Connection Source
I try to do a program using [Sun One Studio4] this program connect to the DataBase
, I use [ConnectionSource] JDBC tool to connect to the DataBase and it work successfully in the [Sun One Studio4] environment .
The problem is when I try to run the main class using [JAVA.EXE] I see this message:
[Exception in thread "main" java.lang.NoClassDefFoundError: org/netbeans/lib/sql/
ConnectionSource
at Test.initComponents<Test.java:27>
at Test.<init><Test.java:18>
at Test.main<Test.java:67>]
Put when I delete the [ConnectionSuorce] JDBC tool, the program work.
I think the problem in the [ConnectionSuorce] JDBC tool.
Thank you
<Ashraf>
The error message tells you that ConnectionSource couldn't be found on the classpath.
I have never used Netbeans, so I can't tell you which jar-file that contains, but you can probalby find it if you perform a search within files on the disk.
/Kaj
Similar Messages
-
DB connect source system creation in BI
Hi,
I would like to create a DB connect source system to an external MSSQL 2005 database in RSA1.
The external MSSQL 2005 database is setup using Windows Authentication mode.
Question: Which user actually should I specify when creating the source system in RSA1? or which user should I assign the db_ddladmin role in the external MSSQL database?
Many thanks,
YJ.Hi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des. -
Errors occurred during extraction of the existing UDC Connect sources
HI ALL,
I try to create a DataSource with UD Connect on BW 3.5,
i choose a RFC destination, but after of to choose UD connect source appear the next error message "Errors occurred during extraction of the existing UDC Connect sources".
The RFC destination is OK.
In the CCMS Monitor the Java Connectors and Enterprise Java Beans are available.
Help me please!
regards!Hi, me again, I change some parameters and now is working but wrong!!!!! when I try to select a UD connect, in the match code i get the next list:
6B偡浡彏啔䐠#############
#########彏啔###########
#############偡浡彏啔偡浡彏啔
please if anyone knows what is going on help me...!!
tnx -
Are DB connect source systems also created in SM59 or just directly in RSA1? Thanks
Check out the following Links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
Step by step guide.
http://www.slideshare.net/blackwhites/sap-bw-connect-db -
Not display views/tables on DB connect source system
Dear Experts,
After creating a oracle DB connect source system, I want to create data sources based on oracle db. But it is not showing any view/table.
Connection is up and running.
Please advice.
Thanks,
ThiliniHi Thilini,
Are you sure that the DB user on Oracle has sufficient authorizations?
Does the search help support wildcards? Did you try w/o any wildcard or enter a table or a view name supplied by your Oracle DBA?
Best regards,
Sander -
Change a migrated DataSource for DB Connect Source System
Hi,
I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
1. select database TableView
2. choose Edit DataSource
3. fill in the field Application Component (default stated NODESNOTCONNECTED)
4. generate datasource
Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
How can I do this ?
When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
Thank you in advance for your help. Kind regards, MinouschkaHello,
We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
Were you able to complete this and if so how did you do it?
Thank you,
Rick -
Problem in creating DB Connect source system
Hi All,
Iam creating a DB Connect source system to a legacy ORACLE database.
Since my legacy database is ORACLE, I have given the TNS name as the connection info.
The source system got created successfully. but the problem is, upon clicking on 'datasource overview', the system has to generate an application component hierarchy. But it is showing the same application component hierarchy which is there for flat file source system, and iam not getting the option to "select Database Tables" where i can create and edit the datasource.
please help me out.
help would be appreciable and carry reward.Hi,
Create source system first.
you have to select the option "Database system (Data and meta data using SAP DB Connect)".
Now enter the database specific information.
DBMS:
Username:
Pwd:
Conn. Info:
Conn. Info should be the TNS name if it is oracle database.
after giving the relevent information save it, and come back. Source system will be created.
Now right click on source system and select the option " select Database Tables". it will show you the list of tables or views on that database.
select the table/view on which you need to create data source, and click on "edit datasource" there you can generate datasource.
after creating the datasource, replicate it... adn proceed.
any doubts plz ask me.
