Data connection error to analysis services via unattended account after configure kerberos

Hi, I setup connection to SASS from dashboard designer using Unattended Account, and everything was fine. Then I started to configure connection with Kerberos using Per-user Identity authentication, and after long customization it started to work. But in
the same time Unattended Account authentication stopped working.
From dashboard designer I got error:
PerformancePoint Services was unable to connect to "dbserver\instance". Verify that the server name is correct and that the Unattended Service Account has permission to connect to the server.
Additional details have been logged for the administrator.
And in SharePoint server in application log:
The Unattended Service Account "dom\unaccount" does not have access to the following data source server.
Data source location: http://testit/sites/adrian/Data Connections Library for PP/35_.000
Data source name: New Data Source
Server name: dbserver\instance
Exception details:
Microsoft.AnalysisServices.AdomdClient.AdomdConnectionException: Authentication failed. ---> System.ComponentModel.Win32Exception: The target principal name is incorrect
 at Microsoft.AnalysisServices.AdomdClient.NTAuthentication.GetOutgoingBlob(Byte[] incomingBlob, Boolean& handshakeComplete)
 at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Authenticate(ConnectionInfo connectionInfo, DateTime startTime)
 --- End of inner exception stack trace ---
 at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Authenticate(ConnectionInfo connectionInfo, DateTime startTime)
 at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
 at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
 at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetInstancePort(ConnectionInfo connectionInfo)
 at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
 at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
 at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
 at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Connect(Boolean toIXMLA)
 at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.ConnectToXMLA(Boolean createSession, Boolean isHTTP)
 at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.Open()
 at Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdConnectionPool`1.<>c__DisplayClass4.<GetConnection>b__2()
 at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
 at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
 at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
 at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
 at Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdConnectionPool`1.GetConnection(String connectionString, ConnectionContext connectionCtx, String effectiveUserName, CultureInfo culture, NewConnectionHandler newConnectionHandler,
TestConnectionHandler testConnectionHandler, String targetAppId)

Hi Adrian,
Sorry for misunderstanding and thanks for the additional information.
As I searched, there are tips for your situation:
1. of the great new features of PerformancePoint Services is that you can now select different authentication options for each data source you create rather than having to decide on one authentication model to use for each web application.
2.If SharePoint is configured in standalone mode Per-user Identity authentication is only supported if the data source and the application server are located on the same machine. Kerberos constrained delegation is required to connect to a data source
located on a separate machine from the application server in a farm deployment.
3.Per-user Identity is only supported with Windows credentials, neither anonymous or forms login are supported.
For more information:
http://blogs.msdn.com/b/performancepoint/archive/2010/05/06/data-source-authentication-in-performancepoint-services-for-sharepoint-2010.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2010/06/23/performancepoint-services-troubleshooting.aspx
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

Can't connect to BI Analysis Services Connector

Hi all,
I had tried to connect with BI Analysis Services Connector. I had done all steps, but when I tried to connect with BI Analysis Services Connector, can't view cubes and appear a error message. This don't have specifications.
Technical details:
Activity Id: 3629f200-123e-e7b5-7a6b-6676f47608ef
Request Id: fdfa02e2-4500-3c74-47c5-573a5a97bb9b
Date: 2015-03-27 20:44:01Z (UTC)
I don't undertand what is the error.
Please Help me
Thanks!

Thanks for your reply.
The error I got in the OC4J window is : WARNING java.net.ConnectException: Connection refused: connect
However, I have now been able to login to BI Publisher as Administrator. What I did was uninstall the full OBIEE (Basic) installation, and instead installed the BI Publisher component only, (along with OC4J).
Works fine now, although I don't know why it didn't work with the full install. Any ideas?
Cheers,
Stephen

"The PowerPivot service application could not connect to the Analysis Services instance"

