Connection afw failed

hi gurus,
    i getting an error msg " transmitting the message to endpoint http://hostname:8000/sap/xi/engine?type=entry using connection AFW failed ,due to com.sap.aii.af.ra.ms.runtime:clusterexception: serverinternal locking not avaliable"
With Regards,
Shakthi Raj N.

Hi, I'm experiencing the same problem.. how did you solved it?
Thanks in advance for your help
Sonia

Similar Messages

  • Webservice and BPM; connection AFW failed

    I have created the following integration process:
    1. Asynchronous receive step of a xml file;
    2. Synchronous send step to invoke webservice;
    3. Asynchronous send step of the response file.
    In this process XI will read a xml file from a directory on the server, convert this file to a SOAP request, call the webservice and convert the SOAP response to a xml file. This file is then sent to the same server directory.
    When I look in SXMB_MONI the whole process is set to ok. The response of the webservice is in the payload of the XI response message. (This is the message from my integration process to the inbound message interface.).
    But the response file never reached its destination.
    When I look at the file adapter monitor it reports: "Up and running - no message processing until now".
    And when I look at the message monitoring, there are the following messages:
    2005-07-29 11:30:55 Success The message was successfully received by the messaging system.
    Profile: XI URL: http://nthvsnw4:50000/MessagingSystem/receive/AFW/XI
    2005-07-29 11:30:55 Success Using connection AFW. Trying to put the message into the receive queue.
    2005-07-29 11:30:55 Success Message successfully put into the queue.
    2005-07-29 11:30:55 Success The message was successfully retrieved from the receive queue.
    2005-07-29 11:30:55 Success The message status set to DLNG.
    2005-07-29 11:30:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
    2005-07-29 11:30:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:35:55 CEST 2005.
    2005-07-29 11:30:55 Success The message status set to WAIT.
    2005-07-29 11:35:55 Success The message was successfully retrieved from the receive queue.
    2005-07-29 11:35:55 Success The message status set to DLNG.
    2005-07-29 11:35:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
    2005-07-29 11:35:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:40:55 CEST 2005.
    2005-07-29 11:35:55 Success The message status set to WAIT.
    2005-07-29 11:40:55 Success The message was successfully retrieved from the receive queue.
    2005-07-29 11:40:55 Success The message status set to DLNG.
    2005-07-29 11:40:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
    2005-07-29 11:40:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:45:55 CEST 2005.
    2005-07-29 11:40:55 Success The message status set to WAIT.
    2005-07-29 11:45:55 Success The message was successfully retrieved from the receive queue.
    2005-07-29 11:45:55 Success The message status set to DLNG.
    2005-07-29 11:45:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
    2005-07-29 11:45:55 Error The message status set to NDLV.
    I looked at several postings with the subject "Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException", but I could not find any which seems to meet my problem.
    I would highly appreciate any help on this.

    Sorry for my late response, but I did not look at this after it was solved and I did not receive any mail. So please let me know if you still need some support.
    I could send you a document with some screen shots. If so send me an email ([email protected])

  • Connection AFW failed, due to: Received HTTP response code 500

    Hi,
    I have tried to develop a file to file scenario in XI 3.0. The Sendor File adapter is reading the file but the message is not getting transfered to Integration engine.
    The audit log for the message is as follows:
    2005-05-07 04:10:24 Success Channel FileSendor: Send binary file "/tmp/xi_input.dat". Size 324 with QoS EO
    2005-05-07 04:10:24 Success Application attempting to send an XI message asynchronously using connection AFW.
    2005-05-07 04:10:24 Success Trying to put the message into the send queue.
    2005-05-07 04:10:24 Success Message successfully put into the queue.
    2005-05-07 04:10:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
    2005-05-07 04:10:24 Success Confirmation mode test found. File will be resent next time
    2005-05-07 04:10:24 Success The message was successfully retrieved from the send queue.
    2005-05-07 04:10:24 Success The message status set to DLNG.
    2005-05-07 04:10:24 Error Transmitting the message to endpoint http://nadcp517:8020/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..
    Any suggestion...

    hi
    This problem comes due to the post installation steps might be at the time of post installation some wrong might be done.
    step1 : In sxmb_adm configure the integration server by giving the path as http://<host>:<abapport>/sap/xi/engine?type=entry
    step 2 : Check ur business system created at the time of post installation there u need to main the path as it as above.
    Reward points if useful,
    Regards,
    Srinivas.D

  • Connection AFW failed, due to: RecoverableException :  SOAP Adapter.

