Connection keeps failing

I am trying to connect to my SAP system using Crystal reports but I get this error below each time. I am using the application server listed on my logon pad and the user name and pwd I normally log in with. Do I need to change some settings in ECC in order to allow for the connection. Thanks for any help/suggestion
Error Group
RFC_ERROR_COMMUNICATION
Message
SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=192.168.28.236, GWSERV=sapgw00, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '192.168.28.236:3300' not reached
TIME        Thu Oct 27 10:43:17 2011
RELEASE     710
COMPONENT   NI (network interface)
VERSION     39
RC          -10
MODULE      nixxi.cpp
LINE        3139
DETAIL      NiPConnect2: 192.168.28.236:3300
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     7

Moved to SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
If it's CR 2011 install the Transport on the SAP Server which is located in this folder:
...\win32_x86\release\packages\CrystalReports\Collaterals\Add-Ons\SAP\Transports
Older versions of CR you need to download the SAP Integration Kit.
Try searching this forum for more info also.
Don

Similar Messages

My wireless connection keeps failing.

My wireless connection keeps failing. I turn off the wireless and it resets and works however it is temporary. Any suggestions. I bought my Airport Extreme 11/2012

Hey there Chrismcknz,
It sounds like your Wi-Fi connection from your Airport is dropping and when power cycled works for a very short period of time before stopping again. I would next try a hard reset, and test the issue. Then if needed reset it to factory default and test again. The following article explains what the resets do, and how to do them:
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Hard reset: Resets the base station back to an unconfigured state, but retains the last saved configuration and any profiles so you can restore your base station from previous settings.
Factory default reset: The same as a hard reset but also removes any saved configurations or profiles.
Thank you for using Apple Support Communities.
Regards,
Sterling

BROADBAND CONNECTION KEEPS FAILING ! Over Six mont...

Hi all
I have broadband option 1, I never exceed my download limit. Sometimes it works fine with connection speeds between 4 and 8mb/s and I am happy with that. I use Hub 3 now on a wired ethernet connection with Wireless disabled most of the time unless I am on the laptop.
However about once every 2-3 weeks, and then every day for 7-10 days my connection goes down completely - I lose broadband altogether for between 1 and 4 hours a day. It sort of sporadically comes back up during that time but its at dial up speeds and I cant even load a full page of Google, so basically I am without a connection. Its usually in the afternoon, starting about 3-4pm or in the evening staring about 8-9pm. It has never once happened in the morning ! Ever !!!
I have tried emailing and ringing BT help desk well over 50 times in the last 6 months. I have been fobbed off with every nonsense excuse under the sun from "you are working offline" to "sometimes web pages are too busy to be loaded". I have changed my hardware to the latest Hub 3, changed all my microfilters & hub wiring. I have uninstalled my Antivirus & Firewall, Reinstalled it (Norton 2011), run full virus scans daily, done Windows updates, even tried THREE completely different PCS.
The problem persists with the same symptoms on each PC.
I think its safe to say that this isnt a problem at my end. Its sporadic. Sometimes my PC is on when it happens and I just lose the connection. Sometimes its off and when I turn it on the connections not there.
Obviously I have tried rebooting, resetting the modem, going through the whole BT online Help process but none of this brings the connection back, basically I just have to wait.
One thing I have noticed is that when this is happening my connection speed changes (initially 4-5 then 5-6 etc and currently 8-9). I have put this forward to BT as an issue - IE that they are changing my line speed and thats why my connection becomes unstable but their senior engineers deny this completely (I have the email).
So I am stuck guys.
The helpdesk is manned by very polite individuals who are friendly and try to be helpful but sadly all they do is read from Crib Sheets and really cant help at all.
On Friday they ran a line test while my broadband was down and found a fault, I was supposed to get a call back on Saturday but of course being BT that never happened so I am still waiting.
Any thoughts - I am pretty shocked BT have allowed this problem to persist for 6 months - I expected better !

Hi thanks for that. I am connected to the master socket as far as I know its a plain socket with no lines across and the plug is dead center. There is a second socket in the kitchen with a phone there is simply no way I can connect a PC to that socket and leave it there for several days to try it.
I cannot run the Speed Test - it just times out although I have run it in the past. When my connection is failing I cannot even OPEN the speedtest page let alone run it. Given that this is an intermittent fault isnt it just pointless running these things when its all working ?
When I run the quiet line test on the phone I hear a constant faint Hiss, its a corded phone so I should hear nothing - so that might be a problem
My router stats are below. ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 06:53:15
Downstream:
11.93 Mbps
Upstream:
1.067 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.4 dB / 6.1 dB
Line attenuation (Down/Up):
25.2 dB / 13.8 dB
Output power (Down/Up):
20.5 dBm / 12.4 dBm
FEC Events (Down/Up):
543941 / 657
CRC Events (Down/Up):
340 / 40
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
9590 / 13
Error Seconds (Local/Remote):
198 / 5
Why the heck did I have to come to the forums to find this out - why couldnt the help desk have asked me for these things ??????
Angry - yeah I'm angry !

