Connection error in Performancepoint service in sharepoint
hi All,
i am using sharepoint Performance point services 2010 for creating Dashboard.Datasource for Listitem is working fine, but when
i am creating a datasource of tye (Analysis services) .while selecting the database after entering the Server name. it is throwing the following error message.
cannot conect to server. make sure the service is available and is running at least Microsoft SQL Server 2005 Analysis services.
Regards,
Kamal Pundir
Hi,
For this error message, it is sql server analysis service issue.
Please go to your server > start > administrative tools > services >
sql server analysis services(your sql instance name) and
sql server browser to change the log on account to domain administrator or other users with access to sql analysis service and then try again.
Regards,
Seven
Similar Messages
-
Data connection error to analysis services via unattended account after configure kerberos
Hi, I setup connection to SASS from dashboard designer using Unattended Account, and everything was fine. Then I started to configure connection with Kerberos using Per-user Identity authentication, and after long customization it started to work. But in
the same time Unattended Account authentication stopped working.
From dashboard designer I got error:
PerformancePoint Services was unable to connect to "dbserver\instance". Verify that the server name is correct and that the Unattended Service Account has permission to connect to the server.
Additional details have been logged for the administrator.
And in SharePoint server in application log:
The Unattended Service Account "dom\unaccount" does not have access to the following data source server.
Data source location: http://testit/sites/adrian/Data Connections Library for PP/35_.000
Data source name: New Data Source
Server name: dbserver\instance
Exception details:
Microsoft.AnalysisServices.AdomdClient.AdomdConnectionException: Authentication failed. ---> System.ComponentModel.Win32Exception: The target principal name is incorrect
at Microsoft.AnalysisServices.AdomdClient.NTAuthentication.GetOutgoingBlob(Byte[] incomingBlob, Boolean& handshakeComplete)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Authenticate(ConnectionInfo connectionInfo, DateTime startTime)
--- End of inner exception stack trace ---
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Authenticate(ConnectionInfo connectionInfo, DateTime startTime)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetInstancePort(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Connect(Boolean toIXMLA)
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.ConnectToXMLA(Boolean createSession, Boolean isHTTP)
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.Open()
at Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdConnectionPool`1.<>c__DisplayClass4.<GetConnection>b__2()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdConnectionPool`1.GetConnection(String connectionString, ConnectionContext connectionCtx, String effectiveUserName, CultureInfo culture, NewConnectionHandler newConnectionHandler,
TestConnectionHandler testConnectionHandler, String targetAppId)Hi Adrian,
Sorry for misunderstanding and thanks for the additional information.
As I searched, there are tips for your situation:
1. of the great new features of PerformancePoint Services is that you can now select different authentication options for each data source you create rather than having to decide on one authentication model to use for each web application.
2.If SharePoint is configured in standalone mode Per-user Identity authentication is only supported if the data source and the application server are located on the same machine. Kerberos constrained delegation is required to connect to a data source
located on a separate machine from the application server in a farm deployment.
3.Per-user Identity is only supported with Windows credentials, neither anonymous or forms login are supported.
For more information:
http://blogs.msdn.com/b/performancepoint/archive/2010/05/06/data-source-authentication-in-performancepoint-services-for-sharepoint-2010.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2010/06/23/performancepoint-services-troubleshooting.aspx
Regards,
Rebecca Tu
TechNet Community Support -
Configuration of PerformancePoint Service in SharePoint 2013
Hi,
Recently I had configured Performancepoint Service in SharePoint Server 2013.
But i had struck while deploying it into SharePoint through the Dashboard Designer.(i.e.,Deploy option has disable in Dashboard Designer).
So,Could any one help me to produce further steps.
Thanks in Advance.
Regards,
Dinesh
Regards, Dinesh R.Similar issue reported in 2010:
http://social.technet.microsoft.com/Forums/en-US/26596046-0bcb-4a60-aea2-42aabd3e64d2/unable-to-deploy-a-dashboard-with-dashboard-designer-2010?forum=ppsmonitoringandanalytics
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom. -
How to handle network connection error to bussiness service on OSB
Hello everyone.
Thank for your attentions. I need some help for error handling in OSB 11g. I have a proxy service that route to a business service to check profile status. I'm using java client to consume proxy service and return result to customers. The problem that I'm face to is the handling network connection fail.
