Problem in creating DB Connect source system
Hi All,
Iam creating a DB Connect source system to a legacy ORACLE database.
Since my legacy database is ORACLE, I have given the TNS name as the connection info.
The source system got created successfully. but the problem is, upon clicking on 'datasource overview', the system has to generate an application component hierarchy. But it is showing the same application component hierarchy which is there for flat file source system, and iam not getting the option to "select Database Tables" where i can create and edit the datasource.
please help me out.
help would be appreciable and carry reward.
Hi,
Create source system first.
you have to select the option "Database system (Data and meta data using SAP DB Connect)".
Now enter the database specific information.
DBMS:
Username:
Pwd:
Conn. Info:
Conn. Info should be the TNS name if it is oracle database.
after giving the relevent information save it, and come back. Source system will be created.
Now right click on source system and select the option " select Database Tables". it will show you the list of tables or views on that database.
select the table/view on which you need to create data source, and click on "edit datasource" there you can generate datasource.
after creating the datasource, replicate it... adn proceed.
any doubts plz ask me.
Message was edited by: suman dara
Similar Messages
-
Problem While creating DB connect source system to BW
Hi Guys,
While Creating DB sourc system in BW.The source system was not creating.
Sorcesystem-Create- selected the DB source system
Logical system: TAXIA03TST
Description:For Testing
DBMS:ORA
Username:
Pass word:
Given the ORA user name and password
Connection info:TAXIA03TST
After that it was saved.
After that it was going to the pop up screen Sytem log ,correct ,cancel
whe i select the correct,the source system was not created.
Can anybody help me out in creating the DB dource system.As it was very urgent.
points will be awarded.
Thanks,
VenkatHi,
This may help you to some extent:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Please check the SAP Note 339092
regards,
Pruthvi R -
How to create UD Connect Source system and datasources.
I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
Edited by: Amit Pal on Feb 19, 2008 6:17 AMHi,
Pls chk this link;
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
hope these helps,
Regards
CSM Reddy -
How to create a DB Source system in BW
Hi Guys,
Can anybody explain me how to create DB Connect source system in BW.
Points will be awarded.
Thanks,
ChinnaHi Chinna,
Below are the steps to be followed for the SS creation in BW :
Prerequisites :
1.System Number
2.System IP address
3.ALEOLTP like userid and password this is the RFC user ID in the R/3 system. Usually set to communication - must be set to dialog in the R/3 Source System for the duration of the create/restore connection process. Note: the password must be in capital letters.(If all instances are in unicode system)
1.At the time of making the connection, the R/3 source system will need to be opened for client independent configuration.
2.If it is a connection create or restore, the personal userid of the person doing the work must have SM59 access.
Follow the naming convention which is being used in your system.
1. Logon to r/3 source system using the r/3 RFC userid to check that the userid has been set to dialog user. It is mandatory that the r/3 source system userid be setup temporarily as dialog to create the connection. If not contact the requester to have this done before continuing with the next step.
Note: When re-checking to ensure that the r/3 userid is a dialog user, you may get prompted for new password. Change password, and make a note of the new password. Use this new password in the steps that follow for the r/3 RFC userid.
2. Logon to BW system using your own userid.
3. Enter transaction RSA1, In Source Systems, right-click on Source Systems as shown below to create new connection.
4. In the screen select the appropriate Source System connection type. Suppose your are creating connection for r/3 instance, so in this case we pick the very first option.
5. A popup window will get displayed asking for the necessary information. To fill in the appropriate information in the that screen you need the following information concerning the r/3 source system.
IP address (Application Server) &
System Number
Get this information for the r/3 source system from the SAP Logon Pad.
6. If Parameters have been incorrectly entered then the following error message will appear : Check connection parameters for the source system.
7. Re-check and re-enter correctly. If all is good then You will see the following prompt : Please log on as an administrator in the following screen.Click green check to continue.
