Entry using connection AFW failed

Hi,
I am trying to read an external file and push it in to R/3 by calling RFC using XI.
I configured everything.
File and RFC adapters are working fine.
After processing as per settings it is deleting the file but it is not pushing in to R/3.
In the Audit log i am getting the following messsages:
1.Success>Send binary file "tom.xml" from FTP server "entegdt27:XIshared", size 140 bytes with QoS EO
2.Success>Application attempting to send an XI message asynchronously using connection AFW.
3.Success>Trying to put the message into the send queue.
4.Success>Message successfully put into the queue.
5.Success>The application sent the message asynchronously using connection AFW. Returning to application.
6.Success>The message was successfully retrieved from the send queue.
7.Success>File "tom.xml" deleted after processing
8.Success>The message status set to DLNG.
9.Error>Transmitting the message to endpoint http://entegdt27:8000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..
10.Success>The asynchronous message was successfully scheduled to be delivered at Tue Dec 06 09:39:01 IST 2005.
During retry the same error(9) is repeating.
Can Anyone Help.
Thanks in Advance

Hi Chemmam,
       The file adapter is picking up the file and deleting the same.The problem should be in mapping or the receiver adapter configuration.
Check the following things.
        1.In design time(repository) check whether the mapping between the two data types are perfect.Check the same by using test tab and execute option.
        2.Then go to the reciver SAP r/3 business system and go to transaction SM59.Check whether the a connection is established between the receiver system and the Intergration server.
          Create connections by giving the log on parameters of the XI server and the program ID and test the connection.
        3.If the test connection is perfect , then go to receiver R3 system and try executing the RFC as stand alone by giving appropriate inputs.
        4.If that is working fine.Then check for your configuration settings.The Comunication channel between XI and Receiver SAP R/3 should be under the SLD registered business system while the sender communication channel(File adapter) should be under a service.
         5.In receiver communication channel check for the log on parameters of the receiver SAP system.
      Hop this helps you in locating the root cause.
regards,
aravindh.

Similar Messages

Connection AFW failed, due to: Received HTTP response code 500

Hi,
I have tried to develop a file to file scenario in XI 3.0. The Sendor File adapter is reading the file but the message is not getting transfered to Integration engine.
The audit log for the message is as follows:
2005-05-07 04:10:24 Success Channel FileSendor: Send binary file "/tmp/xi_input.dat". Size 324 with QoS EO
2005-05-07 04:10:24 Success Application attempting to send an XI message asynchronously using connection AFW.
2005-05-07 04:10:24 Success Trying to put the message into the send queue.
2005-05-07 04:10:24 Success Message successfully put into the queue.
2005-05-07 04:10:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
2005-05-07 04:10:24 Success Confirmation mode test found. File will be resent next time
2005-05-07 04:10:24 Success The message was successfully retrieved from the send queue.
2005-05-07 04:10:24 Success The message status set to DLNG.
2005-05-07 04:10:24 Error Transmitting the message to endpoint http://nadcp517:8020/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..
Any suggestion...

hi
This problem comes due to the post installation steps might be at the time of post installation some wrong might be done.
step1 : In sxmb_adm configure the integration server by giving the path as http://<host>:<abapport>/sap/xi/engine?type=entry
step 2 : Check ur business system created at the time of post installation there u need to main the path as it as above.
Reward points if useful,
Regards,
Srinivas.D

Connection afw failed

hi gurus,
i getting an error msg " transmitting the message to endpoint http://hostname:8000/sap/xi/engine?type=entry using connection AFW failed ,due to com.sap.aii.af.ra.ms.runtime:clusterexception: serverinternal locking not avaliable"
With Regards,
Shakthi Raj N.

Hi, I'm experiencing the same problem.. how did you solved it?
Thanks in advance for your help
Sonia

Connection AFW failed, due to: RecoverableException : SOAP Adapter.