I want to get some message (or any useful information) from proxy service to report that connection to Business service is unavailable when that connection fail. I tried to add Error Handling but I cannot found that action from option list.
Can you review my proxy service and tell me some resolutions?
Any suggestion is appreciated.
Thank in advance
<?xml version="1.0" encoding="UTF-8"?>
<xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:con="http://www.bea.com/wli/sb/pipeline/config" xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config" xmlns:con2="http://www.bea.com/wli/sb/stages/config" xmlns:con3="http://www.bea.com/wli/sb/stages/routing/config" xmlns:con4="http://www.bea.com/wli/sb/stages/logging/config">
<ser:coreEntry isProxy="true" isEnabled="true">
<ser:binding type="SOAP" isSoap12="false" xsi:type="con5:SoapBindingType" xmlns:con5="http://www.bea.com/wli/sb/services/bindings/config">
<con5:wsdl ref="Test/resources/wsdl/PortalSide"/>
<con5:port>
<con5:name>PortalSideSOAP</con5:name>
<con5:namespace>http://www.example.org/PortalSide/</con5:namespace>
</con5:port>
<con5:selector type="SOAP body"/>
<con5:WSI-compliant>false</con5:WSI-compliant>
</ser:binding>
<ser:monitoring isEnabled="false">
<ser:aggregationInterval>10</ser:aggregationInterval>
<ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
</ser:monitoring>
<ser:reporting>true</ser:reporting>
<ser:logging isEnabled="true">
<ser:logLevel>debug</ser:logLevel>
</ser:logging>
<ser:sla-alerting isEnabled="true">
<ser:alertLevel>normal</ser:alertLevel>
</ser:sla-alerting>
<ser:pipeline-alerting isEnabled="true">
<ser:alertLevel>normal</ser:alertLevel>
</ser:pipeline-alerting>
<ser:ws-policy>
<ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
</ser:ws-policy>
</ser:coreEntry>
<ser:endpointConfig>
<tran:provider-id>http</tran:provider-id>
<tran:inbound>true</tran:inbound>
<tran:URI>
<env:value>/Test/proxy-services/DnICT_WSDL_PS</env:value>
</tran:URI>
<tran:inbound-properties/>
<tran:all-headers>false</tran:all-headers>
<tran:provider-specific>
<http:inbound-properties/>
</tran:provider-specific>
</ser:endpointConfig>
<ser:router>
<con:pipeline type="request" name="GetRequestInfo_pipeline_pair_request">
<con:stage name="InputProcess_stage">
<con:context>
<con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
<con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
<con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
</con:context>
<con:actions>
<con1:assign varName="docId">
<con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b86</con2:id>
<con1:expr>
<con2:xqueryText>$body/por:checkStatus/documentId/text()</con2:xqueryText>
</con1:expr>
</con1:assign>
<con1:assign varName="depId">
<con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b69</con2:id>
<con1:expr>
<con2:xqueryText>$body/por:checkStatus/departmentId/text()</con2:xqueryText>
</con1:expr>
</con1:assign>
<con1:assign varName="srvId">
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7d41</con2:id>
<con1:expr>
<con2:xqueryText>$body/por:checkStatus/serviceId/text()</con2:xqueryText>
</con1:expr>
</con1:assign>
</con:actions>
</con:stage>
</con:pipeline>
<con:pipeline type="response" name="GetRequestInfo_pipeline_pair_response">
<con:stage name="ErrorHandling">
<con:context/>
<con:actions/>
</con:stage>
</con:pipeline>
<con:flow>
<con:pipeline-node name="GetRequestInfo_pipeline_pair">
<con:comment>Lay cac thong tin trong form search</con:comment>
<con:request>GetRequestInfo_pipeline_pair_request</con:request>
<con:response>GetRequestInfo_pipeline_pair_response</con:response>
</con:pipeline-node>
<con:branch-node type="condition" name="branching_public_services">
<con:context>
<con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
</con:context>
<con:branch-table variable="depId">
<con:branch name="SoTTTT">
<con:operator>equals</con:operator>
<con:value>1</con:value>
<con:flow>
<con:branch-node type="condition" name="DnICT_dept_services">
<con:context/>
<con:branch-table variable="srvId">
<con:branch name="DichVu_1">
<con:operator>equals</con:operator>
<con:value>1</con:value>
<con:flow>
<con:route-node name="RouteToDnICT_BS">
<con:context>
<con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
<con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
<con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
</con:context>
<con:actions>
<con3:route>
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4c</con2:id>
<con3:service ref="Test/busines-services/DnictServiceBS" xsi:type="ref:BusinessServiceRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
<con3:operation>selecttrangthai</con3:operation>
<con3:outboundTransform>
<con1:assign varName="username">
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4b</con2:id>