    Hi All,
      We are using XI3.0 Sp14 .  the message flow is
    IDOC> XI> SOAP ADPATER (receiver side)--> External system. 
    Here everything is fine, we are using https URL of the extrnal system to send the cXML file on there side.  The external URL is fine and working.
    When we send the idoc  from R/3  to XI.  then it  gives very common message.  I dont know what is wrong with this message.  . 
    Please check this , what I got in  Audit log:
    2007-04-16 10:14:03 Error Exception caught by adapter framework: null
    2007-04-16 10:14:03 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
    2007-04-16 10:14:03 Success The asynchronous message was successfully scheduled to be delivered at Mon Apr 16 10:19:03 EDT 2007.
    2007-04-16 10:14:03 Success The message status set to WAIT.
    I  don't know why  I am getting this error  message.   Please help me to resolve this.  Thanks
    regards
    Ram Singhal

    Hi,
    For SOAP receiver adapter, you have the WSDL file from the provider of the webservice, either from a URL link or physically receiving the file.
    The WSDL file contains the attribute "location" from the element "address", and the attribute "soapAction" from the element "operation".  These 2 values must be entered exactly as is into the SOAP comm chan config.
    Also, insure the proxy information are also entered correctly, include the userid/password if required.  The webservice provider may also require authentication, so make sure it is also entered.
    If possible, execute the webservice using a generic SOAP client tool to test.  Use the exact configuration entries as those you used in XI.  There are many free tools from the internet.
    Regards,
    Bill

  • Entry using connection AFW failed

    Hi,
    I am trying to read an external file and push it in to R/3 by calling RFC using XI.
    I configured everything.
    File and RFC adapters are working fine.
    After processing as per settings it is deleting the file  but it is not pushing in to R/3.
    In the Audit log i am getting the following messsages:
    1.Success>Send binary file "tom.xml" from FTP server "entegdt27:XIshared", size 140 bytes with QoS EO
    2.Success>Application attempting to send an XI message asynchronously using connection AFW.
    3.Success>Trying to put the message into the send queue.
    4.Success>Message successfully put into the queue.
    5.Success>The application sent the message asynchronously using connection AFW. Returning to application.
    6.Success>The message was successfully retrieved from the send queue.
    7.Success>File "tom.xml" deleted after processing
    8.Success>The message status set to DLNG.
    9.Error>Transmitting the message to endpoint http://entegdt27:8000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..
    10.Success>The asynchronous message was successfully scheduled to be delivered at Tue Dec 06 09:39:01 IST 2005.
    During retry the same error(9) is repeating.
    Can Anyone Help.
    Thanks in Advance

    Hi Chemmam,
           The file adapter is picking up the file and deleting the same.The problem should be in mapping or the receiver adapter configuration.
    Check the following things.
            1.In design time(repository) check whether the mapping between the two data types are perfect.Check the same by using test tab and execute option.
            2.Then go to the reciver SAP r/3 business system and go to transaction SM59.Check whether the a connection is established between the receiver system and the Intergration server.
              Create connections by giving the log on parameters of the XI server and the program ID and test the connection.
            3.If the test connection is perfect , then go to receiver R3 system and try executing the RFC as stand alone by giving appropriate inputs.
            4.If that is working fine.Then check for your configuration settings.The Comunication channel between XI and Receiver SAP R/3 should be under the SLD registered business system while the sender communication channel(File adapter) should be under a service.
             5.In receiver communication channel check for the log on parameters of the receiver SAP system.
          Hop this helps you in locating the root cause.
    regards,
    aravindh.