Message was edited by: suman dara -
E-business Suite RMAN cloning without connecting source
Hi,
I've RMAN backup with catalog and nocatalog. I want to use my nocatalog RMAN backup to clone e-business suite R12/11i Application without connecting source.
Please advice/sugegst any doc.
thanksHi;
What is your EBS and OS?
Please check below notes which cover RMAN cloninig steps:
Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]
Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1]
FAQ: Cloning Oracle Applications Release 11i http://ID 216664.1
Also check below thread:
Clone -with rman
Re: backup procedure using RMAN for 11i Instance
Hope it answer you
Regard
Helios -
Error When Extracting the UD Connect Source Objects
Hi,
I am working on UD Connect to extract data from an external Oracle Database System. I have done all the required configurations from the Visual Admin and BI side.
When I click on F4 help on 'UD Connect Source Object' in the 'Extraction' tab of Application Component, I am getting a message " Extraction of existing UD Connect data source objects". But, the message reamains the same forever. I mean, the source objects(tables) are not displayed.
Message no. RSDS_ACCESS030
But, this is working fine in the Web.
1) We have tested the BI JDBC Connector using the URL:
http://xxxabcdev03:50000/TestJDBC_Web/TestJDBCPage.jsp
We got the list of tables displayed, implies connector is configured properly.
2) When we are trying to configure the Source system in rsa1->modelling->source systems-> UD connect -> create,
following are the values given:
a) RFC: The RFC we have created from BW to Java.
b)Logical System Name: We have manually typed in free text 'UDC_local'. Could you please clarify do we need to type in manually or select the logical system name from the F4 help?
Which logical system name should we enter here exactly.. pls clarify.
Do we have a seperate logical system name for the J2EE server...?
c) Type of Connector : JDBC
d) name of connector: SDK_JDBC
e) Source system name: SDK_JDBC
f) Type and Release : blank
Please clarify, if we went wrong anywhere.
Regards,
Srinivas.Hi Srinivas,
even i am facing the same problem,had you resolved it,if so pls help me out in resolving
i have been in the same approach and even i am not clear with the logical system name(i have give a generic name) and even i tried given with the bi logical system name but it shows source system has got the same name as bi.
i got struck there,pls guide me
thanks in advance. -
Assigning UD Connect Source Object to BW
Hello,
We are Facing an error " An error occurred in step 1 during generation of
the function module" while we are trying to Generate DataSource Object via UD Connect Source Object.
Connection with the UD connect is also Fine.
Pointers regarding this would be really helpful.
Regards,
MayankHi
We are trying to generate a FM through this Generation of dataSource. -
"unable to charge battery with connected source"
About 2 weeks ago I had to do an accessory RMA, since the "prongs" on my cords were almost non-existent. I received the new cords and things seemed to be fine.
Today, though again, my charging cord seems to feel "loose".
Today, while charging my PlayBook I do not see the "lightening bolt" across the battery, a "glow" appears in the upper left corner denoting new updates and I have a yellow triangle with an exclamation mark in it and the message, "unable to charge battery with connected source".
I admit that I am at a loss on this one.
I am running 1.0.7.2670 OSThings that might help us help you:
1. Is this the included charger, which plugs into a wall socket and the USB port (in the middle of the three)?
2. Which "prongs" are you talking about? Usually the term would be used only, if at all, for the two/three metal prongs that stick into a wall socket. If you're talking about the other end, where it plugs into the USB port, it's hard to imagine what you mean by them being "almost non-existent".
3. What country are you in? Different chargers are used in different countries, and this may be relevant here.
4. Do you know anyone else with a PlayBook, so you could compare the behaviour by swapping cables, seeing how theirs fits, etc?
Peter Hansen -- (BB10 and dev-related blog posts at http://peterhansen.ca.)
Author of White Noise and Battery Guru for BB10 and for PlayBook | Get more from your battery! -
Connection Source for .... failed because the environment is not trusted
I got a message like this -
Connection Source for .... failed because the environment is not trusted
when trying to bind a field to a data connection field. What does this mean? I setup the data connection and it tested out fine.I am not exactly sure what you are referring to by the see "Note". I didn't find a "Note" that was related. The only thing I did find was the following:
"If you are using external data sources in a form design that you want users to fill in Adobe Reader, you must set usage rights for the form by using Reader Extensions Server."