8. This will bring you to the r/3 logon screen. Logon using the r/3 RFC id. Once logged on click Check in Check RFC destination dialog box.
9. Consider the r/3 RFC destination screen.
10. Check to make sure that BW system information (Userid, IP address, System Number etc) is correctly showing in the Technical Settings and Logon/Security tabs. Next do the following,
Step 1: Enter password for the BW RFC userid id.
Step 2: Save Settings
Step 3: From Test Menu , click on authorization. Ensure there are no errors
Step 4: Back out of screen.
11. System may ask you to logon as administrator again. Logon as in Step 10. This time click on Use in Check RFC destination dialog box.
Connection related processing will start up at this time, and continue for a little while (can be a couple minutes or more).
12. Subsequently, a dialog box will show up on the screen.
13. Pick option, Replicate As Well.
Replication and activation of data sources & transfer structures will begin.
With the completion of this step you will have successfully established this source system connection. To confirm, right-click on the new source system entry and click on check
14. If the connection is good, the following message with the source system ID will display at bottom left corner of screen : Source system connection is Ok.
Hope this will be helpful to you.
Thanks & Regards,
suchitra.V -
About creating a new source system on BW pointing to an Oracle database
hi friends
i m facing problems when i
creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
(1.) in /oracle/P01/102_64/network/admin tnsnames.ora I hava add
SJPT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = SJPT)
(2) and in etc/hosts I hava add
68.16.211.177 SJPT
(3) in p01adm> tnsping SJPT it is OK
(4)but when i
in BW RSA1 DATA SOURCE
create db connect:
DBMS: ORA
USER NAME: SAP
DB PASSWORD: SAP
[email protected]
i t give me the error message :
ORA-12154: TNS:could not resolve the connect identifier
please help meHI,my trans.log file is
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 13.11.2007 - 10:16:48
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 13 10:16:48 2007 81 0.000081
4 ETW000 [dev trc ,00000] db_con_init called 29 0.000110
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 50 0.000160
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
4 ETW000 43 0.000203
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000 13346 0.013549
4 ETW000 [dev trc ,00000] Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
4 ETW000 32 0.013581
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 35 0.013616
4 ETW000 [dev trc ,00000] Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
4 ETW000 53 0.013669
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 34 0.013703
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 53 0.013756
4 ETW000 [dev trc ,00000] New connection 0 created 23 0.013779
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.013818
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 45 0.013863
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 32 0.013895
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.013932
4 ETW000 [dev trc ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
4 ETW000 325 0.014257
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 47 0.014304
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 3234 0.017538
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 28 0.017566
4 ETW000 [dev trc ,00000] Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 34 0.017600
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 35 0.017635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000 36 0.017671
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 37 0.017708
4 ETW000 [dev trc ,00000] Allocating server context handle 24 0.017732
4 ETW000 [dev trc ,00000] Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
4 ETW000 72 0.017804
4 ETW000 [dev trc ,00000] Assigning server context 0x110fa6158 to service context 0x110f94398
4 ETW000 36191 0.053995
4 ETW000 [dev trc ,00000] Allocating user session handle 73 0.054068
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000 43 0.054111
4 ETW000 [dev trc ,00000] Assigning user session 0x110f937a0 to service context 0x110f94398
4 ETW000 10613 0.064724
4 ETW000 [dev trc ,00000] Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
4 ETW000 964 0.065688
4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-942 when accessing table SAPUSER
4 ETW000 1183 0.066871
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 73 0.066944
4 ETW000 [dev trc ,00000] Rolling back transaction ... 28 0.066972
4 ETW000 [dev trc ,00000] Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
4 ETW000 146 0.067118
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 409 0.067527
4 ETW000 [dev trc ,00000] Try to connect with default password 23 0.067550
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 34 0.067584
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 36 0.067620
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000 36 0.067656
4 ETW000 [dev trc ,00000] Assigning username to user session 0x110f937a0 22 0.067678
4 ETW000 [dev trc ,00000] Assigning password to user session 0x110f937a0 41 0.067719
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000 37 0.067756
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 33690 0.101446
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 36 0.101482
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#3 @ 431]
4 ETW000 122 0.101604
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
4 ETW000 34 0.101638
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'P01'" -
DB connect source system creation in BI
Hi,
I would like to create a DB connect source system to an external MSSQL 2005 database in RSA1.
