Connection Failed - The Server May Not Exist

On two 10.4.7 machines, when I try to connect to a 10.3.9 machine, I get a message that the server may not exist. It was working fine last week, then all were shut down over the weekend.
When I choose Network on the Desktop, the server shows up on the list as long as it's running, so the list of available servers recognizes it. Although I'm sure nothing was changed, I've checked and re-checked sharing and network settings on all three computers. IP addresses are correct and so are the names of the computers. I've run utilities on the 10.3.9 machine and one of the 10.4.7 machines. I've restarted every computer. The result remains the same.
Any help would be appreciated.

Only thing I can think of is that a setting did get changed or borked on the 10.3.9 machine.
Appletalk is available in both OSes, but Tiger can no longer do AFP over Appletalk... think it just uses it for "Discovery", so I'm thinking the 10.3.9 machine is trying to communicate via Appletalk instead of TCP/IP.
Have you tried from the Finder>CMDk>afp:// the actual IP of the other machine?

Similar Messages

  • Error "Connection Failed The server may not exist or is not operational..."

    This is just FYI in case somebody else runs across this. On one user account, an error window would pop up every so often that said:
    Connection Failed
    The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
    It turns out that the problem was caused by Screen Saver. The error popped up whenever screen saver tried to launch. On the problem account I had the "Pictures" folder selected for the screen saver, and apparently there must be an alias in that folder pointing to something on a remote server, because as soon as I go to System Preferences and open the Screen Saver panel, I get the error.
    It has been driving me crazy for months but finally I thought to look in Console, where I saw the error "afp_mount[5045] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0x2d03, name = 'com.apple.afp_mount.ServiceProvider'"
    Searching for that error led me to the Macosxhints forum at http://forums.macosxhints.com/archive/index.php/t-53209.html where a user had posted the same problem. Changing to a different screen saver or a different folder for pictures resolved the issue.
    PowerMac G5   Mac OS X (10.4.6)  
    PowerMac G5   Mac OS X (10.4.6)  

    Welcome to discussions leffjay. Good one. Cheers.

  • Since upgrade to Mac OS 10.7.2L , recurring error message: "There was a problem connecting to the server "servername". The server may not exist...etc."

    Since upgrade to Mac OS 10.7.2 Lion, on MacBookPro, recurring (every minute or so) error message: "There was a problem connecting to the server "servername". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network conneection, and then try again." (The server specified is no longer connected or used). The error message must be clicked twice to continue to work on the computer. Time Machine is switched off. No external disks are connected. Keychain entries for "servername" have been removed since the problem arose. Is there any way to prevent this error message?

    I am having the same problem; have tried deleting some of the plist files as others suggested but to no avail.  Tried turning off time machine - that didn't fix it either.  Very dispappointing.

  • I'm trying to connect to my work's VPN.  I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable.  I know that's not the case because my coworkers are connected. Can someone

    I'm trying to connect to my work's VPN.  I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable.  I know that’s not the case because my coworkers are connected. Can someone please help me? 

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

    Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

    Did you reboot the TC? That is always the first step.
    Reboot the whole network if that is not enough.
    If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
    We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

  • Every time I try to connect to my 2TB Airport Time Capsule I get the following msg - "The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and

    Every time I try to connect to my 2TB Airport Time Capsule I get the following message "The server may not exist or is unavailable at this time.  Check the server name or IP address, check your network connection, and then try again."  However, if I unplug it and then plug it in again, I can connect to it.  How can this be corrected without having to unplug it all the time?

    Are you using Yosemite??
    This is stock standard yosemite bug and we have no simple fix for you..
    You can fix it at its source..
    Hack in DNS from Mavericks.. so Yosemite can be raised to a level of reliability above GHASTLY.. !!
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
    Apple still have not fixed it.. and users are now sick and tired of the problem.. so have resorted to what can only be described as extreme measures.. in fact I wonder why people don't just revert to Mavericks.. or earlier.. whatever OS was reliable.. instead of seeing the latest greatest update as necessity.

  • 'The server may not exist or it is not operational at this time.'