I am only trying to display back information out of a database. I don't want to write information. Is there any way to get around this?
Matt -
How to create UD Connect Source system and datasources.
I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
Edited by: Amit Pal on Feb 19, 2008 6:17 AMHi,
Pls chk this link;
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
hope these helps,
Regards
CSM Reddy -
When I connect an input to DI channel of USB 6501 card from my board which has sourcing Output t, iIn the Off state it is not pulled down properly. The volatge on the port in is 2.1V -2.5V based on the pull down resistor on my board. I suspect that it acts as a voltage divider.
The state on the card is still show as "HIGH "state, even my sourcing output driver has a pull down resister. when I use this interface board for PCI mseries devices it works fine. Do the pull down resister on my sourcing output is not worth. Is this because of pull up resister 4.7k inside USB card 6501.
USB 6501 specifications shows the Digital input accepts both source and sink modes. By default the card is in sourcing digital input mode. How do we can convert this in Sinkind digital input mode.
Could anyone Please give your suggestions to overcome this issue .
Thanks you.You really should not have both a pull up and pull down on the same line. Really weird things can happen. If you insist on having a pull down on your board, then I highly recommend putting a digital buffer chip between the DAQ and your board.
Some boards with DIO have a pull up, while others have pull down. You just have to watch the specs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Issue in while connecting Source system
Hi All,
I mistakenly Ran the function module RSAP_BIW_DISCONNECT in BIW, I suppose to run this FM in Source system side,
We observed that Source system in RSA1 (BI) has been deleted), and also one record from the table RSBASIDOC (which is from source connection) has been deleted .
When I try to create he source system in BI, after entering logical system and ALEREMOTE and BWUSER logins, it was asking me to login to source system, after entering the details,
A pop-up message:
RFC destination already exists in source system
Do you want to use this destination, check, or
cancel source system connection?
options: USE, CHECK and Cancel, -> We pressed USE
Then it came back to RSA1 screen and a pop-up message
Connection BA is used in the ERQXXXX
source system as a connection BWQXXXX to BW.
Do you want to delete this connection in the source system?
Connection Is Restored After It Has Been Deleted Successfully
Options: Delete, Do not delete.
When we go for Delete : It is saying that "Error in source system ERQXXXXX"
Thanks in Advance,
TeenaHi,
Please find the link which might help you:
http://help.sap.com/saphelp_nw70/helpdata/EN/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Best Regards,
rajani -
DB Connect Source System Creation
Hi,
I am trying to create source system (DB Connect) to extract data from SQL Server to BI.
I had user id/pwd in DB who is authorised to read view created by DB personnel.
n BW Description of Database Connections Screen
There are two fields
CONN.INFO and PERMANENT
What is the functionality of those 2 fields and from where can i get CONN.INFO
Thanks
KrishnaHi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des.
Maybe you are looking for
-
Some of my artwork (album covers) have disappeared and been replaced by some funky designs??? I don't know what I clicked on to make this happen but they seem to be disappearing more and more? I copied the artwork from my other computer and put the
-
Logic 7.1.1 and MIDEX8 USB MIDI Interface
Anyone had experience using the Yamaha/Steinberg MIDEX8 USB MIDI Interface with Logic? I've just moved from the PC to Logic on the Mac and since I already own the MIDEX8 I wanted to check first to see that it worked well with Logic before trying to i
-
Error installing grub boot loader
I am currently following the beginner guide for installing arch, and once I get to the place where I need to install a boot loader and use the command pacman -S grub-bios, I get a seemingly never ending output of "sh: /usr/bin/wget: no such file or d
-
7.3 iTunes :service 'iPod service' (iPod service) failed to start."
Please help me i'm desperate. Ok so, i go to update and charge my ipod and when i plug in my ipod and open ituens it says that i need to download 7.3 for some reason i didnt think much of it. basically i tried downloading it, and when it go to the ve
-
Google calendar appointments not showing on iPhone calendar
All my Google calendar appointments used to show up on my iPhone's calendar. Now they are not showing up on my iphone's calendar. What is interesting is that appointments made prior to last week are showing up on the calendar. However, apppointments