also probably need a DVI to HDMI adaptor, depending on what your TV accepts. The only question is if a cable run that long will be able to hold the signal OK.
The AppleTV would be a good alternative, but be aware that it limits resolution to 720p - 1280x720, which is much better than a DVD but not quite as good as a full 1080i connection. You probably wouldn't notice the difference between that and 1080i as much as between DVD and 1080i. Another alternative is an older non-Intel Mac MINI, still able to display a picture at 1080i just fine.
In the future, the answer to this question will be to buy a Blu-Ray burner and produce a 1080i slideshow to disc just as you can do with DVD today. But burners are still rather expensive as are players, so a second Mac or Apple TV would probably be cheaper at this point... -
What is the best solution for migrating from Maverick to Yosemite?
What is the best solution for migrating from Maverick to Yosemite? Anyone have suggestions?
Back up all data. Update all third-party software to the latest version and remove any you don't need. Download the Yosemite installer from the App Store. Run it.
Maybe you are looking for
-
Firewire Target disc mode - icon is freezing
Looks like my old Powerbook is getting close to biting the dust. I've actually worn a hole in the track pad and the cursor is getting jiggy. It's running 10.3.9 and is completely full. Oh, and the screen glows a sickly color of yellow. Honest, this t
-
Getting ORA-06502 in Runtime, but not throug Developer
I got a copy of Matrix.fmb & Matrix.pll from someone at oracle and changed it up for my application. It worked great. I just recently upgraded from 8.05 to 10G and Developer 5 to 6. If I run the form from Developer, it runs great. If I run in using t
-
I have a HTC Thunderbolt. It has happened to me about 4 times so far, where I will be on a call and my phone display will freeze. Or I will be on a call and the mute button will accidentally be hit and then freeze. I would like to know how to fix
-
Foreign data incomplete appearing after deactivating
hi, i have problem in foreign trade data when i am doing export sales and when i pass the billing document it is asking for foreign data then i have to complete the foreign data then i have to pass to accounting. i have checked in T code VI
-
How can i Play a sound in iPhone?
in the application to play a sound file,use which API?who can tell me.