<con1:expr>
<con2:xqueryText>fn:string('stttt')</con2:xqueryText>
</con1:expr>
</con1:assign>
<con1:assign varName="password">
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4a</con2:id>
<con1:expr>
<con2:xqueryText>fn:string('123456')</con2:xqueryText>
</con1:expr>
</con1:assign>
<con1:replace contents-only="true" varName="body">
<con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b49</con2:id>
<con1:expr>
<con2:xqueryText><![CDATA[<soap:selecttrangthai xmlns:soap="http://soapinterop.org/">
<username xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$username}</username>
<password xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$password}</password>
<masohoso xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$docId}</masohoso>
</soap:selecttrangthai>]]></con2:xqueryText>
</con1:expr>
</con1:replace>
</con3:outboundTransform>
<con3:responseTransform/>
</con3:route>
</con:actions>
</con:route-node>
</con:flow>
</con:branch>
<con:default-branch>
<con:flow/>
</con:default-branch>
</con:branch-table>
</con:branch-node>
</con:flow>
</con:branch>
<con:branch name="SoGTVT">
<con:operator>equals</con:operator>
<con:value>2</con:value>
<con:flow/>
</con:branch>
<con:default-branch>
<con:flow/>
</con:default-branch>
</con:branch-table>
</con:branch-node>
</con:flow>
</ser:router>
</xml-fragment>P/S:
When connection to business service is fail, I got this soap message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380002: No route to host</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380002</con:errorCode>
<con:reason>No route to host</con:reason>
<con:location>
<con:node>RouteToDnICT_BS</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>Regards.
Cuong Pham
Edited by: Doubt_Man on Jul 28, 2011 10:26 AMyou could add an error handler on the route-action in your proxy service.
in there you could investigate the $fault variable and for example check which BEA-... errorcode comes back.
then you can decide what to reply back..for example create your own soap-fault and set your own messages.
now the default $fault generated by the osb itself will get returned
http://www.xenta.nl/blog/2010/07/17/oracle-service-bus-11g-handling-soap-faults/
maybe that one helps you a bit -
Did not find the PerformancePoint Services in sharepoint server 2010
Hi Friends,
i have just installed the sharepoint server 2010 in my computer. i want to use it to make scorecards. but i did not find the Performance services in Central administration (services on server)
anyone can help me with this?
QearlPerformancePoint services are available only if you have installed Enterprise edition of SharePoint. If you have installed Standard or Foundation, then PerformancePoint is not available.
Marek Chmel(MVP SQL Server, MCSE SharePoint 2013, MCT, CCNA,CCDA)
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. -
Performance point service for SharePoint List
Hi All,
I've a requirement to create Performance Point service to display in the SharePoint List. List contact single line of text columns.
So i would like to know whether there is any possibilities to utilities this
PPS for this SharePoint List. Please suggest.
Thanks in advance!
Arun PrakashHi Arun,
Could you please elaborate your demand?
Also you can have a look at the blog for using PerformancePoint Services in SharePoint:
http://www.codeproject.com/Articles/783405/PerformancePoint-Services-in-SharePoint
http://blogs.msdn.com/b/performancepoint/archive/2011/09/19/performancepoint-data-connection-libraries-and-content-lists-in-sharepoint.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
PerformancePoint Service Event ID 1
I have already asked this once, And got not one reply.I begging anyone who can help to please shed some light on this..
"An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:
Microsoft.PerformancePoint.Scorecards.BpmException: There was a problem setting the item location URL.
PerformancePoint Services error code 20700."
What I have tried:
Stopped Performance Point Service - Under Central Admin (Manage Service on Server) - must be set on auto start (its running)
Deleted Service application PoerformancePoint Service - Under Central Admin (manage Service Applications)
removed PPS from (parent) -> Site Settings -> Site Collection ADmin ->Site Collection features - PPS (deactive)
removed PPS from (parent) -> Site Settings -> Site Actions -> Manage Site Features - PPS (deactive)
removed PPS from (subsite) -> Site Settings -> Site Collection ADmin ->Site Collection features - PPS (deactive)
removed PPS from (subsite) -> Site Settings -> Site Actions -> Manage Site Features - PPS (deactive)
I've tried everything I could possibly think of to stop these events, and it still occurs, and I can't replicate it...