Branch Office DC Demand Dial VPN connection keeps failing

here is me issue
Our Branch Office DC is connected to Main Office DC with a Demand Dial Connection in RRAS Everything is connected fine for a little bit then its like the connection just gives out, it stays connected but i cannot ping the branch office DC with the local
IP from the Main Office or access any network shares on it. When this happens i have to disconnect the server at the remote office and wait for it to reconnect im currently baffled as there are no Error LOGS to help me along and there doesnt seem to be anything
that would be causing the issue for now until i get some answers as to what is going on i opened a command prompt on the DC here at the main office and i typed "ping 10.141.70.25 -t100" to monitor the connection more or less and when i see it timeout
i reconnect it, i also have the networking tab open in task manager to monitor the LAN and RAS (Dial-In) Interface the LAN doesnt seem too active but the RAS Interface does its got a constant network utilization of 0.28% and the Demand Dial interface
on the remote office DC has a Utilization of 0.38% (Server Just disconnected as i was typing this and the utilization on the VPN connections on both servers went through the roof) heres the troubleshooting i have tried so far
1. Rebooted both office DC`s at the same time
2. Rebooted the branch office DC alone (this helped a little because the connection is staying active longer without fail)
3. looked through all RRAS configuration on both servers to see if theres any mistakes by any other administrators (None Were Found)
4. Used wireshark to see if there was anything interfering or that would cause this to happen (Nothing found)
5. manually connected to the server in multiple ways like accessing network shares and remote management via MMC and manually making the servers replicate to see if any of that was causing issues and it wasnt
My thoughts: im starting to think it may be a switch or something causing the connection issue at the branch office because the main office has all new routers and switches and just recently got a 100.00MBPS connection but nothing was affected for a good
month so im not thinking it is the new connection or anything at the main office if theres something im overlooking here please let me know if some ipconfig /all results are needed i can provide them
Viper Technologies Computer Repair Putting The Venomus Bite Back In Your Computer We Are Located In Antigonish ,NS Canada Check Us Out HTTP://WWW.VIPERTECHNOLOGIES.TK

Hi,
Are there any error messages on the event log ?
Meanwhile, it is more network issue, i think you may ask in network forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverNIS
Regards.
Vivian Wang

Hp office jet 6700 (Mac)-wireless connection keeps failing...

Hi-I am hoping that someone has a solution for this. We have an HP Officejet 6700 that has worked flawlessly till last week. The wireless signal keeps dropping. I think that is the issue because if I go into Setup on the printer itself and go to Network and start all over with finding my router, it works fine. For one print job. Then if I have something something else to print I have to go through that whole setup routine again.
If I just go to Print it says locating printer and then it says that the printer is not connected. What is going on?? Very frustrated. I tried uninstalling and reinstalling the driver (I downloaded the driver from the HP website). That didn't fix it. I saw that there was a firmware update but couldn't install it even though I plugged my laptop into the printer with a USB cord.
Something is going on that I don't have a clue in how to fix it. I really appreciate any help. Thank you, Judy

Hi mrstucci,
I would to help you establish a more consistent connection between your Officejet 6700 printer and your Mac. Please use the following document to troubleshoot the issue; Printer Does Not Maintain Wireless Connection.
If the issue persists, please also take a look at this helpful document; 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X.
Please let me know if this resolves the issue of if you require further assistance. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Mouse connection keeps failing

My wireless mouse has developed the lovely problem of just losing it's connection. After a minute or two it comes back. There has been no battery warning so i don't see that as the problem.

I couldn't get into the link to check the wordage (Apple are repairing the system) but if it is not mentioned, do check out the BRAND of the batteries. Where did you buy them, were they discounted, are they a brand name like Duracell, Energiser or Apple's own.
Many batteries supplied on the cheap are not exactly the same size and that can cause a loss of connection. Is the green light steady, or if you shake the mouse does it flicker or even rattle?
All things to look carefully for.

Why does my wireless connection keep failing?