  • AFW: Failed to transmit message due to RecoverableException

    Hi all,
    I use a XI 3.0 SP 14.
    I've created a BPM with 3 steps:
    1) receive step
    2) send synchronous step
    3) send asynchronous step
    XI exposes a  Asynchronous Message Interface as a Web Service. Than the BPM uses this information to send a synchronous call to a Web Service (this WS is created from an EJB and deployed on a SAP Web AS 6.40). Than the BPM uses the WS response to send an asynchronous mail.
    In the SXI_MONITOR everything works fine, but in the message monitor (Messages from the Adapter Framework) I get this error when I try to send an e-mail (step 3):
    2005-11-08 15:22:25 Success The message was successfully received by the messaging system. Profile: XI URL: http://sapadx01:51600/MessagingSystem/receive/AFW/XI
    2005-11-08 15:22:25 Success Using connection AFW. Trying to put the message into the receive queue.
    2005-11-08 15:22:25 Success Message successfully put into the queue.
    2005-11-08 15:22:25 Success The message was successfully retrieved from the receive queue.
    2005-11-08 15:22:25 Success The message status set to DLNG.
    2005-11-08 15:22:25 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
    2005-11-08 15:22:25 Success The asynchronous message was successfully scheduled to be delivered at Tue Nov 08 15:27:25 CET 2005.
    2005-11-08 15:22:25 Success The message status set to WAIT.
    2005-11-08 15:27:25 Success Retrying to deliver message to the application. Retry: 1
    In the default trace I can see:
    Failed to transmit message 436f38c9-0617-022e-0200-00000ab44471(INBOUND) due to com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
    java.lang.NullPointerException
         at com.sap.aii.af.service.alerting.Alert.getInputInterface(Alert.java:330)
         at com.sap.aii.af.service.alerting.Alert.send(Alert.java:103)
         at com.sap.aii.af.service.alerting.Alert.run(Alert.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
         at java.security.AccessController.doPrivileged1(Native Method)
         at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
    I don't have this problem if instead of SOAP Synchronous call I do an RFC Synchronous call (on step 2)
    I also get a mail (step 3) if I have a System Error Exception in the SOAP synchrounous call (step 2)
    I have also noticed that:
    when I call the mail adapter (asynchronous step) with the Web Service Response in the HEADER I've got the ACK field:
    <SAP:Ack xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Status>OK</SAP:Status>
      <SAP:Category>permanent</SAP:Category>
    </SAP:Ack> 
    Instead if I call the mail adapter (asynchronous step) with the BAPI Response in the HEADER I haven't got the ACK field.
    But in the BPM send Asynchronous step the "acknowledgement" parameter is set to NONE
    Could you please help me?
    Best Regards,
    Paolo

    Ops... the note will be released in the near future...
    Anyway my problem was that the response message from the SOAP Receiver Adapter included the XI Ack header for any successfull response message. Then, when I tried to send an asynchronous request message to the Mail Receiver Adapter it was not able to manage this ACK.
    Best Regards,
    Paolo

  • Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

    when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
    OS:10.7.2
    Macbook Pro 2010-mid 13inch

    I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
    Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
    I'm also using a Macbook Pro 13-inch mid 2010.

  • CR2008 - Failed to open the connection. Failed to open the connection. ...

    Getting the following error when running CR2008 reports from web server:
    "Failed to open the connection. Failed to open the connection. <report_name>{2585477E-FB02-4594-9DB5-FFBFF2ABE124}.rpt"
    The web server is a Windows Server 2008 x64.  The IIS7 application pool is configured for 32bit, which solved our initial problem.  We are getting the above error if we use either CR2008 or CR2008 SP1.  Same issue with CRRuntime_12_1_mlb.exe.
    If we load CR2008 onto the web server, we can open and run the reports.  Thus, there appears to be no problem with the reports or the data source (an Access database).  Web application runs on development machine (windows xp).
    Why is there a GUID in the report file name?  How can we resolve this issue or what else should we check?
    TIA, Gary.