Hi
I am baffled by this one. I have a PowerShell script I have built up to install PowerPivot, which I have put together by reading various blogs and by picking apart the scripts that come with the PowerPivot installer.
However, once I have built the service app and installed/activated the solutions and features, I get the error "The PowerPivot service application could not connect to the Analysis Services instance" when trying to use it. I can't find any
more detailed messages, even with verbose logging turned on. SSAS\PowerPivot is of course installed and connected to Excel as it should be.
I have tried running the PowerPivot for SharePoint validation tool and it doesn't find anything.
If I install PowerPivot using the PowerPivot for SharePoint installer, then delete the service app and rerun my scripts, everything then works fine.
So there is something the installer is doing that I am not, but I cannot for the life of me figure out what it is. I though it might be permission related, but the official installer installs the service under the farm account, not my BI service account.
Ahaa, I thought, but when I then reinstall the service myself with my scripts, using my BI service account, the service app then works, so I don't think it can be permission related.
Doing a Google search on that message pulls up only one old post (repeated a few times), which talks about using a domain account for the SSAS instance instead of a Local System account - I am using the same domain service account for SSAS, Excel and
PowerPivot already, so that doesn't help me much.
Does anyone have any ideas for me or suggestions on how I might proceed?
Andrew vR

Did you run the "Run PowerPivot for SharePoint Configuration Tool" after installing PowerPivot and did that work okay?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Disable/Hide Data connection error pop ups in InfoPath 2010

Hi All ,
I am trying to hide/Disable Error Messages Shown by data connection error. I do not want user to see the error , rather I would check through rules and query the Data source again.
Is this scenario possible at all.
For ex: I have a data connection to user profile server , if it gives and error on form load , I do not want to see the error popup instead i will query the data connection again.
Thanks and Regards,
Nandini

Hello,
what would you expect to change between the first call to the data connection and the second call?
How would you "check through rules"?
I don't think the error message can be suppressed. If you don't want to query the data connection on form load, untick the box in the data connection settings.
cheers, teylyn

Refreshing the Data Source View in Analysis Services

I have added columns to the SQL Database table that is used as a dimension in an Analysis Services Cube. The new columns will be used as additional Property Fields for the dimension. When I attempted to refresh the Data Source view so that the additional columns are present, I am given the following error:
System.Data
Property not accessible because 'Parent Columns and Child Columns don't have type-matching columns'
I have done nothing to the columns used for the parent of child and the error message provides nothing to gon on. Does anyone have any ideas on this?
Gary

Olga,
Thanks for your response. I will try and answer your questions
1) I have not tried removing the columns yet. I will try that this afternoon but have limited hope. The two columns I added are simple text columns that will be used as attributes in the dimension. I have made no change to the parent or child columns.
2) The table I modified is the source table for a parent-child dimension.
3) The reference to the "check list" does not take me to any kind of check list.
4) The parent-child dimensions I am trying to modify have been in use for months and the parent and child columns do have the dame data types.
5) I have also check the data types between the dimension table and the fact table. they use the same data types (small int).
6) I have not made a collection for the parent key, it is a single column. The remainder of your last paragraph is not clear to me. Can you give me an example.
I am fairly inexperienced with Analysis Services, please talk slow and use small words :-)
Thanks again for your help!
Gary

How to move data connections with SOAP web service in different environments in InfoPath Forms 2010

Hello,
I've an InfoPath Form where I've around 10 SOAP web service data connections. They are calling a custom web service for a custom business process. The web service URL has a query string parameter which identifies whether it's a Test web service or the Production
one. The web service URL looks like this:
http://server/webservice/wsdl?targetURI=testSPRead (for the Test environment)
http://server/webservice/wsdl?targetURI=ProdSPRead (for the Production environment)
When I develop the form in Dev environment, I use the Test web service URL and save the data connection as UDCX files in the data connection library. After completing the development, when I deploy this Form in Production, I update the URL in the UDCX
file in the Production data connection library, but when I run the Form in Production, it throws error 'Error occurred in calling the web service'. After doing more research, when I extracted the XSN file and opened Manifest.xsf file in Notepad, I found the
references of 'testSPRead' parameter.
So, in the UDCX file the web service URL is '/targetURI=ProdSPRead' but in the Manifest.xsf file, there is a reference of Test web service parameter which is 'testSPRead' and that's why it's throwing error.
For testing purpose, I updated the Manifest.xsf file and replaced all the occurrences of 'testSPRead' to 'ProdSPRead' and also updated all the relevant files of the data connections (like XML, XSF etc.) and saved the Manifest.xsf as Form.xsn and deployed
in Prod and it worked.
The question is - is this the right way of doing it? There should be a simple method in such cases where web service has conditional parameter to identify the Test and Production web service.
Does somebody know what is the right way of doing it? I also thought of adding 'double' data connections - one set of Test and another set of Production and call them by identifying the current SharePointServerRootURL, but that's a lot of work. I've 10 web
service data connections in my Form and in that case I'll be having 20 data connections and setting their parameters in different Rules is too much work.
Please advise. It's very important for me!
Thanks in advance.
Ashish