Hi All,
We are using XI3.0 Sp14 . the message flow is
IDOC> XI> SOAP ADPATER (receiver side)--> External system.
Here everything is fine, we are using https URL of the extrnal system to send the cXML file on there side. The external URL is fine and working.
When we send the idoc from R/3 to XI. then it gives very common message. I dont know what is wrong with this message. .
Please check this , what I got in Audit log:
2007-04-16 10:14:03 Error Exception caught by adapter framework: null
2007-04-16 10:14:03 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2007-04-16 10:14:03 Success The asynchronous message was successfully scheduled to be delivered at Mon Apr 16 10:19:03 EDT 2007.
2007-04-16 10:14:03 Success The message status set to WAIT.
I don't know why I am getting this error message. Please help me to resolve this. Thanks
regards
Ram Singhal

Hi,
For SOAP receiver adapter, you have the WSDL file from the provider of the webservice, either from a URL link or physically receiving the file.
The WSDL file contains the attribute "location" from the element "address", and the attribute "soapAction" from the element "operation". These 2 values must be entered exactly as is into the SOAP comm chan config.
Also, insure the proxy information are also entered correctly, include the userid/password if required. The webservice provider may also require authentication, so make sure it is also entered.
If possible, execute the webservice using a generic SOAP client tool to test. Use the exact configuration entries as those you used in XI. There are many free tools from the internet.
Regards,
Bill

Webservice and BPM; connection AFW failed

I have created the following integration process:
1. Asynchronous receive step of a xml file;
2. Synchronous send step to invoke webservice;
3. Asynchronous send step of the response file.
In this process XI will read a xml file from a directory on the server, convert this file to a SOAP request, call the webservice and convert the SOAP response to a xml file. This file is then sent to the same server directory.
When I look in SXMB_MONI the whole process is set to ok. The response of the webservice is in the payload of the XI response message. (This is the message from my integration process to the inbound message interface.).
But the response file never reached its destination.
When I look at the file adapter monitor it reports: "Up and running - no message processing until now".
And when I look at the message monitoring, there are the following messages:
2005-07-29 11:30:55 Success The message was successfully received by the messaging system.
Profile: XI URL: http://nthvsnw4:50000/MessagingSystem/receive/AFW/XI
2005-07-29 11:30:55 Success Using connection AFW. Trying to put the message into the receive queue.
2005-07-29 11:30:55 Success Message successfully put into the queue.
2005-07-29 11:30:55 Success The message was successfully retrieved from the receive queue.
2005-07-29 11:30:55 Success The message status set to DLNG.
2005-07-29 11:30:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-07-29 11:30:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:35:55 CEST 2005.
2005-07-29 11:30:55 Success The message status set to WAIT.
2005-07-29 11:35:55 Success The message was successfully retrieved from the receive queue.
2005-07-29 11:35:55 Success The message status set to DLNG.
2005-07-29 11:35:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-07-29 11:35:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:40:55 CEST 2005.
2005-07-29 11:35:55 Success The message status set to WAIT.
2005-07-29 11:40:55 Success The message was successfully retrieved from the receive queue.
2005-07-29 11:40:55 Success The message status set to DLNG.
2005-07-29 11:40:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-07-29 11:40:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:45:55 CEST 2005.
2005-07-29 11:40:55 Success The message status set to WAIT.
2005-07-29 11:45:55 Success The message was successfully retrieved from the receive queue.
2005-07-29 11:45:55 Success The message status set to DLNG.
2005-07-29 11:45:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-07-29 11:45:55 Error The message status set to NDLV.
I looked at several postings with the subject "Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException", but I could not find any which seems to meet my problem.
I would highly appreciate any help on this.

Sorry for my late response, but I did not look at this after it was solved and I did not receive any mail. So please let me know if you still need some support.
I could send you a document with some screen shots. If so send me an email ([email protected])

