JDeveloper and Team System Extension not working

I am using JDeveloper 11g (11.1.1.1) and latest VSTS extension. The Team System extension does not work.
Here are what I have done:
1) Install JDev, JDev team system extension, TFS team explorer.
2) Workspace created in Team Explorer.
3) JDev Versioning control set for Team system. Select workspace, refresh it.
4) Create a new application/project under team explorer workspace. In Application explorer, The application and project showed up with a "X" mark - not in source control.
5) Add the application/project into source control. Succeeded.
6) But - the application and project still show up with "X" mark. Trying to add again, JDev pop up error message: "file already exists in source control". Files still show up in pending changes window.
I am using windows XP SP2 for development.
Any ideas? Please, this is urgent.
Edited by: user8658859 on 2009/9/24 上午 2:55

I am betting you are running 4.3? I just upgraded my GS3 to 4.3 and now I can't get the GMail smart extension to work. Previously, I was able to on the same phone (but running 4.1.2) but couldn't use WatchIt. Now I can use WatchIt, but can't use Gmail. How frustrating!!

Similar Messages

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

The connectivity between ABAP and JAVA system is not working properly.

Hi,
I have Installed ECC5.0 ABAP system and Netweaver JAVA system with different SID's in single box. While Installing JAVA systen I have selected UME as ABAP system and Installation was success. Once I restart MMC the JAVA server process thowing an rc -11113.
I have pasted trace file for Server process. Please send me any suggestions ASAP.
[Thr 4500] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4500] JLaunchISetClusterId: set cluster id 31689350
[Thr 4500] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4500] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 4180] Thu Apr 19 12:06:29 2007
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
[Thr 4748] Thu Apr 19 12:06:30 2007
[Thr 4748] JLaunchIExitJava: exit hook is called (rc=-11113)
[Thr 4748] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 940893 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 4748] JLaunchCloseProgram: good bye (exitcode=-11113)
Thanks,
Suraj

Hi,
It clearly says the problem is with virtual memory. SO you need to change your virtual memory settings using configtool.
See the relevant note.940893
Make changes in the VM parameters for Bootstarp, Dispatched and the server nodes. Your -Xms should be less than equal to -Xmx.
Restart the cluster then.
It should work.
Do reward good points.

Bluetooth and keyboard system preferences not working

Hi all,
When I try to change the keyboard system preferences or the bluetooth system preferences, the 'application' locks up (Doesn't bring up any details, force quit gets out of it). I've tried leaving it for ages to see if it eventually opens but it doesn't.
This means I can't use any bluetooth devices or change the keyboard shortcuts.
It only happens on one of my otherwise identical Mac Pros; the other is fine.
Any clues as to how to repair it? I could try reinstalling Snow Leopard, but I'd rather try ditching a preference file first.
Thanks in advance,
Simon.

Hi all,
When I try to change the keyboard system preferences or the bluetooth system preferences, the 'application' locks up (Doesn't bring up any details, force quit gets out of it). I've tried leaving it for ages to see if it eventually opens but it doesn't.
This means I can't use any bluetooth devices or change the keyboard shortcuts.
It only happens on one of my otherwise identical Mac Pros; the other is fine.
Any clues as to how to repair it? I could try reinstalling Snow Leopard, but I'd rather try ditching a preference file first.
Thanks in advance,
Simon.

I'm running V10.6.8 and the system is not recognizing a San Disc adapter that I plug into the side of the keyboard. This always worked in the past. Whats changed?

I'm running V10.6.8 and the system is not recognizing the presence of a San Disc (SDHC) adapter that I plug into the left side of the keyboard. This always worked in the past. Whats changed? I can't upload my images to a folder.

Another item I'd found when getting an SD card for an older camera was the lack of backward support from the SD card if it was too new, while a newer camera can sometimes use an older SD card at a slower read-write speed. There are limits and ceilings on what kind of card works with old/new stuff.
So I ended up taking a nice SD card back to one store and had to settle on a 'walmart kinda dubious kingston two pack a cure' for the older Panasonic Lumix. Smaller capacity but seems to work OK for the era. I don't trust kingston with macs, but this 10 y/o Lumix seems to not care about that.
Hopefully you can obtain the correct cards, because some stores only sell parts for their inventory of cameras. And some adapters are limited too.
Depending on what I'm doing with the card and the camera it goes with, I attach the camera to the computer and not just the card in a reader. That way I can file items inside the camera SD card in a way the camera won't overwrite them. Later when I save everything from the card into an external hard disk drive, all my filed folders of images by date (I created in the SD) appear in order, in the later archive. Easier too, when I burn to DVD or CD media, to create yet another archive away from the computer or the camera.
Good luck & happy computing!