Thanks for your response Hemendra!
I hope Microsoft improves this thing in subsequent patches of InfoPath 2010 or InfoPath 2013 because I don't think this is a very special requirement. This is failing the purpose of having UDCX files for data connections. Why the WSDL's parameter value
is being written in the Manifest.xsf and other XSF and XML files. InfoPath should always refer the URL and parameters from the UDCX files.
--Ashish

Connection problems to Analysis Services (local)

Hi everybody,
I can not access to "Analysis Services" in local way with SQL Server Management Studio. I get the following error:
"Unable to establish a connection. Make sure the server is running. (Microsoft.AnalysisServices.AdomdClient)"
"You can not establish a connection because the target machine expressly rejected that connection 127.0.0.1:2383 (System)"
I have checked the related services and they are running:
SQL Analysis Services (InstanciaName) - En ejecución - LocalSystem
SQL Server (InstanciaName) - En ejecución - LocalSystem
SQL Server Reporting Services (InstanciaName) - En ejecución - LocalSystem
SQL Server Agent (InstanciaName) - En ejecución - LocalSystem
SQL Server Browser (InstanciaName) - En ejecución - LocalSystem
I have checked that the only port whitch is listening is the 2382, and not the 2383:
C:\Windows\system32>netstat /abo | findstr 238
TCP 0.0.0.0:2382 ServerName:0 LISTENING 2016
TCP [::]:2382 ServerName:0 LISTENING 2016
Any idea about what is causing the problem?
Thank you.
Best regards,

Thanks for your reply,
The list of services running is the following, before it was an example:
SQL Analysis Services (ALTIRIS) - En ejecución - LocalSystem
SQL Server (ALTIRIS)
- En ejecución - LocalSystem
SQL Server Reporting Services (ALTIRIS)
- En ejecución - LocalSystem
SQL Server Agent (ALTIRIS)
- En ejecución - LocalSystem
SQL Server Browser (ALTIRIS)
- En ejecución - LocalSystem
ALTIRIS is my instancename.
When I try to connect, I put "(local)" in the SQL Server Management Studio, but I get the error.
Best regards,

Customize list using Info-path - Data Connection Error

We have an issue while customizing list using Info-path, we are configured a data connection inside the info-path the connects to SQL and it works fine.
then we decided to migrate it to another site under another web application on the same server, but it does not work, it fires an error as below:
A query to retrieve form data cannot be completed because this action would violate cross-domain restrictions.
If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a
UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services
in SharePoint Central Administration.
An entry has been added to the Windows event log of the server.
Thanks & Regards Ahmed Amin

Under General Applications in Central Admin, go to the InfoPath Settings and Configure InfoPath to allow cross domain connections.
Regards Sergio Giusti 
http://sergioblogs.blog.co.uk Whenever you see a reply and if you think is helpful, click " <img alt="Alternate Text" src="http://social.technet.microsoft.com/Forums/getfile/179394" style="width:12px;
height:12px"> Vote As Helpful". And whenever you see a reply being an answer to the question of the thread, click " <img alt="Alternate
Text" src="http://social.technet.microsoft.com/Forums/getfile/179395" style="width:12px; height:12px"> Mark As Answer".

How to get data from MySQL into Analysis Services Tabular Model

Hi,
I have a problem with Analysis Services Tabular Model and MySQL ... I have to use several MySQL databases as a source of Tabuar Model ..
Is there any way to get connection working from Tabular Model to retrieve data from MySQL database. I have a situation that in MySQL server there is several databases with same schema, one for each customer. I have planned to join these customer databases
to one Tabular Model, create roles and users for each customer to query their data.
What do I have to do to get this working ?
Pasi

Hi ,
In Tabular model out of the box there is no direct connectors available for MySQL. Please see the list of supported Data Sources
http://msdn.microsoft.com/en-us/library/gg492165.aspx
But i think if you can establish a ODBC connectivity with data source to MYSQL , you can use the ODBC connection to retrieve the data from MySQL. Please try this and post the results here if it is possible or not.
Best Regards Sorna

WSDL data connection error after Form Server xdp render

Hi
I have a wsdl data connection inside an xdp after I render the xdp as pdf and reader extend the form when I click on the button to execute the web service method a pop up box appears saying the data connection has no properties. I am using LiveCycle Forms and Reader Extensions 8.1.
Thanks