The external MSSQL 2005 database is setup using Windows Authentication mode.
Question: Which user actually should I specify when creating the source system in RSA1? or which user should I assign the db_ddladmin role in the external MSSQL database?
Many thanks,
YJ.Hi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des. -
Change a migrated DataSource for DB Connect Source System
Hi,
I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
1. select database TableView
2. choose Edit DataSource
3. fill in the field Application Component (default stated NODESNOTCONNECTED)
4. generate datasource
Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
How can I do this ?
When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
Thank you in advance for your help. Kind regards, MinouschkaHello,
We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
Were you able to complete this and if so how did you do it?
Thank you,
Rick -
RFC destination BW could not be created in the source system R3073
I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanksHi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier. -
Are DB connect source systems also created in SM59 or just directly in RSA1? Thanks
Check out the following Links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
Step by step guide.
http://www.slideshare.net/blackwhites/sap-bw-connect-db -
Not display views/tables on DB connect source system
Dear Experts,
After creating a oracle DB connect source system, I want to create data sources based on oracle db. But it is not showing any view/table.
Connection is up and running.
Please advice.
Thanks,
ThiliniHi Thilini,
Are you sure that the DB user on Oracle has sufficient authorizations?
Does the search help support wildcards? Did you try w/o any wildcard or enter a table or a view name supplied by your Oracle DBA?
Best regards,
Sander -
Problem while creating JCA connection to MDM server
Hi All,
I have restarted my mdm connector(com.sap.mdm.tech.connector) along with the applications related to Enrichment Controller. All applications restarted successfully. After that I tried accessing the URL
http://MDMSERVER:50000/MDM_EnrichmentController/WorkflowPolling?process=Monitor
but I am getting following exception in this page
Polling Repository
name=Vijaybabu_Repo_on_MDMSERVER, status=No repository connection, error description=com.sap.mdm.net.ConnectionException: Problem while creating JCA connection to MDM server MDMSERVER
Enrichment Request Threads
Could somebody help me pointing if something I have missed..
Thanks and Regards,
Manojhi Swarna,
I have verified the repository and found 0 fatal errors, 0 non-fatal erros and 0 warnings. I also checked the MDM Factory and Connector service is running fine.
The detailed exception is
Sep 2, 2008 12:49:40 PM com.sap.mdm.logging.MdmLogger error
SEVERE: Problem while creating JCA connection to MDM server 'KOLAPON'
com.sap.mdm.net.ConnectionException: Can not resolve JCA connection
at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:119)
at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnectionAccessor(JcaConnectionUtil.java:62)
at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:70)
at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:59)
at com.sap.mdm.repository.commands.GetRepositoryStatusCommand.execute(GetRepositoryStatusCommand.java:67)
at com.sap.mdm.enrichment.common.ECAdminUtils.getRepositoryStatus(ECAdminUtils.java:125)
at com.sap.mdm.enrichment.common.EnrichmentUtils.validateRepostiryConfiguration(EnrichmentUtils.java:889)
at com.sap.mdm.enrichment.common.EnrichmentUtils.getCatalogManager(EnrichmentUtils.java:144)
at com.sap.mdm.enrichment.workflowpolling.PollingThread.getCatalogManager(PollingThread.java:166)
at com.sap.mdm.enrichment.workflowpolling.PollingThread.run(PollingThread.java:102)
Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:223)
at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:108)
... 9 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:213)
... 10 more
Regards,
Manoj
Edited by: Manoj Kumar Nanda on Sep 2, 2008 9:21 AM -
How to create file type source system connection
Hi All,
I have to load data from Flat files , but when i checked the source system connections File type source system connection is not present. Please guide me how can i create the same.