Is there some way I can generate what "web parts" "templates" "Sites" "ANYTHING" that is using this service so I can stop it?!?!Hey Victoria,
I really appreciate the help on this issue, it has been the toughest thing I've ever had to do, since for some reason administering a SharePoint FE server requires a Ph.D in... convolved setups...
Anyway a couple question based on your reply..
Hi,
The PerformancePoint Service error may be due to its incompletely setup.
Please follow the link below to re-configure the service to see if the issue still occurs:
http://technet.microsoft.com/en-us/library/ee748644(v=office.15).aspx
1) Is there no way to setup and configure SharePoint 2010 without PerformancePoint Services?
It's apparent that these events are due to the fact that PerformacePoint was setup at one point and something failed.. and cause events to be generated... LOTS of events, which could be seen by our Monitoring server..
However my goal was to have the SharePoint 2010 FE server be clean of events, I was hopinh to achieve this by removing the PerformancePoint Service completely from the FE as currently Collective DashBoards, or anything using this service is not being used
in our SharePoint Enviro, so I'd rather not have this service until it comes time that we create and need Collective Dashboards....
But since I'm in literally dire disarray to have a clean event log on this server and my SharePoint skills are very very limited, I contiue to read up on these two services SecureStore and PerformancePoint and I keep getting confused in its complex setup
and requirements..
There are so many Tuts that tell you how to setup A performancePoint Service, PPS App, and link it to a App Proxy.. yada yada, but for instance, in the MS link you provided it stated:
$w = Get-SPWebApplication -identity <web application>
$w.GrantAccessToProcessIdentity("<service account>")
I was finally able to get this to work once I had actaully logged onto the FE server with all the required credentials to do it, but simply running The SharePoint Management Console "AS a different user" wasn't sufficient to work... Even then I was
wondering how to verify that a set service account has required permissions, no no verify permissions cmdlet I could find, so I simply reran the command with the AD account we have setup for PerformancePoint Service, just to make sure I covered every step
in the link you provided me.
While everything completed without issue while setting up the Managed Service Account, Granting it access, starting the PerformancePoint service on the FE server, creating a new PerformancePoint Service Application, and putting it into the default proxy
service application associations, I know I'll prob still get events in the event log... Nothing I have ever done has been able to get me to get this to work... which is why I request any query that could led me to anything that attempting to use this service...
I have removed everything I thought was using it, so now my question really becomes how can one complete remove PerformancePoint Service from SharePoint 2010... goggling leads to
this, but once again doesn't give any information on how to first check to see whats using it before deleting it... Isn't knowing whats using it important before deleting it? Isn't that what Linux does when you go to remove a service or application it warns
you of any services or applications that use it as a dependencies , and state these will not work if you continue with the removal... This is the key I need to know in this setup to locate and stop these events.. What in SharePoint is currently using this
service?!
I found
this, But I'm going to wait a bit it would seem maybe the events have calmed down... but ti is lunch right now so once user go back to using SharePoint They will probably appear again -
An error occurred while trying to connect to a Web service.
An entry has been added to the Windows event log of the server.
Log ID:5567
Correlation ID:4db21044-cbc4-4f2f-8653-d73e5496b891check the log file first to get detailed information, go to ULS log file, find the related Correlation ID, you will get the error message, the information you provided is less helpful to know this issue.
Qiao Wei
My blog:http://blog.goobol.com -
Performancepoint service application error
Hi,
I am new to SharePoint 2013, I have configured the PerformancePoint Service Application. When I tried to create the data source from the PerformancePoint Content section. I am getting the following error.
"Cannot connect to the PerformancePoint, contact the administrator"This might be problem with PerformancePoint service application association.
Go to Central Administration -> Application Management -> Configure Service application associations.
Associate PerformancePoint Service application with your web application.
Hope this will resolve your problem.
Please mark it answered, if your problem resolved. -
An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.
Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS) -
I'm trying to republish the content hub but getting mms errors. I checked the coorlation id but make no sense of it. Any help would be appreciated.