AFW: Failed to transmit message due to RecoverableException

Hi all,
I use a XI 3.0 SP 14.
I've created a BPM with 3 steps:
1) receive step
2) send synchronous step
3) send asynchronous step
XI exposes a Asynchronous Message Interface as a Web Service. Than the BPM uses this information to send a synchronous call to a Web Service (this WS is created from an EJB and deployed on a SAP Web AS 6.40). Than the BPM uses the WS response to send an asynchronous mail.
In the SXI_MONITOR everything works fine, but in the message monitor (Messages from the Adapter Framework) I get this error when I try to send an e-mail (step 3):
2005-11-08 15:22:25 Success The message was successfully received by the messaging system. Profile: XI URL: http://sapadx01:51600/MessagingSystem/receive/AFW/XI
2005-11-08 15:22:25 Success Using connection AFW. Trying to put the message into the receive queue.
2005-11-08 15:22:25 Success Message successfully put into the queue.
2005-11-08 15:22:25 Success The message was successfully retrieved from the receive queue.
2005-11-08 15:22:25 Success The message status set to DLNG.
2005-11-08 15:22:25 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-11-08 15:22:25 Success The asynchronous message was successfully scheduled to be delivered at Tue Nov 08 15:27:25 CET 2005.
2005-11-08 15:22:25 Success The message status set to WAIT.
2005-11-08 15:27:25 Success Retrying to deliver message to the application. Retry: 1
In the default trace I can see:
Failed to transmit message 436f38c9-0617-022e-0200-00000ab44471(INBOUND) due to com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
java.lang.NullPointerException
     at com.sap.aii.af.service.alerting.Alert.getInputInterface(Alert.java:330)
     at com.sap.aii.af.service.alerting.Alert.send(Alert.java:103)
     at com.sap.aii.af.service.alerting.Alert.run(Alert.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
I don't have this problem if instead of SOAP Synchronous call I do an RFC Synchronous call (on step 2)
I also get a mail (step 3) if I have a System Error Exception in the SOAP synchrounous call (step 2)
I have also noticed that:
when I call the mail adapter (asynchronous step) with the Web Service Response in the HEADER I've got the ACK field:
<SAP:Ack xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Status>OK</SAP:Status>
<SAP:Category>permanent</SAP:Category>
</SAP:Ack>
Instead if I call the mail adapter (asynchronous step) with the BAPI Response in the HEADER I haven't got the ACK field.
But in the BPM send Asynchronous step the "acknowledgement" parameter is set to NONE
Could you please help me?
Best Regards,
Paolo

Ops... the note will be released in the near future...
Anyway my problem was that the response message from the SOAP Receiver Adapter included the XI Ack header for any successfull response message. Then, when I tried to send an asynchronous request message to the Mail Receiver Adapter it was not able to manage this ACK.
Best Regards,
Paolo

AFW Failed

Guys
Doing file to file scenario. The transaction fails and throws an error message in RWB>>msg monitor that "Transmitting the message to end point http://<hostname>:<port>/sap/xi/engine?type=entry using connection failed. due to :Received HTTP response code 404"
When I checked XI Adapter Framework(Adapter engine netweaver) in RWB>> component monitoring, it show unable to establish connection to "http://<hostname>:<port>:8200/rtc"
Please give me a quick solution and expect good reward points
Regards
Govind

Hi,
1) Check pipeline URL in the SLD in the business system of the Integration Server
For this go to SLD->Business System-><Integrtaion Server>->Pipline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry
Where host is the host name of the Integration Server and port is the HTTP(8xxx) port.
2) RWB error - have a look into this SAP Note -768456
3) Check the ICM port also. Go to SMICM->Services here you should have http port
Hope this helps,
Regards,
Moorthy

Connection verification failed for data source using mySQL

Hi,
I having problem with mySQL datasource and getting the above error. This is only happening in our staging server. We are using ColdFusion 8 running JRUN4 and trying to connect to mySQL v 5.1.41. I tried adding DSN from my localhost using ColdFusion 9 developer edition and I am able to connect without error.I know that mysql server, username & password is valid. I can access the mysql also using mySQL gui tool from different pc and it works fine. I'm believe that this has something to do with mySQL driver? Can somebody shed some light on how can I fix my DSN connection problem? Thank you.
here's the error:
Connection verification failed for data source: forum
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception: ** BEGIN NESTED EXCEPTION ** java.net.ConnectException MESSAGE: Connection timed out: connect STACKTRACE: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.(Socket.java:366) at java.net.Socket.(Socket.java:208) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc.Connection.(Connection.java:1553) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266) at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:589) at coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(ConnectionRunner. java:67) at java.lang.Thread.run(Thread.java:619) ** END NESTED EXCEPTION ** Last packet sent to the server was 0 ms ago.

http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=6ef0253
HTH
Tim Carley
www.recfusion.com
[email protected]

Uninstall deployment for an AppV5 application with Connection group fails if using a User Collection but works on Machine Collections.