IPhone 5 and iPad 2 Bluetooth not working since IOS8.0 update unable to make calls through Bluetooth system in Mazda 3 and unable to connect iPad to wifi printer

Since recent IOS 8.0 updates Bluetooth on my iPhone 5 and iPad 2 is not working cannot make calls through car Bluetooth system and cannot use Bluetooth to connect to other devices on my iPad

Hi there Annapana,
You may find the troubleshooting steps for bluetooth connections in the article below helpful.
If you can’t use a Bluetooth accessory or car kit
-Griff W.

My ipad 2 is frozen, the email system was not working so i tried to turn it off and start again but it has refused to power down

My Ipad 2 mail system was not working so i tried to power down to restart again but it has refused to power down and it also refuses to come on. i have held the power button for over a minute but there is no response.

Have you tried basics from the manual?
Restart 0- you tried.
Reset?
Restore?
iPad 2 User Guide (For iOS 4.3 Software)

HT5654 i updated my ipad 3 to latest version of system upgrade and now it is not working at all. it just shows an itunes logo. I have tried restarting.

i updated my ipad 3 to latest version of system upgrade and now it is not working. All black screen with Itunes logo. I tried restarting

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

"Bookmarks and history system will not be functional" with corrupt files found by Avast and websites loading slow ONLY in Firefox

Firefox is the only browser that lets me connect with my microphone. I need to use this feature for an online class. Earlier this evening, the message prompting me to allow or deny the class website permission to use the microphone stopped appearing, and without it the recording won't pick up any sound and I can't record anything.
I tried exiting and restarting Firefox. I had some extensions in use at the time, in particular Session Manager. The allow/deny message still wouldn't appear, so I restarted my computer.
Now when I open Firefox I see the "The bookmarks and history system will not be functional" error message. In addition, the browser loads websites extremely slowly; it takes several minutes to load each page or for me to be able to click on anything (the URL bar, the menus, etc) My other browsers (Internet Explorer and Chrome) are running normally and load websites at a normal speed. I tried downloading the latest version of Firefox but it didn't fix anything. I also tried restarting the computer again but that didn't help either.
I ran my Avast software system check and it turned up that the following files under "C:\Users\(me)\AppData\Roaming\Mozilla\Firefox\Profiles\Irozixj7.default" are "corrupted and unreadable":
-cookies.sqlite-shm
-cookies.sqlite-wal
-localstore.rdf
-places.sqlite-shm
There was one more problem on the scan, but it probably isn't relevant: for the file "C:\ProgramData\Microsoft\Windows Defender\Definition Updates\{9A2C6FA7-E04E-4819-B86A-8363A9D1E42A}\mpengine.dll" it says "The system cannot find the path specified." When I attempted to follow the path indicated, one of the folders (I can't remember which) said something along the lines of "You can't access this folder, do you want to permanently allow access to this folder?" I said yes and was able to access the folder.
I have tried to add the Places Maintenance extension but the speed is too sluggish to download anything. Trying to access any of the menus results in the browser freezing for several minutes then unfreezing but with the menu still unopened. Therefore none of the solutions found here (https://support.mozilla.org/en-US/kb/fix-bookmarks-and-history-will-not-be-functional?esab=a&as=aaq) seem to work.
My questions are as follows:
-Is it possible to figure out what caused the problem in the first place?
-Is there a way for me to fix it without losing my bookmarks and history?
-How can I avoid this happening again in the future?

First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder. To quickly access this folder:
Help > Troubleshooting Information > "Show Folder" button
Next, keep this folder open, exit Firefox, and try moving the "corrupted and unreadable" files to a different folder. With the exception of localstore.rdf, which stores window positions, toolbar customizations, and other nonessential data, the other files appear to be session-specific files that hopefully are not critical. If you restart Firefox, does it behave more normally?
If not, try creating a fresh Firefox profile. It will have the Flash plugin, which is the control sites usually use to connects your camera and/or microphone, and other plugins, but otherwise will be a new setup. This article has the steps for starting up in the Profile Manager: [[Use the Profile Manager to create and remove Firefox profiles]].
If sites work normally in the new profile, you can import your bookmarks from your old profile, as well as copying over other files that don't seem to be causing the problem. Some trial and error might be required to determine that. This article has some tips: [[Recovering important data from an old profile]].
If the new profile is no better, you can exit Firefox and use the Profile Manager to switch back to your original profile.
Any improvement?