Hi,
According to your post, my understanding is that you failed to republish the content hub.
I recommend to execute the following PowerShell command to add all permissions needed:
Initialize-SPResourceSecurity
In addition, you can create a new managed metadata service application and also a new application pool account to check whether it works.
More information:
Troubleshooting “The Managed Metadata Service or Connection is currently not available in SharePoint
2013”
Upgrade Managed Metadata Service App
Migrate Managed Metadata Service to SharePoint 2013 error
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
HI
Now there is an issue while iam running powershell script for BDC service.
Below is the script i am using to configure BDC service.
Param(
[Parameter(Mandatory=$true,ValueFromPipeline=$true)]
[string]$ServiceName = $null,
[Parameter(Mandatory=$true)]
[string]$ServiceProxyName = $null,
[Parameter(Mandatory=$true)]
[string]$AppPoolAccount = $null,
[Parameter(Mandatory=$true)]
[string]$AppPoolName = $null,
[Parameter(Mandatory=$true)]
[string]$DatabaseServer = $null,
[Parameter(Mandatory=$true)]
[string]$DatabaseName = $null
# check to ensure Microsoft.SharePoint.PowerShell is loaded if not using the SharePoint Management Shell
$snapin = Get-PSSnapin | Where-Object {$_.Name -eq 'Microsoft.SharePoint.Powershell'}
if ($snapin -eq $null) {
Write-Host "Loading SharePoint Powershell Snapin"
Add-PSSnapin "Microsoft.SharePoint.Powershell"
Write-Host "Successfully Sharepoint Powershell snapin Loaded"
Write-Host "Started executing Powershell script for configuring Business Data Connectivity Service in sharepoint farm ..."
Write-Host -ForegroundColor Yellow "Checking if Application Pool Accounts exists"
$AppPoolAccount = Get-SPManagedAccount -Identity $AppPoolAccount -EA 0
if($AppPoolAccount -eq $null)
Write-Host "Please supply the password for the Service Account..."
$AppPoolCred = Get-Credential $AppPoolAccount
$AppPoolAccount = New-SPManagedAccount -Credential $AppPoolCred -EA 0
Write-Host -ForegroundColor Yellow "Checking wether the Application Pool exists"
$AppPool = Get-SPServiceApplicationPool -Identity $AppPoolName -ErrorAction SilentlyContinue
if (!$AppPool)
Write-Host -ForegroundColor Green "Creating Application Pool"
$AppPool = New-SPServiceApplicationPool -Name $AppPoolName -Account $AppPoolAccount -Verbose
Write-Host -ForegroundColor Yellow "Checking if BDC Service Application exists"
$ServiceApplication = Get-SPServiceApplication -Name $ServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
Write-Host -ForegroundColor Green "Creating BDC Service Application"
$ServiceApplication = New-SPBusinessDataCatalogServiceApplication –ApplicationPool $AppPool –DatabaseName $DatabaseName –DatabaseServer $DatabaseServer –Name $ServiceName
Write-Host -ForegroundColor Yellow "Starting the BDC Service"
#$ServiceInstance = Get-SPServiceInstance | Where-Object { $_.TypeName -like "BDC Service*" }
#Start-SPServiceInstance $ServiceInstance
Get-SPServiceInstance | where-object {$_.DisplayName -eq $ServiceName} | Start-SPServiceInstance > $null
Write-Host -ForegroundColor Green "Done - BDC Service is up and running."
Error i am getting ->
Started executing Powershell script for configuring Business Data Connectivity S
ervice in sharepoint farm ...
Checking if Application Pool Accounts exists
Checking wether the Application Pool exists
Creating Application Pool
VERBOSE: Leaving BeginProcessing Method of New-SPServiceApplicationPool.
New-SPServiceApplicationPool : The trust relationship between the primary
domain and the trusted domain failed.
At C:\SP2013Service\BDC1.ps1:67 char:12
+ $AppPool = New-SPServiceApplicationPool -Name $AppPoolName -Account
$AppPoolAcco ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ApplicationPool:
SPCmdletNewIisWebServiceApplicationPool) [New-SPServiceApplicationPool], S
ystemException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewIisWe
bServiceApplicationPool
VERBOSE: Leaving ProcessRecord Method of New-SPServiceApplicationPool.
VERBOSE: Leaving EndProcessing Method of New-SPServiceApplicationPool.