Hi Paul
Thanks for the reply.
Reader extensions wasn't the problem, it was how I was manipulating the xdp before rendering.
Thanks

Connection error in Performancepoint service in sharepoint

hi All,
i am using sharepoint Performance point services 2010 for creating Dashboard.Datasource for Listitem is working fine, but when
i am creating a datasource of tye (Analysis services) .while selecting the database after entering the Server name. it is throwing the following error message.
cannot conect to server. make sure the service is available and is running at least Microsoft SQL Server 2005 Analysis services.
Regards,
Kamal Pundir

Hi,
For this error message, it is sql server analysis service issue.
Please go to your server > start > administrative tools > services >
sql server analysis services(your sql instance name) and
sql server browser to change the log on account to domain administrator or other users with access to sql analysis service and then try again.
Regards,
Seven

Using SSRS Date Range- Data Not shown for date greater than by Analysis Services

Hello Friends,
I am using Date Range filters(Start and End Date) in my SSRS Report. The Problem is that if i am using the start date will be today, then the end date will be the future date by using Analysis Service as my Data Source, the report is not generated.
I don't know why it happens? If I give the date range filters before the current date, then the report will shown.
The problem is that the future date is not in my database. Could you please answer for this. I am struck in here,.
Table contains : 1-7-14 ,
2-7-14,
3-7-14,
If my Date Range will be 1st to 3 of 7th month, then the report shows the data.
if my date starts with 1st of the 7th month and ends in the future, then the report will not shown the 2nd and 3rd records...
Please teach me why?

Your question should be posted to the appropriate MSDN forum. This forum is for questions regarding Microsoft Certifications.

Issue with Voyager connection to MS Analysis Services 2000

I get the following message -
Login failed.Please check that your username and password are valid.
OS - Windows 2003 server sp2
BOXI R2 - sp4
MS Analysis Services - 8.0.2039
When I set up the Voyager connection
name - test
Provider - MS OLE DB Provider for OLAP Services 8.0 (only one in the drop down)
Server type - server
server - name of the server (bo2k3test)
authentication - prompt
I then put in a uid and pwd for a user that is part of the OLAP Administrators group
Any ideas?
thanks

The username needs to be fully qualified, ie DOMAIN\Username.
So if the username is "Anne" and this is a local account on the MSAS server then you enter ".\Anne" (without the quotes).
Regards

Opening an Excel 2003 file in Office 2010 Universal Data Connection error when opening the file from a domain.

Hi.
One of my users are having problem with old accounting files in Excel 2003 when opening Excel 2010.
The user experience that linked information is not being updated properly.
And suspects that it something do with Universal Data Connection .
How can an Excel 2003 spread sheet be converted to Excel 2010 spread sheet and still contain active links?
When the user is opening and converting the file as mention in your suggestion, on the common share on a common domain, the links "breaks".
we are not using SharePoint on our domain.
But when doing it on a local machine, the links does not "breaks".
Looking forward to get solved to this problem.
Thank you in advance.
Rgds

it sounds link, the links changed from relative paths to absolute path. You need to use absolute path in original file.
KR

Sending Idocs to R/3 Error when Business Service with a party is configured

Hi All,
I'm facing some issue when posting idocs (FINSTA) back to R/3 when Business Service with a party is configured in my Integration Directory. However, I do not have this problem, if the
Business System without Party is configured. It seems that 'adapter specific' setting doesn't
seem to work when you have a party.
I have read the same problem faced by other SDN members as well, some suggested to have the latest patch to solve the problem. FYI, I'm using latest patch SP 15, but the problem still exist. The error that I have in the sxmb_moni is "Unable to convert sender XI party http://sap.com/xi/XI / XIParty / GABXI100 to an IDoc partner".
Please assist. Thanks.

Hi Arun,
Thanks for reply.
What do you mean by XI Party must map to a party in the R3 in the partner profile?
For example, If my Party Name in Integration Directory is ABC01, I should create a partner profile of ABC01 in my R3? How if I have business service under the Party ABC001, what should I configure in my R3?
Currently My Partner Profile in R3 is type 'B' - Bank.
Thanks for helps.

Data connection error to analysis services via unattended account after configure kerberos

Similar Messages

Maybe you are looking for