    Since updating to 5.1.4 with my crossgrade I get the following message as it looks to each of the Firewire drives in my set... 'The server may not exist or it is not operational at this time. Check the server name or IP address and try again.'
    I know this is supposedly something to do with Appleshare. Any ideas?
    Powerbook G4   Mac OS X (10.4.9)  
    Powerbook G4   Mac OS X (10.4.9)  

    A server you have at one time been connected to is no longer available. You may have your System Settings using a server for a media drive. < </div>
    Your OS is looking for a rogue server. It could be anything that you were connected to at any time in the past that you perhaps forgot to unmount or disconnect from before power off. Servers are usually Ethernet connections, maybe an FTP session or you may have aborted a download.
    However, you might be getting a completely bogus error. Can only suggest your run Repair Permissions once or twice and maybe start form you OS10 DVD and run Disk Utility-Repair Disk. Can't hurt.
    bogiesan

  • Two days ago I started receiving this message,  "The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again." I have no idea what to do or what I did to get this mess

    ssage. I use Time Capsule to store my iTunes library and to back up with Time Machine. Since I started receiving this message, Time Machine is no longer backing up and I can't access my iTunes library. Any ideas what happened? I also use Time Capsule for all of my wireless devices. Apple TV is working fine, my iPads are accessing the Internet fine. I just can't seem to access the information contained on the drive.

    Here is another part of the error message I continue to receive
    "There was a problem connecting to tge server "David-Kimmels-Time-Capsule.local".
    If anyone could help I would surely appreciate. Going crazy not able to access iTunes.

  • The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.

    The above message keeps appearing.  How do I get if out of the way permanently.

    It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
    Lion is also affected but not as badly.
    7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
    Obviously that is not a solution for a later Gen5 TC.
    Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
    If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
    I prefer the very short lease but response has been mixed.
    Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
    And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

  • The server may not exist or it is unavailable at this time

    When I am away from my home office (and home network), I get this error message repeatedly.      Any resolution ideas?

    I'm having exactly the same problem.  I've grep searched all the .plist files in my preferences and deleted references to this volume, but that didn't help.  Clearly FCPX is trying to preload external media for the media browser or something that is referencing this old volume, but I cannot tell what it is. Sadly, FCPX is leaving no more detailed messages about what's going wrong in the Console, either.
    For lack of a better "solution" I'm just moving that box down to the lower left corner, almost completely dragging it off the screen without clicking OK.  You can still use FCPX without a problem.  Just leave enough of the box on the screen so that you can drag it back up and click OK if you need/want to.

  • "server may not exist" error WITHOUT Classic

    Hi,
    My wife's iMac displays an alert reading "Connection Failed: the server may not exist or is not operational at this time", etc. every few minutes. I've turned off all the network-related things I can think of (.mac sync, network time sync, etc) and cleared all of the information in the "Connect to server..." menu item. Also, Classic is not installed on this machine.
    I think this line in the console log is connected to the problem:
    nbp_lookup: zip_getmyzone failed
    If anyone can figure out how to help me get rid of this alert, I'd be grateful! Thanks!

    This is what I get when I try and connect to it...looks like it can't find the devices IP address, buts a fixed ip on a local network. How do I check/change what address it's looking for?
    5/28/14 5:30:04.189 AM NetAuthSysAgent[1451]: FindValidIPAddress - connect failed socket 0, optionValue 61
    5/28/14 5:30:04.223 AM NetAuthSysAgent[1451]: FindValidIPAddress - connect failed socket 1, optionValue 61
    5/28/14 5:30:04.251 AM NetAuthSysAgent[1451]: ERROR: AFP_GetServerInfo - connect failed 64
    5/28/14 5:30:09.814 AM NetAuthSysAgent[1451]: FindValidIPAddress - connect failed socket 0, optionValue 61
    5/28/14 5:30:09.814 AM NetAuthSysAgent[1451]: FindValidIPAddress - connect failed socket 1, optionValue 61
    5/28/14 5:30:09.816 AM NetAuthSysAgent[1451]: ERROR: AFP_GetServerInfo - connect failed 64
    5/28/14 5:30:09.816 AM sharingd[220]: SDSharePointBrowser::handleOpenCallBack returned 64
    5/28/14 5:30:20.403 AM com.apple.usbmuxd[22]: _SendAttachNotification Device 8c:29:37:98:37:4d@fe80::8e29:37ff:fe98:374d._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.

  • Connection Failed: The server "name" may not exist or it is unavailable...

    So I think I know what caused this problem, but I can't figure out how to make it stop...
    When I go to print, if I try to click on the pop-up to change the default printer setting, there's a LONG delay, then I get a dialog that says:
    Connection Failed
    The server "name" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, then try again.
    Then there's another delay and I get the message a second time. I can then select any of my printer settings and print fine, it's just an annoying delay if I click on that pop-up accidentally or need to change it.
    I have a new iMac and I migrated from my old G5. The "name" of the server it is seeking is my old G5, so that must be in the settings somewhere, but I can't find it. I tried going into the Print & Fax settings in System Preferences, deleting the printer there, and then re-adding, but that didn't clear it up.
    Thanks for any insight you can provide!
    --John