Checking if BDC Service Application exists
Creating BDC Service Application
New-SPBusinessDataCatalogServiceApplication : Cannot bind argument to
parameter 'ApplicationPool' because it is null.
At C:\SP2013Service\BDC1.ps1:75 char:84
+ ... pplicationPool $AppPool –DatabaseName $DatabaseName –DatabaseServer
$DatabaseSer ...
+ ~~~~~~~~
+ CategoryInfo : InvalidData: (:) [New-SPBusinessD...viceApplicat
ion], ParameterBindingValidationException
+ FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,M
icrosoft.SharePoint.BusinessData.SharedService.SPNewBusinessDataCatalogSer
viceApplicationhi guys,
same script i have modified with parametes,in below script i have hard corded values for parameters,and it is executing without errors.
Below is script executing without error->
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
#Settings
$ServiceName = "BDC Service"
$ServiceProxyName = "BDC Proxy"
$AppPoolAccount = "DOMAIN\USERNAME"
$AppPoolName = "BDC SP Ser App Pool"
$DatabaseServer = "SPSQL"
$DatabaseName = "SP2013 BDC"
Write-Host -ForegroundColor Yellow "Checking if Application Pool Accounts exists"
$AppPoolAccount = Get-SPManagedAccount -Identity $AppPoolAccount -EA 0
if($AppPoolAccount -eq $null)
Write-Host "Please supply the password for the Service Account..."
$AppPoolCred = Get-Credential $AppPoolAccount
$AppPoolAccount = New-SPManagedAccount -Credential $AppPoolCred -EA 0
Write-Host -ForegroundColor Yellow "Checking wether the Application Pool exists"
$AppPool = Get-SPServiceApplicationPool -Identity $AppPoolName -ErrorAction SilentlyContinue
if (!$AppPool)
Write-Host -ForegroundColor Green "Creating Application Pool"
$AppPool = New-SPServiceApplicationPool -Name $AppPoolName -Account $AppPoolAccount -Verbose
Write-Host -ForegroundColor Yellow "Checking if BDC Service Application exists"
$ServiceApplication = Get-SPServiceApplication -Name $ServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
Write-Host -ForegroundColor Green "Creating BDC Service Application"
$ServiceApplication = New-SPBusinessDataCatalogServiceApplication –ApplicationPool $AppPool –DatabaseName $DatabaseName –DatabaseServer $DatabaseServer –Name $ServiceName
Write-Host -ForegroundColor Yellow "Starting the BDC Service"
#$ServiceInstance = Get-SPServiceInstance | Where-Object { $_.TypeName -like "BDC Service*" }
#Start-SPServiceInstance $ServiceInstance
Get-SPServiceInstance | where-object {$_.DisplayName -eq $ServiceName} | Start-SPServiceInstance > $null
Write-Host -ForegroundColor Green "Done - BDC Service is up and running."
if any body want need more information please can u respond me to
Email id:[email protected] -
Reporting Services Error activating ReportingWebService.svc in SharePoint 2013
I get below error when i tried accessing System Settings after creating Reporting Services Service Application in SharePoint 2013, looked in to many blogs but didn't find any fix
tried https://social.msdn.microsoft.com/forums/sqlserver/en-US/c2066c96-d8d0-46b5-89ff-abd806b3169d/reportingwebservicesvc-could-not-be-activated
tried http://sharepointconnoisseur.blogspot.com/2014/07/how-to-resolve-requested-service-http.html
and also tried http://sharepoint.stackexchange.com/questions/80118/sharepoint-2010-reporting-services-integration-set-server-defaults-error
but nothing worked
The Error is:
The requested service, 'http://localhost:32843/99f510a2628e4f24a5dbde00a57f0cbb/ReportingWebService.svc' could not be activated. See the server's diagnostic trace logs for more information.