HDMI and PC inputs do not work on my 37AV502R LCD TV

HDMI inputs and PC inputs do not work consistently
my Apple TV (HDMI) and computers 2 on HDMI, 1 on PC, display just fine n the TV but after a while the TV goes blank,
the time is not consistent sometime a few minutes, sometimes a few hours,
but every time, after the TV goes blank there is nothing I can do, the TV just stays blank, if I unplug and turn back on the TV displays the image for a split second and goes bank again,
I thought it might be an overheating thing, however sometimes the PC input will stop working but the HDMI input (either one) will work fine,
has anyone else had this issue?
Thanks
A.

I'm having the same issue. As soon as I connect it to VGA or HDMI, it goes into a cycle of flashing on-and-off. A guy on youtube had the same problem (posted a video identical to my problem) and reportedly fixed it with a firmware update.
The problem: the US website doesn't have a firmware download. The canadian website does, but the update is from 4/2009, and the manufactured date on the back of my TV is 5/2009. (I also tried the update, but it didn't fix the problem).
When I call Toshiba to ask about the firmware update, after they confirm I am out of warranty, their automated system keeps hanging up on me. So frustrating.

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Please is an emergenci!!! I put my iPhone 5 to charge and the cable is not working I tried in other pluggers in the house but nothing I don't know what's wrong and I don't have any more battery

Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?

@whimsei,
Hello and thank you for posting back. What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
To fix this it would have to be opened up and the connections checked. If there is an issue with the cable then it would have to be replaced. This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
Here is the link to the maintenance and service guide. If you feel comfortable doing the work it will help you.
HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
Maintenance and Service Guide
If you want to send it in for repair here is how.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

System.out not working on eclipse

Greetings...
I am no longer a newbie on Java, but I have been facing an issue lately that I have been unable to resolve myself, even though it seems to be something so silly.
I have been using eclipse for development, and by developing a simple "Just to practice" code I have found myself unable to use System class or any of its methods at a certain point. See the code below:
package one;
import java.util.Scanner;
public ClassOne {
public static void main (String args[]){
Scanner reader = new Scanner(System.in); /*Works just fine here*/
int x = 0;
System.out.println("Type in the number of objects expected"); /*Does not work at all, like if System was something I could not use at all. Not an identifier */
Scanner readertwo = new Scanner(System.in); /*System does not work here either*/
}Even if I rewrite the code after that, by erasing the import statement and all other System references in the code, System does not work again.
If anybody has ever faced the same issue and knows what I am doing wrong and what I can do to fix it, I'd really be grateful.
Thanks to all, and happy 2009.
Santana T

Santana_Thiago wrote:
It works on NetBeans.
On eclipse I get the following error:
ERROR: JDWP Unable to get JNI 1.2 Environment, jvm->GetEnv() return code = -2+
*JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820]*+
The funniest thing is that if copy and paste the code from somewhere else into eclipse it works. What a drag!!!!
Thank you.
Santana TNever seen that error but it sounds to me that your Eclipse installation is screwed up!

Just got this Laptop and the audio is not working for videos

My operating system is Windows 8.1 with Bing. I just got this laptop computer for my college work and love it, but my audio does not work when I watch Videos. The laptop makes a weird tappign noise often. I need my audio to work for my course work online. The audio when I watch videos online either does not work at all or it breaks up as I am handling the laptop in the m hands. I have already did troubleshooting tests on the laptop and it can not find any problems but I know something is not right due to the noise and now my audio not working Please help me or tell me how HP can fix my laptop in a speedy mannor. It needs to go to the shop. That noise irritates me and I know that any kind of laptop pc is not suppose to make noises like that. The audio must work for my to complete my college homework and classwork online.
Thank you for any assistance you may be able t give me. Lindsay

Scroll down on the page and fill out the form to contact HP Warranty Support:
https://support.hp.com/us-en/contact-hp/product/HP-15-r000-Notebook-PC-series/6875200/model/7531307
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

JDeveloper and Team System Extension not working

Similar Messages

Maybe you are looking for