    Figured it out.  Turns out the ODBC data source name had been setup incorrectly.  Became obvious when stepping through the code.

  • CR2008:Failed to open the connection. Failed to open the connection. Report

    Hi,
    I've just upgraded from Crystal XI R2 to Crystal 2008. All my reports open happily in Crystal 2008. I have also deployed the Crystal 2008 runtime to a Windows 2003 SP2 R2 server running ASP.NET 1 and ASP.NET 2. Before the Crystal 2008 runtime was installed on top of the already present Crystal XI R2 Runtime I could view RPT files via the .NET report viewer (version XI). Now that Crystal 2008 runtime is installed I receive an error message when I try to view the reports, again, via the .NET report viewer (version 12), although no code has changed apart from all references changed from XI to 2008.
    Code is:
    CrystalDecisions.CrystalReports.Engine.ReportDocument oReportDocument = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
                oReportDocument.Load(sReportFilename);
    Tables oTables = oReportDocument.Database.Tables;
                   foreach (CrystalDecisions.CrystalReports.Engine.Table oTable in oTables)
                        TableLogOnInfo crTableLogOnInfo = oTable.LogOnInfo;
                        crTableLogOnInfo.ConnectionInfo.IntegratedSecurity = true;
                        crTableLogOnInfo.ConnectionInfo.DatabaseName = "DB" ;
                        crTableLogOnInfo.ConnectionInfo.ServerName = "server" ;
                        oTable.ApplyLogOnInfo(crTableLogOnInfo);
    CrystalReportViewer1.ReportSource = oReportDocument;
                this.DataBind();
    Error message is: 'Failed to open the connection. Failed to open the connection'.
    Any help would be great.
    Regards
    Tony

    You are correct in that there are no database connectivity changes in CR 2008.
    If you do not have SP0 for CR 2008, download it from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100007528552008E/cr2008_sp0.zip
    If that does not help, I'd like to check if the correct dlls are loading when using CR 2008. To do that, download the modules utility from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
    Then do the following:
    1) unzip the download
    2) Run the app with the CR 2008 references
    3) get the error. leave the error on the screen
    4) Start modules
    5) Go to the File menu, select New List -> Memory Modules
    6) Expand "By process"
    7) Find the app exe (or the .NET dev env)
    8) Click on that
    9) Go to the View menu and select Details
    10) Look to see if there are any dlls loading form the CR XI r2 directory (c:\Program files\Business Objects\Common\3.5\bin)
    Ludek

  • The connection has failed while creating a New Repository using Oracle BI 11g Administration Tool

    hi
    In the BI Administration Tool when i try to create a “New Repository…” faced The connection has failed I try all of these solutions but dident work..
    1-configured my “System DSN"
    2-enter “TNS_ADMIN” for the “Variable Name” field and for the “Variable Value” enter the location of my OBIEE
    3-copy the sqlnet and tnsnames.ora files into E:\obiee11gtmt\Oracle_BI1\network\admin and E:\obiee11gtmt\oracle_common\network\admin
    4- put this in DSN with connection type OCI 10g/11g (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = IP Addr)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ))
    please help me
    regard

    1.Place tnsnames.ora file in the following paths,
    E:\obiee11gtmt\oracle_common\network\
    E:\obiee11gtmt\Oracle_BI1\network\admin
    2.Navigate to
    E:\obiee11gtmt\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup\
    Open user.sh file in a notepad
    Set Tns_names paths as shown below with your tnsnames.ora file’s location,
    set TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
    The above path is of your installed Database tnsnames.ora file
    I guess you didnt do this step. This will solve your issue.
    Restart all the services
    If helpful, please mark the answer.
    Srikanth

  • Urg: Not able to import data from DB in OBIEE 11g : Connection has failed.