    Hmm, well, this stopped working again for me. I tried swapping ethernet and re-installing the Airport client update - to no avail. I could always see my Mac shares from PCs though. However, I have (for now) managed to connect to the PC using ip address rather than name even though finder quite clearly sees the name. Does your printer connection work by ip rather than name ? I'm going to play name lookup detective for a bit now - it's some kind of Netbios name lookup issue I guess as I've no local DNS service. resolv.conf is apparently not used so a bit of learning to do! ...
    ... nmblookup seems to work but nslookup doesn't. Looks like SL connect via Finder isn't using nmblookup properly and I can't see how to make that work. When this gets reported enough it should get a publicised work-round or a fix. If only I can get dig/nslookup to slave out to nmblookup ...must be something I can configure for that ??

  • '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

    '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
    I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
    Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
    Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

    It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
    Lion is also affected but not as badly.
    7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
    Obviously that is not a solution for a later Gen5 TC.
    Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
    If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
    I prefer the very short lease but response has been mixed.
    Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
    And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

  • Connection failed - The server "name" mayt not exist or it is unavailable..

    I've been connecting my 24" iMac with my 15" MacBookPro either over the WiFi or via Ethernet for months to share hard drive space & to save time transfering files constantly.
    But now, all of a sudden, I'm getting the following error message:
    +*Connection Failed*+
    +The Server "MacBookProName" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.+
    After this, I succeded in being able to connect via Share Screen and via Web Sharing. It is only not working when I access through finder. Also, it's not letting me click on "Connect As..." so I can't check if it's entering the correct info too.
    Both Macs are 10.6.6 and both have software fully updated.
    Help!?

    Fixed.. Was firewall settings on the MacBookPro

  • UBE: Retrieve of UBE file failed. The file may not exist on Enterprise Serv

    Hi,
    I'm getting the following message in my pdf file , after running the batch R3465 :
    UBE: Retrieve of UBE file failed. The file may not exist on Enterprise Server.
    What does that mean ? Can anyone help ?
    Thanks,
    thiensu2810

    Thank you for your good suggestion. Here is what the new home folder permissions looks like:
    Last login: Fri Dec 22 14:45:24 on ttyp1
    Welcome to Darwin!
    Louise-Heifetzs-Computer:~ joy$
    Louise-Heifetzs-Computer:~ joy$ id
    uid=503(joy) gid=503(joy) groups=503(joy), 81(appserveradm), 79(appserverusr), 80(admin)
    Louise-Heifetzs-Computer:~ joy$ ls -ln
    total 0
    drwx------ 3 503 503 102 Dec 16 18:39 Desktop
    drwx------ 3 503 503 102 Dec 16 18:39 Documents
    drwx------ 22 503 503 748 Dec 16 18:45 Library
    drwx------ 3 503 503 102 Dec 16 18:39 Movies
    drwx------ 3 503 503 102 Dec 16 18:39 Music
    drwx------ 4 503 503 136 Dec 16 18:39 Pictures
    drwxr-xr-x 4 503 503 136 Dec 16 18:39 Public
    drwxr-xr-x 7 503 503 238 Dec 16 18:52 Sites
    Louise-Heifetzs-Computer:~ joy$ ls -ln /Users
    I see the differences between the two, but am not sure how to proceed. I feel in over my head and would be grateful for guidance. Many thanks.

Maybe you are looking for

  • Can't update iPod, "required file is in use."

    Whenever I connect my iPod to either my work computer (a PowerMac G4) or my laptop (a PowerBook G4) I get an alert message in iTunes that reads, 'The iPod "Thomas's iPod Mini" could not be updated. The required file is in use.' This message sometimes

  • LKM File to Oracle (SQlLDR) giving errors

    Hi, I am using ODI to load data from an ascii file ( pipe separated) to an Oracle Table. So I created a Interface with LKM as "File to Oracle (SQlLDR)" and IKM as "SQL Control Append". CKM is "CKM Oracle". I am using ODI Studio 11g with jdk 1.6 and a

  • Use opengl and directdraw

    hi all, i have enabled opengl and directdraw in jvm, and the statement is correct, but i find the graphics rendering does not accelerate compared with not enabled. does anyone know why is that?thanks

  • Forms 6i debug and call_form

    In Forms 6i, I have a form that calls another form using call_form. When debugging, I can set breakpoints in the calling form, but there seems to be no way to continue debugging into the called form. Or is there...? Can you help...?

  • Need help with SQL or PL/SQL

    Hello I have been educating myself in the world of Apex and SQL programming by utilizing the provided "How to Build an Issue Database" from the "2 Day AE Developers Guide. PDF.” I have also been watching this forum and have learned a great deal! My q