Hi,
I'm having troubles to understand why my application in AppV5 that was sequenced with "MS. AppV Sequencer SP1" is somehow failing to be uninstalled properly only if this on is deployed with a
User collection but on the other hand the same application installs & uninstalls perfectly if its deployed using a
Machine collection?
Here is an extract of the Appenforce.log:
Remove-AppvClientPackage : Operation failed because package belongs to a
connection group on the machine. Please ensure that package does not belong to
any connection groups.
Operation attempted: Remove AppV Package.
AppV Error Code: 020000050C.
Please consult AppV Client Event Log for more details.
Au caractŠre Ligne:1 : 106
+ import-module 'C:\Program Files\Microsoft Application
Virtualization\Client\Appv ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidResult : (:) [Remove-AppvClientPackage],
   ClientException
    + FullyQualifiedErrorId : RemovePackageError,Microsoft.AppV.AppvClientPowe
   rShell.RemoveAppvPackage
I know that SCCM 2012 does not uninstalls application prerequisites unless they are targeted by their individual uninstall collection or script an uninstall procedure on the main application. But if I try using the Machine collection the error is not appearing
and the main application is removed and the Prereq will be left behind without causing any trouble at all !!
So my question is: Why an APPV5 application with a connection group should be pushed in a Machine context ?
Notice that I already tried to do the troubleshooting to remove the application manually with PowerShell.
- set-executionpolicy unrestricted
- Import-Module AppvClient
- Get-AppvClientPackage -Name PackageName*
- Unpublish-AppvClientPackage $PackageName
- Remove-AppvClientPackage $PackageName
And actually it was removed but the problem started again if I tried to re-install /remove the application.
Will really appreciate your comments.
Kind Regards.
Joel E.G.

Hi Paul,
To be honest we already experienced many troubles after the SCCM console was migrated from R1 to R2, SCCM client was updated too in consequence, but our AppV5 client still remains on SP1.
I'm afraid that any application that uses Connections Groups will have to be pushed on a Machine context and I just wanted to really understand more about this subject of why it was working that way and not by User is there something I missed with (Run Virtual)
that for any reason is not perfectly implemented to run on a user context?
Any way, we will be testing AppV5 Client SP2 really soon because we have no choice.
Regards,
Joel EG

The connection has failed while creating a New Repository using Oracle BI 11g Administration Tool

hi
In the BI Administration Tool when i try to create a “New Repository…” faced The connection has failed I try all of these solutions but dident work..
1-configured my “System DSN"
2-enter “TNS_ADMIN” for the “Variable Name” field and for the “Variable Value” enter the location of my OBIEE
3-copy the sqlnet and tnsnames.ora files into E:\obiee11gtmt\Oracle_BI1\network\admin and E:\obiee11gtmt\oracle_common\network\admin
4- put this in DSN with connection type OCI 10g/11g (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = IP Addr)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ))
please help me
regard

1.Place tnsnames.ora file in the following paths,
E:\obiee11gtmt\oracle_common\network\
E:\obiee11gtmt\Oracle_BI1\network\admin
2.Navigate to
E:\obiee11gtmt\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup\
Open user.sh file in a notepad
Set Tns_names paths as shown below with your tnsnames.ora file’s location,
set TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
The above path is of your installed Database tnsnames.ora file
I guess you didnt do this step. This will solve your issue.
Restart all the services
If helpful, please mark the answer.
Srikanth

RFC connection (SM59) fails with load balancing enabled.

Hello All,
We have an RFC connection setup between two SAP systems. The RFC connection works fine if it points to the destination system. But if we enable load balancing, the connection fails with this error:
ERROR                partner not reached (host <hostname>, service sapms<SID>)
LOCATION             SAP-Server <source system> on host <host name of source> (wp 1)
DETAIL               NiPConnect2
CALL                 SO_ERROR
COMPONENT            NI (network interface)
COUNTER              3027
ERROR TEXT           Connection refused
ERROR NUMBER         79
MODULE               niuxi.c
LINE                 1069
RETURN CODE          -10
SUBRC                    0
RELEASE              46D
TIME                 Mon Aug 18 18:33:30 2008
VERSION              34
I've checked the /etc/services file, the following entries exist
sapms<SID> 3606/tcp
sapms<SID>s 3600/tcp
lstst at the source system works fine
lgtst -H <target host name> -S sapms<SID>
niping at the target system has a problem
> niping -c -S 3606
Mon Aug 18 10:23:14 2008
connect to server o.k.
ERROR => NiTClientLoop: NiTReadLoop (rc=-6) [nixxtst.cpp 2629]
ERROR       connection to partner broken
TIME        Mon Aug 18 10:23:14 2008
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -6
MODULE      niuxi.c
LINE        905
DETAIL      NiPRead (0.0.0.0/0, hdl 1)
SYSTEM CALL recv
COUNTER     1
Please help me figure out the problem.
regards,
Roshni