    Hi Team
    Recently while working in OBIEE 11g , I was trying to import tables from the data-base but I am getting an error " Connection has failed " .
    I have put the tnsora file in the network admin folder and the
    C:\OracleBIHome\Network\admin
    \OracleBI1\network\admin (Example: C:\OBI\Oracle_BI1\network\admin)
    \oracle_common\network\admin (Example: C:\OBI\oracle_common\network\admin)
    and have set the TNS_ADMIN variable in the User.cmd path  with the above path .
    But it is still not working . I have tried all the options but its still not working .
    Any help is appreciated.
    Regards
    R

    Is it Compulsory to give Schema and Work Schema while creating the Physical Schema in Oracle Data server?
    This is mandatory to have a schema and a work schema here.
    The schema and work schema could be the same user as the user who is connected to the dataserver!

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • AcquireConnection method call to the connection manager Excel connection Manager failed

    I used VS Studio 2008 (BIDS version 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results to different tabbed sheets of a single excel spreadsheet. The package was working just fine and has run
    successfully multiple times, but all of a sudden when opening the project, every single Data Flow task with an Excel Connection Manager displayed error icons. Each raises the following error message when attempting to open the Advanced Editor:
    SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at DataFlow task name: SSIS error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
    call to the connection manager Excel connection Manager failed with error code 0xC0202009. There may be error messages posted before this with more information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)
    From the time I created the original package (when it worked fine) until now:
     1) I have been using the same computer, the same login account and the same permissions.
     2) I have been writing to the same (32 bit) 2010 Excel file (which I created) in a folder on my local machine.
     3) The filename and location have not changed; a template file is used each time to move and overwrite the previous file. Both are in the same locations.
     4) I can independently open the target Excel file and the template Excel files with no errors.
     6) The ConnectionString has not changed. The Connnection String I am using is
      Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion\Results_dt01.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;".
     7) Run64BitRuntime is set to False.
    8)  Delay Validation is set to true
    9) This is not running under a SQL job  
    10) There are no child packages being run
    I CAN create a NEW Excel Connection Manager, assigning it the exact same target Excel spreadsheet, successfully, but when I attempt to assign it to the Data Flow destination this error occurs:
    "Test connection failed because of an error in initializing provider. Unspecified error."
    Thinking that the driver might be corrupt, I opened a second SSIS package, which also uses the Excel Connection Manager (same driver) and this package continues to work fine on the same workstation with no errors.
    I have searched online for causes of this error for many hours and found nothing that helps me to solve this issue.
    Does anyone have any suggestions for me?

    Yes, I have verified that the Excel file is not in use or opened by anyone, including me. It has been two months since I opened this particular package, although I have been working with other packages in this project. I just discovered that another
    package in the same project has the same problem - all Data Flows that output to an Excel Destination now have the same error icons. This second packages outputs to an entirely different Excel file than in the first package.  A summay:
    Package #1 has error on every Excel Destination and uses templateA to overwrite fileA and then writes to fileA
    Package #2 has error on every Excel Desintation and uses templateB to overwrite fileB and then writes to fileB
    Package #3 has no error on any Excel Destination and is linked to multiple files (none are A or B)
    Package #1 and #2 are in the same project, but Package #3 is in a separate project .
    I will try replacing the Excel files with new ones for Package 1 and 2.

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • I have OSX 10.6.8 with FaceTime 1.0.2.  It rings, tries to connect, then fails.  Is there an update for Facetime for this OSX 10.6.8?

    I have OSX 10.6.8 with FaceTime 1.0.2.  It rings, tries to connect, then fails.  Is there an update for Facetime for this OSX 10.6.8?

    Hi Pam TX, 
    Thanks for participating in the Apple Support Communities. 
    If you have FaceTime 1.0.2 on OS X Snow Leopard (10.6.8), you can update to version 1.0.5 to resolve this issue:
    OS X: FaceTime calls no longer connect when using Snow Leopard - Apple Support
    Install the latest FaceTime update available from the Updates pane of the Mac App Store to resolve this issue.
    Cheers,
    Jeremy 

Maybe you are looking for