ApoorvaHi Apoorva,
Goto RSA1 -> Source System -> Right Click on File Folder .-> Create -> Logical system Name as FLAT FILE -> Source system name is the description for this source -> Enter.
Once it is created you can right click from that file and check whether it has created properly or not.
When u r moving the objects which are created under this source, the same flat file source should have been created in the target system also. And check for the entry in the target system table RSLOGSYSMAP for the flat file when u r moving the flat file objects.
Regards,
Muthu. -
Error while Creating Flat file Source System
Hi Friends,
The message "No entry for BW_USER in table RSADMIN available" is shown when I try to create a Source System for File System(Manual Metadata, Data using File Interface). Could somebody help me please.
Thanks in advance.
Hanuma ReddyHi,
I have solved this problem from SDN by seeing below reply to some others question. Thanks Ajay.
I think this problem comes if you have used more than one client in BW (for example if you logged on to 000 and ran admin workbench initially after installation, and then if you prepared another client for use as BW client).
Look at OSS note 410952, it mentions of the same error. The fix as mentioned in the note is as follows
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors. -
RFC destination BW could not be created in the source system
Hi,
Recently I installed BI 7.0 on Win 2003 and try to create a SAP system in RSA1.
I try to connect R/3 system (on UNIX) and getting RFC connection error u201CRFC user logon failed. Check the connection.u201D & u201CRFC destination BW could not be created in the source systemu201D. However, I test the connection and it is working fine.
Please suggest the solution.
Regards,
RajeshRajesh,
Answer is very simple. I did get same kind of problem. It is very simple answer depending on your R3 version.
Use password all capital letters. Don't include any small letter at all. unlock your user id and change password to capital letter. BW doesn't like small and capital letter mix. this bug is fixed in ECC 6.0
<removed_by_moderator>
*Do not ask for points
Read the "Rules of Engagement"
Regards
RK
Edited by: Juan Reyes on May 21, 2009 9:30 AM -
DB Connect Source System Creation
Hi,
I am trying to create source system (DB Connect) to extract data from SQL Server to BI.
I had user id/pwd in DB who is authorised to read view created by DB personnel.
n BW Description of Database Connections Screen
There are two fields
CONN.INFO and PERMANENT
What is the functionality of those 2 fields and from where can i get CONN.INFO
Thanks
KrishnaHi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des.
Maybe you are looking for
-
Questionnaire about AppleTV disappears or does not synch with iTunes
Hi, I'm heavily investigating the source of this common problem. There are several posts here stating that one solution could be to use a wired connection. As I'm using such a wired connection and have still this problem, I cannot subscribe this. My
-
In-App-Purchase-Air-Ios (extension inside, need help on how to use it :P)
Code examples: http://code.google.com/p/in-app-purchase-air-ios/w/list Extension download: http://code.google.com/p/in-app-purchase-air-ios/downloads/list How do I use this with my Flash CS5.5 Pro (IDE)? They show examples with using ADT command line
-
Parse a webpage and return all the URLs mms://***.wmv
Hello, I would like to create a small script to parse http://jt.france2.fr/20h/ in order to extract the latest News program available: i.e.: mms://a988.v101995.c10199.e.vm.akamaistream.net/7/988/10199/3f97c7e6/ftvigrp.download.akamai.com/10199/cappuc
-
How to account for and set the temperature in testing
The problem is this: I'm setting up an airflow resistance test and I need to account for temperature and barometric pressure. However, I don't know how to setup LabVIEW to account for these variables.
-
Why is my Time Machine backup so much larger than the files being backed up?
Mac Mini Server 10.7.1 on a 2011 Mac Mini Server Here are the drives on my system: Here are the items excluded from backup: Note that Server HD and Archive are the only non-excluded disks and the estimated backup size is 563.2 GB (this corresponds wi