Hi,
I think you have added wrong port entry in services file.
The entry of sap servers in services file for load balancing are
sapms<SID> 36<instance number>/tcp
so please check once again and add the entry using above formula in services file.
Also add the entry of all SAP servers in your hosts file.
<IP> <HOSTNAME>

ORA-28546: Connection initialization failed,probable Net 8 admin error

I am getting this error in calling an external procedure (dll file) from a stored procedure.
This was running fine earlier . It started causing problem after Database restart.
Please suggest

check to make sure that your extproc_connection_data entry in your tnsnames.ora file is correctly setup for external procedures.
ORA-28546 connection initialization failed, probable Net8 admin error
Cause: A failure occurred during initialization of a network connection from the Oracle database server to a second process: The connection was completed but a disconnect occurred while trying to perform protocol-specific initialization, usually due to use of different network protocols by opposite sides of the connection. This usually is caused by incorrect Net8 administrative setup for database links or external procedure calls. The most frequent specific causes are:
Database link setup for an Oracle-to-Oracle connection instead connects to a Heterogeneous Services agent or an external procedure agent.
Database link setup for a Heterogeneous Services connection instead connects directly to an Oracle database server.
The extproc_connection_data definition in tnsnames.ora connects to an Oracle instance instead of an external procedure agent.
Connect data for a Heterogeneous Services database link, usually defined in tnsnames.ora, does not specify (HS=).
Connect data for an Oracle-to-Oracle database link, usually defined in tnsnames.ora, specifies (HS=).
Action: Check Net8 administration in the following ways:
When using TNSNAMES.ORA or an Oracle Names server, make sure that the connection from the ORACLE server uses the correct service name or SID.
Check LISTENER.ORA on the connection end point's host machine to assure that this service name or SID connects to the correct program.
Confirm in TNSNAMES.ORA or the equivalent service definition that service 'extproc_connection_data' does NOT contain (HS=), or that the service definition used by a Heterogeneous Services database link DOES contain (HS=).

REPAPI-26525: session connection attempt failed ...

I've got following error-code when I'l use the function
STORECONNECTIONOPEN from the replication OLE control:
REPAPI-26525: session attempt failed for SYSTEM (@POLITE)
What's wrong ? Anybody knows this error ? Exists a complete
documentation of all REPAPI-error-codes ?
Christian Blaha
EMail: [email protected]
[email protected]
[email protected]
null

Christian Blaha (guest) wrote:
: I've got following error-code when I'l use the function
: STORECONNECTIONOPEN from the replication OLE control:
: REPAPI-26525: session attempt failed for SYSTEM (@POLITE)
: What's wrong ? Anybody knows this error ? Exists a complete
: documentation of all REPAPI-error-codes ?
: Christian Blaha
: EMail: [email protected]
: [email protected]
: [email protected]
The message above says the following
REPAPI-26525 Session connection attempt failed for name (@name)
Cause: A connection could not be established to the
specified database using the provided connection string.
Action: Check that the user, password, connect string, names
services, network, and any remote site listener process are
properly installed and working.
The description of the messages can you find under the "Oracle
Lite" Program Group (if you have at least OLite 3.5 installed)
and take "Oracle Lite Message Help" entry (HTML)
It seams that you do not specifiy any password within your
StoreConnectionOpen command. Do it, take whatever you want (if
you have again 3.5 installed; 3.6 is checking the password if it
is correct [new feature in 3.6])
regards
Adrian
null

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

CR2008 - Failed to open the connection. Failed to open the connection. ...

Getting the following error when running CR2008 reports from web server:
"Failed to open the connection. Failed to open the connection. <report_name>{2585477E-FB02-4594-9DB5-FFBFF2ABE124}.rpt"
The web server is a Windows Server 2008 x64. The IIS7 application pool is configured for 32bit, which solved our initial problem. We are getting the above error if we use either CR2008 or CR2008 SP1. Same issue with CRRuntime_12_1_mlb.exe.
If we load CR2008 onto the web server, we can open and run the reports. Thus, there appears to be no problem with the reports or the data source (an Access database). Web application runs on development machine (windows xp).
Why is there a GUID in the report file name? How can we resolve this issue or what else should we check?
TIA, Gary.

Figured it out. Turns out the ODBC data source name had been setup incorrectly. Became obvious when stepping through the code.

Entry using connection AFW failed

Similar Messages

Maybe you are looking for