Error Log:
Application error when access /_admin/ReportServer/ReportingServicesSystemSettings.aspx, Error=The requested service, 'http://localhost:32843/9a9f58cdb5b34551921277056e5ebc82/ReportingWebService.svc' could not be activated. See the server's diagnostic trace
logs for more information. Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.ServiceModel.ServiceActivationException: The requested service, 'http://localhost:32843/9a9f58cdb5b34551921277056e5ebc82/ReportingWebService.svc' could not be activated. See the server's diagnostic trace logs for more information. Server stack
trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.ServiceActivationException: The requested service, 'http://localhost:32843/9a9f58cdb5b34551921277056e5ebc82/ReportingWebService.svc'
could not be activated. See the server's diagnostic trace logs for more information. Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)Hi MOSSDeveloper1,
Below is our suggestions:
1, try to open the URL in the Browser directly, then to see what happen. Maybe you can do the next action plan based on the error message in the Browser.
http://localhost:32843/99f510a2628e4f24a5dbde00a57f0cbb/ReportingWebService.svc
2,Try to get the application pool id based on the Reporting Web Service id "99f510a2628e4f24a5dbde00a57f0cbb"
Locate The Web Service in the sharepoint Web services in IIS, then click the advanced setting, you would see the application pool id;
Then Browse IIS manager "Application Pool", select the pool with the ID , restart it.
3,If the above two didn't helpful. tried to reboot the server or the steps below.
Update the web.config in the service host IIS web site and add the following. Set minFreeMemoryPercentageToActivateService to a lower percentage.
<configuration>
< system.serviceModel>
< serviceHostingEnvironment multipleSiteBindingsEnabled=”true” minFreeMemoryPercentageToActivateService=”1″/>
< /system.serviceModel>
< /configuration> -
I have a SharePoint 2013 environment with 1 AD Server, 1 DB Server and 1 APP Server, with 13 Web Applications running under the SharePoint.
Recently I rebuilted the application because of some infrasctrucutre problems, and I was able to solve all of them, except one. I can't connect to any of those 13 Web Apps with SharePoint Designer. When I try to connect, it always ask credentials, then it
seems like loading the site, then the error appears:
"An error occurred accessing your Microsoft SharePoint Foundation site files. Authors - if you are authoring against
a Web server, please contact the Webmaster for this server's Web site. WebMasters - please see the server's application event log for more details."
I've spent hours troubleshooting it, but none of the information I found was valid. I've already tried to clean the cache, but didn't work. I found plenty of related data of this
error with FrontPage and old versions of SharePoint, but nothing helped. All the Web Apps are SPD-Enabled at Site Collection Administration. I've tried connecting from many different PC's. The 15/LOGS folder doesn't get any data from this error, neither the
Event Viewer.
I really don't know what else to do. Please Help!I found the answer of my issue was in a .NET Agent installed by NewRelic on the server. I found a connection trouble with Fiddler, then I end up figuring this out:
This can be the result of Real User Monitoring so the first step in troubleshooting would be to disable it and see how it affects the application. The .Net Agent injects snippets of javascript into the header of pages sent to the users browser to measure the
page load time on the user's end.
You can disable RUM by editing newrelic.config and changing this line:
<browserMonitoring autoInstrument="true"/>
to this:
<browserMonitoring autoInstrument="false"/> -
like 2 weeks ago i called in to att to see how much is the data plan and it would end up costing $30.
so i was like screw that. well they figured that i got a new phone replacing the LG shine. so they asked
for to call this number so they can recieve data which would updated the system that i have a plam treo 750.
ever since this conflict i can't send picture messages. i get that problem. everytime i attempt to send a picture
i recieve this.
- there is a problem connection to the GPRS service in your registered home network.
- then i get a test that says error trying to make data connection. this may be casued by a voice call,
a wired activesync connection or inncorrect network setting.
please someone help me.
btw. hard reset and soft reset did not work for me.
Post relates to: Treo 750 (AT&T)problem fix, i had to call in. customer serivce. and when i called to ask about the plan. they blocked it. so i had to unblock my internet.
Post relates to: Treo 750 (AT&T)
Maybe you are looking for
-
Cannot locate the Cover Flow view in iTunes 11. Is it still active/available?
Cannot locate the Cover Flow view in iTunes11. Is it still available/active?
-
Transaction Code for Marketing Attributes
Hi Experts, Can someone tell me what is the transaction code to maintain Marketing Attributes in SAP CRM 5.2? Thanks a lot,
-
Hello. I'm writing a C program that needs a random number generator. Basically, it will print a different line of text for each number that could possibly be generated. I need it to generate a random number between one and ten. Could someone show me
-
HT3529 I can text some of my contacts, but not all...why?
I can text some of my contacts, but not all...why?
-
icloud 2.0 after installed wants me to repair it as well as outlook 2007 calender will not come up. Any suggestions?