Each time I boot up my MBP, the wireless connection does not work. I have to go through the self diagnostics after bootup and then it works fine. Anyone know why this is happening?

figured it out...no issue after all

Since installing mavericks my imac keeps failing to connect to the internet

what is wrong with my mac i have just installed mavericks and my internet connection keeps failing any ideas

Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart your router and your broadband device, if they're separate. Any change?
If possible, connect to your router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
Start up in safe mode and test. Any difference?
Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

Can't get iCloud to back up on IPhone 5. Have 7.1 GB available. Backup keeps failing while I am plugged in and connected to wifi

Can't get iCloud to back up on IPhone 5. Have 7.1 GB available. Backup keeps failing while I am plugged in and connected to wifi. It will show backing up now and estimated time 20 plus hours and always ends up failing after a couple hours

You need at least 50 MB of free space in order to back up to iCloud. Rather than backing up, have you tried importing the photos to your computer and deleting them from the camera roll as explained here: http://support.apple.com/kb/HT4083?

Flash Player download keeps failing with lost connection and then gives up. satellite Internet connection

Win XP. Firefox 34.0.5 (latest)
The Flash Player download keeps failing with lost connection and then gives up.I am on a satellite Internet connection.
It seems to be extremely slow even when loading the installer which is only 1MB. Then when I run the installer and it starts to download the installation there are frequent messages about losing the connection and then finally gives up.
I have had problems with other software failing when I am on a satellite link. This is most likely because of the huge latency which may be taken as a link failure. Ping times are typically 800ms but can be 2000ms sometimes!

Hello,
The online shim installer, which you are using actually downloads and installs Flash Player silently in the background. If your satelite connection is experiencing latency issues it could result in the failure to download. Please try the full installer posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria

HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

IPad not recognized by iTunes, recovery keeps failing.

I have not yet seen a real suggestion as to troubleshooting steps for this issue on these discussions.
The iPad is not recognized by any MB Pro except in recovery mode. I have tried different cables and different ports on different laptops. iPods are recognized. iPad works normally otherwise. Recovery keeps failing. After sitting in recovery mode for a few minutes, the iPad either shuts off or goes back to normal operating mode.
iPad recognized sometimes by iPhoto.
I've tried all the stupid suggestions support had; erase and reinstall, remove iTunes and all files,
reinstall. (Dumb because the issue occurs on all MB Pros)
No one has had any answers on this issue on any posts on discussions.
iPad phone support keeps transferring me to MB Pro support (who's only TS answer to any problem is erase and install) who transfer me back to iPad who only know recovery and "I've never seen this problem before" or "it should work"
So, what is next? Wait and see if Microsoft comes up with a working product?

On my iMac-22" , I encountered the same problem with a 3G iPad/ 64 GB .
Tried iPad-reboot , and resetting prefs. etc., other cables ,and iPhone & iPods were recognize but iPad was not.
Tried re-installing iTunes , but after connecting - no Pad.
Did a reset and the connection-symbol didn't show on th IPad screen... instead
it went straight to black , or operarting /Home screen .
I had the Pad a week, and only sync-ed it once before ( though I did
break off an automatic upload of my entire iTunes Library , changing it to manual picking ,but transferred fine on to the Pad ).
Good to read similar (or same?) problem ; indeed :
not many Forum-subjects on this yet.
I'll update and answer on here after resolving.
thanks

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing.

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing. I went through the process of clicking through the how to's and the troubleshooting and came to the conclusion that I need to install the adobe drive 5 but I can not complete the installation. I may be incorrect on this so I need immediate assistance as I have poster and ad deadlines. I also tried disabling the gatekeeper and solution 3 on the troubleshooting of slow saving on photoshop.
Any help is much appreciated!
Thank you!

Are you attempting to save the file to a network location instead of your local hard drive? If so, this is probably why you are encountering an issue and why Adobe Drive would be the solution. As we've documented, it is a bad idea to open from or save directly to a network source: Networks, removable media | Photoshop | CS4 and later. Drive can help you get around this by setting up an Adobe supported virtual connection to the network. Thus, if installing Adobe Drive is the solution you need and your need help with installing Drive, please post to the Downloading, Installing, Setting Up forum.
If you are not saving to a network location, then Adobe Drive is not going to be the answer. Then we'll need to know more about the file you are saving.

I'm trying to download the adobe creative cloud app so I can get Photoshop CC but it keeps failing and I get this pop up with Error Code 205

I'm trying to download the adobe creative cloud app so I can get Photoshop CC but it keeps failing and I get this pop up with Error Code 205. What does that mean?

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

I just bought a new iPad 2. It says I need to update the software but it keeps failing., I just bought a new iPad 2. It says I need to update the software but it keeps failing.

I just bought a new iPad 2. It says I need to update the software but it keeps failing., I just bought a new iPad 2. It says I need to update the software but it keeps failing.

Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore

Connection keeps failing

Similar Messages

Maybe you are looking for